Commit graph

15576 commits

Author SHA1 Message Date
Daniel Golle
fa308a6496 hostapd: Fix a typo in sample configuration
'assocition' -> 'association'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-20 19:09:52 +02:00
Jouni Malinen
961eb08723 tests: Flush scan results in more Hotspot 2.0 test cases
This makes testing of INTERWORKING_CONNECT more robust.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 22:55:44 +02:00
Jouni Malinen
447ce4813a tests: Opportunistic Wireless Encryption transition mode disabled on STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 20:37:41 +02:00
Hai Shalom
d20365db17 EAP-SIM/AKA peer: Add support for EAP Method prefix
Add support for EAP method prefix in the anonymous identity
used during EAP-SIM/AKA/AKA' authentication when encrypted IMSI
is used. The prefix is a single character that indicates which
EAP method is required by the client.

Signed-off-by: Hai Shalom <haishalom@google.com>
2020-01-10 19:16:13 +02:00
Jouni Malinen
991e6b9e79 tests: Call stop_sigma_dut() in more failure cases
Some of the sigma_dut test cases were not yet using try/finally to
ensure stop_sigma_dut() gets called. That could result in not logging
all failure reasons in the log and getting stuck with being unable to
start new sigma_dut processes after failed test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:44:07 +02:00
Jouni Malinen
f0b6b23fe3 tests: Enable sigma_dut debug log for all test cases
There is no point in having to enable this separately for each test case
since the debug details are always useful if something fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:21:15 +02:00
Jouni Malinen
a04c153b9f tests: Verify that sigma_dut is functional after startup
There is no point in continuing the test ase if sigma_dut is not in
functional state.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:04:43 +02:00
Jouni Malinen
fb0f13fbf8 tests: Log sigma_dut stdout/stderr separately for each command
This makes logs easier to understand and this may also help in running
over buffer space and getting stuck with sigma_dut termination.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 23:31:29 +02:00
Vamsi Krishna
4bf78a79d0 ACS: Populate channel config from external ACS per documented behavior
Based on the now documented seg0/seg1 values from offloaded ACS, there
is a mismatch between the driver interface and internal hostapd use.

The value of segment0 field in ACS results is the index of the channel
center frequency for 20 MHz, 40 MHz, and 80M Hz channels. The value is
the center frequency index of the primary 80 MHz segment for 160 MHz and
80+80 MHz channels.

The value of segment1 field in ACS results is zero for 20 MHz, 40 MHz,
and 80 MHz channels. The value is the index of the channel center
frequency for 160 MHz channels and the center frequency index of the
secondary 80 MHz segment for 80+80 MHz channels.

However, in struct hostapd_config, for 160 MHz channels, the value of
the segment0 field is the index of the channel center frequency of 160
MHz channel and the value of the segment1 field is zero. Map the values
from ACS event into hostapd_config fields accordingly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 20:22:12 +02:00
Vamsi Krishna
fe1552d93c ACS: Update documentation of external ACS results event parameters
Update the documentation with values to be sent for seg0 and seg1 fields
in external ACS result event for 20 MHz, 40 MHz, 80 MHz, 160 MHz, and
80+80 MHz channels. These values match the changes done to definitions
of seg0 and seg1 fields in the IEEE 802.11 standard.

This vendor command had not previously been documented in this level of
detail and had not actually been used for the only case that could have
two different interpretation (160 MHz) based on which version of IEEE
802.11 standard is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 20:12:14 +02:00
Vamsi Krishna
881177201a 6 GHz: Fix Channel Width value for 80+80 in 6 GHZ Operation Info field
The Channel Width field value is 0 for 20 MHz, 1 for 40 MHz, 2 for 80
MHz, and 3 for both 160 MHz and 80+80 MHz channels. The 80+80 MHz case
was not addressed previously correctly since it cannot be derived from
seg0 only.

The Channel Center Frequency Segment 0 field value is the index of
channel center frequency for 20 MHz, 40 MHz, and 80 MHz channels. The
value is the center frequency index of the primary 80 MHz segment for
160 MHz and 80+80 MHz channels.

