Commit graph

67 commits

Author SHA1 Message Date
Jouni Malinen
62e0e57a98 tests: Make go_search_non_social more robust
Try the initial scan on the operating channel twice before claiming a
test failure. It is possible for an active scan to fail to see the GO
especially if running the test under heavy load.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 11:08:24 +02:00
Jouni Malinen
5e8f231947 tests: P2P autonomous GO switching channels (separate group interface)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-05 16:11:31 +02:00
Avraham Stern
4041d2af4d tests: Use group control interface for GO commands in autogo_chan_switch
The channel switch command is intended for the GO interface, but
it was not sent on the group control interface. For configurations
that use a separate interface for P2P groups, this will fail the test.

Fix this by sending the channel switch command on the group control
interface and waiting for the channel switch event on the group
control interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-01-05 16:07:29 +02:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
bb04a9a9a3 tests: Use general cmd_execute() for bridge setup commands
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing shell commands to setup bridge so that this would also work on
remote setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
8efc83d4e7 tests: Add support for wlantest for remote hwsim tests
Use a monitor interface given in the command line that is not also a
station or an AP as a monitor running wlantest on the channel used by
the test. This makes all the tests that use wlantest available for
execution on real hardware on remote hosts.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:09 +03:00
Ilan Peer
9c01d6a965 tests: Use global control interface to set p2p_no_group_iface
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 23:47:29 +03:00
Avraham Stern
a7efe6c386 tests: Modify autogo_scan to support P2P Device interface
Support configurations that use a dedicated P2P Device interface by
sending the P2P_CONNECT command on the global control interface.

In addition, when a dedicated P2P Device interface is used, there is no
need to manually respond to the Provision Discovery Request since the
request is processed by the P2P Device interface and this interface was
not set for external RX management frames handling.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:11:13 +03:00
Jouni Malinen
be4a0d0d5a tests: Make autogo_join_auto_go_neg more robust
It was possible for this test case to fail if the single attempt of
discovering the peer as part of the scan for join failed. This test case
was useful in combination with another test case:
ap_hs20_fetch_osu autogo_join_auto_go_neg

However, there is now an explicit test case (discovery_after_gas) for
this, so autogo_join_auto_go_neg can be made more robust without losing
testing coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
05032725e1 tests: P2P client joining a group before having found GO Device Address
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 15:17:36 +02:00
Jouni Malinen
9464e0996e tests: P2P autonomous GO and no P2P IE in Probe Response scan results
autogo_scan verifies the special case where a Probe Response frame
without P2P IE has been received from a GO (e.g., due to a non-P2P
interface requesting a scan) and P2P information from a Beacon frame
needs to be used instead to determine that the group is persistent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
4b9d79b66e tests: Make it less likely to overflow wlan5 control iface socket
Number of test cases did not read all control interface socket events
from the dynamically added wlan5 interface. This could result in hitting
maximum socket TX queue length and failures in the following test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 01:42:42 +03:00
Ilan Peer
5590d2ecd1 tests: Fix autogo_pbc() waiting for WPS-PBC
Wait on the global control interface to support
configurations that use a dedicated P2P Device interface.

