Commit graph

69 commits

Author SHA1 Message Date
Jouni Malinen
0531006644 driver_wired: Move STA entry processing away from driver wrapper
Get rid of hostapd/sta_info.h dependency by introducing a new driver
callback function for hostapd.
2009-12-12 20:39:25 +02:00
Jouni Malinen
9008a3e44d Merge get_seqnum_igtk() driver op with get_seqnum()
IEEE 802.11w uses distinct key indexes (4 and 5) so the same
get_seqnum() handler can be used to fetch packet number for both
TKIP/CCMP and BIP(using IGTK).

Since the new get_seqnum_igtk() handler was not actually implemented by
any driver wrapper, this may also fix BIP/IGTK sequence number reporting
with driver_nl80211.c.
2009-12-11 00:15:54 +02:00
Jouni Malinen
90b8c4c5f8 Add Doxygen comments for rest of struct wpa_driver_ops members
All members have now at least minimal documentation.
2009-12-10 21:11:33 +02:00
Jouni Malinen
6fe8296197 Move vendor-specific IE type defines away from driver.h
These are generic IEEE 802.11 defines and do not really need to be in
the driver interface specific header file.
2009-12-10 12:27:46 +02:00
Jouni Malinen
15333707d5 Add more documentation for driver ops 2009-12-10 01:21:01 +02:00
Jouni Malinen
3484a18a13 hostapd: Remove unused bridge_packets configuration option
There was code for configuring this, but no driver wrapper actually
implements the actual setting. Remove this for now to reduce potential
confusion and to simply the driver interface.
2009-12-09 22:06:43 +02:00
Jouni Malinen
fb7842aa51 Remove struct hostapd_rate_data from driver API
In addition to the bitrate, the only other variable in this structure
is used internally in hostapd. Move this structure into hostapd.h and
make the driver API use simpler data structure (array of bitrates).
2009-12-09 21:57:50 +02:00
Jouni Malinen
217e7eeaf0 Remove unused rate flags from driver use
These are not really used and can be removed to clean up the driver
interface definition. The only remaining flag (HOSTAPD_RATE_BASIC) can
be removed once the basic rate set indication can be handled
differently.
2009-12-09 21:38:14 +02:00
Jouni Malinen
22a7c9d735 Merge bss_add/bss_remove drivers ops into if_add/if_remove
if_add/if_remove can now be used as the generic driver ops for adding
and removing virtual interfaces of various types. In addition,
driver_nl80211.c is now including this code unconditionally, so that
the functions are not limited only for hostapd.
2009-12-09 16:49:28 +02:00
Jouni Malinen
b5996353e7 Remove unused if_update() driver op 2009-12-09 15:47:20 +02:00
Jouni Malinen
644a8f2208 Remove unused phytype RX info variable 2009-12-06 18:54:58 +02:00
Jouni Malinen
e6b8efeba0 nl80211: Add debug prints for BSS status in scan results
Print what the kernel believes the current BSS status (authenticated
or associated) is in scan results. In addition, check whether this
matches with the state that wpa_supplicant believes the driver to be
in.

