Commit graph

4900 commits

Author SHA1 Message Date
Jouni Malinen
8b138d2826 OWE: PTK derivation workaround in STA mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround=1 network parameter can be used
to enable older behavior mainly for testing purposes. There is no impact
to group 19 behavior, but if enabled, this will make group 20 and 21
cases use SHA256-based PTK derivation which will not work with the
updated OWE implementation on the AP side.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Vamsi Krishna
d0e116f61f Enhance get_mode() to return correct hw_mode with 6 GHz support
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to be stored
in a separate hw_features set (but with same mode
HOSTAPD_MODE_IEEE80211A) due to possibility of different HT/VHT/HE
capabilities being available between the 5 GHz and 6 GHz bands.

Iterate through all hw_features sets and check and match the band of
channel supported by the hw_features set while getting the hw_features
set in get_mode(). This allows both the 5 GHz and 6 GHz channels to be
found and correct capabilities to be used in cases where the driver
reports different capability values between 5 and 6 GHz channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-23 15:48:51 +02:00
Chaitanya Tata
4658eb77d6 Remove deprecated text for ap_scan=0
Users might be tempted to try ap_scan=0 for offloading scan,
ap_selection and, WPA to driver. Update the text to reflect that this is
deprecated.

Jouni confirmed deprecation in
https://www.spinics.net/lists/hostap/msg06482.html

Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.com>
2020-01-21 18:17:07 +02:00
Jouni Malinen
5e32fb0170 SAE: Use Anti-Clogging Token Container element with H2E
IEEE P802.11-REVmd was modified to use a container IE for anti-clogging
token whenver H2E is used so that parsing of the SAE Authentication
frames can be simplified.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Jouni Malinen
e36a5894d0 SAE: Use H2E whenever Password Identifier is used
IEEE P802.11-REVmd was modified to require H2E to be used whenever
Password Identifier is used with SAE.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Jouni Malinen
29dd0b3164 SAE H2E: Check H2E-only BSS membership selector only if SAE is enabled
This BSS membership selector has impact only for SAE functionality, so
ignore it when configured not to use SAE. This allows WPA-PSK connection
to and AP that advertises WPA-PSK and SAE while requiring H2E for SAE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-20 21:17:28 +02:00
Jouni Malinen
dd530b8739 Silence compiler warning with CONFIG_NO_ROAMING=y
Comment out unused static functions if CONFIG_NO_ROAMING is defined.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 12:40:17 +02:00
Alexander Wetzel
a919a26035 Introduce and add key_flag
Add the new set_key() parameter "key_flag" to provide more specific
description of what type of a key is being configured. This is needed to
be able to add support for "Extended Key ID for Individually Addressed
Frames" from IEEE Std 802.11-2016. In addition, this may be used to
replace the set_tx boolean eventually once all the driver wrappers have
moved to using the new key_flag.

The following flag are defined:

  KEY_FLAG_MODIFY
    Set when an already installed key must be updated.
    So far the only use-case is changing RX/TX status of installed
    keys. Must not be set when deleting a key.

  KEY_FLAG_DEFAULT
    Set when the key is also a default key. Must not be set when
    deleting a key. (This is the replacement for set_tx.)

  KEY_FLAG_RX
    The key is valid for RX. Must not be set when deleting a key.

  KEY_FLAG_TX
    The key is valid for TX. Must not be set when deleting a key.

  KEY_FLAG_GROUP
    The key is a broadcast or group key.

  KEY_FLAG_PAIRWISE
    The key is a pairwise key.

  KEY_FLAG_PMK
    The key is a Pairwise Master Key (PMK).

Predefined and needed flag combinations so far are:

  KEY_FLAG_GROUP_RX_TX
    WEP key not used as default key (yet).

  KEY_FLAG_GROUP_RX_TX_DEFAULT
    Default WEP or WPA-NONE key.

  KEY_FLAG_GROUP_RX
    GTK key valid for RX only.

  KEY_FLAG_GROUP_TX_DEFAULT
    GTK key valid for TX only, immediately taking over TX.

  KEY_FLAG_PAIRWISE_RX_TX
    Pairwise key immediately becoming the active pairwise key.

  KEY_FLAG_PAIRWISE_RX
    Pairwise key not yet valid for TX. (Only usable with Extended Key ID
    support.)

