Commit graph

115 commits

Author SHA1 Message Date
Jouni Malinen
ba3081f1dc dpp-nfc: Start listen operation more completely for NFC Tag write cases
Share the same setup steps from the negotiated connection handover to
fix issues with NFC Tag write cases in AP mode. This addresses issues in
the AP mode DPP listen operation not actually receiving anything when
the write-a-tag code path was used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-24 23:41:13 +03:00
Jouni Malinen
55a366d7a8 dpp-nfc: Fix recv_octets() regression
The updated socket.poll() loop did not terminate properly in cases where
no response is available. Fix that to check for both False and None.

Fixes: 1733e356e4 ("dpp-nfc: Fix handover client wait for receiving handover select")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-15 00:26:21 +03:00
Jouni Malinen
1733e356e4 dpp-nfc: Fix handover client wait for receiving handover select
This was supposed to wait for up to 3.0 seconds for the handover select,
but the incorrect loop terminated ended up limiting this to a single
iteration of 0.1 second wait. This was too fast for some cases like the
AP mode operation where it may take significant time to enable the radio
for listening to DPP authentication messages.

Fix the loop to allow that full three second wait for the response to be
used. In addition, report the amount of time it takes to receive the
response.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-14 00:11:44 +03:00
Jouni Malinen
86fd6755cb dpp-nfc: Use --altchan value in handover server
Use the alternative channel list in the handover server role when
processing an alternative proposal. This was previously done only in the
handover client role, but with the updated design, both roles act in a
similar manner for the case where the alternative channel list is
specified.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-11 23:44:48 +03:00
Jouni Malinen
315422196a dpp-nfc: Update listen channel based on channel list when writing a tag
Do not use the hardcoded channel 1 (2412 MHz) with DPP_LISTEN if a
channel list is specified when writing an NFC Tag. Instead, pick the
first channel from that list as the listen channel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-10 23:52:11 +03:00
Jouni Malinen
38ef655eb5 dpp-nfc: Report negotiated connection handover result
Print out a summary of the result in yellow text.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 01:23:39 +03:00
Jouni Malinen
4d54618424 dpp-nfc: Stop only_one run after failed handover attempt
Do not require connection handover to succeed before stopping the loop
in the only_one case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 01:09:31 +03:00
Jouni Malinen
f7b5a1d347 dpp-nfc: Do not indicate no initial HS as failure if alt HR will be sent
Do not use red color for the "No response receive" message in case
another HR will be sent after this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 01:00:11 +03:00
Jouni Malinen
475b34665c dpp-nfc: Improved version of HandoverServer::serve()
Fix processing of the case where no handover select is sent out and add
automatic (delayed) termination of the link on completing the handover
successfully.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 01:00:11 +03:00
Jouni Malinen
dc0795e4ff dpp-nfc: Stop process after successful handover client completion
terminate_now was not being set in the only_one case with connection
handover. Set it for that case as well as the tag cases to automatically
close down the link once it is not needed anymore.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 00:44:49 +03:00
Jouni Malinen
b00bbbfe54 dpp-nfc: Optimize HandoverClient message receiving for alternative HR case
Use a shorter polling interval in recv_octets() to be able to send out
the alternative HR more quickly when using a single thread and handover
client. In addition, fix recv_records() to handle normal exception cases
like not receiving anything.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 00:44:47 +03:00
Jouni Malinen
bbfb7b9feb dpp-nfc: Use a single handover client thread
Avoid extra complexity from use a separate thread to send out the
alternative proposal.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-31 00:44:12 +03:00
Jouni Malinen
aaa8638ed2 dpp-nfc: Add a class for maintaining connection handover state
This cleans up the shared state between the handover server and client.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-30 21:34:37 +03:00
Jouni Malinen
66d74626ba dpp-nfc: Reuse the same handover client for alternative URI
Postpone closing of the handover client to allow the same client to be
used for sending both handover request messages if an alternative URI
needs to be tried.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-30 20:43:26 +03:00
Jouni Malinen
6e904441c8 dpp-nfc: Add peer URI into the HS in testing mode
This makes it easier to confirm that the correct pair of the HR and the
HS were used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-30 20:43:26 +03:00
Jouni Malinen
3021b14c49 dpp-nfc: Enable more verbose nfcpy debugging
Set logging level to various upper layer nfcpy modules to enable more
detailed debugging of the actual NFC operations when requested (-d on
the command line).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-30 16:49:40 +03:00
Jouni Malinen
1d3e16d0b0 dpp-nfc: Skip P2P management interfaces
Do not try to perform DPP operations on the P2P management interface
when no specific interface has been identified.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-30 12:51:56 +03:00
Jouni Malinen
e9c192ffc7 dpp-nfc: Ignore (no) response to initial handover request
If an alternative proposal (second handover request) is sent, the
response (or lack of it) to the initial handover request should be
ignored.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:46:20 +03:00
Jouni Malinen
7d27bcb8e7 dpp-nfc: Do not allow more than one alternative channel proposal
This avoids potential loops of endless alternative URI exchanges over
NFC negotiated connection handover. Only allow one such alternative
proposal and declarare the handover as a failure if another alternative
were needed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:27:06 +03:00
Jouni Malinen
6eaee933d7 dpp-nfc: Add test mode for negotiated connection handover
Allow all actual DPP processing steps in wpa_supplicant to be skipped by
specifying hardcoded URI values. Also allow a hardcoded crn to be
specified to force specific handover requestor/selector roles.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:27:06 +03:00
Jouni Malinen
74cd38ac69 dpp-nfc: Return failure status if operation fails
For now, this is done only for the case where the NFC Device is not
usable and if writing a single tag fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-23 12:26:46 +03:00
Jouni Malinen
7e2edfbc1a dpp-nfc: Add color and details for interactive operations
Make the debug output easier to read when performing interactive NFC
operations on a device that has a terminal showing the log.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-23 12:10:26 +03:00
Jouni Malinen
09c22bb782 dpp-nfc: Fix regression in NFC Tag writing
The change to checking DPP_LISTEN return value ended up overwriting the
actual URI information from wpas_get_nfc_uri().