The Channel Center Frequency Segment 1 field value is zero for 20 MHz,
40 MHz, and 80 MHz channels. The value is the index of the channel
center frequency for 160 MHz channel and the center frequency index of
the secondary 80 MHz segment for 80+80 MHz channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 17:43:28 +02:00
Jouni Malinen
b4fe37c4fa Silence compiler warning in no-NEED_AP_MLME builds
Make the dummy hostapd_hw_mode_txt() wrapper return "UNKNOWN" instead of
NULL to avoid a warning from a debug printf using %s with NULL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 12:44:08 +02:00
Jouni Malinen
dd530b8739 Silence compiler warning with CONFIG_NO_ROAMING=y
Comment out unused static functions if CONFIG_NO_ROAMING is defined.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 12:40:17 +02:00
Alexander Wetzel
e1650a7b0e tests: Set key_flag when using SET_KEY
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Alexander Wetzel
a919a26035 Introduce and add key_flag
Add the new set_key() parameter "key_flag" to provide more specific
description of what type of a key is being configured. This is needed to
be able to add support for "Extended Key ID for Individually Addressed
Frames" from IEEE Std 802.11-2016. In addition, this may be used to
replace the set_tx boolean eventually once all the driver wrappers have
moved to using the new key_flag.

The following flag are defined:

  KEY_FLAG_MODIFY
    Set when an already installed key must be updated.
    So far the only use-case is changing RX/TX status of installed
    keys. Must not be set when deleting a key.

  KEY_FLAG_DEFAULT
    Set when the key is also a default key. Must not be set when
    deleting a key. (This is the replacement for set_tx.)

  KEY_FLAG_RX
    The key is valid for RX. Must not be set when deleting a key.

  KEY_FLAG_TX
    The key is valid for TX. Must not be set when deleting a key.

  KEY_FLAG_GROUP
    The key is a broadcast or group key.

  KEY_FLAG_PAIRWISE
    The key is a pairwise key.

  KEY_FLAG_PMK
    The key is a Pairwise Master Key (PMK).

Predefined and needed flag combinations so far are:

  KEY_FLAG_GROUP_RX_TX
    WEP key not used as default key (yet).

  KEY_FLAG_GROUP_RX_TX_DEFAULT
    Default WEP or WPA-NONE key.

  KEY_FLAG_GROUP_RX
    GTK key valid for RX only.

  KEY_FLAG_GROUP_TX_DEFAULT
    GTK key valid for TX only, immediately taking over TX.

  KEY_FLAG_PAIRWISE_RX_TX
    Pairwise key immediately becoming the active pairwise key.

  KEY_FLAG_PAIRWISE_RX
    Pairwise key not yet valid for TX. (Only usable with Extended Key ID
    support.)

  KEY_FLAG_PAIRWISE_RX_TX_MODIFY
    Enable TX for a pairwise key installed with KEY_FLAG_PAIRWISE_RX.

  KEY_FLAG_RX_TX
    Not a valid standalone key type and can only used in combination
    with other flags to mark a key for RX/TX.

This commit is not changing any functionality. It just adds the new
key_flag to all hostapd/wpa_supplicant set_key() functions without using
it, yet.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Markus Theil
7a42316374 tests: Fix Python sleep function
Current Python versions have no os.sleep(), use time.sleep() instead.

module 'os' has no attribute 'sleep'
Traceback (most recent call last):
  File "./run-tests.py", line 521, in main
    t(dev, apdev)
  File "/home/mtheil/hostap/tests/hwsim/test_pmksa_cache.py", line 356, in test_pmksa_cache_expiration
    hapd.wait_ptkinitdone(dev[0].own_addr())
  File "/home/mtheil/hostap/tests/hwsim/hostapd.py", line 282, in wait_ptkinitdone
    os.sleep(0.1)

