Commit graph

3588 commits

Author SHA1 Message Date
Jouni Malinen
f758ae7665 P2P SD: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:34:59 +02:00
Jouni Malinen
619fdfacc4 HS 2.0: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:34:59 +02:00
Jouni Malinen
904e977bc7 Avoid undefined behavior in pointer arithmetic in scan result IE parsing
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:34:59 +02:00
Jouni Malinen
bdce45b83e WNM: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:34:59 +02:00
Jouni Malinen
1f32a23962 Avoid undefined behavior in pointer arithmetic in BSS IE parsing
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
67fea55ca2 Interworking: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
ca33a5e895 Add "git describe" based version string postfix
If hostapd or wpa_supplicant is built from a git repository, add a
VERSION_STR postfix from the current git branch state. This is from "git
describe --dirty=+". VERSION_STR will thus look something like
"2.6-devel-hostap_2_5-132-g4363c0d+" for development builds from a
modified repository.

This behavior is enabled automatically if a build within git repository
is detected (based on ../.git existing). This can be disabled with
CONFIG_NO_GITVER=y in wpa_supplicant/.config and hostapd/.config.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-16 22:20:55 +03:00
Jouni Malinen
4363c0d6f5 eapol_test: Add -v for displaying version information
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-16 22:00:11 +03:00
Avraham Stern
932267ad67 P2P: Add P2P_ASSOC_RESP to P2P vendor elements
Vendor specific IEs added to frame type P2P_ASSOC_RESP are saved in
the interface context, but as they are added as part of the P2P IEs,
they need to be saved in the global P2P context.

Fix this by directing vendor specific IEs added to P2P_ASSOC_RESP
frame type to the P2P context.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:47:41 +03:00
Jouni Malinen
e699a7a9b3 P2P: Add more debug prints for Action frame TX clearing steps
This makes it easier to analyze debug logs for issues related to
multiple pending Action TX frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:20:22 +03:00
Avraham Stern
1a21fd37f9 Do not expire scan results based on aborted scan
Do not expire scan results entries based on scan results from a scan
that was aborted. The aborted scan did not scan all the requested
channels or SSIDs, so the fact that a BSS is missing from the scan
results does not mean it is not available.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-14 21:12:28 +03:00
Avraham Stern
0aed3f5a80 P2P: Set CTWindow only for P2P GO
CTWindow was set for all AP interfaces if the driver supports it and
this parameter is set in wpa_supplicant configuration. This results in
failing to start an AP that is not a P2P GO as this setting is rejected
by the driver.

Fix that by setting the CTWindow only for P2P GO interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-14 21:09:41 +03:00
Ningyuan Wang
c143c3b72a D-Bus: Add a dbus handler for expected disconnection
Add a global D-Bus handler ExpectDisconnect for setting
wpa_s->own_disconnect_req flag. This flag will prevent wpa_supplicant
from adding blacklists and requesting incomplete scan upon the incoming
disconnection. This is mainly meant for a case where suspend/resume is
used and some external component knows about that and can provide the
information to wpa_supplicant before the disconnection happens.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2015-10-12 18:03:11 +03:00
Jouni Malinen
a8412ec9d0 Clear own_disconnect_req on new connection attempt
It was possible for wpa_s->own_disconnect_req to be left set to 1 from a
disconnection attempt from a prior connection. This could then prevent
proper connection failure processing with the new connection in
wpas_connection_failed(). This was triggered by the following hwsim test
case sequence: wpas_mesh_secure sae_no_ffc_by_default. In this sequence,
the SAE failure due to unsupported group did not result in proper
wpas_connection_failed() processing and retry.

Fix this by clearing wpa_s->own_disconnect_req in
wpa_supplicant_associate() before starting a new connection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-12 14:24:06 +03:00
Max Stepanov
cd571e14dd P2PS: Fix persistent group reporting in wpas_p2ps_prov_complete()
When one peer doesn't include a persistent group info in PD Request
the other peer shouldn't report a persistent group usage with this
peer even if such a persistent group exists locally. This condition
could be violated in the previous implementation.

