Commit graph

163 commits

Author SHA1 Message Date
Jouni Malinen
d0df54caa9 Change example hostapd.conf to use 2.4 GHz channel
This is more likely to work if someone tests the example file with
no or minimal changes.
2011-07-31 00:47:49 +03:00
Pavel Roskin
e783c9b0e5 madwifi: Implement set_freq for hostapd, adjust hostapd.conf
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-07-29 20:51:55 +03:00
Jouni Malinen
cb465555d4 Allow PMKSA caching to be disabled on Authenticator
A new hostapd configuration parameter, disable_pmksa_caching=1, can now
be used to disable PMKSA caching on the Authenticator. This forces the
stations to complete EAP authentication on every association when WPA2
is being used.
2011-07-05 17:13:04 +03:00
Jouni Malinen
fa5165586f WPS: Add a workaround for Windows 7 capability discovery for PBC
Windows 7 uses incorrect way of figuring out AP's WPS capabilities by
acting as a Registrar and using M1 from the AP. The config methods
attribute in that message is supposed to indicate only the configuration
method supported by the AP in Enrollee role, i.e., to add an external
Registrar. For that case, PBC shall not be used and as such, the
PushButton config method is removed from M1 by default. If pbc_in_m1=1
is included in the configuration file, the PushButton config method is
left in M1 (if included in config_methods parameter) to allow Windows 7
to use PBC instead of PIN (e.g., from a label in the AP).
2011-05-17 19:53:02 +03:00
Jouni Malinen
2944824315 hostapd: Add require_ht configuration parameter
This can be used to configure hostapd to reject association with
any station that does not support HT PHY.
2011-02-09 15:08:47 +02:00
Johannes Berg
d2da224948 AP: Enable WMM with default parameters by default for HT
If WMM is not disabled explicitly (wmm_enabled=0 in hostapd.conf),
enable WMM automatically whenever HT (ieee80211n) is enabled. Use
the default WMM parameters for AP TX queues and the EDCA parameters
advertised for stations in WMM IE if no overriding values are
included in the configuration.
2011-02-01 14:34:12 +02:00
Jouni Malinen
1161ff1ef5 hostapd: Allow TDLS use to be prohibited in the BSS
tdls_prohibit=1 and tdls_prohibit_chan_switch=1 and now be used to
disable use of TDLS or TDLS channel switching in the BSS using
extended cabilities IE as defined in IEEE 802.11z.
2011-01-28 19:21:59 +02:00
Johannes Berg
0d7e5a3a29 Allow AP mode to disconnect STAs based on low ACK condition
The nl80211 driver can report low ACK condition (in fact it reports
complete loss right now only). Use that, along with a config option, to
disconnect stations when the data connection is not working properly,
e.g., due to the STA having went outside the range of the AP. This is
disabled by default and can be enabled with disassoc_low_ack=1 in
hostapd or wpa_supplicant configuration file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-28 17:15:01 +02:00
Felix Fietkau
d3b4286967 Allow client isolation to be configured (ap_isolate=1)
Client isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging is
allowed.
2010-11-09 16:27:15 +02:00
Felix Fietkau
d38ae2ea85 Add bridge handling for WDS STA interfaces
By default, add them to the configured bridge of the AP interface
(if present), but allow the user to specify a separate bridge.
2010-11-09 16:12:42 +02:00
Jouni Malinen
7e3c178142 Remove unused TX queue parameters related to Beacon frames
These are not used by any driver wrapper, i.e., only the four
data queues (BK, BE, VI, VO) are configurable. Better remove these
so that there is no confusion about being able to configure
something additional.
2010-11-05 01:23:17 +02:00
Jouni Malinen
31fd64cc2f P2P: Add forgotten allow_cross_connection example 2010-09-09 07:17:20 -07:00
Jouni Malinen
962473c136 P2P: Add preliminary P2P Manager AP support for hostapd 2010-09-09 07:17:18 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
7f6ec672ea EAP server: Add support for configuring fragment size 2010-07-20 22:56:10 -07:00
Yogesh Ashok Powar
721abef9b3 Allow advertising of U-APSD functionality in Beacon
hostapd does not implement UAPSD functionality. However, if U-APSD
functionality is implemented outside hostapd, add support to advertise
the functionality in beacon.

