Commit graph

122 commits

Author SHA1 Message Date
Masashi Honma
f0356ec85c eloop: Add epoll option for better performance
This patch adds epoll option for the eloop implementation. This can be
selected with the CONFIG_ELOOP_EPOLL=y build option.

[merit]
See Table1.

Table1. comparison table
+--------+--------+-----------+------------+-------------+
|        | add fd | remove fd | prepare fd | dispatch fd |
+--------+--------+-----------+------------+-------------+
| select | O(1)   | O(1)      | O(N)       | O(N)        |
+--------+--------+-----------+------------+-------------+
| poll   | O(1)   | O(1)      | O(N)       | O(N)        |
+--------+--------+-----------+------------+-------------+
| epoll  | O(1)   | O(1)      | 0          | O(M)        |
+--------+--------+-----------+------------+-------------+
"add fd" is addition of fd by eloop_sock_table_add_sock().
"remove fd" is removal of fd by eloop_sock_table_remove_sock().
"prepare fd" is preparation of fds before wait in eloop_run().
"dispatch fd" is dispatchment of fds by eloop_sock_table_dispatch().
"N" is all watching fds.
"M" is fds which could be dispatched after waiting.

As shown in Table1, epoll option has better performance on "prepare fd" column.
Because select/poll option requires setting fds before every select()/poll().
But epoll_wait() doesn't need it.

And epoll option has also better performance on "dispatch fd" column.
Because select/poll option needs to check all registered fds to find out
dispatchable fds. But epoll option doesn't require checking all registered fds.
Because epoll_wait() returns dispatchable fd set.

So epoll option is effective for GO/AP functionality.

[demerit]
The epoll option requires additional heap memory. In case of P2P GO, it is
about 8K bytes.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-05-16 18:25:51 +03:00
Jouni Malinen
c201f93a9e WPS: Enable WSC 2.0 support unconditionally
There is not much point in building devices with WPS 1.0 only supported
nowadays. As such, there is not sufficient justification for maintaining
extra complexity for the CONFIG_WPS2 build option either. Remove this by
enabling WSC 2.0 support unconditionally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Janusz Dziedzic
4db216fcf7 wpa_supplicant: Add support for IPv6 with UDP ctrl_iface
Add IPv6 support when using udp/udp-remote control interface using the
following new build configuration options:

CONFIG_CTRL_IFACE=udp6
CONFIG_CTRL_IFACE=udp6-remote

This is useful for testing, while we don't need to assign IPv4 address
(static or using DHCP) and can just use auto configured IPv6 addresses
(link local, which is based on the MAC address). Also add scope id
support for link local case.

For example,
./wpa_cli
./wpa_cli -i ::1,9877
./wpa_cli -i fe80::203:7fff:fe05:69%wlan0,9877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-02-25 16:43:01 +02:00
Ben Greear
3043b4f455 nl80211: Document how to configure for libnl 2.0 and 3.2
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>

