Commit graph

94 commits

Author SHA1 Message Date
Jouni Malinen
7bfc47c34f Add driver ops for allocating interface addresses
This adds placeholder code for allowing the virtual interfaces to be
pre-allocated a MAC address before the interface type is known with
drivers that do not handle interface type changes.
2010-01-03 13:42:06 +02:00
Jouni Malinen
504e905c6e Add a driver op for enabling Probe Request reporting in station mode 2010-01-03 13:30:22 +02:00
Jouni Malinen
9646a8ab8b Remove unnecessary wpa_event_type typedef 2010-01-03 13:10:12 +02:00
Jouni Malinen
2a8b74163e Move struct hostapd_frame_info definition away from driver API
This is internal data structure for hostapd/AP functionality and does
not need to be defined in driver.h.
2010-01-03 12:37:02 +02:00
Jouni Malinen
0d9fc3d8bd Remove struct ieee80211_hdr dependency from EVENT_RX_FROM_UNKNOWN
It is simpler to just pass in u8* to the beginning of the header.
2010-01-03 12:17:20 +02:00
Jouni Malinen
a0e0d3bb15 Replace hostapd_probe_req_rx() with EVENT_RX_PROBE_REQ driver event 2010-01-03 12:11:44 +02:00
Jouni Malinen
245519e0cd Replace wpa_supplicant_sta_rx() call with driver event
Get rid of wpa_supplicant_sta_rx() and add a new driver event that is
marked to be used only with driver_test.c. In addition, remove this
functionality from privsep wrapper. This is only use for client mode
MLME testing with driver_test.c.
2010-01-03 11:50:26 +02:00
Jouni Malinen
8d923a4acf Only expire scanned BSSes based on new scan results
Get more information about scans when updating BSS table information.
This allows the missing-from-scans expiration rule to work properly
when only partial set of channels or SSIDs are being scanned.
2010-01-02 13:57:44 +02:00
Jouni Malinen
4832ecd754 Add an option for driver wrappers to report operational frequency 2009-12-28 13:23:13 +02:00
Jouni Malinen
cd7d80f373 Allow Probe Request callbacks to terminate iteration 2009-12-28 13:14:58 +02:00
Jouni Malinen
60ad2c7bef Fix a typo in a doxygen comment 2009-12-27 17:13:15 +02:00
Jouni Malinen
719347511a Get rid of unnecessary typedefs for enums. 2009-12-26 10:35:08 +02:00
Jouni Malinen
a2de634d1c Removed hostapd_new_assoc_sta() from driver wrapper API
This is not called directly by any of the driver wrappers anymore, so
the function can be removed from driver.h and drv_callbacks.c.
2009-12-24 23:30:32 +02:00
Jouni Malinen
14f7938660 Merge driver ops set_wps_beacon_ie and set_wps_probe_resp_ie
set_ap_wps_ie() is not used to set WPS IE for both Beacon and Probe
Response frames with a single call. In addition, struct wpabuf is used
instead of separate u8* and length fields. This avoids duplicated
allocation of the IEs and simplifies code in general.
2009-12-24 19:46:06 +02:00
Felix Fietkau
fbbfcbac29 hostapd: Add WDS (4-address frame) mode with per-station interfaces
This mode allows associated stations to use 4-address frames to allow
layer 2 bridging to be used. At least for the time being, this is only
supported with driver=nl80211.
2009-12-24 11:46:22 +02:00
Jouni Malinen
b57e086cc1 Mark management frame processing functions to use const buffer 2009-12-13 23:25:30 +02:00
Jouni Malinen
f8b1f69561 Use generic driver events for TX status and RX reporting
Replace driver wrapper calls to hostapd_tx_status(),
hostapd_rx_from_unknown_sta(), hostapd_mgmt_rx(), and
hostapd_mgmt_tx_cb() with new generic driver events
EVENT_TX_STATUS, EVENT_RX_FROM_UNKNOWN, and EVENT_RX_MGMT.