This does not change the actual behavior, but will provide information
that will help in debugging potential issues where cfg80211/mac80211
seems to get into a different state from wpa_supplicant. In addition,
this provides an easy location for a workaround that could be added to
clear cfg80211/mac80211 state for unknown BSSes.
2009-12-02 16:45:31 +02:00
Jouni Malinen
0c3abf8d22 Add driver wrapper callback for WPS push button pressed
This avoids the need to include ../hostapd/wps_hostapd.h into the
driver wrappers.
2009-11-29 18:18:02 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
fc4e2d9501 HT: Remove unneeded struct ht_cap_ie wrapper
It is simpler to just use the HT Capabilities IE payload structure
as-is.
2009-11-29 13:04:21 +02:00
Jouni Malinen
be8eb8ab3e Fix AP mode HT Capabilities IE to use A-MPDU Parameters from the driver
Instead of using hardcoded maximum A-MPDU length of 64 kB and no
restrictions on minimum MPDU Start Spacing, use the correct values
reported by the driver.
2009-11-29 12:21:26 +02:00
Jouni Malinen
ec8d20187d Remove obsoleted get_scan_results() driver_ops
This has now been replaced with get_scan_results2() in every
in-tree driver.
2009-11-23 21:33:37 +02:00
Jouni Malinen
c2e8d0a092 Remove deprecated scan and set_probe_req_ie driver_ops
These have been replaced with scan2 driver_ops that provides all
parameters in a single call.
2009-11-23 21:13:46 +02:00
Jouni Malinen
4a867032ae Remove deprecated driver_ops handlers
This gets rid of previously deprecated driver_ops handlers set_wpa,
set_drop_unencrypted, set_auth_alg, set_mode. The same functionality
can be achieved by using the init/deinit/associate handlers.
2009-11-23 20:22:38 +02:00
Jouni Malinen
642187d6bf Merge set_key and hapd_set_key driver_ops into a single function 2009-11-23 16:58:32 +02:00
Jouni Malinen
5d67487244 Merge set_beacon driver_ops into a single one
Clean up driver interface by merging hostapd and wpa_supplicant
specific set_beacon driver_ops into a single one. In addition,
merge set_beacon_int into to the same operation.
2009-11-23 15:26:05 +02:00
Jouni Malinen
62fa124ce2 nl80211/SME: Use reassociation when roaming within the ESS 2009-11-17 19:25:05 +02:00
Jouni Malinen
08eb154db5 Fix MCS set field to be based on driver info
Instead of using hardcoded Rx MCS bitmask (indexes 0..15 enabled),
use the real information from the driver capabilities.
2009-11-05 12:38:47 +02:00
Jouni Malinen
b3ad11bb80 nl80211: Add parsing of NL80211_BSS_SEEN_MS_AGO into scan results 2009-10-01 17:53:22 +03:00
Johannes Berg
0194fedb46 driver_nl80211: Fix MLME key settings for static WEP
Current wpa_supplicant has a bug with WEP keys, it adds a zero-length
sequence counter field to netlink which the kernel doesn't accept.

Additionally, the kernel API slightly changed to accept keys only when
connected, so we need to send it the keys after that. For that to work
with shared key authentication, we also include the default WEP TX key
in the authentication command.

To upload the keys properly _after_ associating, add a new flag
WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE indicating that the driver
needs the keys at that point and not earlier.
2009-09-15 10:48:30 +03:00
Jouni Malinen
3fed6f2504 Replace hostapd_wps_probe_req_rx() with more generic ProbeReq notifier
The driver wrappers should not need to include wps_hostapd.h, so let's
make this easier by introducing a driver callback for reporting Probe
Request frames.
2009-06-12 17:31:43 +03:00
Jouni Malinen
da1fb17ca7 Add handling of SME auth/assoc timeout events
This allows wpa_supplicant to start searching for other APs (or re-try)
if the MLME times out.
2009-04-24 00:08:24 +03:00
Jouni Malinen
1fb1a6f0bf Remove unused set_broadcast_ssid() driver op
None of the driver wrappers user this. hostapd-controlled broadcast SSID
hiding can only be used with drivers that use hostapd for handling
Beacon and Probe Request/Response frames.
2009-04-22 16:15:24 +03:00
Jouni Malinen
9351257cfb Remove the unused set_ieee80211d driver op
None of the driver wrappers use this. Only the drivers that use hostapd
for Beacon and Probe Request/Response handling can now use IEEE 802.11d
properly.
2009-04-22 16:11:22 +03:00
Jouni Malinen
4bc181ecc7 Add new wpa_supplicant driver op for setting 802.1X port status
This can be used with drivers that implement PAE to control whether
normal data frames (non-EAPOL) are allowed.
2009-04-22 16:01:37 +03:00
Jouni Malinen
30985b8600 Remove unused set_retry() driver op 2009-04-21 18:01:43 +03:00
Jouni Malinen
61693eaa80 hostapd: Remove unused passive scan functionality
This was not really supported by any of the included driver wrappers. If
this functionality is desired in the future, this (or something similar)
can be added with the changes needed into a driver wrapper to use the
mechanism.
2009-04-17 15:47:37 +03:00
Jouni Malinen
4b9841d34c Move more multi-BSSID processing into drv_callbacks.c
This simplifies driver wrapper operations and removes last direct
struct hostapd_data dereferences from driver_nl80211.c. In addition,
some of the TX callbacks are now fixed for secondary BSSes.
2009-04-17 13:29:29 +03:00
Jouni Malinen
412036f5f0 Provide own_addr buffer in hapd_init() parameters
This reduces number of places in driver wrapper that would need to
dereference struct hostapd_data pointer directly.
2009-04-17 11:55:51 +03:00
Jouni Malinen
731723a5bd Add own_addr as a parameter to sta_deauth() and sta_disassoc()
This fixes deauth/disassoc frames in secondary BSSes when using
multi-BSSID. In addition, it reduces need to dereference
struct hostapd_data inside driver wrappers.
2009-04-17 11:37:22 +03:00
Jouni Malinen
b8c4d6df5f Remove dead code related to WDS setup
hostapd does not have any code that would actually call this, so there
is no current need to try to figure out how to set up WDS links with
nl80211.
2009-04-16 19:08:58 +03:00
Jouni Malinen
ad1e68e6b5 Clean up HT40 scan and share nl80211 scanning code
Instead of adding a new driver_ops for fetching neighbor BSS data (that
nl80211 driver interface had to scan during initialization), share the
same scan operations that wpa_supplicant is using. This gets rid of
duplicated scan code in driver_nl80211.c (and better yet, removes large
part of old WEXT code).