Signed-hostap: Ben Greear <greearb@candelatech.com>
2014-01-07 15:35:14 +02:00
Jouni Malinen
101bdc2e8c Remove forgotten notes about already removed driver wrappers
These old driver wrappers have been removed quite some time ago, but
some of the build configuration notes were still describing how they
are configured.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:23:30 +02:00
Jouni Malinen
70067530b6 Update EAP-FAST note regarding OpenSSL support
This is now supported in the current OpenSSL version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:13:11 +02:00
Jouni Malinen
215a02f359 Add Wi-Fi Direct to the build configuration example
In addition, include Wi-Fi Direct support for Android builds by
default.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 20:49:48 +02:00
Jouni Malinen
e1925bde36 eloop: Remove eloop_none.c
This was supposed to be a minimal sample of eloop wrapper, but it is
unclear whether this is of that much use and the file has not been kept
up-to-date. Remove this file to reduce maintenance effort. The other
eloop*.c files can be used as a starting point if something new is
needed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 16:48:20 +02:00
Jouni Malinen
65015b2d8e Replace unnecessary UTF-8 characters with ASCII versions
There is no need for using UTF-8 in these files when perfectly fine
ASCII versions of these characters exist.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 16:01:32 +02:00
Eliad Peller
f2112b2ac8 wpa_supplicant: Add CONFIG_IEEE80211AC
In order to support P2P GO with 11ac support, add CONFIG_IEEE80211AC
config option support to the Makefile.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:32:03 +02:00
Jouni Malinen
7e7610d788 EAP-EKE: Add peer implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Jouni Malinen
abfc3ad9af Synchronize build config comments for wpa_supplicant
This updates number of comments in android.config to match the latest
version in defconfig and adds some of the entries that were previously
present only in android.config into defconfig.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 20:19:50 +03:00
Johannes Berg
e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Janusz Dziedzic
afadf423db wpa_supplicant: Add optional remote access for ctrl_iface
Add new option for ctrl iface: CONFIG_CTRL_IFACE=udp-remote. This
enables remote access to control interface via UDP port(s). This should
be used for testing purpose only since there is no authentication or
access control on the commands.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:01:07 +03:00
Jouni Malinen
306ae22556 EXT PW: Add framework for supporting external password storage
This new mechanism can be used to make wpa_supplicant using external
storage (e.g., key store in the operating system) for passwords,
passphrases, and PSKs. This commit is only adding the framework part
needed to support this, i.e., no actual configuration parameter can
yet use this new mechanism. In addition, only a simple test backend
is added to allow developer testing of the functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
51ca03f470 WPS: Document NFC use cases with password/config token
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:28:49 +03:00
Tomasz Bursztyka
e3659c89d2 Add a simple periodic autoscan module
This module will sets a fixed scanning interval. Thus, the parameter to
this module is following this format: <fixed interval>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:28:21 +03:00
Tomasz Bursztyka
c0fba2b38d Add autoscan module named exponential
This module will compute the interval on a base exponential. Thus,
params to this module are following this format: <base>:<limit>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:22:56 +03:00
Tomasz Bursztyka
7c865c6853 Add automatic scanning support
Like bgscan, autoscan is an optional module based feature to automate
scanning but while disconnected or inactive.

Instead of requesting directly a scan, it only sets the scan_interval
and the sched_scan_interval. So, if the driver supports sched_scan,
autoscan will be able to tweak its interval. Otherwise, the tweaked
scan_interval will be used. If scan parameters needs to be tweaked, an
autoscan_params pointer in wpa_s will provide those. So req_scan /
req_sched_scan will not set the scan parameters as they usually do, but
instead will use this pointer.

Modules will not have to request a scan directly, like bgscan does.
Instead, it will need to return the interval it wants after each
notification.

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:55:41 +03:00
Jouni Malinen
ef3e60bf22 Describe CONFIG_AP=y and CONFIG_P2P=y in defconfig
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-24 01:07:15 +03:00
Jouni Malinen
b6668734ab WNM: Add advertisement of BSS max idle period
If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period
information to the (Re)Association Response frame from the AP and parse
this information on the station. For SME-in-wpa_supplicant case, add a
timer to handle periodic transmission of the keep-alive frame. The
actual request for the driver to transmit a frame is not yet
implemented.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-27 17:35:00 -07:00
Jay Katabathuni
25471fe3b9 HS 2.0: Add Hotspot 2.0 ANQP routines
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:40 +03:00
Jouni Malinen
4732ee3a87 Add more documentation for IEEE 802.11w/PMF configuration
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 16:48:23 +03:00
Angie Chinchilla
540609c55f Clarify comment in wpa_supplicant/defconfig
I think this comment, as originally stated, says the opposite of
what is meant. Reword to help the next guy.

Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
2012-04-06 18:07:44 +03:00
Johannes Berg
4f68895e92 debug: Add option to log to Linux tracing
Add the option (-T) to wpa_supplicant to log all debug messages into the
kernel tracing, allowing to aggregate kernel debugging with
wpa_supplicant debugging and recording all with trace-cmd.

