Commit graph

116 commits

Author SHA1 Message Date
Veerendranath Jakkam
3790f3a6ee Use per-interface type driver key_mgmt capabilities when possible
Use key_mgmt_iftype instead of key_mgmt when the specific interface type
is known by the context of the operation.

Use per interface type AKM capabilities in capa.key_mgmt_iftype array
based on the wpa_supplicant context instead of using capa.key_mgmt to
determine the driver AKM capability.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-05-12 17:33:54 +03:00
Jouni Malinen
db59827a3c DPP2: Extend TCP encapsulation case to support Configurator as Initiator
This allows DPP_AUTH_INIT to be used with tcp_addr=<dst> argument and
Configurator parameters to perform Configurator initiated DPP
provisioning over TCP. Similarly, DPP_CONTROLLER_START can now be used
to specify Configurator/Enrollee roles and extend Controller to work in
Enrollee role.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-12 14:48:49 +03:00
Jouni Malinen
670e153377 DPP2: Fix DPP_CHIRP listen parameter value validation
Check the correct variable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:28:09 +03:00
Jouni Malinen
182f6ae905 DPP2: Remove reconfigured network
Do not leave behind the old network profile when reconfiguration is
completed successfully.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
3e48c5d4b4 DPP2: Reconfig Authentication Confirm processing
Extend Enrollee functionality to process Reconfig Authentication
Confirm message and start GAS client.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
24b01c706b DPP2: Reconfig Authentication Response processing and Confirm generation
Extend Configurator functionality to process Reconfig Authentication
Response message, derive the needed keys, and generate Reconfig
Authentication Confirm message.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:09 +03:00
Jouni Malinen
65e94351dc DPP2: Reconfig Authentication Request processing and Response generation
Extend Enrollee functionality to process Reconfig Authentication Request
message, derive the needed keys, and generate Reconfig Authentication
Response message.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
3774b6bd03 DPP2: Reconfig Authentication Request generation and transmission
Extend Configurator functionality to sign a special Connector for
reconfiguration and reply with Reconfig Authentication Request frame
when Reconfig Announcement frame is received with a matching C-sign key
hash value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
66ac616cdb DPP2: Process received Reconfig Announcement frame
Check if there is a matching Configurator and be ready to initiate
Reconfig Authentication (which itself is not included in this commit).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
0c043d9de7 DPP2: Reconfig Announcement transmission
Extend DPP chirping mechanism to allow Reconfig Announcement frames to
be transmitted instead of the Presence Announcement frames. Add a new
wpa_supplicant control interface command "DPP_RECONFIG <network id>" to
initiate reconfiguration for a specific network profile.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
0a488ef35c DPP: Track ending time for remain-on-channel operations
This may be needed to optimize use of offchannel TX operations with
wait-for-response when near the end of a pending remain-on-channel
operation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-09 17:32:26 +03:00
Jouni Malinen
12c8eacf73 DPP: Allow version number to be overridden for testing purposes
"SET dpp_version_override <ver>" can now be used to request
wpa_supplicant and hostapd to support a subset of DPP versions. In
practice, the only valid case for now is to fall back from DPP version 2
support to version 1 in builds that include CONFIG_DPP2=y.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:45 +03:00
Jouni Malinen
1f5f000086 DPP2: Try to negotiate PFS only if AP supports version 2 or newer
Check AP's DPP Protocol Version during network introduction and mark the
PMKSA cache as suitable for PFS use with version 2 or newer. This avoids
unnecessary attempt of negotiating PFS with version 1 APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:44 +03:00
Jouni Malinen
42acf1292d DPP2: Add Protocol Version attribute to network introduction messages
This can be used to determine whether to try to negotiate PFS (only
available with version 2 or higher).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:44 +03:00
Jouni Malinen
0c5edededa DPP: Fix config exchange with gas_rand_mac_addr
Do not use a random MAC address for the GAS exchange that is used as
part of the DPP protocol exchange since that would break DPP.
Configurator expects the same MAC address to be used for DPP
Authentication exchange and DPP Configuration exchange (GAS).

Since the DPP Authentication exchange has already used the MAC address
configured on the interface, use of a random address for the GAS
exchange would not provide any additional privacy protection. If a
random MAC address needs to be used for this type of an exchange, that
random address would need to be first configured on the interface before
starting DPP exchange.