Signed-off-by: yogeshp@marvell.com
2010-04-11 11:32:15 +03:00
Jouni Malinen
921a278604 Fix a typo in r1kh config parameter description
The second item on the line is R1KH-ID, not R0KH-ID.
2010-03-07 21:16:42 +02:00
Jouni Malinen
94627f6cc8 hostapd: Detect bridge interface automatically
This makes the bridge parameter unnecessary for cases where the interface
is already in a bridge and sysfs is mounted to /sys so that the detection
code works.

For nl80211, the bridge parameter can be used to request the AP
interface to be added to the bridge automatically (brctl may refuse to
do this before hostapd has been started to change the interface mode).
If needed, the bridge interface is also created.
2010-01-16 15:19:58 +02:00
Felix Fietkau
fbbfcbac29 hostapd: Add WDS (4-address frame) mode with per-station interfaces
This mode allows associated stations to use 4-address frames to allow
layer 2 bridging to be used. At least for the time being, this is only
supported with driver=nl80211.
2009-12-24 11:46:22 +02:00
Jouni Malinen
c0e4dd9eeb WPS: Make Config Methods configurable for wpa_supplicant
This adds config_methods configuration option for wpa_supplicant
following the design used in hostapd. In addition, the string is
now parsed in common code from src/wps/wps_common.c and the list
of configurable methods include all the defined methods from
WPS 1.0h spec.
2009-12-21 15:59:25 +02:00
Jouni Malinen
50b5bf4eda Remove obsolete Prism54.org driver support (driver_prism54.c)
The Prism54.org project seems have been dead for a while and it does not
look like this driver would ever be maintained again. Furthermore, it is
difficult to find a version that would work with the driver_prism54.c
wrapper and there is another driver for these card in the Linux kernel
tree.

The hostapd integration in driver_prism54.c is quite different from the
other driver wrappers and would require major effort to get it cleaned
up. Since there does not seem to be any real users for the cleaned up
version, there does not seem to be justification to spend this effort on
the wrapper. This old code is making it much more difficult to clean up
the driver interface and at this point, the best option seems to be to
remove the driver wrappers. Should someone really still need this, the
old code will continue to be available in hostapd 0.6.x.
2009-12-12 20:52:12 +02:00
Jouni Malinen
3484a18a13 hostapd: Remove unused bridge_packets configuration option
There was code for configuring this, but no driver wrapper actually
implements the actual setting. Remove this for now to reduce potential
confusion and to simply the driver interface.
2009-12-09 22:06:43 +02:00
Jouni Malinen
362bd35f2d Add more Doxygen documentation for RADIUS server implementation 2009-12-02 21:29:32 +02:00
Jouni Malinen
61693eaa80 hostapd: Remove unused passive scan functionality
This was not really supported by any of the included driver wrappers. If
this functionality is desired in the future, this (or something similar)
can be added with the changes needed into a driver wrapper to use the
mechanism.
2009-04-17 15:47:37 +03:00
Jouni Malinen
90ac1f9fc9 Allow more complex BSSID masks to be used for multi-BSSID
If every secondary BSS is configured with a pre-set BSSID, hostapd does
not enforce the BSSID mask requirements anymore, i.e., they are used
only if hostapd is responsible for generating MAC addresses for virtual
interfaces.
2009-03-12 22:01:26 +02:00
Jouni Malinen
d85825e355 Fix UP-to-AC mapping for prio 3 (EE) to be AC_BE, not AC_VI 2009-03-05 16:37:13 +02:00
Jouni Malinen
3ae0800c5f WMM cleanup (WME -> WMM rename, comments, etc.)
This updates the terminogy to match with the final WMM specification. In
addition, some of the WMM TSPEC structure fields were in incorrect order
and used without byte order swapping. Those are also taken care of this
cleanup patch.
2009-03-04 12:33:24 +02:00
Jouni Malinen
5eb4e3d024 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel
Try to match PRI/SEC channel with neighboring 20/40 MHz BSSes per
IEEE 802.11n/D7.0 11.14.3.2. This is not yet complete implementation,
but at least some parts of the 40 MHz coex are improved.

40 MHz operation maybe rejected (i.e., fall back to using 20 MHz) or
pri/sec channels may be switched if needed.
2009-02-04 21:19:54 +02:00
Jouni Malinen
6f4071c084 Do not use country_code default (was: US)
If country_code is not included in hostapd.conf, refuse to enable IEEE
802.11d and do not try to set the regulatory domain in kernel.
2009-01-30 12:43:19 +02:00
Jouni Malinen
f620268f13 WPS: Add support for external Registrars using UPnP transport
This adds mostly feature complete external Registrar support with the
main missing part being proper support for multiple external Registrars
working at the same time and processing of concurrent registrations when
using an external Registrar.

