Commit graph

332 commits

Author SHA1 Message Date
Jouni Malinen
b4fd6fab5b Share driver beacon configuration handlers 2009-04-09 23:44:39 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
e785c2ba3b Share same set_country driver op for hostapd and wpa_supplicant 2009-04-09 20:01:25 +03:00
Jouni Malinen
9f324b61ba Share management frame send driver op for hostapd and wpa_supplicant
The same implementation can be shared in most cases, so better share the
same driver_ops handler function.
2009-04-09 19:57:20 +03:00
Jouni Malinen
8342130269 Remove flags parameter from send_mgmt_frame() driver op
This was not documented properly and was not really used nor would it be
suitable to be used in generic way as it was implemented. It is better
to just remove the parameter since there does not seem to be any
reasonable use for it.
2009-04-09 19:42:19 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
acae30ed7b nl80211: Add bridge interfaces from secondary BSSes to ifidx list
This fixes EAPOL RX for secondary BSSes that are in a bridge that does
not match with the bridge used for the primary BSS.
2009-04-03 21:17:23 +03:00
Jouni Malinen
f82ef4d8db nl80211: Fix EAPOL frame RX for secondary BSSes
Need to figure out which BSS should process the frame based on the
source address (STA/Supplicant MAC address).
2009-04-03 21:04:25 +03:00
Jouni Malinen
6143f11705 nl80211: Remove dead code
The EAPOL packet socket is not bound to a specific ifindex, so no need
to setup the address for a bind() call that is not here anyway.
2009-04-03 20:55:19 +03:00
Jouni Malinen
c043aadc40 nl80211: Remove unuset set_privacy() and set_internal_bridge() 2009-04-03 20:44:03 +03:00
Jouni Malinen
515cf93f8c Mark STA authorized if IEEE 802.1X and WPA is not used
This fixes multi-BSS configuration with driver_nl80211.c to mark STAs
that use secondary BSSes with open/static WEP without having to make
driver_nl80211.c track 802.1X configuration for each BSS.
2009-04-03 20:40:07 +03:00
Jouni Malinen
c213cc0433 Fix some multi-BSSID configuration operations
Static WEP keys were configured only for the first BSS. In addition,
STAs were flushed only for the first BSS. These operations should be in
hostapd_setup_bss(), not setup_interface().

Remove extra call to ieee802_11_set_beacon() for the first BSS. This
should only be done from hostapd_setup_bss(), i.e., once for each BSS.
2009-04-03 20:14:39 +03:00
Jouni Malinen
6caf9ca68c Share same hw_feature definitions between hostapd and wpa_supplicant 2009-04-03 19:04:20 +03:00
Jouni Malinen
6de726abb5 Remove unused driver_ops
get_rts, get_frag, get_retry, and set_key_tx_rx_threshold were not used
anywhere, so get rid of them.
2009-04-03 11:59:08 +03:00
Jouni Malinen
a9a2cb5abb Merge wireless_event_{,de}init() into {,de}init() driver op 2009-04-03 11:51:40 +03:00
Jouni Malinen
0915d02c3c wpa_supplicant AP: Add management frame RX for nl80211 2009-04-02 21:59:14 +03:00
Jouni Malinen
f1f54cb8b1 Fix RSN parameter setting for multi-BSS case
rsn_pairwise and wpa_group were set properly only for the last BSS, but
they do need to be set for all BSSes.
2009-04-02 19:54:13 +03:00
Jouni Malinen
74f2ad326f Merge set_dtim_period() into set_beacon()
No need for a separate driver_ops handler for setting DTIM period since
this is always set at the same time with the Beacon data. Beacon
interval is still set separately since it is consider per-radio
parameter (Beacon data and DTIM period are per-BSS parameters).
2009-04-02 16:05:21 +03:00
Jouni Malinen
c0a6190815 Fix SHA-256-based KDF when using CCMP as the pairwise cipher
IEEE 802.11r KDF uses key length in the derivation and as such, the PTK
length must be specified correctly. The previous version was deriving
using 512-bit PTK regardless of the negotiated cipher suite; this works
for TKIP, but not for CCMP. Update the code to use proper PTK length
based on the pairwise cipher.

This fixed PTK derivation for both IEEE 802.11r and IEEE 802.11w (when
using AKMP that specifies SHA-256-based key derivation). The fixed
version does not interoperate with the previous versions. [Bug 307]
2009-04-01 12:04:36 +03:00
Jouni Malinen
6ce4b59342 WPS: Fix hostapd runtime WPS configuration after Enrollee run
If the AP is configured with WPS, we need to update the local WPS data
in order to provide correct credentials for Enrollees.
2009-03-30 18:48:41 +03:00
Jouni Malinen
9c6d8e1db5 Make channel number available to set_freq()
Since we have the channel number, we could as well pass it to the driver
wrapper should there be drivers that use channel number instead of
frequency.
2009-03-30 17:55:37 +03:00
Jouni Malinen
0f2b2c1973 Add needed AP driver wrappers (most of which are still to-do) 2009-03-27 17:13:54 +02:00
Jouni Malinen
c813b69546 Update driver SSID and 802.1X/WPA parameters on configuration reload
This is needed for WPS AP reconfiguration with driver wrappers that do
not use hostapd MLME.
2009-03-27 16:10:14 +02:00
Masashi Honma
871bb568d2 Fix: Loop in driver selection routine
Increment an index variable not 'i' but 'j'.