This does not change GAS query behavior for any other use case, i.e.,
the gas_rand_mac_addr configuration continues to apply to all the
Interworking/Hotspot 2.0 uses.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-22 17:09:01 +03:00
Jouni Malinen
4d2ec436e3 DPP: Add driver operation for enabling/disabling listen mode
This can be used to configure RX filter to be able to receive broadcast
DPP Public Action frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-20 23:52:04 +03:00
Jouni Malinen
512b6c02e0 DPP: Mandate mutual auth with NFC negotiated connection handover
Mark own bootstrap information as having been used in NFC negotiated
connection handover and do not accept non-mutual authentication when
processing Authentication Response from the peer when such bootstrapping
information is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-03 16:27:52 +03:00
Jouni Malinen
e4eb009d98 DPP2: Add Connector and C-sign-key in psk/sae credentials for reconfig
If the Enrollee indicates support for DPP R2 or newer, add Connector and
C-sign-key in psk/sae credentials (i.e., cases where DPP AKM is not
enabled) for reconfiguration. Extend processing of such credentials in
wpa_supplicant network profile addition to handle this new case
correctly by not setting key_mgmt=DPP based on Connector being present,
but by looking at the actual akm value in the config object.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-02 21:34:49 +03:00
Jouni Malinen
1dcfbab254 DPP2: Clear requirement for QR Code mutual authentication for chirping
The chirping cases are not really targeting interactive operations, so
clear the requirement for mutual authentication when DPP_CHIRP command
is used. This avoids testing isues where an earlier DPP_LISTEN command
has used qr=mutual parameter and that seting not getting cleared before
the next DPP_CHIRP command is used.

This fixes a test case failure in the following test sequence:
dpp_auth_resp_status_failure dpp_controller_relay_chirp

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-01 17:19:10 +03:00
Jouni Malinen
06dd32903d DPP2: Presence Announcement processing at Configurator
Process received Presence Announcement frames and initiate
Authentication exchange if matching information is available on the
Configurator.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-27 20:05:25 +02:00
Jouni Malinen
562f77144c DPP2: Chirping in wpa_supplicant Enrollee
Add a new wpa_supplicant control interface command "DPP_CHIRP own=<BI
ID> iter=<count>" to request chirping, i.e., sending of Presence
Announcement frames, to be started.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-27 20:05:25 +02:00
Jouni Malinen
514cc49ba5 DPP: Store global pointers in struct dpp_authentication
Set the global pointer and msg_ctx when allocating struct
dpp_authentication instead of needing to pass these to
dpp_set_configurator().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-27 17:44:06 +02:00
Jouni Malinen
c304bddcf9 DPP: Stop Action frame sequence on DPP_STOP_LISTEN and PKEX failure
Previously it was possible for the PKEX/DPP exchange to terminate with
an error and the ongoing Action frame TX/RX offchannel operation not
getting terminated. This could leave the driver waiting on offchannel
until timeout and failing following operations before that timeout
happens. Fix this by explicitly stopping the Action frame sequence in
the driver in the previously missed cases.

This fixes a case that was showing up with the following test sequence
every now and then:
dpp_qr_code_chan_list_unicast dpp_pkex_test_fail dpp_enrollee_reject_config