This cleans up lot of the driver wrapper code to be less dependent
on whether it is being used within wpa_supplicant AP mode or hostapd.
2009-12-13 23:05:39 +02:00
Jouni Malinen
fcf0f87d97 Replace hostapd_button_pushed() with generic driver event 2009-12-13 21:21:10 +02:00
Jouni Malinen
1cd973d501 Replace hostapd_michael_mic_failure() with generic driver event 2009-12-13 21:17:11 +02:00
Jouni Malinen
8043e72589 Add BSS ctx to if_add() driver op
This remove the need from driver_test.c to go through internal hostapd
structures to find the appropriate BSS when reporting events on secondary
BSSes.
2009-12-13 18:54:11 +02:00
Jouni Malinen
0de39516ae Map STA flags into values defined in driver.h
This removes need for including hostapd/sta_flags.h into driver
wrappers and removes any remaining dependencies between driver flags
and internal hostapd flags.
2009-12-13 11:35:39 +02:00
Jouni Malinen
60c8cfb4fb Remove usused flags parameter from sta_add() driver op 2009-12-13 11:05:22 +02:00
Jouni Malinen
af586419fd Add more WPA/IEEE 802.1X parameters into set_ieee8021x() driver op
This gets rid of the need to touch internal hostapd data structures
directly from the driver wrappers.
2009-12-12 23:50:29 +02:00
Jouni Malinen
e3bd3912ca Change set_ieee8021x driver op to use parameters structure
This makes it easier to extent the set of parameters passed to
this driver wrapper function.
2009-12-12 23:32:44 +02:00
Jouni Malinen
08fd8c15a0 Replace direct driver call to wpa_ft_rrb_rx() with driver event
This avoids need to include hostapd/wpa.h into the driver wrappers.
2009-12-12 22:43:26 +02:00
Jouni Malinen
0531006644 driver_wired: Move STA entry processing away from driver wrapper
Get rid of hostapd/sta_info.h dependency by introducing a new driver
callback function for hostapd.
2009-12-12 20:39:25 +02:00
Jouni Malinen
9008a3e44d Merge get_seqnum_igtk() driver op with get_seqnum()
IEEE 802.11w uses distinct key indexes (4 and 5) so the same
get_seqnum() handler can be used to fetch packet number for both
TKIP/CCMP and BIP(using IGTK).

Since the new get_seqnum_igtk() handler was not actually implemented by
any driver wrapper, this may also fix BIP/IGTK sequence number reporting
with driver_nl80211.c.
2009-12-11 00:15:54 +02:00
Jouni Malinen
90b8c4c5f8 Add Doxygen comments for rest of struct wpa_driver_ops members
All members have now at least minimal documentation.
2009-12-10 21:11:33 +02:00
Jouni Malinen
6fe8296197 Move vendor-specific IE type defines away from driver.h
These are generic IEEE 802.11 defines and do not really need to be in
the driver interface specific header file.
2009-12-10 12:27:46 +02:00
Jouni Malinen
15333707d5 Add more documentation for driver ops 2009-12-10 01:21:01 +02:00
Jouni Malinen
3484a18a13 hostapd: Remove unused bridge_packets configuration option
There was code for configuring this, but no driver wrapper actually
implements the actual setting. Remove this for now to reduce potential
confusion and to simply the driver interface.
2009-12-09 22:06:43 +02:00
Jouni Malinen
fb7842aa51 Remove struct hostapd_rate_data from driver API
In addition to the bitrate, the only other variable in this structure
is used internally in hostapd. Move this structure into hostapd.h and
make the driver API use simpler data structure (array of bitrates).
2009-12-09 21:57:50 +02:00
Jouni Malinen
217e7eeaf0 Remove unused rate flags from driver use
These are not really used and can be removed to clean up the driver
interface definition. The only remaining flag (HOSTAPD_RATE_BASIC) can
be removed once the basic rate set indication can be handled
differently.
2009-12-09 21:38:14 +02:00
Jouni Malinen
22a7c9d735 Merge bss_add/bss_remove drivers ops into if_add/if_remove
if_add/if_remove can now be used as the generic driver ops for adding
and removing virtual interfaces of various types. In addition,
driver_nl80211.c is now including this code unconditionally, so that
the functions are not limited only for hostapd.
2009-12-09 16:49:28 +02:00
Jouni Malinen
b5996353e7 Remove unused if_update() driver op 2009-12-09 15:47:20 +02:00
Jouni Malinen
644a8f2208 Remove unused phytype RX info variable 2009-12-06 18:54:58 +02:00
Jouni Malinen
e6b8efeba0 nl80211: Add debug prints for BSS status in scan results
Print what the kernel believes the current BSS status (authenticated
or associated) is in scan results. In addition, check whether this
matches with the state that wpa_supplicant believes the driver to be
in.