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-09 11:55:53 +02:00
Jouni Malinen
3df4c05aec nl80211: Pass set_key() parameter struct to wpa_driver_nl80211_set_key()
This is the function that actually uses the parameters, so pass the full
parameter struct to it instead of hiding the struct from it in the
simple wrapper.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
99d8c4dca3 hostapd: Support VLAN offload to the driver
If the driver supports VLAN offload mechanism with a single netdev, use
that instead of separate per-VLAN netdevs.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
0f903f37dc nl80211: VLAN offload support
Add indication for driver VLAN offload capability and configuration of
the VLAN ID to the driver.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
4d3ae54fbd Add vlan_id to driver set_key() operation
This is in preparation for adding support to use a single WLAN netdev
with VLAN operations offloaded to the driver. No functional changes are
included in this commit.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Jouni Malinen
f822546451 driver: Move set_key() parameters into a struct
This makes it more convenient to add, remove, and modify the parameters
without always having to update every single driver_*.c implementation
of this callback function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 00:48:57 +02:00
Jouni Malinen
283be365c3 tests: SAE and AP sending Confirm message without waiting STA (2)
This goes through sae_confirm_immediate=2 behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 20:58:18 +02:00
Jouni Malinen
3912cbd88d SAE: A bit optimized sae_confirm_immediate=2 for testing purposes
sae_confirm_immediate=2 can now be used in CONFIG_TESTING_OPTIONS=y
builds to minimize the latency between SAE Commit and SAE Confirm by
postponing transmission of SAE Commit until the SAE Confirm frame is
generated. This does not have significant impact, but can get the frames
tiny bit closer to each other over the air to increase testing coverage.
The only difference between sae_confirm_immediate 1 and 2 is in the
former deriving KCK, PMK, PMKID, and CN between transmission of the
frames (i.e., a small number of hash operations).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 20:57:08 +02:00
Vamsi Krishna
33c8a10498 Do not select APs found on disabled channels for connection
If a channel list changed event is received after a scan and before
selecting a BSS for connection, a BSS found on a now disabled channel
may get selected for connection. The connect request issued with the BSS
found on a disabled channel is rejected by cfg80211. Filter out the BSSs
found on disabled channels and select from the other BSSs found on
enabled channels to avoid unnecessary connection attempts that are bound
to fail.

The channel list information will be updated by the driver in cases like
country code update, disabling/enabling specific bands, etc. which can
occur between the scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 16:19:47 +02:00
Vamsi Krishna
aa663baf45 Fix QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL NULL check
Correct the check for presence of
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL attribute before using it
while processing acs_result event.

Fixes: 857d94225a ("Extend offloaded ACS QCA vendor command to support VHT")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 16:14:24 +02:00
Markus Theil
2ffdf32eb8 tests: Add digestmod for Python 3.8
The digestmod argument also exists in earlier Python versions,
version 3.8 does not set a default argument anymore.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-08 14:57:13 +02:00
Markus Theil
f7b2fe99ea tests: Fix undefined behavior in module tests
Test: wpa_supplicant module tests
../src/utils/utils_module_tests.c:933:7: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-08 14:56:55 +02:00
Jouni Malinen
297d69161b OpenSSL: Fix memory leak in TOD policy validation
Returned policies from X509_get_ext_d2i() need to be freed.

Fixes: 21f1a1e66c ("Report TOD policy")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-07 20:40:12 +02:00
Markus Theil
8296ee1805 RSN IBSS: Fix EAPOL TX using control port
This was previously done only in supplicant role, but a similar change
is needed for the authenticator role.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-06 22:33:45 +02:00
Jouni Malinen
09f96acb9d tests: PSK/EAP without nl80211 control port
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-05 21:31:33 +02:00
Jouni Malinen
c52129bed8 nl80211: Allow control port to be disabled with a driver param
This is mainly for testing purposes to allow wpa_supplicant and hostapd
functionality to be tested both with and without using the nl80211
control port which is by default used whenever supported by the driver.
control_port=0 driver parameter will prevent that from happening.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-05 21:31:33 +02:00
Markus Theil
781c5a0624 nl80211: Use control port TX for AP mode
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-05 21:31:33 +02:00
Markus Theil
d8252a9812 nl80211: Report control port RX events
This allows EAPOL frames to be received over the separate controlled
port once rest of the driver interface is ready for this. By itself,
this commit does not actually change behavior since cfg80211 will not be
delivering these events without them being explicitly requested.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-05 21:30:41 +02:00
Markus Theil
a79ed06871 Add no_encrypt flag for control port TX
In order to correctly encrypt rekeying frames, wpa_supplicant now checks
if a PTK is currently installed and sets the corresponding encrypt
option for tx_control_port().