dpp_pkex_test_fail was adding a large number of pending offchannel
operations and dpp_enrollee_reject_config could fail if those pending
operations were blocking new remain-on-channel or offchannel TX
operation for a sufficiently long time.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-11 07:09:47 +02:00
Jouni Malinen
c7cc80fbc8 DPP: Reset DPP_AUTH_INIT netrole back to STA by default
Previously DPP_AUTH_INIT command update wpa_s->dpp_netrole only if the
netrole parameter was included. This could leave AP or configurator
network in place for the next DPP_AUTH_INIT command. This would be
unexpected behavior, so reset wpa_s->dpp_netrole back to the
DPP_NETROLE_STA default if no explicit netrole parameter is included.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-11 06:33:24 +02:00
Jouni Malinen
7d9e320054 DPP: Received Configurator backup processing
Add local Configurator instance for each received Configurator backup.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-31 23:16:05 +02:00
Jouni Malinen
5e287724ee DPP: NFC negotiated connection handover
Add new control interface commands "DPP_NFC_HANDOVER_REQ own=<id>
uri=<URI>" and "DPP_NFC_HANDOVER_SEL own=<id> uri=<URI>" to support NFC
negotiated connection handover. These commands are used to report a DPP
URI received from a peer NFC Device in Handover Request and Handover
Select messages. The commands return peer bootstrapping information ID
or FAIL on failure. The returned ID is used similarly to any other
bootstrapping information to initiate DPP authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-27 20:36:09 +02:00
Jouni Malinen
9be30ffc13 DPP: Abort ongoing scan if connection status needs to be sent
Ongoing scan could prevent the station Enrollee from sending out DPP
connection status after the 15 second timeout and that would result in
the Configurator timing out on the wait for the status report. Abort any
ongoing scan, if needed, to avoid this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:51:59 +02:00
Jouni Malinen
5661ebd774 DPP: Configurator netRole for Enrollee
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
7404574458 DPP: Replace ap boolean with netRole enum in Configurator params
The netRole enum is more generic and can be extended to include new
roles (e.g., Configurator) more easily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
e780b4bf20 DPP: Bootstrapping via NFC URI Record
This extends hostapd and wpa_supplicant DPP implementation to allow the
bootstrapping URI to be generated for and parsed from an NFC Tag with an
NFC URI Record. This is similar to the way the bootstrapping URI is used
with QR Code for unidirectional authentication.

The DPP_BOOTSTRAP_GEN command uses "type=nfc-uri" to request the URI to
be assigned for NFC URI Record. In practice, the URI is generated
identically to the QR Code case, but the internal entry maintains the
NFC-URI type.

A new command "DPP_NFC_URI <uri>" can now be used to parse the URI read
from an NFC Tag with the NFC URI Record. This is similar to the
DPP_QR_CODE command.

Other commands (mainly, DPP_LISTEN and DPP_AUTH_INIT) are used for NFC
URI in the same way as they are used for QR Code.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 12:37:51 +02:00
Jouni Malinen
181bf93363 DPP2: Report received ssid_charset as DPP-CONFOBJ-SSID-CHARSET event
This provides the SSID character set, if specified, to upper layers on
station Enrollee.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-28 16:39:09 +02:00
Jouni Malinen
52d469de11 DPP2: Support multiple Config Objects in Enrollee
Process all received DPP Configuration Object attributes from
Configuration Result in Enrollee STA case. If wpa_supplicant is
configured to add networks automatically, this results in one network
being added for each included Configuration Object.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
8f8c423a51 DPP: Add bandSupport JSON array into config request
Indicate supported global operating classes when wpa_supplicant is
operating as an Enrollee.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00
Jouni Malinen
5a5639b068 DPP: Allow name and mudurl to be configured for Config Request
The new hostapd and wpa_supplicant configuration parameters dpp_name and
dpp_mud_url can now be used to set a specific name and MUD URL for the
Enrollee to use in the Configuration Request. dpp_name replaces the
previously hardcoded "Test" string (which is still the default if an
explicit configuration entry is not included). dpp_mud_url can
optionally be used to add a MUD URL to describe the Enrollee device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00
Jouni Malinen
16ef233bf1 DPP2: Connection status result (Enrollee)
Add support for reporting connection status after provisioning if the
Configurator requests this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-16 17:25:34 +03:00
Jouni Malinen
b10e01a795 DPP2: Connection status result (Configurator)
A new argument to the DPP_AUTH_INIT command (conn_status=1) can now be
used to set Configurator to request a station Enrollee to report
connection result after a successfully completed provisioning step. If
the peer supports this, the DPP-CONF-SENT event indicates this with a
new argument (wait_conn_status=1) and the Configurator remains waiting
for the connection result for up to 16 seconds.