Note that the group interface cannot be used, as the group
interface name is not saved since no group was created.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:59:01 +03:00
Ilan Peer
c0b57b241a tests: Use global and group control interface in test_p2p_autogo
This is required when a dedicated P2P Device is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:46:17 +03:00
Jouni Malinen
cfbdb9958f tests: Increase wait timeout in autogo_m2d
The time before trying to associate with an AP that does not advertise
Selected Registrar TRUE is going to be incremented, so increase the
autogo_m2d timeout to avoid reporting incorrect errors due to missing
M2D events.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 17:55:32 +03:00
Jouni Malinen
eb9c155498 tests: P2P autonomous GO and many clients (P2P IE fragmentation)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:58:17 +02:00
Jouni Malinen
bfc048b48f tests: P2P autonomous GO with large number of GO instances
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:53 +02:00
Jouni Malinen
6d0b447464 tests: P2P_FIND with freq parameter to scan a single channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 22:06:24 +02:00
Jouni Malinen
380f3a8ba1 tests: Make autogo_join_auto_go_neg more robust
This test cases used to fail if dev1 had seen dev0 as a GO in an earlier
test case, e.g., when running it after autogo_fail. Fix this by clearing
scan results on dev1 at the beginning of the test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 12:09:07 +02:00
Jouni Malinen
9177b0a8c9 tests: Successful P2P_CONNECT-auto cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:59:57 +02:00
Jouni Malinen
d2b84e430c tests: P2P_CONNECT-auto not finding GO
This is a regression test for an earlier bug that resulted in using
freed memory after a P2P group interface was removed as part of
fallback-to-GO-Negotiation in P2P_CONNECT-auto.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:35:49 +02:00
David Spinadel
bbcbbd3701 tests: Modify autogo_bridge test to use group interface
1. Add get_group_ifname() to wpasupplicant.py
2. Use the function to get the interface name for the bridge.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
d4f2ba749e tests: Use group control interface in autogo
P2P-PRESENCE-RESPONSE is a group event, and thus need
to use the group control interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
36f2818784 tests: Use get_bss() with ifname in autogo
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
acd620258d tests: Modify autogo_legacy to use the group interface
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
777bbe7a3c tests: P2P_PRESENCE_REQ on group interface
This ends up using the special offchannel.c code path where a different
interface is selected for TX. In addition, the P2P-PRESENCE-RESPONSE
event is verified to be delivered on the group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
c93b6706d2 tests: Additional P2P_REMOVE_CLIENT coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
bf1b59731a tests: Additional P2P_PRESENCE_REQ coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
dd15d44884 tests: P2P_GET_PASSPHRASE in P2P Client mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 21:15:26 +02:00
Jouni Malinen
ca9b78add8 tests: Additional coverage for P2P_PROV_DISC
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 21:13:17 +02:00
Jouni Malinen
934d5b0403 tests: P2P_GET_PASSPHRASE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
d463c5566f tests: Additional coverage for SCAN_RESULTS and BSS entry flags
This increases wpa_supplicant_ie_txt(), print_bss_info(), and
wpa_supplicant_ctrl_iface_scan_result() testing coverage to include the
previously missing key management options.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
ee3f9f3837 tests: Optimize autogo test cases by removing unnecessary scans
Keep full channel scans in autogo for test coverage, but use single
channel scan in all other autogo* test cases to remove unnecessary
waiting that does not add any test coverage. This removes more than one
minute from the total test execution time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
377babb205 tests: Fix autogo_bridge to clear autoscan setting
Previously, periodic autoscan could have been left running and that
could result in the following test cases failing in some cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
d885a0ba7c tests: P2P GO netdev in a bridge
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:27:27 +03:00
Jouni Malinen
4b15c3f256 tests: P2P GO channel preference and regulatory rule mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 17:57:26 +03:00
Jouni Malinen
31424fa732 tests: P2P passphrase length configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-22 00:17:18 +03:00
Jouni Malinen
4221679233 tests: Verify P2P GO start when scan_req = MANUAL_SCAN_REQ
There was a bug in this code path that resulted in the
skip-scan-to-start-GO case to not actually skip the scan. It looks like
this could be hit at least when autoscan was enabled, but it is possible
that some other sequences could hit this as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
75ee44f2e6 tests: P2P group interface ifdown
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
8c7559ee8f tests: P2P GO issuing multiple credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 11:46:26 +03:00
Jouni Malinen
f44c45ac7f tests: Verify STATUS-WPS passphrase on GO
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
ab18b03bb7 tests: GO selecting specific peer to join using PBC
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
0afb797e9b tests: WPS-M2D or WPS-FAIL while trying to join a group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 12:58:35 +03:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
ad36d27d6a tests: Remove ignore_old_scan_res workaround
Now that wpa_supplicant requests the driver (cfg80211) to clear its scan
cache automatically after each BSS_FLUSH/FLUSH command, the previously
used ignore_old_scan_res workaround should not be needed for the hwsim
test cases anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:59:59 +02:00