Fixes: 288c0ffaaa ("dpp-nfc: Do not hardcode netrole for NFC Tag writing cases")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-23 11:32:21 +03:00
Jouni Malinen
1e4a42c745 dpp-nfc: Detect a non-NDEF tag when trying to write
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-23 11:27:27 +03:00
Jouni Malinen
288c0ffaaa dpp-nfc: Do not hardcode netrole for NFC Tag writing cases
Allow netrole to be specified for NFC Tag writing cases. Previously,
this was hardcoded to use netrole=configurator when starting the listen
operation. Now the netrole parameter is not included by default, but any
netrole value can be specified with the new --netrole command line
argument.

In addition, fix the listening frequency for the case where a channel is
picked.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-23 01:30:30 +03:00
Jouni Malinen
c9dc075fcd dpp-nfc: Fix connection handover renegotiation
The use of the alternative channel list did not work properly for the
case were both ends were trying to initiate the negotiated connection
handover. Fix this by always starting a new connection handover client
thread for sending the alternative proposal and ignoring peer messages
(likely something from the first attempt) during this modified attempt.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-24 22:37:52 +03:00
Jouni Malinen
5908fedc10 dpp-nfc: Support channel list negotiation
If the peer's channel list in negotiated handover does not have any
common channels and the local end is configured with an alternative
channel list, try to initiate another negotiation handover with the
alternative channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-23 13:24:38 +03:00
Jouni Malinen
eddf22e1f2 dpp-nfc: Update debug print for tag-read-only operation
Be clearer about only a tag read being allowed when dpp-nfc is
configured to not allow connection handover.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-23 00:57:18 +03:00
Jouni Malinen
7adea21d2f dpp-nfc: Enable hostapd beaconing for listen state
This is needed to be able to receive Public Action frames when hostapd
was initially started with start_disabled=1.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:46:41 +03:00
Jouni Malinen
134ad50b0e dpp-nfc: Clean up debug prints when handover select is received
If the local device becomes the handover selector, make the debug log
entries about client functionality not receiving the response clearer
since that is not really an error case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:20:26 +03:00
Jouni Malinen
5d49c1bf7c dpp-nfc: Do not indicate a single channel 1 by default
Allow any channel to be used by not including a specific single channel
in the handover request without a need (for AP mode, use the current
operating channel). When sending out the handover select, pick a single
channel if no specific channel has been negotiated.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:17:40 +03:00
Jouni Malinen
d0e2d8091f dpp-nfc: Make handover request collision detection more robust
Wait up to 100 ms for own handover request transmission to succeed if
peer handover request is received, but own crn is not yet available.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 12:10:59 +03:00
Jouni Malinen
8791e7461c dpp-nfc: Write debug info to summary log
Convert most print() calls to use the summary() helper so that the
printed information gets written into a log file as well. In addition,
start using a mutex lock to synchronize debug prints between threads to
avoid merging of messages from different contexts.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 12:03:53 +03:00
Jouni Malinen
1e0bc897ab dpp-nfc: Collision detection for handover request
Address possible handover request collisions for cases where both
devices try to initiate handover simultaneously.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 02:26:01 +03:00
Jouni Malinen
9ad3fe9343 dpp-nfc: Start handover server regardless of init-on-touch setting
The previous version was trying to force the handover roles based on the