Once the Enrollee reports the result, a new DPP-CONN-STATUS-RESULT event
is generated with arguments result, ssid, and channel_list indicating
what the Enrollee reported. result=0 means success while non-zero codes
are for various error cases as specified in the DPP tech spec. If no
report is received from the Enrollee, the event with "timeout" argument
is generated locally.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-16 17:13:46 +03:00
Jouni Malinen
422e73d623 DPP: Indicate authentication success on ConfReqRX if needed
It is possible to receive the Configuration Request frame before having
seen TX status for the Authentication Confirm. In that sequence, the
DPP-AUTH-SUCCESS event would not be indicated before processing the
configuration step and that could confuse upper layers that follow the
details of the DPP exchange. As a workaround, indicate DPP-AUTH-SUCCESS
when receiving the Configuration Request since the Enrollee/Responser
has clearly receive the Authentication Confirm even if the TX status for
it has not been received.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-05 13:31:14 +03:00
Jouni Malinen
2a5a068086 DPP2: wpa_supplicant as TCP initiator
A DPP TCP connection can now be initiated directly from wpa_supplicant
with the new new tcp_port and tcp_addr parameters to the DPP_AUTH_INIT
control interface command. This initiates DPP Authentication exchange
over TCP with the specified Controller instead of using DPP Public
Action frames over WLAN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Jouni Malinen
c02dd10d76 DPP2: wpa_supplicant as Controller over TCP
New wpa_supplicant control interface commands "DPP_CONTROLLER_START
[tcp_port=<port>]" and "DPP_CONTROLLER_STOP" can be used to start and
stop listening to DPP requests over TCP in the Responder role. The TCP
connections are processed similarly to the ones that would have been
received over DPP Public Action frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Jouni Malinen
2ed2b52ff5 DPP: Add configuration structure to dpp_global_init()
This can be used to provide configurable parameter to the global DPP
context. This initial commit introduces the msg_ctx context pointer for
wpa_msg().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-21 21:35:32 +03:00
Jouni Malinen
bd23daa8e6 DPP: Move GAS encapsulation into dpp_build_conf_req()
Avoid duplicated code in each user of dpp_build_conf_req() by moving the
common encapsulation case into this helper function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 19:10:47 +03:00
Jouni Malinen
87d8435cf9 DPP: Common configurator/bootstrapping data management
Merge the practically copy-pasted implementations in wpa_supplicant and
hostapd into a single shared implementation in dpp.c for managing
configurator and boostrapping information. This avoid unnecessary code
duplication and provides a convenient location for adding new global DPP
data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-24 17:29:45 +02:00
Jouni Malinen
10ec6a5f38 DPP2: PFS for PTK derivation
Use Diffie-Hellman key exchange to derivate additional material for
PMK-to-PTK derivation to get PFS. The Diffie-Hellman Parameter element
(defined in OWE RFC 8110) is used in association frames to exchange the
DH public keys. For backwards compatibility, ignore missing
request/response DH parameter and fall back to no PFS in such cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
18015fc8a4 DPP2: Support new legacy+DPP config object credentials
This allows devices supporting DPP protocol version 2 or newer to
provision networks that enable both the legacy (PSK/SAE) and DPP
credentials.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:06 +02:00
Jouni Malinen
dd6c598007 DPP: Support DPP and SAE in the same network profile
Make both DPP and SAE code aware of the cases where the same network
profile is configured to enable both DPP and SAE. Prefer DPP over SAE in
such cases and start DPP/SAE exchanges based on what both the station
and the AP support.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 17:29:59 +02:00
Jouni Malinen
9305c2332b DPP: Clean up configuration parsing
Share a single parsing implementation for both hostapd and
wpa_supplicant to avoid code duplication. In addition, clean up the
implementation to be more easily extensible.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 17:29:59 +02:00
Jouni Malinen
67b3bcc954 DPP2: Testing option for Config Object rejction
Add a new testing option to force Enrollee to reject the receive Config
Object.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 00:31:09 +02:00
Jouni Malinen
22f90b32f1 DPP2: Configuration Result message generation and processing
Use this new message from Enrollee to Configurator to indicate result of
the config object provisioning if both devices support protocol version
2 or newer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 00:31:09 +02:00
Jouni Malinen
954c535a50 DPP: Update wpa_supplicant configuration file after provisioning
WPS was already doing this if update_config=1 was set and DPP should be
consistent with that behavior. Update the configuration file if
update_config=1 and dpp_config_processing is set to 1 or 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 16:21:54 +02:00
Jouni Malinen
d8c20ec591 DPP: Clear dpp_listen_freq on remain-on-channel failure
If the DPP_LISTEN command failed due to the driver rejecting the
remain-on-channel request, wpa_s->dpp_listen_freq was left set to the
requested listen frequency and this resulted in the next DPP_LISTEN for
the same frequency reporting "DPP: Already listening on .." even when
the driver was not really listening on that frequency. Fix this by
clearing wpa_s->dpp_listen_freq in the error case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-30 12:28:43 +02:00