Since tracing has relatively low overhead and can be filtered
afterwards, record all messages regardless of log level. However, it
will honor the -K option and not record key material by default.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-03-31 13:55:33 +03:00
Ben Greear
2df4c4ef2f eloop: Support poll() in eloop
When using more than around 200 virtual stations, we start hitting the
max number of file descriptors supported by select(). This patch adds
support for poll(), which has no hard upper limit.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-02-12 21:12:22 +02:00
Dan Harkins
27c9d333d4 EAP-pwd: Describe build option for EAP-pwd
Signed-hostap: Dan Harkins <dharkins@lounge.org>
2012-02-11 12:17:58 +02:00
Ben Greear
80e8a5eef1 Support HT capability overrides
This allows HT capabilities overrides on kernels that
support these features.

MCS Rates can be disabled to force to slower speeds when using HT.
Rates cannot be forced higher.

HT can be disabled, forcing an 802.11a/b/g/n station to act like
an 802.11a/b/g station.

HT40 can be disabled.

MAX A-MSDU can be disabled.
A-MPDU Factor and A-MPDU Density can be modified.

Please note that these are suggestions to the kernel. Only mac80211
drivers will work at all. The A-MPDU Factor can only be decreased and
the A-MPDU Density can only be increased currently.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 21:01:31 +02:00
Jouni Malinen
ca84eed7ad TLS: Add build configuration for TLS v1.2 support
This allows the internal TLS implementation to be built for TLS v1.2
support. In addition to the build option, this changes the TLS PRF
based on the negotiated version number. Though, this commit does not
yet complete support for TLS v1.2.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:45:07 +02:00
Jouni Malinen
17fbb751e1 Remove user space client MLME
This code was used only with driver_test.c to allow MLME operations
in hostapd to be tested without having to use a real radio. There
are no plans on extending this to any other use than testing and
mac80211_hwsim has now obsoled the need for this type of testing.
As such, we can drop this code from wpa_supplicant to clean up the
implementation of unnecessary complexity.
2011-10-22 22:45:38 +03:00
Andrii Bordunov
745e8aba69 Add CONFIG_WPS_REG_DISABLE_OPEN to defconfig 2011-10-22 22:24:34 +03:00
Jouni Malinen
46ee0427b1 IEEE 802.11u: Allow Interworking and HESSID to be configured
The new wpa_supplicant.conf file global parameters interworking and
hessid can be used to configure wpa_supplicant to include
Interworking element in Probe Request frames.
2011-10-16 23:55:34 +03:00
Jouni Malinen
fd2f2d0489 Remove EAP-TTLSv1 and TLS/IA
These protocols seem to be abandoned: latest IETF drafts have expired
years ago and it does not seem likely that EAP-TTLSv1 would be
deployed. The implementation in hostapd/wpa_supplicant was not complete
and not fully tested. In addition, the TLS/IA functionality was only
available when GnuTLS was used. Since GnuTLS removed this functionality
in 3.0.0, there is no available TLS/IA implementation in the latest
version of any supported TLS library.

Remove the EAP-TTLSv1 and TLS/IA implementation to clean up unwanted
complexity from hostapd and wpa_supplicant. In addition, this removes
any potential use of the GnuTLS extra library.
2011-09-25 21:28:32 +03:00
Jouni Malinen
5c47af9a7a TLS: Add support for TLS v1.1 (RFC 4346) with internal TLS
This is disabled by defautl and can be enabled with CONFIG_TLSV11=y
build configuration parameter.
2011-09-25 17:24:46 +03:00
Jouni Malinen
03948f423f Add CONFIG_IEEE80211N to wpa_supplicant defconfig
This is needed for AP mode functionality with some drivers.
2011-07-18 21:34:25 +03:00
Jouni Malinen
4aced422d3 Add notes for CONFIG_WPS_ER build configuration option
[Bug 407]
2011-06-23 19:30:13 +03:00
Jouni Malinen
38e24575c1 random: Add support for maintaining internal entropy store over restarts
This can be used to avoid rejection of first two 4-way handshakes every
time hostapd (or wpa_supplicant in AP/IBSS mode) is restarted. A new
command line parameter, -e, can now be used to specify an entropy file
that will be used to maintain the needed state.
2011-05-31 20:07:11 +03:00
Jouni Malinen
0725cc7b7e Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux kernel
version.
2011-04-21 20:41:01 +03:00
Jouni Malinen
fe885594ac Document CONFIG_DEBUG_SYSLOG and CONFIG_DEBUG_SYSLOG_FACILITY 2011-03-20 11:49:41 +02:00
Jouni Malinen
bbb921daaa Maintain internal entropy pool for augmenting random number generation
By default, make hostapd and wpa_supplicant maintain an internal
entropy pool that is fed with following information:

