Commit graph

16976 commits

Author SHA1 Message Date
Jouni Malinen
ffcca901e7 tests: DPP Authentication Request destination address in chirp case
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2021-02-09 20:43:33 +02:00
Jouni Malinen
ad59639ed8 DPP2: Fix Authentication Request destination in the chirping case
The Authentication Request frames triggered by the reception of a
Presence Announcement frame were sent to the broadcast address. This is
not correct behavior since the source MAC address of the Presence
Announcement frame was supposed to override the Responder MAC address.
Fix this by using that source MAC address to avoid unnecessary use of
broadcast frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2021-02-09 20:41:08 +02:00
Aloka Dixit
598f671321 SAE: Avoid driver STA entry removal unnecessarily when using H2E/PK
The new status code values for SAE H2E and PK resulted in the
sta->added_unassoc cases incorrectly removing the STA entry after
successful SAE commit messages. Fix this by using sae_status_success()
instead of direct check for WLAN_STATUS_SUCCESS when processing SAE
commit messages before removing station entry.

Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2021-02-08 23:56:59 +02:00
Ilan Peer
99cd453720 hw_feature: Correctly select mode in case of the 6 GHz band
There are 2 HW modes with IEEE80211_MODE_A: one for the 5 GHz channels
and one for 6 GHz channels. Since hw_get_chan() checks all the
compatible hw modes, eventually, an incorrect hw mode is selected.

To fix this, add a function that checks if a specific mode supports
the requested frequency and if so use it as the current mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-08 00:54:10 +02:00
Jouni Malinen
cc96f45f4f tests: New HE configuration parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-08 00:45:42 +02:00
Rajkumar Manoharan
f728c867e3 AP: Extend Spatial Reuse Parameter Set
Extend SPR element to support following fields and pass all
information to kernel for driver use.
 * Non-SRG OBSS PD Max Offset
 * SRG BSS Color Bitmap
 * SRG Partial BSSID Bitmap

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:41:52 +02:00
Rajkumar Manoharan
9f9d3d3625 Allow HE MCS rate selection for Beacon frames
Allow HE MCS rate to be used for beacon transmission when the driver
advertises the support. The rate is specified with a new beacon_rate
option "he:<HE MCS>" in hostapd configuration.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:26:38 +02:00
Rajkumar Manoharan
7f2f262e6d nl80211: Support the 6 GHz band for beacon rate configuration
Use the correct enum nl80211_band value when configuring the beacon rate
for the 6 GHz band.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:26:38 +02:00
Rajkumar Manoharan
c3d557b4df hostapd: Add HE 6 GHz band capability configuration
Enable user to configure Maximum MPDU Length, Maximum A-MPDU Length
Exponent, Rx Antenna Pattern Consistency, and Tx Antenna Pattern
Consistency of 6 GHz capability through config file.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:09:45 +02:00
Jouni Malinen
bd8b170302 EAP-AKA: Check that ID message storing succeeds
This could fail in theory if running out of memory, so better check for
this explicitly instead of allowing the exchange to continue and fail
later due to checkcode mismatch.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 23:40:20 +02:00
Jouni Malinen
e781f7c860 Fix compiler warning on CONFIG_AP without CONFIG_P2P builds
The static function is_chanwidth160_supported() is called only within
CONFIG_P2P block so the function itself needs to have matching condition
for build.