--init-on-touch parameter on both sides. That is fine for some test
scenarios, but not appropriate for more normal use cases. Change this
design to enable handover server in all cases and only control starting
of the handover client based on --init-on-touch.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 01:21:01 +03:00
Jouni Malinen
24efcdf74d dpp-nfc: Own MAC address fetching from hostapd
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 00:44:27 +03:00
Jouni Malinen
8f96f2c3b1 dpp-nfc: Be more graceful when wpa_supplicant is not available
Do not try to proceed with negotiated connection handover if
wpa_supplicant control interface is not available.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 00:31:32 +03:00
Jouni Malinen
0b04d3c578 dpp-nfc: Allow wpa_supplicant control interface directory to be set
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:52:09 +03:00
Jouni Malinen
69dfbe6a93 dpp-nfc: Use Configurator/Enrollee parameters with tag reading
This was previously done only for the negotiated connection handover
case, but the same parameters are useful for the tag reading cases (URI
record and static handover).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:46:50 +03:00
Jouni Malinen
f85fb349fd dpp-nfc: More robust determination of the script directory
Make it more robust to import wpaspy regardless of how dpp-nfc.py is
being executed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:29:25 +03:00
Jouni Malinen
0086c14528 DPP: Extend NFC bootstrapping script for more control by caller
Add more parameters to dpp-nfc.py to allow it to be used with more
detailed control by the caller. This allows Enrollee/Configurator roles
to be selected and Configurator parameters to be specified on the
command line.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-12 00:57:44 +03:00
Jouni Malinen
b056275111 Fix exception checking in a wpa_supplicant P2P example script
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-15 18:36:29 +02:00
Jouni Malinen
4dc3b70deb DPP: Try to negotiate different parameters if NFC handover fails
This is mainly for NFC testing purposes now since the own DPP parameters
are not yet updated.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-08 07:19:53 +02:00
Jouni Malinen
61c049da3d DPP: Allow local channel list to be set
The new dpp-nfc.py command line argument --chan can be used to replace
the local channel list default (81/1).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-08 07:19:53 +02:00
Jouni Malinen
703c2b6457 DPP: Example script for NFC bootstrapping method
This Python script is an example on how nfcpy can be used to drive an
NFC Device to perform DPP bootstrapping operations over DPP (tag with
NFC URI and negotiated connection handover).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-27 21:58:45 +02:00
Lubomir Rintel
6a8dee76d4 wpa_supplicant: Drop the old D-Bus interface support
This drops support for the fi.epitest.hostap.WPASupplicant D-Bus name
along with the associated CONFIG_CTRL_IFACE_DBUS option. Nothing should
really be using this since 2010.

This is a just a straightforward removal. Perhaps the dbus_common.c and
dbus_new.c can be merged now. Also, the "_NEW" suffix of the config
option seems to make even less sense than it used to.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-03-09 18:33:26 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Davide Caratti
2b7f46f1c7 examples: Fix shellcheck warnings in wps-ap-cli
use 'printf' instead of 'echo -n', to suppress the following warning:

In POSIX sh, echo flags are undefined. [SC2039]

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2018-11-22 15:53:30 +02:00
Jouni Malinen
a82349347d DPP: Add an example python script for QR Code operations
This script can be used to process Android logcat information for
scanned QR Codes (e.g., from Barcode Scanner app) and also to display QR
Codes for locally generated bootstrap keys.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-22 14:52:28 +03:00