hostapd interface initialization is now completed in a callback, if
needed, i.e., he_features channel/hw_mode selection can use as much time
as needed. This can also help with radar detection in the future.
2009-04-16 16:22:40 +03:00
Jouni Malinen
b4fd6fab5b Share driver beacon configuration handlers 2009-04-09 23:44:39 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
e785c2ba3b Share same set_country driver op for hostapd and wpa_supplicant 2009-04-09 20:01:25 +03:00
Jouni Malinen
9f324b61ba Share management frame send driver op for hostapd and wpa_supplicant
The same implementation can be shared in most cases, so better share the
same driver_ops handler function.
2009-04-09 19:57:20 +03:00
Jouni Malinen
8342130269 Remove flags parameter from send_mgmt_frame() driver op
This was not documented properly and was not really used nor would it be
suitable to be used in generic way as it was implemented. It is better
to just remove the parameter since there does not seem to be any
reasonable use for it.
2009-04-09 19:42:19 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
a0b2f99bd7 nl80211: Fix static WEP key configuration when using SME
Need to set WEP keys before requesting authentication in order to get
Shared Key authentication working. Previously, the WEP keys were not set
at all when using SME in wpa_supplicant.
2009-04-04 16:58:16 +03:00
Jouni Malinen
6caf9ca68c Share same hw_feature definitions between hostapd and wpa_supplicant 2009-04-03 19:04:20 +03:00
Jouni Malinen
6179d2fd7d Fix driver_ops function documentation 2009-04-03 16:35:46 +03:00
Jouni Malinen
d2440ba01b Add Beacon configuration for wpa_supplicant AP mode 2009-04-02 16:09:48 +03:00
Jouni Malinen
efa4607800 SME: Add processing for rejected associations 2009-04-01 17:10:36 +03:00
Jouni Malinen
d3a9822542 Add support for specifying subset of enabled frequencies to scan
A new network block parameter, scan_freq, can be used to specify subset
of frequencies to scan. This can speed up scanning process considerably
if it is known that only a small subset of channels is actually used in
the network. A union of configured frequencies for all enabled network
blocks is used in scan requests.

Currently, only driver_nl80211.c has support for this functionality.

For example, following parameter marks 2.4 GHz channels 1, 6, 11 to be
scanned: scan_freq=2412 2437 2462
2009-03-26 21:55:01 +02:00