Fixes: ed24bad1d9 ("AP: Check driver support while auto-selecting bandwidth for AP/P2P GO")
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 19:12:24 +02:00
Jouni Malinen
4c9b16602d Update Visual Studio projects to match file renaming
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 18:21:04 +02:00
Jouni Malinen
11cd1ffc71 tests: Fix fuzzing test build after file rename
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 18:16:28 +02:00
Jouni Malinen
48cfb52b7e Rename blacklist.[ch] to bssid_ignore.[ch]
This completes renaming of this functionality for a list of temporarily
ignored BSSIDs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 17:28:45 +02:00
Jouni Malinen
626fc0dcd0 Rename wpa_blacklist to wpa_bssid_ignore
This is more accurate name for this functionality of temporarily
ignoring BSSIDs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 17:28:45 +02:00
Jouni Malinen
b58ac90c38 Rename INTERWORKING_BLACKLISTED define
Use more accurate INTERWORKING_EXCLUDED for this. The actual event
prefix is not changed to remains compatible with external components
using this control interface event message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 16:43:54 +02:00
Jouni Malinen
7a1f1d8d77 tests: Use the new BSSID_IGNORE name for the command
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 16:41:10 +02:00
Jouni Malinen
72cd4293fb Rename the control interface BLACKLIST command to BSSID_IGNORE
Use a more specific name for the control interface command used for
managing the list of BSSIDs that are temporarily ignored.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 16:29:53 +02:00
Jouni Malinen
125f0748e4 tests: Use new names for network profile BSSID ignore/accept parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 16:19:09 +02:00
Jouni Malinen
752b1c6081 Rename network profiles parameters for ignoring/accepted BSSIDs
Rename the network profile parameters bssid_blacklist and
bssid_whitelist to bssid_ignore and bssid_accept to use more specific
names for the configuration of which BSSs are ignored/accepted during
BSS selection. The old parameter names are maintained as aliases for the
new names to avoid breaking compatibility with previously used
configurations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 16:18:26 +02:00
Jouni Malinen
6a12acbb78 wlantest: Add new key_mgmt and rsn_capab values for BSS/STA debug prints
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 13:57:03 +02:00
Jouni Malinen
e6ac269433 radiotap: Update radiotap parser
Update the radiotap parser to the latest version of the
http://git.sipsolutions.net/radiotap.git/ library.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 13:25:13 +02:00
Jouni Malinen
136bbf15c3 wlantest: Add more details about protected FTM frames
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 13:11:34 +02:00
Jouni Malinen
b9fd8191a5 wlantest: Recognize the FTM bit in the CCMP Key ID octet
This previously reserved bit is now used in FTM to help select the
appropriate replay counter. Silence the warning about use of a reserved
bit for this. wlantest does not yet support the actual replay counter
processing for FTM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 12:30:03 +02:00
Jouni Malinen
f56eec7c1a wlantest: Process Action No Ack frames like Action frames
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 12:00:12 +02:00
Jouni Malinen
56a04ae1a1 wlantest: Support TK list for Management frame decryption
Use the TKs from the PTK file (-T command line argument) to try to
decrypt encrypted Management frames if no BSS/STA key can be found based
on addresses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 11:37:58 +02:00
Janusz Dziedzic
fce6fb0ec2 tests: DFS pre CAC tests
Add test cases that check preCAC, which is available for EU regulatory
domain. Also confirm that preCAC is not used for US.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2021-02-07 10:34:02 +02:00
Janusz Dziedzic
ef26fc19fa DFS: Allow switch to an available channel
For EU, where preCAC is allowed, we should allow switch to DFS available
channels, instead of restarting BSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2021-02-07 10:30:09 +02:00
Jouni Malinen
045a24273e tests: MAC ACL accept list changes
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 10:23:45 +02:00
Masafumi Utsugi
f98fe2fd00 hostapd: Report errors ACCEPT_ACL/DENY_ACL control interface commands
Return FAIL for couple of the operations that were previously ignoring
invalid addresses without reporting errors.

Signed-off-by: Masafumi Utsugi <mutsugi@allied-telesis.co.jp>
2021-02-07 10:20:58 +02:00
Masafumi Utsugi
15251c6584 hostapd: Fix dynamic ACCEPT_ACL management over control interface
hostapd_disassoc_accept_mac() was called after a new accept MAC address
was added (ACCEPT_ACL ADD_MAC), but this function should have been
called after an accept MAC address was removed and accept MAC list was
cleared to disconnect a STA which is not listed in the update accept MAC
address list. Fix this by moving the call to places where a connected
STA can actually end up losing its previously present accept entry.

Signed-off-by: Masafumi Utsugi <mutsugi@allied-telesis.co.jp>
2021-02-07 10:17:57 +02:00
Janusz Dziedzic
0f8994b11d tests: Extend Multi AP tests
Add option to:
 - add a new AP on the same phy that the backhaul-sta uses
 - run CSA from the parent

Adding a new AP (backhaul/fronthaul) on the same phy we have for
backhaul-sta is closer to the real repeater implementation.