hostapd:
- Probe Request frames (timing, RSSI)
- Association events (timing)
- SNonce from Supplicants

wpa_supplicant:
- Scan results (timing, signal/noise)
- Association events (timing)

The internal pool is used to augment the random numbers generated
with the OS mechanism (os_get_random()). While the internal
implementation is not expected to be very strong due to limited
amount of generic (non-platform specific) information to feed the
pool, this may strengthen key derivation on some devices that are
not configured to provide strong random numbers through
os_get_random() (e.g., /dev/urandom on Linux/BSD).

This new mechanism is not supposed to replace proper OS provided
random number generation mechanism. The OS mechanism needs to be
initialized properly (e.g., hw random number generator,
maintaining entropy pool over reboots, etc.) for any of the
security assumptions to hold.

If the os_get_random() is known to provide strong ramdom data (e.g., on
Linux/BSD, the board in question is known to have reliable source of
random data from /dev/urandom), the internal hostapd random pool can be
disabled. This will save some in binary size and CPU use. However, this
should only be considered for builds that are known to be used on
devices that meet the requirements described above. The internal pool
is disabled by adding CONFIG_NO_RANDOM_POOL=y to the .config file.
2010-11-24 01:29:40 +02:00
Jouni Malinen
aee680e8b2 wpa_cli: Add internal line edit implementation
CONFIG_WPA_CLI_EDIT=y can now be used to build wpa_cli with internal
implementation of line editing and history support. This can be used
as a replacement for CONFIG_READLINE=y.
2010-11-14 19:15:23 +02:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Masashi Honma
60da5e0f3f Solaris: Add support for wired IEEE 802.1X client
This patch adds support for wired IEEE 802.1X client on the Solaris.

I have tested with these:
OS : OpenSolaris 2009.06
EAP : EAP-MD5
Switch : Cisco Catalyst 2950
2010-08-28 11:40:07 +03:00
Masashi Honma
953f0f6333 bsd: Add support for WPA_TRACE and WPA_TRACE_BFD
On FreeBSD 8.0, WPA_TRACE and WPA_TRACE_BFD functionality build fails.
2010-01-09 11:01:12 +02:00
Jouni Malinen
ce4f7fdbdd dbus: Get rid of libxml2 dependency with introspection
The XML used in D-Bus introspection is simple and there is no need to use
libxml2 to generate it. This gets rid of the dependency on the large
library by using internal XML generation.
2010-01-01 17:51:15 +02:00
Jouni Malinen
34359a3fb1 Include BSS table unconditionally in the wpa_supplicant build
This will allow more cleanup to be done for scan results processing
since all code can now be made to depend on the BSS table instead of
the temporary scan results.

Once remaining code has been converted to use the BSS table, the new
scan results can be freed immediately after the BSS table has been
updated. In addition, filtering of BSS information should be added
to better support systems with limited resources. For now, memory
use can be limited by defining WPA_BSS_MAX_COUNT to be smaller.
Anyway, better filtering of results to only the configured networks
should be added to improve this.
2009-12-28 01:14:56 +02:00
Jouni Malinen
83922c2d34 Add BSS table to track scan results without dropping information
Collect information from scan results into a BSS table that will not
expire information as quickly as scan results where every new scan,
no matter for how limited set of channels/SSIDs, clears all old
information.