(this was broken yesterday by a cleanup change
3067ac2bb8)
2009-03-27 10:49:47 +02:00
Jouni Malinen
89111f3bbc Rename struct wpa_driver_ops to hapd_driver_ops
This avoids conflicts with the wpa_supplicant structure with the same
name.
2009-03-26 20:35:49 +02:00
Jouni Malinen
b6a7859d15 Move hostapd_init() into main.c 2009-03-26 19:23:41 +02:00
Jouni Malinen
3067ac2bb8 Get rid of couple of shadowed variable warnings 2009-03-26 19:23:02 +02:00
Jouni Malinen
21db94c5dc Remove shadowed variable 2009-03-26 19:09:25 +02:00
Jouni Malinen
5c333467b3 Move main() and configuration file related functions into main.c
This makes it easier to share hostapd.c with wpa_supplicant
2009-03-26 19:06:02 +02:00
Jouni Malinen
c746331b52 Allow hostapd/config.h and wpa_supplicant/config_ssid.h coexist
Move the shared IEEE 802.11w enum definition into src/common/defs.h to
avoid redefinition when both configuration structures are included into
the same file.
2009-03-26 16:06:15 +02:00
Jouni Malinen
89d39d9d6c Move hostapd driver_ops to use similar set_key with wpa_supplicant 2009-03-25 17:49:22 +02:00
Jouni Malinen
fb86519d12 Replace deprecated add_sta() with add_sta2() 2009-03-25 16:55:09 +02:00
Jouni Malinen
909a6ef00c Remove deprecated version of set_freq() and rename the new version 2009-03-25 16:48:22 +02:00
Jouni Malinen
4f86ca6870 Remove unused set_assoc_ap() wpa_driver_ops
The need for this was removed with the experimental
hostapd-as-a-client-STA functionality.
2009-03-25 16:45:57 +02:00
Jouni Malinen
089757c6a9 Fix wpa_supplicant AP build after hostapd header file cleanup 2009-03-25 16:35:26 +02:00
Jouni Malinen
b1c0e29733 Include config.h explicitly into files that actually use it
hostapd.h does not need to include config.h.
2009-03-25 16:29:00 +02:00
Jouni Malinen
97234b5073 Move STA entry structure into sta_info.h and remove ap.h
This cleans up some of the hostapd include file usage and only includes
the needed STA flags into driver wrappers.
2009-03-25 16:13:35 +02:00
Jouni Malinen
2991469cd1 Replace sta_aid array with bitfield
The actual pointer to struct sta_info was not really used and it is
enough to use a single bit to indicate whether an AID is allocated. This
makes the BSS data take less memory while making the allocation routine
faster and removing the arbitrary MAX_AID_TABLE_SIZE limit of 128 STAs.
2009-03-25 15:54:25 +02:00
Jouni Malinen
d42a62b36c Move AID derivation into a separate function 2009-03-25 15:35:00 +02:00
Jouni Malinen
1e5839e06f Rename EAP server defines from EAP_* to EAP_SERVER_*
This allows separate set of EAP server and peer methods to be built into
a single binary.
2009-03-25 12:06:19 +02:00
Jouni Malinen
17449e213f Remove local variable shadowing to avoid a warning 2009-03-25 11:36:09 +02:00
Jouni Malinen
5ce2a4649d driver_madwifi: Fix build with old driver versions
Do not reference ie.rsn_ie in wpa_hexdump outside #ifdef MADWIFI_NG.
[Bug 302]
2009-03-22 15:54:26 +02:00
Jouni Malinen
75864b7f63 Fix UNIX domain socket address handling to be more portable
Remove all fields before sun_path before printing or comparing sun_path
contents. Using offsetof should be portable. In addition, set sun_len
for FreeBSD.
2009-03-21 22:07:14 +02:00
Jouni Malinen
7d737d6bf9 Fix FreeBSD build by not adding -ldl
Unlike Linux, FreeBSD does not use libdl.
2009-03-21 20:59:07 +02:00
Jouni Malinen
4df91b3f3f Fix driver_bsd.c build for FreeBSD 2009-03-21 20:58:27 +02:00
Jouni Malinen
8104763131 Fix CONFIG_DRIVER_RADIUS_ACL=y build 2009-03-21 20:56:39 +02:00
Jouni Malinen
4cb0dcd92d Fix IEEE 802.11r key derivation function to match with the standard
IEEE Std 802.11r-2008, 8.5.1.5.2 starts the 'i' counter from 1, not 0.
Note: this breaks interoperability with previous versions. [Bug 303]
2009-03-19 15:46:00 +02:00
Jouni Malinen
c5aaa01562 Detach ctrl_iface monitor if the client socket is removed
No need to wait for 10 errors when using UNIX domain socket; we can
detach the client immediately on ENOENT.
2009-03-17 16:56:30 +02:00
Kel Modderman
bffc384cbf hostapd: Fix some manual page formatting
lintian (Debian package lint tool) found some small deficiencies in
hostapd.8 and hostapd_cli.1.
2009-03-13 20:49:01 +02:00