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-05 20:34:50 +02:00
Brendan Jackman
144314eaa7 wpa_supplicant: Send EAPOL frames over nl80211 where available
Linux kernel v4.17 added the ability to request sending control port
frames via nl80211 instead of a normal network socket. Doing this
provides the device driver with ordering information between the
control port frames and the installation of keys. This empowers it to
avoid race conditions between, for example, PTK replacement and the
sending of frame 4 of the 4-way rekeying handshake in an RSNA. The
key difference between a TX_CONTROL_PORT and normal socket send is
that the device driver will certainly get any EAPOL frames comprising
a 4-way handshake before it gets the key installation call
for the derived key. By flushing its TX buffers it can then ensure
that no pending EAPOL frames are inadvertently encrypted with a key
that the peer will not yet have installed.

Update the RSN supplicant system to use this new operation for sending
EAPOL-Key frames when the driver reports that this capability is
available; otherwise, fall back to a normal Ethernet TX.

I have tested this on DMG (11ad/ay) devices with an out-of-tree Linux
driver that does not use mac80211. Without this patch I consistently see
PTK rekeying fail if message 4/4 shares a stream with other in-flight
traffic. With this patch, and the driver updated to flush the relevant TX
queue before overwriting a PTK (knowing, now, that if there was a message
4/4 related to the key installation, it has already entered the driver
queue), rekeying is reliable.

There is still data loss surrounding key installation - this problem is
alluded to in IEEE Std 802.11-2016, 12.6.21, where extended Key ID
support is described as the eventual solution. This patch aims to at
least prevent rekeying from totally breaking the association, in a way
that works on kernels as far back as 4.17 (as per Alexander Wetzel
extended Key ID support should be possible on 5.2).

See http://lists.infradead.org/pipermail/hostap/2019-May/040089.html for
a little more context.

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2020-01-05 20:34:15 +02:00
Brendan Jackman
8759e9116a nl80211: Control port over nl80211 helpers
Linux kernel v4.17 added the ability to request sending controlled port
frames (e.g., IEEE 802.1X controlled port EAPOL frames) via nl80211
instead of a normal network socket. Doing this provides the device
driver with ordering information between the control port frames and the
installation of keys. This empowers it to avoid race conditions between,
for example, PTK replacement and the sending of frame 4 of the 4-way
rekeying handshake in an RSNA. The key difference between the specific
control port and normal socket send is that the device driver will
certainly get any EAPOL frames comprising a 4-way handshake before it
gets the key installation call for the derived key. By flushing its TX
buffers it can then ensure that no pending EAPOL frames are
inadvertently encrypted with a key that the peer will not yet have
installed.

Add a CONTROL_PORT flag to the hostap driver API to report driver
capability for using a separate control port for EAPOL frames. This
operation is exactly like an Ethernet send except for the extra ordering
information it provides for device drivers. The nl80211 driver is
updated to support this operation when the device reports support for
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211. Also add a driver op
tx_control_port() for request a frame to be sent over the controlled
port.

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2020-01-05 19:43:52 +02:00
Jouni Malinen
ccaabeaa03 driver: Remove unused send_ether() driver op
This was used only for FT RRB sending with driver_test.c and
driver_test.c was removed more than five years ago, so there is no point
in continuing to maintain this driver op.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-05 18:32:10 +02:00
Jouni Malinen
754cd71bf4 tests: WPS Application Extension attribute
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 23:39:40 +02:00
Bilal Hatipoglu
3d41dd7c50 WPS: Add application extension data to WPS IE
Application Extension attribute is defined in WSC tech spec v2.07 page
104. Allow hostapd to be configured to add this extension into WPS IE in
Beacon and Probe Response frames. The implementation is very similar to
vendor extension.