This code is based on Sony/Saice implementation
(https://www.saice-wpsnfc.bz/) and the changes made by Ted Merrill
(Atheros) to make it more suitable for hostapd design and embedded
systems. Some of the UPnP code is based on Intel's libupnp. Copyrights
and licensing are explained in src/wps/wps_upnp.c in more detail.
2009-01-29 18:47:02 +02:00
Jouni Malinen
3b2cf800af WPS: Lock AP Setup on multiple AP PIN validation failures
If a Registrar tries to configure the AP, but fails to validate the
device password (AP PIN), lock the AP setup after four failures. This
protects the AP PIN against brute force guessing attacks.
2009-01-23 21:57:43 +02:00
Jouni Malinen
4c29cae932 Added ap_settings option for overriding WPS AP Settings in M7
This optional configuration parameter can be used to override AP
Settings attributes in M7 similarly to extra_cred option for Credential
attribute(s) in M8.
2009-01-23 21:08:55 +02:00
Jouni Malinen
aabe26a136 WPS: Added option to disable AP auto-config on first registration
This operation can now be moved into an external program by configuring
hostapd with wps_cred_processing=1 and skip_cred_build=1. A new
ctrl_iface message (WPS-REG-SUCCESS <Enrollee MAC addr> <UUID-E>) will
be used to notify external programs of each successful registration and
that can be used as a tricker to move from unconfigured to configured
state.
2009-01-21 13:48:10 +02:00
Jouni Malinen
d745c7cc1a Added wps_cred_processing configuration option for hostapd
This behaves like the one in wpa_supplicant, i.e., hostapd can be
configured not to process new credentials (AP settings) internally and
instead pass the WPS attributes for an external program to process over
ctrl_iface.
2009-01-21 11:54:12 +02:00
Jouni Malinen
6fa68a0ee5 Added an option to add (or override) Credential attribute(s) in M8 2009-01-16 22:50:41 +02:00
Jouni Malinen
79da74a20c WPS: Generate UUID based on MAC address, if not set
Generate a SHA1 hash -based UUID from the local MAC address if the UUID
was not configured. This makes it easier to prepare for WPS since there
is no need to generate an UUID.
2009-01-01 22:56:52 +02:00
Jouni Malinen
45c94154a6 Updated SA Query procedure to use timeouts per 802.11w/D7.0
The previous max_attempts * timeout is now replaced with two timeouts
(one for each retry, the other one for maximum wait).
2008-12-26 12:30:34 +02:00
Jouni Malinen
e6f9861ace Added a note about mac80211-based drivers and nl80211 2008-12-20 13:02:29 +02:00
Jouni Malinen
b3e7a97df0 Add some notes on which channels can be used with HT40- and HT40+
This is not a complete list, but at least it can provide some help for
whoever is trying to configure hostapd for 802.11n HT40 operation.
2008-11-24 19:28:37 +02:00
Jouni Malinen
a8d8410e1f Added support for configuring secondary channel offset for HT40 2008-11-24 16:33:45 +02:00
Jouni Malinen
a86f6ccad7 Rename [40HT] to [HT40] in ht_capab 2008-11-24 16:11:19 +02:00
Jouni Malinen
fc14f56759 Added IEEE 802.11n HT capability configuration (ht_capab) 2008-11-24 15:44:25 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouni Malinen
fe2c5241b5 Remove experimental non-AP STA code from hostapd
This was used to allow hostapd to associate as a non-AP STA to another
AP one the same channel while still acting as an AP with the Host AP
driver. This was very experimental and did not work with all firmware
versions. Nowadays, much better way of doing this is to use mac80211
virtual non-AP STA interface. As such, this experimental code can be
removed from hostapd to reduce the code size and make MLME code easier
to understand since it is now only handling AP functionality.
2008-11-21 20:48:58 +02:00
Jouni Malinen
d52e94f965 Removed partial IEEE 802.11h implementation
This code was not finished and did not work with the current mac80211
design. In order to avoid confusing users, it is better to remove this
completely for now and look at new implementation to work with mac80211.
2008-11-21 19:45:20 +02:00
Jouni Malinen
581a8cde77 Added support for enforcing frequent PTK rekeying
Added a new configuration option, wpa_ptk_rekey, that can be used to
enforce frequent PTK rekeying, e.g., to mitigate some attacks against TKIP
deficiencies. This can be set either by the Authenticator (to initiate
periodic 4-way handshake to rekey PTK) or by the Supplicant (to request
Authenticator to rekey PTK).

