Commit graph

106 commits

Author SHA1 Message Date
Jouni Malinen
625f202a74 SAE: Allow enabled groups to be configured
hostapd.conf sae_groups parameter can now be used to limit the set of
groups that the AP allows for SAE. Similarly, sae_groups parameter is
wpa_supplicant.conf can be used to set the preferred order of groups. By
default, all implemented groups are enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
d136c376f2 SAE: Add support for Anti-Clogging mechanism
hostapd can now be configured to use anti-clogging mechanism based on
the new sae_anti_clogging_threshold parameter (which is
dot11RSNASAEAntiCloggingThreshold in the standard). The token is
generated using a temporary key and the peer station's MAC address.
wpa_supplicant will re-try SAE authentication with the token included if
commit message is rejected with a token request.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
2049a875bc WNM: Additional BSS Transition Management capability
Add some more functionality for BSS Transition Management:
- advertise support for BSS Transition Management in extended
  capabilities element
- add hostapd.conf parameter bss_transition=1 for enabling support
  for BSS Transition Management
- add "hostapd_cli disassoc_imminent <STA> <num TBTTs>" for sending
  disassociation imminent notifications for testing purposes
- wpa_supplicant: trigger a new scan to find another BSS if the
  current AP indicates disassociation imminent (TODO: the old AP needs
  to be marked to use lower priority to avoid re-selecting it)

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 20:27:30 +02:00
Vladimir Kondratiev
7829894c21 Introduce 60 GHz band
Basic support for the 60 GHz band. Neither P2P nor WPS are yet taken
care off. Allows to start AP with very simple config:

network={
        ssid="test"
        mode=2
        frequency=60480
        key_mgmt=NONE
}

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-18 11:50:35 +02:00
Jouni Malinen
b93c8509cc Add support for advertising UTF-8 SSID extended capability
This field can be used to indicate that UTF-8 encoding is used in the
SSID field.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 20:46:51 +02:00
Jouni Malinen
c79938a584 WNM: Enable WNM-Sleep Mode configuration with hostapd SME/MLME
This allows hostapd to process WNM-Sleep Mode Request when using the
internal SME/MLME.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:16:17 +02:00
Johannes Berg
3117ad4283 hostapd: Add second VHT frequency segment config
Add the configuration option vht_oper_centr_freq_seg1_idx
for the second segment of an 80+80 MHz channel and use it
when building the VHT operation IE.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-11-24 18:02:29 +02:00
Jouni Malinen
ee431d77a5 Add preliminary support for using SQLite for eap_user database
CONFIG_SQLITE=y option can now be used to allow the eap_user_file text
file to be replaced with a SQLite database
(eap_user_file=sqlite:/path/to/sqlite.db). hostapd.eap_user_sqlite
shows an example of how the database tables can be created for this
purpose. This commit does not yet include full functionality of the
text file format, but at least basic EAP-TTLS/MSCHAPv2 style
authentication mechanisms with plaintext passwords can be used for
tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-21 00:47:47 +02:00
Jouni Malinen
66979bb833 EAP-SIM DB: Optional use of SQLite database for pseudonyms
This allows hostapd to use an SQLite database for storing EAP-SIM/AKA
pseudonyms over process restarts. CONFIG_SQLITE=y build option adds
support for this and the SQLite database file is specified in eap_sib_db
configuration parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 16:04:52 +03:00
Jouni Malinen
b52f084cfa Add parameter for vendor specific elements into Beacon/Probe Response
The new vendor_elements parameter in hostapd.conf can be used to add new
vendor specific element(s) into Beacon and Probe Response frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 16:20:10 +03:00
Jay Katabathuni
8047b18691 Interworking: Add advertising of NAI Realm list
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-26 18:59:12 +03:00
Jay Katabathuni
a9277e85ca HS 2.0: Add advertisement of Operator Friendly Name
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 21:39:19 +03:00
Jay Katabathuni
4065a3092b HS 2.0: Add advertisement of WAN Metrics
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 20:28:40 +03:00
Jay Katabathuni
5ccc54aae4 HS 2.0: Add advertisement of Connection Capability
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 19:16:09 +03:00
Jay Katabathuni
df5934f194 HS 2.0: Add advertising of Operating Class Indication
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 18:26:32 +03:00
Jay Katabathuni
7515adb2b1 Interworking: Add advertising of 3GPP Cellular Network info
The anqp_3gpp_cell_net parameter can be used to configure hostapd
to advertise 3GPP Cellular Network ANQP information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 18:26:28 +03:00
Mahesh Palivela
9615994ea6 VHT: Add configuration of operating center frequency
Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-08-10 19:54:54 +03:00
Mahesh Palivela
140e850a66 VHT: Add option for requiring use of VHT
Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-08-10 19:53:24 +03:00
Mahesh Palivela
6c93c38d7c VHT: Document vht_oper_chwidth and fix indentation
Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-08-10 19:44:16 +03:00
Jouni Malinen
179099e676 Replace non-ASCII characters with ASCII characters
There is no point to use non-ASCII characters in this file when
perfectly fine ASCII characters are available..