In case a local persistent group exists and the
wpas_p2ps_prov_complete() function is called with persist_ssid parameter
set to NULL, wpa_supplicant reported P2PS-PROV-DONE with persist=<idx>
instead of conncap=<role> parameter.

This happened because the wpas_p2p_get_persistent() function was called
without verification whether the persist_ssid was set to NULL. In this
case the wpas_p2p_get_persistent() returns the first existing persistent
group matching the P2P Device Address without verifying the group's
SSID. After that the group ID is used as persist=<idx> parameter of
P2PS-PROV-DONE event.

Fix the issue by adding persist_ssid and persist_ssid_size verification
as a condition for the wpas_p2p_get_persistent() call.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-10-11 21:42:03 +03:00
Ilan Peer
8bb8e6edb8 P2PS: Indicate the chosen operating frequency
On successful P2P PD, report the chosen frequency in case the local
device is going to be the P2P GO, so in can later be used to instantiate
the new P2P GO, etc.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Ilan Peer
ebd32943cb P2PS: Add channel policy to PD Request
Add operating channel selection and channel list processing similar to
that done when building GO Negotiation Request, i.e., consider the
currently used channels, configured channels, etc.

P2PS introduces a flow where a responder needs to provide channel data
without being previously aware of the current constraints, i.e., the
channels currently in use by other interfaces. To handle this, extend
the get_group_capability() callback to also handle channel selection
aspects of group capabilities.

In case there is an active P2P GO that is going to be used for the P2PS
PD, force its current operating frequency in the PD attributes.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Ilan Peer
f8a80e39b3 P2PS: Change connection capability handling
Change the connection capability handling so that in case there are no
active roles, the peer has an active GO, and the advertisement supports
operation as a client, the returned connection capability is set to
client.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-07 17:07:21 +03:00
Ilan Peer
ab804bcb6f P2PS: Re-factor p2ps_group_capability()
The code was iterating all the interfaces, and for each interface
iterated all the network blocks to count active P2P GO and P2P Client
interfaces.

Change the code to reuse wpas_p2p_get_go_group() to get a P2P GO
interface and add wpas_p2p_get_cli_group() and use it to find a
P2P Client interface, and use these objects when evaluating the
group capability.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-07 17:07:21 +03:00
Ilan Peer
8d5e73290f P2PS: Re-factor wpas_p2p_get_go_group() and wpas_p2p_group_go_ssid()
Re-factor wpas_p2p_get_go_group() to:

1. Skip the dedicated P2P Device management interface if it is used.
2. Instead of iterating all the interface configured networks,
   only access the current_ssid pointer to check if the current
   interface is acting as a persistent P2P GO.

To avoid code duplication, also re-factor wpas_p2p_group_go_ssid()
to call wpas_p2p_get_go_group().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
876e74aa5f Interworking: Fix wpa_supplicant build without CONFIG_HS20=y
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
8c4a1026b8 Interworking: Support unknown ANQP-elements in BSS table
This allows wpa_supplicant to expose internally unknown ANQP-elements in
the BSS command. For example, "ANQP_GET <BSSID> 265" can be used to
fetch the AP Geospatial Location ANQP-element and if the AP has this
information, the "BSS <BSSID>" command will include the response as
"anqp[265]=<hexdump>".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Adam Langley
aeeb0bca71 Android: Fix keystore-backed keys with BoringSSL
The switch to BoringSSL broke keystore-backed keys because
wpa_supplicant was using the dynamic ENGINE loading to load
the keystore module.
The ENGINE-like functionality in BoringSSL is much simpler
and this change should enable it.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2015-10-06 23:10:17 +03:00
Bob Copeland
681753f23c mesh: Generate proper AID for peer
IEEE Std 802.11-2012 13.3.1 states that the AID should be generated on
the local node for each peer. Previously, we were using the peer link ID
(generated by the peer) which may not be unique among all peers. Correct
this by reusing the AP AID generation code.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2015-10-06 01:27:29 +03:00
Jouni Malinen
12ea4cff6b Add forgotten list entry removal for control interface deinit
dl_list_del() must be called before freeing the list entries. Neither of
these cases caused problems because the full list data structure was
freed, but still, it is better to do this properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
3fdaaa8fc4 Throttle control interface event message bursts
Some operations like a new scan result processing can result in large
number of wpa_supplicant control interface messages being generated.
Especially with multiple control interface monitors, this could result
in hitting the output queue length maximum and event messages getting
dropped. In worst case, that could even result in hitting ten
consecutive sendto() errors which could result in an attached monitor
socket getting detached.

