Commit graph

159 commits

Author SHA1 Message Date
Alex Khouderchah
38b405c8f0 dbus: Expose authentication status to D-Bus
wpa_supplicant currently logs CTRL-EVENT-AUTH-FAILED errors when
authentication fails, but doesn't expose any property to the D-Bus
interface related to this.

This change adds the "AuthStatusCode" property to the interface, which
contains the IEEE 802.11 status code of the last authentication.

Signed-off-by: Alex Khouderchah <akhouderchah@chromium.org>
2019-01-03 00:39:12 +02:00
Matthew Wang
80d06d0ca9 dbus: Export BSS Transition Management status
Add new Interface properties "BSSTMStatus", which carries the status of
the most recent BSS Transition Management request. This property will be
logged in UMA to measure 802.11v success.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-01-03 00:27:01 +02:00
Matthew Wang
2bbad1c7c9 dbus: Export roam time, roam complete, and session length
Add new Interface properties "RoamTime", "RoamComplete", and
"SessionLength". "RoamTime" carries the roam time of the most recent
roam in milliseconds. "RoamComplete" carries True or False corresponding
to the success status of the most recent roam. "SessionLength" carries
the number of milliseconds corresponding to how long the connection to
the last AP was before a roam or disconnect happened.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-01-03 00:20:34 +02:00
Michal Privoznik
1b8ed2cac1 wpa_supplicant: Fix build with !CONFIG_AP and CONFIG_CTRL_IFACE_DBUS_NEW
If the CONFIG_CTRL_IFACE_DBUS_NEW is enabled but CONFIG_AP is
disabled the build fails. This is because dbus getters try to
access ap_iface member of wpa_supplicant struct which is defined
if and only if CONFIG_AP is enabled.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-31 11:41:26 +02:00
Andrej Shadura
c3f23ad6c7 dbus: Expose connected stations on D-Bus
Make it possible to list connected stations in AP mode over D-Bus, along
with some of their properties: rx/tx packets, bytes, capabilities, etc.

Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>

Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use
the new getter API.

Further modified by Andrej Shadura to not error out when not in AP mode
and to send separate StationAdded/StationRemoved signals instead of
changing signatures of existing StaAuthorized/StaDeauthorized signals.

Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-12-23 17:25:11 +02:00
Lubomir Rintel
d7591aab85 dbus: Expose availability of SHA384 on D-Bus
This lets us know whether we can attempt to use FT-EAP-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
eb7e747931 dbus: Expose availability of FT on D-Bus
This lets us know whether we can attempt to use FT-PSK, FT-EAP,
FT-EAP-SHA384, FT-FILS-SHA256 or FT-FILS-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Masashi Honma
e480212765 dbus: Add FILS to global capabilities
If any of the interfaces supports FILS (and similarly for FILS-SK-PFS),
include the "fils" (and "fils_sk_pfs") capability in D-Bus information.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-04-02 11:56:06 +03:00
Saurav Babu
e360010c3a dbus: Add mesh to global capabilities
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2018-04-01 21:52:56 +03:00
Masashi Honma
6240424a76 dbus: Add FILS key mgmt values into BSS security properties
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-12-16 13:14:37 +02:00
Saurav Babu
cdf2501494 dbus: Add new interface property to get mesh group
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
190f6f1176 dbus: Add new interface property to get connected mesh peers
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Nishant Chaprana
9f49474669 dbus: Add method to disable channel switching with a TDLS peer
This patch adds "TDLSCancelChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to disable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Nishant Chaprana
2a57b4b821 dbus: Add method to enable channel switching with a TDLS peer
This patch adds "TDLSChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to enable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Saurav Babu
1939505419 dbus: Add AbortScan method to abort ongoing scan
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-05-07 22:08:43 +03:00
Johannes Berg
a1f11e34c4 Use os_memdup()
This leads to cleaner code overall, and also reduces the size
of the hostapd and wpa_supplicant binaries (in hwsim test build
on x86_64) by about 2.5 and 3.5KiB respectively.

The mechanical conversions all over the code were done with
the following spatch:

    @@
    expression SIZE, SRC;
    expression a;
    @@
    -a = os_malloc(SIZE);
    +a = os_memdup(SRC, SIZE);
    <...
    if (!a) {...}
    ...>
    -os_memcpy(a, SRC, SIZE);