For now, this is only used for D-Bus BSS added/removed notifications,
but this will likely be extended to be used internally instead of the
scan results to better support partial scans.
2009-12-27 21:07:47 +02:00
Jouni Malinen
96603e4fe1 Comment CONFIG_WPA_TRACE_BFD=y out by default 2009-12-23 23:20:11 +02:00
Jouni Malinen
b22b41ee87 Describe tracing build options for developers 2009-12-20 23:41:06 +02:00
Jouni Malinen
50b5bf4eda Remove obsolete Prism54.org driver support (driver_prism54.c)
The Prism54.org project seems have been dead for a while and it does not
look like this driver would ever be maintained again. Furthermore, it is
difficult to find a version that would work with the driver_prism54.c
wrapper and there is another driver for these card in the Linux kernel
tree.

The hostapd integration in driver_prism54.c is quite different from the
other driver wrappers and would require major effort to get it cleaned
up. Since there does not seem to be any real users for the cleaned up
version, there does not seem to be justification to spend this effort on
the wrapper. This old code is making it much more difficult to clean up
the driver interface and at this point, the best option seems to be to
remove the driver wrappers. Should someone really still need this, the
old code will continue to be available in hostapd 0.6.x.
2009-12-12 20:52:12 +02:00
Jouni Malinen
e90bba4c59 Add cleared deprecation notes on iwl,ndiswrapper,madwifi(sta) wrappers
These driver wrappers should not be used anymore; WEXT should be used
instead. However, there may still be users stuck on older kernel versions
that may require driver specific wrappers, so the source code still
remains in the repository.
2009-11-23 17:08:59 +02:00
Jouni Malinen
a3c6598fcd Add 'none' driver as an option for wpa_supplicant
This can be used, e.g., with WPS ER when no network interface is
actually used for IEEE 802.1X or wireless operations.
2009-11-20 21:12:49 +02:00
Witold Sowa
8fc2fb56e4 wpa_supplicant: new DBus API implementation
This patch implements the new DBus API. Both, the new and the
previous API may work concurrently and may be turned on or off
separately in .config file.
Some features of the new API are:
 - more wpa_supplicant's events are signaled with DBus signals,
 - introspection data (requires libxml2 and may be disabled),
 - CurrentBSS and CurrentNetwork properties,
 - PropertyChanged signal for most of properties,
 - Relatively easy to extend.
.config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and
CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection.

This commit misses couple of parts from the full implementation
(these are still under review):
- fetching all configuration parameters for learning WPS information
- scan result BSS add/remove notification (register_bss() and
  unregister_bss() notification callbacks)
2009-11-09 23:51:59 +02:00
Jouni Malinen
bd4e9d033b Replace CONFIG_NO_AES_EXTRAS with auto-detection during build
There is no need to do this manually since it is possible to figure
out automatically which AES extra files need to be included in the
build.
2009-10-11 22:23:50 +03:00
Jouni Malinen
c9d2ffbc4c Document CONFIG_CLIENT_MLME option as specific to test driver
Since user space MLME is not used with nl80211 anymore, this option is
only of use with driver_test.
2009-03-20 22:35:19 +02:00
Jouni Malinen
421b4ba50a Add CONFIG_DRIVER_NL80211 and clarify client MLME limitations
This is based on a patch from Pavel Roskin <proski@gnu.org>, but with
the WIRELESS_DEV part removed instead of moved since it does not apply
anymore. Additional note on client MLME limitations was also added.
2009-02-04 21:48:05 +02:00
Pavel Roskin
e7e9c46e55 Use better examples for MadWifi path in defconfig, clarify comments
MadWifi is unlikely to be in ../head relative to hostapd or
wpa_supplicant, as it would be inside the hostap git repository.
MadWifi sources are more likely to be in a directory called "madwifi"
and residing outside the hostap repository.  Using "madwifi" also
demonstrates that the top-level madwifi directory is needed.
2009-02-04 21:45:14 +02:00
Jouni Malinen
1c5aeef0c2 Add comments on the new Broadcom driver not using driver_broadcom.c
The newer Broadcom driver ("hybrid Linux driver") supports Linux
wireless extensions and does not need (or even work) with the old
driver wrapper.
2009-01-30 21:34:40 +02:00
Jouni Malinen
a9d1364c5f Merged EAP-AKA' into eap_aka.c and added it to defconfig/ChangeLog 2008-12-07 19:24:56 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouke Witteveen
e519314ee9 Add RoboSwitch driver interface for wpa_supplicant
Find attached the patch that creates a new driver: roboswitch. This
driver adds support for wired authentication with a Broadcom
RoboSwitch chipset. For example it is now possible to do wired
authentication with a Linksys WRT54G router running OpenWRT.