  KEY_FLAG_PAIRWISE_RX_TX_MODIFY
    Enable TX for a pairwise key installed with KEY_FLAG_PAIRWISE_RX.

  KEY_FLAG_RX_TX
    Not a valid standalone key type and can only used in combination
    with other flags to mark a key for RX/TX.

This commit is not changing any functionality. It just adds the new
key_flag to all hostapd/wpa_supplicant set_key() functions without using
it, yet.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Jouni Malinen
f822546451 driver: Move set_key() parameters into a struct
This makes it more convenient to add, remove, and modify the parameters
without always having to update every single driver_*.c implementation
of this callback function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 00:48:57 +02:00
Vamsi Krishna
33c8a10498 Do not select APs found on disabled channels for connection
If a channel list changed event is received after a scan and before
selecting a BSS for connection, a BSS found on a now disabled channel
may get selected for connection. The connect request issued with the BSS
found on a disabled channel is rejected by cfg80211. Filter out the BSSs
found on disabled channels and select from the other BSSs found on
enabled channels to avoid unnecessary connection attempts that are bound
to fail.

The channel list information will be updated by the driver in cases like
country code update, disabling/enabling specific bands, etc. which can
occur between the scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 16:19:47 +02:00
Markus Theil
8296ee1805 RSN IBSS: Fix EAPOL TX using control port
This was previously done only in supplicant role, but a similar change
is needed for the authenticator role.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-06 22:33:45 +02:00
Markus Theil
a79ed06871 Add no_encrypt flag for control port TX
In order to correctly encrypt rekeying frames, wpa_supplicant now checks
if a PTK is currently installed and sets the corresponding encrypt
option for tx_control_port().

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-05 20:34:50 +02:00
Brendan Jackman
144314eaa7 wpa_supplicant: Send EAPOL frames over nl80211 where available
Linux kernel v4.17 added the ability to request sending control port
frames via nl80211 instead of a normal network socket. Doing this
provides the device driver with ordering information between the
control port frames and the installation of keys. This empowers it to
avoid race conditions between, for example, PTK replacement and the
sending of frame 4 of the 4-way rekeying handshake in an RSNA. The
key difference between a TX_CONTROL_PORT and normal socket send is
that the device driver will certainly get any EAPOL frames comprising
a 4-way handshake before it gets the key installation call
for the derived key. By flushing its TX buffers it can then ensure
that no pending EAPOL frames are inadvertently encrypted with a key
that the peer will not yet have installed.

Update the RSN supplicant system to use this new operation for sending
EAPOL-Key frames when the driver reports that this capability is
available; otherwise, fall back to a normal Ethernet TX.

I have tested this on DMG (11ad/ay) devices with an out-of-tree Linux
driver that does not use mac80211. Without this patch I consistently see
PTK rekeying fail if message 4/4 shares a stream with other in-flight
traffic. With this patch, and the driver updated to flush the relevant TX
queue before overwriting a PTK (knowing, now, that if there was a message
4/4 related to the key installation, it has already entered the driver
queue), rekeying is reliable.

There is still data loss surrounding key installation - this problem is
alluded to in IEEE Std 802.11-2016, 12.6.21, where extended Key ID
support is described as the eventual solution. This patch aims to at
least prevent rekeying from totally breaking the association, in a way
that works on kernels as far back as 4.17 (as per Alexander Wetzel
extended Key ID support should be possible on 5.2).

See http://lists.infradead.org/pipermail/hostap/2019-May/040089.html for
a little more context.

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2020-01-05 20:34:15 +02:00
Brendan Jackman
8759e9116a nl80211: Control port over nl80211 helpers
Linux kernel v4.17 added the ability to request sending controlled port
frames (e.g., IEEE 802.1X controlled port EAPOL frames) via nl80211
instead of a normal network socket. Doing this provides the device
driver with ordering information between the control port frames and the
installation of keys. This empowers it to avoid race conditions between,
for example, PTK replacement and the sending of frame 4 of the 4-way
rekeying handshake in an RSNA. The key difference between the specific
control port and normal socket send is that the device driver will
certainly get any EAPOL frames comprising a 4-way handshake before it
gets the key installation call for the derived key. By flushing its TX
buffers it can then ensure that no pending EAPOL frames are
inadvertently encrypted with a key that the peer will not yet have
installed.