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 19:32:15 +03:00
Michael Braun
a00237ceb8 Add hostapd configuration option to set VLAN naming scheme
Signed-hostap: M. Braun <michael-dev@fami-braun.de>
2012-08-10 14:09:03 +03:00
Jouni Malinen
e122bb70b8 hostapd: Add alternative format for configuring SSID
The new ssid2 parameter can be used as an alternative mechanism for
configuring SSID for hostapd. It uses the same formats that
wpa_supplicant uses in the configuration file for strings.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 16:27:40 +03:00
Jay Katabathuni
26fac8b6a0 Interworking: Add Domain Name element (AP)
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 22:25:19 +03:00
Jay Katabathuni
78bda93e83 Interworking: Add IP Address Type Availability element (AP)
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 22:25:16 +03:00
Jay Katabathuni
550a3958f7 Interworking: Add Network Auth Type element (AP)
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 22:25:14 +03:00
Jouni Malinen
8342185012 HS 2.0: Add mechanism for disabling DGAF
disable_dgaf=1 in hostapd.conf can now be used to disable downstream
group-addressed forwarding (DGAF). In this configuration, a unique
GTK (and IGTK) is provided to each STA in the BSS to make sure the
keys do not match and no STA can forge group-addressed frames.

An additional mechanism in the AP needs to be provided to handle some
group-addressed frames, e.g., by converting DHCP packets to unicast
IEEE 802.11 frames regardless of their destination IP address and by
providing Proxy ARP functionality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:52 +03:00
Jay Katabathuni
159c89ab4f HS 2.0: Add configuration for Hotspot 2.0 AP support
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:11 +03:00
Jouni Malinen
8494623403 Fix a typo in a comment
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-30 17:55:41 +03:00
Mahesh Palivela
efe45d1471 hostapd: Initial IEEE 802.11ac (VHT) definitions
Add IEEE 802.11ac definitions for config, IEEE structures, constants.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-06-30 13:52:13 +03:00
Jouni Malinen
51ca03f470 WPS: Document NFC use cases with password/config token
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:28:49 +03:00
Jouni Malinen
bde7ba6caf RADIUS DAS: Validate Event-Timestamp
DAS will now validate Event-Timestamp value to be within an acceptable
time window (300 seconds by default; can be set using
radius_das_time_window parameter). In addition, Event-Timestamp can be
required in Disconnect-Request and CoA-Request messages with
radius_das_require_event_timestamp=1.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 17:43:36 +03:00
Jouni Malinen
b031338cf0 Add preliminary RADIUS dynamic authorization server (RFC 5176)
This adds the basic DAS mechanism to enable hostapd to be configured
to request dynamic authorization requests (Disconnect-Request and
CoA-Request). This commit does not add actual processing of the
requests, i.e., this will only receive and authenticate the requests
and NAK them regardless of what operation is requested.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-06 22:02:42 +03:00
Jouni Malinen
af35e7af7f hostapd: Allow addition of arbitrary RADIUS attributes
New configuration parameters radius_auth_req_attr and
radius_acct_req_attr can now be used to add (or override) RADIUS
attributes in Access-Request and Accounting-Request packets.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 20:19:56 +03:00
Jouni Malinen
86f6053aa2 hostapd: Add optional Chargeable-User-Identity request (RFC 4372)
radius_request_cui=1 configuration parameter can now be used to
configure hostapd to request CUI from the RADIUS server by including
Chargeable-User-Identity attribute into Access-Request packets.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 18:19:54 +03:00
Jouni Malinen
648cc711a5 GAS server: Add support for ANQP Venue Name element
The new venue_name configuration parameter can now be used to configure
the ANQP Venue Name values that stations can request through GAS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-26 22:53:22 +02:00
Yogesh Ashok Powar
ef01fa7bfa hostapd: Make inactivity polling configurable
hostapd uses the poll method to check if the station is alive
after the station has been inactive for ap_max_inactivity seconds.
Make the poll mechanism configurable so that user can choose to
disconnect idle clients.