Add a test case for that and run CSA.

This is a common problem when we have on the same phy:
 - connected backhaul STA
 - we started fronthaul/backhaul AP
 - we receive (from parent) CSA on the STA interface

This is multi_ap_wps_shared_apdev_csa test case, which fails today with
both mac80211_hwsim and ath9k. To avoid always failing test cases,
ignore this failure for now. Full validation can be enabled once the
issue behind this is fixed.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2021-02-06 18:05:50 +02:00
Janusz Dziedzic
e663221727 tests: Pass ful params_backhaul in Multi AP test cases
Pass the backhaul parameters as a parameter. This is in preparation for
channel switch test for Multi AP.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2021-02-06 18:03:58 +02:00
Raphaël Mélotte
871d6648f5 hostapd: Add multi_ap settings to get_config() output
Since a running hostapd is not necessarily using the settings that are
in the configuration file (if they were changed at runtime, or the file
was changed but not reloaded, etc.), being able to get their value at
runtime can be useful (to know if they have to be updated for example).

If multi_ap is set, also print the SSID and passphrase (or PSK).

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 18:03:58 +02:00
Raphaël Mélotte
3a3ea68a36 tests: Add WPS test with dynamic update
This test first configure hostapd with an initial SSID
('test-wpa2-psk-start'). Then a new SSID is configured
('test-wpa2-psk-new') using SET and RELOAD. Next, a station is
associated using WPS, and the test verifies that the new SSID was served
to the station.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 18:03:41 +02:00
Raphaël Mélotte
f95ccc102a WPS: Reconfigure credentials on hostapd config reload
When new credentials are configured and hostapd is reconfigured using
SIGHUP (or RELOAD on the ctrl_iface), also update the WPS credentials.

Before these changes, when WPS is triggered the Registar always serves
the credentials that were configured when hostapd started.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 17:15:31 +02:00
Raphaël Mélotte
2fd90eb095 WPS: Use helper variables to clean up code
This is in preparation of larger changes in hostapd_update_wps() to keep
the commits more readable.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 17:12:24 +02:00
Mikael Kanstrup
f7bbad5768 wpa_supplicant: Configurable fast-associate timer threshold
For Android the default value of 5 seconds is usually too short for
scan results from last scan initiated from settings app to be
considered for fast-associate. Make the fast-associate timer value
configurable so that a suitable value can be set based on a systems
regular scan interval.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2021-02-06 16:56:30 +02:00
Arowa Suliman
b829b7003a wpa_supplicant: Notify freq change on CH_SWITCH
wpa_supplicant does not send a D-Bus notification of the BSS frequency
change when a CSA happens. Sending a PropertyChanged signal with the
updated frequency will notify the network manager quickly, instead of
waiting for the next scan results.

Signed-off-by: Arowa Suliman <arowa@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
2021-02-06 16:50:19 +02:00
Andrei Otcheretianski
a033e886b2 tests: Fix regdom cleanup in some p2p_channel tests
cfg80211 may ignore user hints while there are active COUNTRY_IE hints,
thus at some timings it may ignore the country setting back to world
domain. Fix it by making sure the country is set only after all the
interfaces are stopped. In addition, call a more robust
clear_regdom_dev() function.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 16:18:40 +02:00
Michal Kazior
3a00a86bb9 hostapd: Fix dpp_listen in DPP responder scenario
Some time ago it was found some drivers are setting their hw/ucode RX
filters restrictively enough to prevent broadcast DPP Action frames from
being received at upper layers in the stack.

A set of patches was introduced to the kernel and
ath9k driver as well as wpa_supplicant, e.g.,

  a39e9af90 ("nl80211: DPP listen mode callback")
  4d2ec436e ("DPP: Add driver operation for enabling/disabling listen mode")

However, the hostapd code itself was not calling the new multicast
registration. As such the AP side of things wasn't working as expected
in some scenarios. I've found this while trying to get ath9k working as
an AP Responder/Configurator.

The problem wasn't seen on, e.g., mac80211 hwsim driver.

Extend the wpa_supplicant mechanism to work with hostapd as well.