Add a CONTROL_PORT flag to the hostap driver API to report driver
capability for using a separate control port for EAPOL frames. This
operation is exactly like an Ethernet send except for the extra ordering
information it provides for device drivers. The nl80211 driver is
updated to support this operation when the device reports support for
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211. Also add a driver op
tx_control_port() for request a frame to be sent over the controlled
port.

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2020-01-05 19:43:52 +02:00
Jouni Malinen
b7bb2c0204 P2P: Move p2p_long_listen into struct wpa_global
This variable is not specific to any P2P group interface and since it
was already used through global->p2p_init_wpa_s, it is cleaner to simply
move this to the global structure so that there is a single variable
instead of per-interface variables and need to pick the correct
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 23:11:28 +02:00
Benjamin Berg
9ad3c12dd1 P2P: Always use global p2p_long_listen
The p2p_long_listen value was set on the control wpa_s struct while in a
lot of cases it operated on the p2p struct. Explicitly use the global
p2p_init_wpa_s struct in cases where we might not be operating on it
already.

Without this, simply starting a p2p_listen operation (e.g., using
wpa_cli) will not work properly. As the p2p_long_listen is set on the
controlling interface and wpas_p2p_cancel_remain_on_channel_cb() uses
p2p_init_wpa_s, it would not actually work. This results in
wpa_supplicant stopping listening after the maximum remain-on-channel
time passes when using a separate P2P Device interface.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
2020-01-04 23:07:31 +02:00
Jouni Malinen
af670cb418 SME: Postpone current BSSID clearing until IEs are prepared
sme_send_authentication() could fail before actually requesting the
driver to authenticate with a new AP. This could happen after
wpa_s->bssid got cleared even though in such a case, the old association
is maintained and still valid. This can result in unexpected behavior
since wpa_s->bssid would not match the current BSSID anymore.

Fix this by postponing clearing of wpa_s->bssid until the IE preparation
has been completed successfully.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 18:06:01 +02:00
Jouni Malinen
665a3007fb driver: Add no_encrypt argument to send_mlme()
This is in preparation of being able to remove the separate send_frame()
callback.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 13:53:32 +02:00
Jouni Malinen
9474654752 IBSS RSN: Use send_mlme() instead of send_frame() for Authentication frames
send_frame() is documented to be used for "testing use only" and as
such, it should not have used here for a normal production
functionality. Replace this with use of send_mlme() which is already
used for sending Authentication frames in number of other cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 12:21:36 +02:00
Jouni Malinen
6c57019376 Test functionality to override driver reported signal levels
"SET driver_signal_override <BSSID> [<si_signal< <si_avg_signal>
<si_avg_beacon_signal> <si_noise> <scan_level>]" command can now be used
to request wpa_supplicant to override driver reported signal levels for
signal_poll and scan results. This can be used to test roaming behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 20:34:39 +02:00
Jouni Malinen
c8eb7fe66c Fix signal_poll based roaming skip
Fix a rebasing issue in the signal difference calculation. The older
patch was not updated to use the new cur_level local variable to get the
possibly updated signal level for the current BSS.

Fixes: a2c1bebd43 ("Improve roaming logic")
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 20:34:39 +02:00
Roy Marples
a8b00423ea BSD: Use struct ip rather than struct iphdr
As we define __FAVOR_BSD use the BSD IP header.
Compile tested on NetBSD, DragonFlyBSD, and Linux.