With both wpa_ptk_rekey and wpa_group_rekey (in hostapd) set to 600, TKIP
keys will not be used for more than 10 minutes which may make some attacks
against TKIP more difficult to implement.
2008-11-06 19:57:21 +02:00
Jouni Malinen
2d86724409 EAP-FAST: Allow A-ID and A-ID-Info to be configured separately
Changed EAP-FAST configuration to use separate fields for A-ID and
A-ID-Info (eap_fast_a_id_info) to allow A-ID to be set to a fixed
16-octet len binary value for better interoperability with some peer
implementations; eap_fast_a_id is now configured as a hex string.
2008-10-19 09:55:59 +03:00
Jouni Malinen
a11c90a64a EAP-FAST: Make PAC-Key lifetime values configurable
The hardcoded values in eap_fast.c were replaced with values read from
hostapd.conf.
2008-10-08 17:25:47 +03:00
Jouni Malinen
378eae5e9b EAP-FAST: Added support for disabling anonymous/authenticated provisioning
eap_fast_prov config parameter can now be used to enable/disable different
EAP-FAST provisioning modes:
0 = provisioning disabled
1 = only anonymous provisioning allowed
2 = only authenticated provisioning allowed
3 = both provisioning modes allowed
2008-10-08 16:55:23 +03:00
Jouni Malinen
d64dabeebc Added a new driver wrapper, "none", for RADIUS server only configuration
This can be used to limit hostapd code size and clean up debug output for
configurations that do not use hostapd to control AP functionality.
2008-10-01 14:07:55 +03:00
Jouni Malinen
565861976d Added support for using SHA256-based stronger key derivation for WPA2
IEEE 802.11w/D6.0 defines new AKMPs to indicate SHA256-based algorithms for
key derivation (and AES-CMAC for EAPOL-Key MIC). Add support for using new
AKMPs and clean up AKMP processing with helper functions in defs.h.
2008-08-31 22:57:28 +03:00
Jouni Malinen
5d22a1d5aa IEEE 802.11w: Added association ping
This updates management frame protection to use the assocition ping process
from the latest draft (D6.0) to protect against unauthenticated
authenticate or (re)associate frames dropping association.
2008-08-31 11:04:47 +03:00
Jouni Malinen
271d2830ff Added support for setting VLAN ID for STAs based on local MAC ACL
This allows the accept_mac_file to be used as an alternative for RADIUS
server-based configuration. This is mainly to ease VLAN testing (i.e., no
need to set up RADIUS server for this anymore).
2008-08-28 18:43:26 +03:00
Jouni Malinen
839faf0475 Add configuration option for enabling optional use of short preamble 2008-08-21 18:36:21 +03:00
Jouni Malinen
de9289c8e9 Add preliminary IEEE 802.11n support into hostapd
This commit brings in cleaned up version of IEEE 802.11n implementation
from Intel (1). The Intel tarball includes number of other changes, too,
and only the changes specific to IEEE 802.11n are brought in here. In
addition, this does not include all the changes (e.g., some of the
configuration parameters are still missing and driver wrapper changes for
mac80211 were not included).

(1)
http://www.kernel.org/pub/linux/kernel/people/chuyee/wireless/iwl4965_ap/hostap_0_6_0_intel_0.0.13.1.tgz
2008-08-21 18:18:38 +03:00
Jouni Malinen
bf98f7f3bc Added support for opportunistic key caching (OKC)
This allows hostapd to share the PMKSA caches internally when multiple
BSSes or radios are being controlled by the same hostapd process.
2008-08-03 20:17:58 +03:00
Jouni Malinen
27e120c46d Cleaned up some of invalid documentation related to channel configuration. 2008-07-23 03:51:10 +03:00
Jouni Malinen
29222cd303 Added instructions on how to create the DH parameters files. 2008-05-21 10:53:56 +03:00
Jouni Malinen
dcf9c2bd77 Updated the comment on 'bridge' variable to mention nl80211 which needs
this parameter, too.
2008-05-07 13:51:00 +03:00
Jouni Malinen
502a293e30 TNC: Added TNC server support into documentation and ChangeLogs 2008-03-09 12:14:15 +02:00
Jouni Malinen
b0194fe07e Added max_listen_interval configuration option
This allows associations to be denied if the STA tries to use too large
listen interval. The default value is 65535 which matches with the field
size limits.
2008-02-27 17:54:06 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00