Commit graph

32 commits

Author SHA1 Message Date
Jouni Malinen
e04019737e GAS client: Make PMF check on RX more consistent
Use the SA field instead of BSSID in the received Action frame to
determine whether PMF has been negotiated with the transmitter. While
these fields are supposed to be same for Public Action frames from an
AP, it would be possible that a frame is received with different values.
The following operations in gas_query_rx() use SA, so do the same for
the PMF check.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-27 19:37:19 +02:00
Jouni Malinen
c24f8e8e75 GAS: Do not cancel initial offchannel wait with comeback delay 1
The minimum comeback delay 1 is used to indicate that fragmentation is
needed instead of indicating that the response is going to be available
only after some time. Do not cancel offchannel wait for this case
between the initial and comeback exchanges to avoid delaying the full
operation unnecessarily.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
364282c8c9 GAS: Retry full GAS query if comeback response is not received
It is possible for a comeback response to get lost especially when going
through a large GAS exchange fragmented to multiple frames in an
environment with interference or other traffic. Make this less likely to
fail the full exchange by trying full GAS query again and using longer
wait time on the GAS comeback exchanges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Matti Gottlieb
8fb718a748 GAS: Shorten the duration of the wait for GAS comeback response
When exchanging GAS frames with the AP, the initial response from the AP
may take a while to come, since the AP may need to fetch the info from a
server. The next fragments/comeback response frames should take much
less time since the AP already has all of the info, so the wait time
for these frames can be reduced.

In addition, some drivers, e.g., mac80211, try to combine ROC based flows,
to improve medium utilization. For example, if the requested ROC fits
entirely in a previous requested ROC they can be combined. Thus, reducing
the wait time for the next frames can improve medium utilization.

Shorten the duration of GAS comeback to improve medium utilization and
overall GAS exchange times.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-12-20 19:42:12 +02:00
Jouni Malinen
c012567df6 GAS: Clear offchannel_tx_started when ending remain-on-channel
Commit 2c0d0ae370 ('GAS: End
remain-on-channel due to delayed GAS comeback request') started ending
the remain-on-channel operation between the initial request and the
following comeback request. However, it did not check or update the
offchannel_tx_started variable. While this alone would not necessarily
be problematic, this makes it more difficult to optimize wait time for
offchannel TX operations, so make sure the internal tracking variable
gets updated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 19:40:01 +02:00
Matti Gottlieb
2c0d0ae370 GAS: End remain-on-channel due to delayed GAS comeback request
During the sequence of exchanging GAS frames with the AP, the AP can
request to come back in X amount of time and resend the GAS request.

Previously, wpa_supplicant did not terminate the remain-on-channel
session, but rather waited until the requested comeback delay had
expired, and then tried to send the GAS frame (potentially to save the
time that is required to schedule a new remain on channel flow).

This might cause unnecessary idle time (can be close to 1000 ms) in
which the device might be off-channel. Ending the current
remain-on-channel session and then rescheduling makes better usage of
the time in this case.

End remain-on-channel session due to receiving a delayed GAS comeback
request from the AP.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-12-18 20:32:53 +02:00
Jouni Malinen
5d017065a0 GAS: Clean up Query Response length validation
Previous version was correct, but apparently too complex for some static
analyzers. (CID 68119)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 21:03:40 +02:00
Jouni Malinen
c267753ba2 Add support for using random local MAC address
This adds experimental support for wpa_supplicant to assign random local
MAC addresses for both pre-association cases (scan, GAS/ANQP) and for
connections. MAC address policy for each part can be controlled
separately and the connection part can be set per network block.

This requires support from the driver to allow local MAC address to be
changed if random address policy is enabled. It should also be noted
that number of drivers would not support concurrent operations (e.g.,
P2P and station association) with random addresses in use for one or
both.

This functionality can be controlled with the global configuration
parameters mac_addr and preassoc_mac_addr which set the default MAC
address policies for connections and pre-association operations (scan
and GAS/ANQP while not connected). The global rand_addr_lifetime
parameter can be used to set the lifetime of a random MAC address in
seconds (default: 60 seconds). This is used to avoid unnecessarily
frequent MAC address changes since those are likely to result in driver
clearing most of its state. It should be noted that the random MAC
address does not expire during an ESS connection, i.e., this lifetime is
only for the case where the device is disconnected.

The mac_addr parameter can also be set in the network blocks to define
different behavior per network. For example, the global mac_addr=1 and
preassoc_mac_addr=1 settings and mac_addr=0 in a home network profile
would result in behavior where all scanning is performed using a random
MAC address while connections to new networks (e.g.,
Interworking/Hotspot 2.0) would use random address and connections to
the home network would use the permanent MAC address.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:19 +03:00
Jouni Malinen
5519241676 GAS: Limit TX wait time based on driver maximum value
The GAS query TX operation used a fixed wait time of 1000 ms for the
reply. However, it would be possible for the driver to not support this
long remain-on-channel maximum. Limit this wait time based on driver
support, if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-12 10:56:06 +03:00
Jouni Malinen
2af4d87fc3 GAS: Fix additional comeback delay with status code 95
The special case of non-zero status code used in a GAS Comeback Response
frame to indicate that additional delay is needed before the response is
available was not working properly. This case needs to allow the status
code check to be bypassed for the comeback case prior to having received
any response data.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-01 17:06:20 +02:00
Jouni Malinen
230e373539 HS 2.0R2: Add GAS operation duration statistics into debug
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Andrei Otcheretianski
b3253ebb73 wpa_supplicant: Complete radio works on disable event
While testing rfkill blocking of a scanning interface, it
was seen that the ongoing scan never completes. This happens
since EVENT_SCAN_RESULTS is discarded on a disabled interface.