Signed-off-by: Roy Marples <roy@marples.name>
2020-01-02 19:17:10 +02:00
Jouni Malinen
ad2f096609 Maintain BSS entries for 5 seconds after interface is disabled
This is targeting the case of MAC address change for an association
which may require the interface to be set down for a short moment.
Previously, this ended up flushing the BSS table that wpa_supplicant
maintained and that resulted in having to scan again if the MAC address
was changed between the previous scan and the connection attempt. This
is unnecessary extra latency, so maintain the BSS entries for 5 seconds
(i.e., the same time that the old scan results are consider valid for a
new connection attempt) after an interface goes down.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 12:58:58 +02:00
Jouni Malinen
988f14448a Indicated if the selected BSS is the current BSS
This makes scan result processing a bit more readable in debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 17:55:26 +02:00
Jouni Malinen
a8ad9c31db Make min_diff determination from cur_level more readable
This handles both the dBm and unspecified unit cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 17:46:03 +02:00
Jouni Malinen
41f72d7356 Use sel_est consistently with cur_sel in wpa_supplicant_need_to_roam()
This makes the code a bit easier to read.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 17:37:58 +02:00
Matthew Wang
a2c1bebd43 Improve roaming logic
Currently, wpa_supplicant may roam too aggressively; the need_to_roam()
function will return early with a roaming decision if the difference in
signal level or throughput between the current and selected APs is
"sufficiently large." In particular, if the selected AP's estimated
throughput is more than 5k greater than the current AP's estimated
throughput, wpa_supplicant will decide to roam. Otherwise, if the
selected AP's signal level is less than the current AP's signal level,
or the selected AP's estimated throughput is at least 5k less than the
current AP's estimated throughput, wpa_supplicant will skip the roam.
These decisions are based only on one factor and can lead to poor
roaming choices (e.g., a roam should not happen if the selected AP's
estimated throughput meets the threshold but the current signal and
throughput are already good, whereas a roam should happen if the signal
is slightly worse but the estimated throughput is significantly better).

This change standardizes the roaming heuristic for signal strength
difference requirements and will hopefully improve user experience. The
change can be summarized as follows: based on the current signal level,
a certain roaming difficulty is assigned. Based on the selected AP's
estimated throughput relative to the current AP's estimated throughput,
the difficulty is adjusted up or down. If the difference in signal level
meets the threshold, a roam happens.

The hard-coded values were selected purely based on the previous version
of this function. They may eventually need to be fine-tuned for optimal
performance.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-01-01 17:33:51 +02:00
Jouni Malinen
9c8d550b77 Allow roam to lower signal level if throughput benefit is significant
Do not prevent roam to a different BSS based only on the signal level
with the current BSS being higher than with the selected BSS. If the
estimated throughput is significantly higher (> 20%), allow roaming if
the following conditions are met.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 17:09:18 +02:00
Jouni Malinen
9fafefb9e5 Skip roaming based on signal level difference if current SNR is good
If the current SNR with the associated BSS is sufficiently good (better
than GREAT_SNR = 25), there is limited benefit from moving to another
BSS even if that BSS were to have a higher signal level. As such, skip
roaming based on the signal level difference between the selected BSS
from scan results and the current BSS for such cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 16:56:40 +02:00
Jouni Malinen
f4f7600adf Use signal_poll noise information for roaming, if available
Using average signal strength from the driver and hardcoded noise floor
does not look like an ideal design since there can be significant
differences in the driver-reported noise floor values. Furthermore, even
though the current noise floor is a snapshot from the driver, it is
common for drivers to use a noise floor value from a longer calibration
step and that should not prevent the driver provided value from being
used. This makes the comparisons of the signal strengths between the
current AP (signal_poll) and other APs (scan) more accurate.

As an example, test runs in home environment showed 5 dB difference
between the driver reported noise floor and the hardcoded value and this
could result in significant differences in estimated throughput
calculation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 13:38:11 +02:00
Jouni Malinen
f97baef254 Clear SME auth_alg on FLUSH
This avoids a testing failure in the following test case sequence:
ap_ft_r1_key_expiration ap_open_external_assoc

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 12:33:57 +02:00
Jouni Malinen
0d1d1f0d21 Clear last Michael MIC error timer on FLUSH
TKIP countermeasures were already terminated on FLUSH, but the timer for
detecting two Michael MIC errors within 60 seconds was left behind. This
resulted in test case failures with following test sequence:
ap_cipher_tkip_countermeasures_sta ap_cipher_tkip_countermeasures_sta2

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-01 12:23:25 +02:00
Matthew Wang
69ccc557d8 wpa_supplicant: Fall back to avg_signal in roaming decision
Some drivers (e.g. Marvell WiFi) don't report avg_beacon_signal, but
it's still useful to poll for the signal again when a roaming decision
needs to be made. Use si.avg_signal when si.avg_beacon_signal is not
available.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-12-31 00:23:42 +02:00
Emmanuel Grumbach
7e7b23e229 Update throughput estimate for the current BSS based on signal poll
We saw that on certain platforms in certain places we keep switching
between two APs and eventually get the same RSSI. Debugging showed that
we have a very big difference between the two antennas.