Signed-off-by: Michal Kazior <michal@plume.com>
2021-02-06 16:06:15 +02:00
Raphaël Mélotte
9ec28b657e tests: Add ap_notify_mgmt_frames
Test that if notify_mgmt_frames is enabled and a station connects we do
get AP-MGMT-FRAME-RECEIVED, and that it includes an Authentication
frame.

Also test that if notify_mgmt_frames is disabled, no Management frame is
sent on ctrl_iface when a station connects.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 13:58:02 +02:00
Raphaël Mélotte
4a7e0ac268 hostapd: Add an option to notify management frames on ctrl_iface
In some contexts (e.g., Multi-AP) it can be useful to have access to
some of the management frames in upper layers (e.g., to be able to
process the content of association requests externally).

Add 'notify_mgmt_frames'. When enabled, it will notify the ctrl_iface
when a management frame arrives using the AP-MGMT-FRAME-RECEIVED event
message.

Note that to avoid completely flooding the ctrl_iface, not all
management frames are included (e.g., Beacon and Probe Request frames
are excluded).

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 13:56:18 +02:00
Ircama
e79febb3f5 P2P: Adding option to manage device drivers creating random MAC addresses
Add option 2 to the p2p_device_random_mac_addr configuration option to
support device drivers which use by default random MAC adresses when
creating a new P2P Device interface (for instance, the BCM2711 80211
wireless device driver included in Raspberry Pi 4 Model B). In such
case, this option allows to create the P2P Device interface correctly
when using P2P permanent groups, enabling wpa_supplicant to reuse the
same MAC address when re-invoking a P2P permanent group.

update_config=1 is required.

Signed-off-by: Ircama <amacri@tiscali.it>
2021-02-06 13:40:29 +02:00
Roy Marples
a579642bc3 BSD: If route socket overflows, sync drivers to system interfaces
Messages such as RTM_IFNFO or RTM_IFANNOUNCE could have been lost.
As such, sync the state of our internal driver to the state of the
system interfaces as reports by getifaddrs(2).

This change requires the routing socket be placed in non-blocking
mode. While here, set the routing and inet sockets to close on exec.

BSDs that support SO_RERROR include NetBSD and DragonFly.
There is a review underway to add this to FreeBSD.

Signed-off-by: Roy Marples <roy@marples.name>
2021-02-06 13:27:24 +02:00
Andrei Otcheretianski
ba7542f62d tests: Add mixed SAE/WPA-PSK AP test
Verify WPA-PSK/TKIP connection on SAE configured AP.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 12:09:30 +02:00
Andrei Otcheretianski
fa859ebb19 RSN+WPA: Fix RSNE removing in EAPOL-Key msg 3/4 when RSNXE is included
When the AP advertised RSNE, RSNXE, and WPA IE, hostapd incorrectly
removed the RSNE in the EAPOL-Key msg 3/4 if the STA associates with
WPA, leaving only RSNXE instead of WPA IE. WPA STA fails to connect to
such AP as the WPA IE is missing.

Since RSNXE is not really used in non-RSN connection, just remove it
here with RSNE.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 12:09:30 +02:00
Jouni Malinen
dc19779592 RSN: Validate RSNXE match in EAPOL-Key msg 3/4 only when RSN is used
This is needed to avoid the corner case of local RSNXE aware station
being configured to behave as WPA(v1)-only STA when the AP might not
include RSNXE in EAPOL-Key msg 3/4.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-06 12:09:30 +02:00
Andrei Otcheretianski
5acc20e8f4 tests: Fix sporadic failures in p2p_channel_avoid3
The P2P group may be originally formed on UNII-3, so disabling UNII-1
and UNII-2 will not result in a channel switch failing the test.
Fix this by setting 44 as a preferred channel.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 12:09:30 +02:00
Andrei Otcheretianski
7546a70fbb tests: Fix ap_ft_r0_key_expiration test
The test configures ft_r0_key_lifetime parameter, however ft_params
already contain the r0_key_lifetime. Since both options are accepted by
hostapd and set the same field, one of them gets overwritten.
As the dictionary enumeration order is not guaranteed in python, the
test may sporadically fail.
Fix that by explicitely removing the unneeded parameter.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 12:09:30 +02:00