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-07 13:19:10 +02:00
Saurav Babu
d02989f2e4 D-Bus: Notify mesh capability if driver supports it
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-26 12:05:40 +02:00
Saurav Babu
213eb18851 dbus: Set mode to mesh in bss properties when mesh is supported
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-20 22:14:19 +02:00
Jouni Malinen
117875db33 D-Bus: Add GroupMgmt entry into the interface Capabilities dict
This can be used to determine whether the driver supports PMF and if so,
with which group management cipher suites. In addition, add the missing
pairwise and group cipher suite values to the documentation while adding
this new entry there as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:41:20 +02:00
Stijn Tintel
3cdb4ac074 D-Bus: Add pmf to global capabilities
This indicates that the wpa_supplicant binary has been compiled with PMF
support.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:29:22 +02:00
Stijn Tintel
adf8f45f8a D-Bus: Implement Pmf property
The Pmf property is documented in doc/dbus.doxygen, but does not exist,
so implement it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:28:00 +02:00
Jouni Malinen
29065686ac D-Bus: Fix BSS Mode getter for invalid DMG BSS
Previous version could have used uninitialized char* when a DMG with
invalid capabilities were added to BSS table from scan results.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 18:39:24 +02:00
Jouni Malinen
77fcbf7ff1 D-Bus: Use a helper function to get possibly NULL strings
This type of check is used in quite a few getter functions, so add a
helper function to take care of it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-23 21:28:43 +02:00
Jose Blanquicet
b44d9c760f D-Bus: Add ConfigFile parameter into the interface properties
This patch aims to expose the configuration file path as an interface
property, like is done with the driver and the bridge name. Doing so,
higher layer programs become responsible to recreate interfaces with the
correct configuration file path when programs need to remove them.

Signed-off-by: Jose Blanquicet <blanquicet@gmail.com>
2016-08-29 11:43:53 +03:00
Roshan Pius
d015bb05df Move network add/remove operations to a common function
All the 3 control interfaces: socket based, dbus & binder needs to
perform the same sequence of steps for network add/remove. So, move
these to a common utility method in |wpa_supplicant.c| instead of
duplicating the code everywhere.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-18 20:46:18 +03:00
Roshan Pius
5f040be4ff Move disconnect command handling to a common place
Move out the disconnect command handling from |ctrl_iface.c| to
|wpa_supplicant.c| so that it can be reused across the different
control interfaces (socket, dbus & binder).

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-13 21:11:04 +03:00
Jouni Malinen
fc1e2c0d91 D-Bus: Make the CurrentAuthMode property getter more robust
Now that mesh sets wpa_s->wpa_state = WPA_COMPLETED, it looks like this
getter can get called with wpa_s->current_ssid = NULL. That could result
in NULL pointer dereference, so need to protect that specific case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 23:49:08 +03:00
Saurav Babu
e8a1b6b8e9 D-Bus: Check driver capability for IBSS in Modes property of Capabilities
Instead of hardcoding "ad-hoc" in the array of supported capabilities,
add this only if the driver indicates support for IBSS.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-05-13 18:53:04 +03:00
Naveen Singh
c7fb678f31 D-Bus: Add association response status code property for failure cases
(Re)Association Response frame with status code other than 0 is now
notified over DBUS as a part of PropertiesChanged signal. This can be
used by application in case AP is denying association with status code
17 (band steering) so that it does not interfere in the BSSID selection
logic of wpa_supplicant.

Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-06 20:44:51 +02:00
John Ernberg
f91e11f465 D-Bus: Fix p2p interface capability message
If the config file for the interface says "p2p_disabled=1", don't report
p2p capabilities on this interface. This helps programs like Connman to
not enable p2p when it's been disabled in wpa_supplicant.

Signed-off-by: John Ernberg <john.ernberg@actia.se>
2016-02-05 18:09:38 +02:00
Avichal Agarwal
af041f997d dbus: Add support for vendor specific elements
The new methods are
1. VendorElemAdd "i" "ay" i=integer ay=array of bytes
2. VendorElemGet "i" i=integer (output array of bytes)
3. VendorElemRem "i" "ay" i=integer ay=array of bytes

These provide functionality similar to the control interface commands
VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
[VendorElemGet to return array of bytes instead of string; cleanup]
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:13 +02:00
Samuel Tan
07e3653922 dbus: Do not use pointer arithmetic with a void pointer
This failed to compile on x86 gcc due to pointer arithmetic on a void
pointer.