Ant A can hear AP A very well (-60) but AP B very bad (-80)
Ant B can hear AP B very well (-60) but AP A very bad (-80)

When the device associates to AP A, it'll learn to use Ant A. If the
device uses one single antenna to receive the scan results, it may hear
the AP it is currently associated to on the second antenna and get bad
results. Because of that, the wpa_supplicant will roam to the other AP
and the same scenario will repeat itself:

Association to AP A (Ant A reports -60).
Scan on Ant A: AP A: -60, AP B: -80
Scan on Ant B: AP A: -80, AP A: -60 ==> ROAM.

Association to AP B (Ant B reports -60)
Scan on Ant A: AP A: -60, AP B: -80 ==> ROAM

Etc...

Improve this by querying the signal level of the current AP using
drv_signal_poll() instead of relying on the signal level that we get
from the scan results. Also update the throughput estimate based on the
likely more accurate values for the current association.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2019-12-31 00:21:37 +02:00
Emmanuel Grumbach
ad06ac0b04 Move throughput estimation into a helper function
This is a step towards allowing this functionality to update the scan
result -based values with the values from a signal poll for the current
BSS.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2019-12-31 00:17:04 +02:00
Emmanuel Grumbach
ef1a45f28a Move scan/roaming related defines to a header file
This is a step towards allowing these values to be used in both scan.c
and events.c.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2019-12-31 00:04:33 +02:00
Emmanuel Grumbach
98ea9d5d51 Use local variables for current BSS signal strength in roaming
This is a step towards allowing these values to be determined based on
signal poll instead of scan results.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2019-12-30 23:57:47 +02:00
Alfonso Sánchez-Beato
02c21c02d0 wpa_supplicant: Do not disconnect on deinit if WoWLAN is enabled
Do not disconnect on interface deinit when WoWLAN is enabled, so we can
boot the system with WoWLAN after S5 (poweroff).

Signed-off-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
2019-12-30 18:51:06 +02:00
Bilal Hatipoglu
59536a33d8 wpa_cli: WPS-PIN-ACTIVE and WPS-CANCEL events for action scripts
These events were added in commit b1b62a1364 ("WPS: Add WPS-PIN-ACTIVE
and WPS-CANCEL events").

Signed-off-by: Bekir Celik <bekir.celik@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-30 18:36:57 +02:00
Andrei Otcheretianski
522450b7b1 AP: Determine Short SSID value for the BSS
This can be used in the future to implement support for RNR and scanning
extensions using a shorter field for the SSID.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-12-28 22:32:14 +02:00
Felix Fietkau
41b06b065e mesh: Fix race condition in mesh mpm new peer handling
When wpa_supplicant receives another new peer event before the first one
has been processed, it tries to add a station to the driver a second
time (which fails) and then tears down the station entry until another
event comes in.

Fix this by only adding a station to the driver if it didn't exist
already.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-12-28 20:56:03 +02:00
Lubomir Rintel
a383db0646 defconfig: Enable MACsec
Debian and Fedora enable it, NetworkManager uses it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-12-28 18:28:10 +02:00
Jouni Malinen
53661e3a9a Allow debug log to be written to both syslog and file
If hostapd or wpa_supplicant is started with both -s and -f command line
arguments, debug log ended up being written only into syslog and the log
file was left empty. Change this so that the log entries will be written
to both places. Either -s or -f (or both) results in debug log to stdout
being disabled which was already the case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 18:28:10 +02:00
Jouni Malinen
68f9f480ef wpa_gui: Silence a compiler warning
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 00:17:55 +02:00
Victor Ananyev
eadfeb0e93 wpa_gui: Show entire list of networks
Use LAST_ID of LIST_NETWORKS to load all the network entries iteratively
if there is large enough number of networks to not fit in a single
response.

Signed-off-by: Victor Ananyev <vindex10@gmail.com>
2019-12-28 00:16:38 +02:00
Victor Ananyev
a3b59fa111 wpa_cli: Let LAST_ID argument to be used for LIST_NETWORKS
This allows starting point of the network list to be specified so that
the potentially long response can be fragmented into multiple fetch
operations.