Avoid this type of issues by throttling monitor event transmission based
on the output queue length. If more than half of the maximum send buffer
is used, postpone sending of following event messages until the pending
output queue has dropped below the limit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:15 +03:00
Jouni Malinen
a530fe778b Add wpa_supplicant EVENT_TEST control interface command
This testing command makes it easier to debug bursts of event message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 11:45:13 +03:00
Luciano Coelho
7d82170aba Set channel and operating class in hostapd_fill_csa_settings()
The CSA channel and operating class values need to be set for all types
of channel switch (i.e., either if it's triggered by the control
interfaces or due to the GO-follows-STA flow). To do so, move the code
that sets them from the GO-follows-STA flow to the more generic
hostapd_fill_csa_settings() function.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-10-03 21:26:23 +03:00
Andrei Otcheretianski
2d3943ce5b nl80211: Specify CSA offsets in send_mlme() driver op
Some management frames contain CSA counters which should be updated by
kernel. Change driver op send_mlme() allowing to send a frame,
specifying an array of offsets to the CSA counters which should be
updated. For example, CSA offsets parameters should be specified when
sending Probe Response frames during CSA period.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 21:07:35 +03:00
Ilan Peer
61f121d925 Handle channel switch notification for other interface types
Channel switch notification was handled only for AP/GO interfaces. As
the notification can be sent on other interface types as well, extend
the handling to handle other interface types.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-03 21:01:49 +03:00
Andrei Otcheretianski
98b0508121 P2P: Implement P2P_GO_FREQ_MOVE_SCM_ECSA policy
Add new GO frequency move policy. The P2P_GO_FREQ_MOVE_SCM_ECSA prefers
SCM if all the clients advertise eCSA support and the candidate
frequency is one of the group common frequencies.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 20:30:40 +03:00
Andrei Otcheretianski
3bafb0d842 P2P: Trigger channel selection correctly during CSA
Do not consider moving GOs to a new channel if one of them is in the
middle of CSA. In addition, call wpas_p2p_update_channel_list() after
EVENT_CH_SWITCH is handled.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 20:22:09 +03:00
Ilan Peer
23dcb302eb P2P: Relax wpas_p2p_init_go_params() for P2P GO CSA
wpas_p2p_move_go_csa() uses wpas_p2p_init_p2p_params() to select the
frequency to move to. However, it is possible that all the channels are
already used, so the selection of a new frequency would fail, although
the frequency used by the P2P GO should not be considered as used if it
is the only one using it.

To overcome this, allow the frequency selection to continue even if all
the frequencies are in use, but the frequency used by the P2P GO is not
used by any station interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-03 20:16:51 +03:00
Andrei Otcheretianski
73afc20d40 P2P: Implement wpas_p2p_move_go_csa()
Use channel switch mechanism to move a P2P GO to a new channel,
when required. In order to be able to reconfigure the GO channel,
split wpa_supplicant_conf_ap() function, so the frequency
configuration part can be reused to find additional CSA settings.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 20:10:37 +03:00
David du Colombier
33bce0e732 wpa_cli: Fix static linking with readline
The readline library depends on ncurses, so it should be set before
ncurses on the linker command line to be able to be statically linked
successfully.

Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2015-10-01 20:49:54 +03:00
Jouni Malinen
b658547dd5 nl80211: Add build option for QCA vendor extensions
This allows the binary sizes to be reduced if no support for nl80211
vendor extensions are needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 12:45:27 +03:00
Kanchanapally, Vidyullatha
e903d32d41 Parallelize distinct radio work operations
This commit contains the necessary changes to parallelize
distinct radio work operations which are different in type and
the band used, only when the underlying driver is capable of
supporting such simultaneous offchannel operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
adcd7c4b0b nl80211: Support vendor scan together with normal scan
Allow wpa_supplicant to use vendor scan (if supported by the driver)
together with the normal nl80211 scan and handling external scan events.
Since this results in possibility of concurrent scan operations, some of
the operations related to scan results need to check more carefully when
an event is relevant for a specific interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Jouni Malinen
49c36b708e Add ChangeLog entries for v2.5
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-27 22:02:05 +03:00
Maneesh Jain
be5ab8d4ab D-Bus: Add InvitationReceived Signal
This is equivalent to the P2P_EVENT_INVITATION_RECEIVED signal on the
control interface. It can be used to sent the Invitation Received signal
to applications written using D-Bus.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-09-27 15:55:11 +03:00
Saurav Babu
0a7b2a02eb D-Bus: Add Signal to notify WPS PBC Overlap event
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2015-09-27 12:52:34 +03:00
Saurav Babu
893e2cf961 D-Bus: Add signal to notify WPS timeout event
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2015-09-27 12:47:47 +03:00
Andrei Otcheretianski
55b4cc6dd7 wpa_supplicant: Fix channel switch notification with VHT
Fix a bug in wpas_ap_ch_switch() function, which didn't pass VHT
frequencies correctly to hostapd_event_ch_switch().

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-09-25 21:09:58 +03:00
Andrei Otcheretianski
d7ded54774 Update wpa_s->current_ssid->frequency on CS event
Update wpa_s->current_ssid->frequency when EVENT_CH_SWITCH is received.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-09-25 21:07:01 +03:00
Andrei Otcheretianski
22264b3c61 Fix get_shared_radio_freqs_data() used-by flags setting
Fix an iteration bug in get_shared_radio_freqs_data when building
freqs_data array. Only the last used-by flag was maintained instead of
making this a bitfield of all found uses.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-09-25 21:02:55 +03:00
Masashi Honma
241c33335b mesh: Add support for scanning only the current frequency
This patch enables scan_cur_freq=1 on VIF based mesh network.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-09-25 20:59:32 +03:00
Nishant Chaprana
fd7d3c495e D-BUS: dev_passwd_id should be "q" because it uses DBUS_TYPE_UINT16
This corrects the type of dev_passwd_id in GONegotiationRequest event.
This field is packed as DBUS_TYPE_UINT16 but in
wpas_dbus_interface_signals it was "i" which is DBUS_TYPE_INT32.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-09-25 20:54:11 +03:00
Jouni Malinen
de78844b33 Fix EAP-EKE peer build rules
NEED_AES_CBC is needed for EAP-EKE builds.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-25 19:43:44 +03:00
Alan T. DeKok
939471b9eb Linker changes for building eapol_test on OS X
Signed-off-by: Alan DeKok <aland@freeradius.org>
2015-09-25 19:32:14 +03:00
Sunil Dutt
c9cfa6a9af Android: Avoid same per-iface and global ctrl socket
Android platform assigns the same socket id if the socket identifier in
conf->ctrl_interface and global->params.ctrl_interface (parameter for
android_get_control_socket) point to the same Android specific control
socket. This ends up having two eloop socket handlers registered for the
same file descriptor and thus, two attempt to receive and process each
command. This can result in unexpected failure, e.g., the prefix IFNAME=
for any command is valid for global socket handler, but results in
UNKNOWN COMMAND response from the per-interface ctrl socket handler).

Since it might be possible to end up with this type of invalid
configuration in OTA upgrade, compare the socket identifiers and do not
open the ctrl socket on the respective interface if both point to same.
This allows the Wi-Fi framework to use the global control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-24 13:10:10 +03:00