This does not change the actual behavior, but will provide information
that will help in debugging potential issues where cfg80211/mac80211
seems to get into a different state from wpa_supplicant. In addition,
this provides an easy location for a workaround that could be added to
clear cfg80211/mac80211 state for unknown BSSes.
2009-12-02 16:45:31 +02:00
Jouni Malinen
0c3abf8d22 Add driver wrapper callback for WPS push button pressed
This avoids the need to include ../hostapd/wps_hostapd.h into the
driver wrappers.
2009-11-29 18:18:02 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
fc4e2d9501 HT: Remove unneeded struct ht_cap_ie wrapper
It is simpler to just use the HT Capabilities IE payload structure
as-is.
2009-11-29 13:04:21 +02:00
Jouni Malinen
be8eb8ab3e Fix AP mode HT Capabilities IE to use A-MPDU Parameters from the driver
Instead of using hardcoded maximum A-MPDU length of 64 kB and no
restrictions on minimum MPDU Start Spacing, use the correct values
reported by the driver.
2009-11-29 12:21:26 +02:00
Jouni Malinen
ec8d20187d Remove obsoleted get_scan_results() driver_ops
This has now been replaced with get_scan_results2() in every
in-tree driver.
2009-11-23 21:33:37 +02:00
Jouni Malinen
c2e8d0a092 Remove deprecated scan and set_probe_req_ie driver_ops
These have been replaced with scan2 driver_ops that provides all
parameters in a single call.
2009-11-23 21:13:46 +02:00
Jouni Malinen
4a867032ae Remove deprecated driver_ops handlers
This gets rid of previously deprecated driver_ops handlers set_wpa,
set_drop_unencrypted, set_auth_alg, set_mode. The same functionality
can be achieved by using the init/deinit/associate handlers.
2009-11-23 20:22:38 +02:00
Jouni Malinen
642187d6bf Merge set_key and hapd_set_key driver_ops into a single function 2009-11-23 16:58:32 +02:00
Jouni Malinen
5d67487244 Merge set_beacon driver_ops into a single one
Clean up driver interface by merging hostapd and wpa_supplicant
specific set_beacon driver_ops into a single one. In addition,
merge set_beacon_int into to the same operation.
2009-11-23 15:26:05 +02:00
Jouni Malinen
62fa124ce2 nl80211/SME: Use reassociation when roaming within the ESS 2009-11-17 19:25:05 +02:00
Jouni Malinen
08eb154db5 Fix MCS set field to be based on driver info
Instead of using hardcoded Rx MCS bitmask (indexes 0..15 enabled),
use the real information from the driver capabilities.
2009-11-05 12:38:47 +02:00
Jouni Malinen
b3ad11bb80 nl80211: Add parsing of NL80211_BSS_SEEN_MS_AGO into scan results 2009-10-01 17:53:22 +03:00
Johannes Berg
0194fedb46 driver_nl80211: Fix MLME key settings for static WEP
Current wpa_supplicant has a bug with WEP keys, it adds a zero-length
sequence counter field to netlink which the kernel doesn't accept.

Additionally, the kernel API slightly changed to accept keys only when
connected, so we need to send it the keys after that. For that to work
with shared key authentication, we also include the default WEP TX key
in the authentication command.

To upload the keys properly _after_ associating, add a new flag
WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE indicating that the driver
needs the keys at that point and not earlier.
2009-09-15 10:48:30 +03:00