Signed-off-by: Samuel Tan <samueltan@google.com>
2015-11-15 19:34:51 +02:00
Purushottam Kushwaha
2d0fe6bc4e dbus: Add SaveConfig to update configuration file
This is similar to SAVE_CONFIG on control interface, which allow users
to update the configuration file.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-15 19:04:15 +02:00
Purushottam Kushwaha
fb7e7daeff dbus: Fix a copy-paste error in debug print
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-15 18:53:51 +02:00
Dan Williams
e50c50d5a0 dbus: Expose interface globals via D-Bus properties
All interface globals are now exposed as D-Bus properties of type
string, and parsed via the normal interface global parsing functions.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:32 +02:00
Dan Williams
1aa0fb77ea dbus: Pass property description to getters/setters
We'll use it later for global interface properties.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:40:49 +02:00
Ningyuan Wang
c143c3b72a D-Bus: Add a dbus handler for expected disconnection
Add a global D-Bus handler ExpectDisconnect for setting
wpa_s->own_disconnect_req flag. This flag will prevent wpa_supplicant
from adding blacklists and requesting incomplete scan upon the incoming
disconnection. This is mainly meant for a case where suspend/resume is
used and some external component knows about that and can provide the
information to wpa_supplicant before the disconnection happens.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2015-10-12 18:03:11 +03:00
Jouni Malinen
1fbff0b5c4 D-Bus: Set last_scan_req to MANUAL_SCAN_REQ on Scan() trigger paths
The D-Bus Scan() handler was setting wpa_s->scan_req = MANUAL_SCAN_REQ
on the code path that used wpa_supplicant_req_scan(). However, it did
not do anything similar for the cases where
wpa_supplicant_trigger_scan() is called directly. This could result in
unexpected wpa_s->last_scan_req value and incorrect behavior especially
when using ap_scan=2 and running a scan while operating in AP mode. Fix
this by explicitly setting wpa_s->last_scan_req = MANUAL_SCAN_REQ when
using wpa_supplicant_trigger_scan() from the Scan() handler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:44:31 +03:00
Jouni Malinen
c1a14ef42f Do not check unsigned size is less than zero
The variables here are unsigned and as such, cannot have a negative
value. Use == 0 instead of <= 0 to make this cleaner.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 21:16:15 +03:00
MAYANK HAARIT
b649c0afd4 dbus: Add Reconnect command to D-Bus Interface
This has same behavior as the ctrl_iface RECONNECT command.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-14 11:33:54 +03:00
Avraham Stern
a5da657445 dbus: Stop ongoing scheduled scan when scan is requested
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-05-03 17:34:54 +03:00
Jouni Malinen
8a78e227df D-Bus: Fix operations when P2P management interface is used
Commit 21efc940f6 ('wpa_supplicant: Do not
register a P2P management interface on DBus') hides the special P2P
management interface from D-Bus. However, it did not take into account
the possibility of wpa_s->dbus_path and wpa_s->dbus_new_path being NULL
in such cases on number of code paths within the D-Bus handlers. This
could result in invalid arguments (NULL path) being provided to D-Bus
functions (mainly, dbus_message_iter_append_basic) and NULL pointer
dereference when iterating over all interfaces. Either of these could
make wpa_supplicant process terminate.

Fix this by explicitly checking that the interface-specific D-Bus path
has been registered before using it anywhere with D-Bus handlers. In
addition, find the correct wpa_s instance to fix P2P operations through
D-Bus when the P2P Device interface is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:42:25 +03:00
Jouni Malinen
eaa8eefed1 Replace MAX_SSID_LEN with SSID_MAX_LEN
This makes source code more consistent. The use within Android driver
interface is left as-is to avoid changes in the old PNO interface
definition.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Floris Bos
8e2c5f1a20 dbus: Fix WPS property of fi.w1.wpa_supplicant1.BSS interface
The dbus interface documentation says the following about the
WPS property of the fi.w1.wpa_supplicant1.BSS interface:

==
WPS information of the BSS. Empty dictionary indicates no WPS support.
Dictionary entries are:

Type	s	"pbc", "pin", ""
==

However the implementation returns "type" => "" for BSSes
that do not support WPS.

Fix the implementation to match the documentation.
Return empty dictionary if there is no WPS support.
And "type" => "" if WPS is supported, but is not in progress
right now.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
2015-04-13 15:08:46 +03:00
Jouni Malinen
1772d348ea P2P: Fix interface deinit for failed group interface initialization
wpa_supplicant_deinit_iface() ends up removing all P2P groups if the
removed interface is the parent interface. This is correct behavior in
general, but this resulted in issues in the new group interface
initialization error path since wpa_s->parent was not assigned before
hitting this check. Fix this by assigning wpa_s->parent as part of
wpa_supplicant_add_iface().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:53 +02:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
98a4cd447e D-Bus: Clear cached EAP data on network profile changes
This makes D-Bus network profile Set(Properties) clear cached EAP data
similarly to how SET_NETWORK does for control interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 13:24:09 +02:00
Jouni Malinen
a354bcc886 D-Bus: Use NoMemory error message from CreateInterface
Try to be a bit more consistent by using NoMemory instead of InvalidArgs
if os_strdup() fails in the CreateInterface handler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-09 02:32:15 +02:00
Jouni Malinen
a0caebf397 D-Bus: Simplify out-of-memory reporting
There is no need to have separate wpa_printf() and different error
message strings for the unlikely out-of-error messages. Use a helper
function, wpas_dbus_error_no_memory(), to get consistent behavior with a
one-line call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00