This can be especially useful when some devices/firmwares have
restrictions on the number of clients that can connect to the AP
and that limit is smaller than the total number of stations trying
to use the AP.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
2011-12-25 20:57:01 +02:00
Michael Braun
05ab9712b9 Allow WPA passphrase to be fetched with RADIUS Tunnel-Password attribute
This allows per-device PSK to be configured for WPA-Personal using a
RADIUS authentication server. This uses RADIUS-based MAC address ACL
(macaddr_acl=2), i.e., Access-Request uses the MAC address of the
station as the User-Name and User-Password. The WPA passphrase is
returned in Tunnel-Password attribute in Access-Accept. This
functionality can be enabled with the new hostapd.conf parameter,
wpa_psk_radius.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2011-12-11 13:01:57 +02:00
Bharat Chakravarty
8e5f913456 WPS: Allow RF Bands value to be overridden
A new hostapd.conf parameter, wps_rf_bands, can now be used to fix the
RF Bands value in cases where hw_mode is not set or when operating a
dual band dual concurrent AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-30 17:44:43 +02:00
Dan Harkins
4301163930 EAP-pwd: Document group configuration for hostapd authentication server 2011-11-19 16:32:21 +02:00
Jouni Malinen
39b97072b2 Add support for Time Advertisement
This adds preliminary support for IEEE 802.11v Time Advertisement
mechanism with UTC TSF offset.
2011-10-18 00:24:16 +03:00
Jouni Malinen
4b2a77aba2 Interworking: Add support for configuring Roaming Consortium List 2011-10-17 23:55:50 +03:00
Jouni Malinen
b83e3e93c8 IEEE 802.11u: Add configuration and advertisement for Interworking 2011-10-16 23:55:34 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
d0df54caa9 Change example hostapd.conf to use 2.4 GHz channel
This is more likely to work if someone tests the example file with
no or minimal changes.
2011-07-31 00:47:49 +03:00
Pavel Roskin
e783c9b0e5 madwifi: Implement set_freq for hostapd, adjust hostapd.conf
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-07-29 20:51:55 +03:00
Jouni Malinen
cb465555d4 Allow PMKSA caching to be disabled on Authenticator
A new hostapd configuration parameter, disable_pmksa_caching=1, can now
be used to disable PMKSA caching on the Authenticator. This forces the
stations to complete EAP authentication on every association when WPA2
is being used.
2011-07-05 17:13:04 +03:00
Jouni Malinen
fa5165586f WPS: Add a workaround for Windows 7 capability discovery for PBC
Windows 7 uses incorrect way of figuring out AP's WPS capabilities by
acting as a Registrar and using M1 from the AP. The config methods
attribute in that message is supposed to indicate only the configuration
method supported by the AP in Enrollee role, i.e., to add an external
Registrar. For that case, PBC shall not be used and as such, the
PushButton config method is removed from M1 by default. If pbc_in_m1=1
is included in the configuration file, the PushButton config method is
left in M1 (if included in config_methods parameter) to allow Windows 7
to use PBC instead of PIN (e.g., from a label in the AP).
2011-05-17 19:53:02 +03:00
Jouni Malinen
2944824315 hostapd: Add require_ht configuration parameter
This can be used to configure hostapd to reject association with
any station that does not support HT PHY.
2011-02-09 15:08:47 +02:00
Johannes Berg
d2da224948 AP: Enable WMM with default parameters by default for HT
If WMM is not disabled explicitly (wmm_enabled=0 in hostapd.conf),
enable WMM automatically whenever HT (ieee80211n) is enabled. Use
the default WMM parameters for AP TX queues and the EDCA parameters
advertised for stations in WMM IE if no overriding values are
included in the configuration.
2011-02-01 14:34:12 +02:00
Jouni Malinen
1161ff1ef5 hostapd: Allow TDLS use to be prohibited in the BSS
tdls_prohibit=1 and tdls_prohibit_chan_switch=1 and now be used to
disable use of TDLS or TDLS channel switching in the BSS using
extended cabilities IE as defined in IEEE 802.11z.
2011-01-28 19:21:59 +02:00