A new optional entry called "wps_application_ext" is added to hostapd
config file to configure this. It enodes the payload of the Application
Extension attribute in hexdump format.

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2020-01-04 23:39:30 +02:00
Jouni Malinen
b7bb2c0204 P2P: Move p2p_long_listen into struct wpa_global
This variable is not specific to any P2P group interface and since it
was already used through global->p2p_init_wpa_s, it is cleaner to simply
move this to the global structure so that there is a single variable
instead of per-interface variables and need to pick the correct
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 23:11:28 +02:00
Benjamin Berg
99eb150deb tests: Test p2p_long_listen longer than remain-on-channel
This tests an error, where the p2p_long_listen information from the
wrong device was used internally in wpa_supplicant when using the
separate P2P Device interface.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
2020-01-04 23:07:31 +02:00
Benjamin Berg
9ad3c12dd1 P2P: Always use global p2p_long_listen
The p2p_long_listen value was set on the control wpa_s struct while in a
lot of cases it operated on the p2p struct. Explicitly use the global
p2p_init_wpa_s struct in cases where we might not be operating on it
already.

Without this, simply starting a p2p_listen operation (e.g., using
wpa_cli) will not work properly. As the p2p_long_listen is set on the
controlling interface and wpas_p2p_cancel_remain_on_channel_cb() uses
p2p_init_wpa_s, it would not actually work. This results in
wpa_supplicant stopping listening after the maximum remain-on-channel
time passes when using a separate P2P Device interface.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
2020-01-04 23:07:31 +02:00
Jouni Malinen
e9aa399522 tests: PMF tests with not-protected disconnection using hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 20:41:52 +02:00
Jouni Malinen
9bedf90047 nl80211: Use monitor interface for sending no-encrypt test frames
Since NL80211_CMD_FRAME does not allow encryption to be disabled for the
frame, add a monitor interface temporarily for cases where this type of
no-encrypt frames are to be sent. The temporary monitor interface is
removed immediately after sending the frame.

This is testing functionality (only in CONFIG_TESTING_OPTIONS=y builds)
that is used for PMF testing where the AP can use this to inject an
unprotected Robust Management frame (mainly, Deauthentication or
Disassociation frame) even in cases where PMF has been negotiated for
the association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 20:23:05 +02:00
Jouni Malinen
e62a1cbaf1 tests: Detect tshark regression in wpas_mesh_gate_forwarding
Skip this test case if the used tshark version has regression in mesh
control field parsing:
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=15521

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 18:08:03 +02:00
Jouni Malinen
dad2f3253c tests: Initial GTK/IGTK RSC setting
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 13:07:47 +02:00
Jouni Malinen
8d84c75f7c Allow testing override for GTK/IGTK RSC from AP to STA
The new hostapd gtk_rsc_override and igtk_rsc_override configuration
parameters can be used to set an override value for the RSC that the AP
advertises for STAs for GTK/IGTK. The contents of those parameters is a
hexdump of the RSC in little endian byte order.

This functionality is available only in CONFIG_TESTING_OPTIONS=y builds.
This can be used to verify that stations implement initial RSC
configuration correctly for GTK/ and IGTK.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 13:05:26 +02:00
Jouni Malinen
c1714ec08c tests: ROAM command failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 18:09:57 +02:00
Jouni Malinen
af670cb418 SME: Postpone current BSSID clearing until IEs are prepared
sme_send_authentication() could fail before actually requesting the
driver to authenticate with a new AP. This could happen after
wpa_s->bssid got cleared even though in such a case, the old association
is maintained and still valid. This can result in unexpected behavior
since wpa_s->bssid would not match the current BSSID anymore.

Fix this by postponing clearing of wpa_s->bssid until the IE preparation
has been completed successfully.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 18:06:01 +02:00
Jouni Malinen
ecd54bace4 tests: DFS with RRM
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 16:00:02 +02:00