LIMITATIONS
- At the moment the driver does not support the BCM5365 series (though
adding it requires just some register tweaks).
- The driver is also limited to Linux (this is a far more technical
restriction).
- In order to compile against a 2.4 series you need to edit
include/linux/mii.h and change all references to "u16" in "__u16". I
have submitted a patch upstream that will fix this in a future version
of the 2.4 kernel. [These modifications (and more) are now included in
the kernel source and can be found in versions 2.4.37-rc2 and up.]

USAGE
- Usage is similar to the wired driver. Choose the interfacename of
the vlan that contains your desired authentication port on the router.
This name must be formatted as <interface>.<vlan>, which is the
default on all systems I know.
2008-11-18 16:30:32 +02:00
Jouni Malinen
cd35db9fef Updated userspace MLME instructions for current mac80211
Remove the old code from driver_wext.c since the private ioctl interface is
never going to be used with mac80211. driver_nl80211.c has an
implementation than can be used with mac80211 (with two external patches to
enable userspace MLME configuration are still required, though).
2008-11-18 15:45:25 +02:00
Jouni Malinen
46690a3b9b Added an optional mitigation mechanism for certain attacks against TKIP by
delaying Michael MIC error reports by a random amount of time between 0 and
60 seconds if multiple Michael MIC failures are detected with the same PTK
(i.e., the Authenticator does not rekey PTK on first failure report). This
is disabled by default and can be enabled with a build option
CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config.

This may help in making a chopchop attack take much longer time by forcing
the attacker to wait 60 seconds before knowing whether a modified frame
resulted in a MIC failure.
2008-11-08 04:43:12 +02:00
Jouni Malinen
2a24bb3199 Added Milenage USIM emulator for EAP-AKA (can be used to simulate test
USIM card with a known private key; enable with CONFIG_USIM_SIMULATOR in
.config and password="Ki:OPc:SQN" in network configuration).
2008-11-05 23:02:13 +02:00
Jouni Malinen
c1e033b0bb IEEE Std 802.11r-2008 has been released, so update references 2008-08-15 11:25:24 +03:00
Jouni Malinen
187bc466a3 Removed the 20% estimate on faster bignum routines
This was not accurate since this was mostly based on total runtime of an
eapol_test run. The real improvement in the bignum routines is much larger
(mayby twice as fast as before).
2008-06-06 10:30:43 +03:00
Jouni Malinen
b95394c66f Combined internal LibTomMath configuration into one option
CONFIG_INTERNAL_LIBTOMMATH_FAST=y in .config can now be used to enable all
optimized routines at a cost of about 4 kB. This is small enough increase
in size to justify simplified configuration.
2008-06-06 10:21:28 +03:00
Jouni Malinen
ec0205a87a Added an option to build internal LibTomMath with faster div routine
At the cost of about 1 kB of additional binary size, the internal
LibTomMath can be configured to include faster div routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_DIV=y in
.config.
2008-06-06 10:11:17 +03:00
Jouni Malinen
c5f5c91aeb Add faster, optional sqr routine for internal LibTomMath
At the cost of about 0.5 kB of additional binary size, the internal
LibTomMath can be configured to include faster sqr routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_SQR=y in
.config.
2008-06-05 18:33:46 +03:00
Jouni Malinen
8ccc0402b2 Internal LibTomMath: add optional support for Montgomery reduction
Add a cost of about 2.5 kB of additional cost, the internal LibTomMath can
be configured to include fast exptmod routine to speed up DH and RSA.
This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_EXPTMOD=y in
.config.
2008-06-04 11:57:55 +03:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00