Commit graph

28 commits

Author SHA1 Message Date
Jouni Malinen
97ad4d2071 tests: Increase timeout in ap_vlan_iface_cleanup_multibss*
If the kernel is built with CONFIG_DEBUG_KOBJECT_RELEASE=y, the cleanup
steps were taking so long that these test cases could fail.

Fix this by increasing the timeout to avoid reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:42:05 +02:00
Jouni Malinen
44785ff27b tests: hostapd vlan_file/mac_file parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:47:00 +02:00
Jouni Malinen
09b306b1e5 tests: Avoid failures in ap_vlan_without_station with new kernel
The kernel commit 'mac80211: filter multicast data packets on AP /
AP_VLAN' started filtering out the test frame used in
ap_vlan_without_station and that resulted in false failures. For now,
ignore that "error" case to avoid claiming failures when the kernel is
doing what it is expected to do.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 21:37:19 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Janusz Dziedzic
50e49cd240 tests: Use hapd from hostapd.add_iface()
Since add_iface() now returns the correct hapd, just use it.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:26:25 +03:00
Janusz Dziedzic
29444a0863 tests: Pass apdev to hostapd.add_iface()
Pass apdev param to hostapd.add_iface() to support operation with a
remote test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:58:55 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Michael Braun
6556ddaf49 tests: Verify correct VLAN operation after reconnect
This adds a test case ap_vlan_reconnect. It connects, disconnects, and
reconnects a station in a VLAN. This tests for a regression with
wpa_group entering the FATAL_FAILURE state as the AP_VLAN interface is
removed before the group was stopped.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 15:25:33 +02:00
Michael Braun
3fdb5005f5 tests: Tagged-VLAN only change on reauthentication
Check VLAN ID change during reauthentication when using tagged-only
configuration.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-27 21:49:27 +02:00
Michael Braun
732bbcc709 tests: Verify connectivity with untagged/tagged VLAN mixed configuration
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:13 +02:00
Michael Braun
57af507ea7 tests: Untagged VLAN ID with EGRESS_VLANID RADIUS attribute
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:13 +02:00
Michael Braun
571e690775 tests: STA assigned to vif under per_sta_vif
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:13 +02:00
Michael Braun
a8c235ee62 tests: Verify ap_vlan_iface_cleanup_multibss with per_sta_vif
This adds a new test case to run ap_vlan_iface_cleanup_multibss with
per_sta_vif enabled.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:13 +02:00
Michael Braun
629d369674 tests: Verify tagged-only connectivity
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:13 +02:00
Michael Braun
ee2b0d19f5 tests: Verify group encryption is set up for VLANs early
Check that there are no unencrypted frames when using hostapd with VLANs
and WPA before the first station connects to the VLAN.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-10-06 01:25:39 +03:00
Michael Braun
54cf411f4c tests: Verify correct VLAN operation in multi-BSS multi-VLAN case
This adds hwsim test ap_vlan_iface_cleanup_multibss. It connects two
stations in different BSS but the same hostapd process. First both
stations are in VLAN 1, then they get reauthenticated into VLAN 2. Due
to the ordering of the stations moving around, this test checks that
bridge and tagged interface referencing counting is done globally, such
that the tagged interface is not removed too early and no bridge is
left over.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-06-14 13:40:50 +03:00
Michael Braun
bbe9eddce0 tests: Change vlan_id back and forth
Enhance test ap_vlan_wpa2_radius_id_change to change the VLAN-ID
back as a last step. This ensures that the wpa_group for VLAN-ID 1
did not enter FATAL_FAILURE state during the test.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-04-26 16:56:22 +03:00
Jouni Malinen
f80fd58de6 tests: Check vlan_id information in STA output
In addition, this adds some delay between the authentication and data
connectivity test through the newly added VLAN and by doing so, makes
ap_vlan_wpa2_radius_id_change a bit more robust. It was possible for the
EAPOL-Key message 4/4 not having yet been processed by hostapd at the
time the data test started.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 15:59:19 +03:00
Jouni Malinen
8aba435b16 tests: Make ap_vlan_wpa2_radius_id_change more robust
Wait for the 4-way handshake completion instead of assuming it gets done
in 0.1 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 17:51:18 +02:00
Jouni Malinen
9416e47f47 tests: Fix ap_vlan_wpa2_radius_id_change exception
This was supposed to be Exception("string") not "string".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-03 15:40:19 +02:00
Jouni Malinen
3a4bace428 tests: RADIUS server changing VLAN ID assignment
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 01:11:56 +02:00
Jouni Malinen
1131a1c8d2 tests: Replace last remaining hwsim_test uses with DATA_TEST
External tool is not needed anymore to run the data connectivity tests
since hostapd test mode now allows the possible bridge or VLAN interface
to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:09:07 +02:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Jouni Malinen
fd6b727ed4 tests: VLAN using vlan_file mapping
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 17:06:34 +03:00
Jouni Malinen
018ead4218 tests: VLAN with tagged interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-15 19:04:31 +02:00
Jouni Malinen
fac1722787 tests: VLAN tests using RADIUS tunnel attributes
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00
Jouni Malinen
37fa2eb5ea tests: Add test cases for AP VLAN
These verify dynamic AP VLAN interface addition with open and WPA2-PSK
network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00