Fix this and also other possible radio work completion issues
by removing all the radio works (including started) of the
disabled interface.

To be able to remove already started radio works, make their
callbacks be reentrant with deinit flag (when the work
is started), so each radio work should be able to handle
its own termination.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-02-16 00:06:23 +02:00
Jouni Malinen
c5a64e2d51 GAS client: Use Protected Dual of Public Action frames with PMF
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Conver Public Action
GAS queries to use Dual of Public Action frame if PMF has been
negotiated with the AP to which the frame is being sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:50:28 +02:00
Jouni Malinen
4bb232153f Remove unneeded GAS query delay on connection-in-progress
This type of protection against concurrent connection and offchannel GAS
operations is now enforced through the wpa_radio work mechanism, so this
separate protection mechanism is not needed anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
b9e6d7001d Use radio work for GAS requests
Avoid concurrent GAS operations with any other exclusive use of the
radio by using the radio work queuing mechanism. This replaces some of
the earlier constraints on concurrent operations with the more generic
wpa_radio work concept.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
6ffa1687ee Add GAS-QUERY-START and GAS-QUERY-DONE event messages
External programs can use these new control interface events to better
track progress of GAS operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
313424d46e GAS: Add support for multiple pending queries for the same destination
Need to use the pointer to the current ongoing query instead of matching
from the pending list based on the destination address so that we get
the correct query instance when processing the TX status report.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 14:37:37 +03:00
Jouni Malinen
cbc5484892 GAS: Do not start new scan operation during an ongoing GAS query
These operations can have conflicting offchannel requirements, so wait
with a new scan trigger until a pending GAS query has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:20:38 +03:00
Kyeyoon Park
c377514337 GAS: Delay GAS query Tx while scanning/connecting
Offchannel operations needed for a GAS query can conflict with ongoing
scan/connection progress, so delay GAS queries if such an operation is
in progress on the current interface or any virtual interface sharing
the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:15:45 +03:00
Kyeyoon Park
24c694b465 GAS: Delay GAS query Tx while another query is in progress
It would be possible to issue another GAS query when a previous one is
still in progress and this could result in conflicting offchannel
operations. Prevent that by delaying GAS query initiation until the
previous operation has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:13:42 +03:00
Jouni Malinen
a83e5749ac GAS: Update timeout from TX status handler
This allow GAS operations to be fine-tuned based what happens with GAS
query TX. Failed queries are timed out immediately and acknowledged
queries are given some more time to account for possible TX queue
latencies.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
f65f539d9a GAS: Reduce query timeout to two seconds
The five second timeout for GAS queries is excessive and can result in
long waits in cases where APs are either misconfigured or frames are
lost.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:34 +03:00
Jouni Malinen
7a56af545a GAS: Assign new dialog token even if previous one is free
This makes the design more robust against unexpected duplicates since
each new GAS exchange gets a different dialog token compared to the
previous one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:16 +03:00
Jouni Malinen
9e1ecab1c5 GAS: Ignore replays if previous frag_id without dropping GAS session
It looks like it may be possible for an older GAS response to get retransmitted
even after the first copy has been processed. While this should not really come
up all the way to wpa_supplicant due to sequence number being same (i.e.,
duplicate detection should from the frame), some cases have been observed where
this did cause issues. Drop such a frame silently without dropping the ongoing
GAS session to allow a frame with the next frag_id to be processed after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:08:47 +03:00
Jouni Malinen
a38fdf1c69 Document gas_query.c functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 11:59:26 +02:00
Jouni Malinen
fa5c5b43e4 Interworking: Fix failed GAS query processing
The pending GAS entry must be removed from the list when it is removed.
This fixes an issue with potential segfault due to freed memory being
accessed if the driver fails to accept a GAS query.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-28 17:09:15 +03:00
Jouni Malinen
1f52c2f7b5 GAS: Fix reporting of GAS query timeouts
GAS_QUERY_TIMEOUT value was used for two different things - enum for
status callback and #define for internal eloop timeout). The latter
overwrites the former and as such, the timeout reported ended up going
out with value 5 which matches with GAS_QUERY_CANCELLED instead of
GAS_QUERY_TIMEOUT. This value was not used in existing code, so this
should not modify the current behavior. Anyway, the correct reason for
the failure should be reported. Rename the internal #define for the
timeout period to avoid the name conflict. [Bug 463]

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:33:00 +03:00
Jouni Malinen
e22d4d957b Remove the GPL notification from files contributed by Atheros
Remove the GPL notification text from files that were initially
contributed by Atheros Communications or Qualcomm Atheros.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
b106173a82 Add no_cck parameter for send_action() driver_ops
This can be used to apply the no-CCK rule conditionally depending on
which frame is being sent. The no-CCK rule applies only for P2P
management frames while SA Query and FT use cases do not have similar
restrictions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 21:49:46 +03:00
Jouni Malinen
298716b495 Convert signed bit field to unsigned one
It's cleaner to use unsigned bit field with one bit values.
2011-10-16 13:21:54 +03:00
Jouni Malinen
24f6497c34 GAS: Use off-channel operations for requests
This separates off-channel Action frame TX/RX from P2P into a generic
implementation that can now be used both for P2P and GAS needs.
2011-09-29 22:19:51 +03:00
Jouni Malinen
04ea7b7947 GAS: Add a generic GAS query module
This implements GAS request mechanism that is aimed at being used to
replace use case specific GAS/ANQP implementations in the future.
Compared to the earlier implementation in P2P SD, this implementation
includes support for multiple concurrent requests and more thorough
validation of frames against the pending query data.

GAS header processing, including comeback and reassembly, are handled
within gas_query.c and the users of this module will only need to
provide the Query Request and process the (possibly reassembled)
Query Response.
2011-09-29 22:19:15 +03:00