Signed-off-by: Victor Ananyev <vindex10@gmail.com>
2019-12-27 23:56:02 +02:00
Sergey Matyukevich
078217a2d7 STA OBSS: Update secondary channel info after CSA
Field wpa_s->sme.ht_sec_chan keeps secondary channel for the 40 MHz
band. This field is used to prepare a list of channels for the STA OBSS
scan. Initially, the secondary channel is set to HT_SEC_CHAN_UNKNOWN.
Later on, in function wpa_obss_scan_freq_list() it is obtained from the
current BSS HT operation IE. However, the secondary channel information
is not updated after channel switch, which may lead to an incorrect list
of channels prepared for the STA OBSS scan.

Update ht_sec_chan according to the channel switch event data to fix
this.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-12-27 21:04:57 +02:00
Sergey Matyukevich
3204795d7a STA OBSS: Add check for overlapping BSSs
In the previous implementation connected STA performs OBSS scan
according to requests from its 20/40 MHz AP. However STA checks only 40
MHz intolerance subfield from HT Capabilities element in scan results.
Meanwhile, as per IEEE Std 802.11-2016, 11.16.12, STA should check
overlapping BSSs as well.

Note that all the required code to check overlapping BSSs did already
exist for AP mode since AP does those checks properly before operating
as 20/40 MHz BSS in the 2.4 GHz band. Use that existing code by replace
existing 40 MHz intolerance check in sme_proc_obss_scan() with the new
shared helper function check_bss_coex_40mhz().

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-12-26 11:41:01 +02:00
Ben Greear
bf3ab50f4f Change some RRM debug messages from wpa_printf() to wpa_dbg()
This gives us the network device name in logging messages, which can be
helpful when having one wpa_supplicant process handle multiple devices.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-12-26 09:41:58 +02:00
Jouni Malinen
9b391715cb mesh: Allow group management cipher to be configured
This allows BIP-GMAC-128, BIP-GMAC-256, or BIP-CMAC-256 to be used
instead of the previously hardcoded AES-128-CMAC as the group management
cipher when using mesh with PMF. For now, this can be configured by
setting a single group_mgmt value in the network block and doing that
consistently through all the STAs in the mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:43:35 +02:00
Jouni Malinen
65d0b67c22 mesh: Increase plink action frame AMPY buffer length for max GTK/IGTK
The previous calculation of the buffer length did not take into account
the possibility of 32-octet GTK and IGTK values and it was also missing
something to cover the 16 octet keys that are supported now. Other
buffer elements were likely sufficient to cover all these cases, but
anyway, it is better to allocate sufficient size specifically for AMPE
to avoid issues in the future.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:35:40 +02:00
Bilal Hatipoglu
b1b62a1364 WPS: Add WPS-PIN-ACTIVE and WPS-CANCEL events
WPS_EVENT_CANCEL is added to indicate cancellation of a WPS operation
for any reason in hostapd/wpa_supplicant.

WPS_EVENT_PIN_ACTIVE is added to indicate when a PIN operation is
triggered in wpa_supplicant.

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-25 20:58:52 +02:00
Bilal Hatipoglu
0b1839405e Add "reconnect" cmdline argument to hostapd_cli/wpa_cli
When the newly added "-r" parameter is used, both clis will try to
reconnect forever on connection lost until signalled (ctrl+c) or
terminated. This is useful only when used with -a to take action to
retrieve events or get status and the cli process stays even if
hostapd/wpa_supplicant daemons restart for some reason (e.g.,
configuration change).

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-25 20:54:44 +02:00
Jouni Malinen
4318a635a9 DBus: Update dont_quote[] with new network profile parameters
This array had not been updated for years (since it was initially added)
and it was missing new network profile parameters that were not quoted
strings (but also not integers that could be set as integer types). Add
those missing non-quoted-strings to allow them to be set through the
DBus interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 12:45:44 +02:00
Jouni Malinen
26a00ba8bd DBus: Remove not existing network profile params from dont_quote[]
These parameters are global parameters, not network profile parameters,
and as such, do not below in dont_quote[] which is used to determine
whether a network profile parameter needs to be quoted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 12:26:33 +02:00
Matthew Wang
23d87687c2 dbus: Move roam metrics to the correct interface
These properties were in the wpas_dbus_bss_properties array when they
should have been in the wpas_dbus_interface_properties array. Move them
to the right place. This is the logical location for these properties
and it matches both the other parts of the implementation (e.g., being
in enum wpas_dbus_prop, not in enum wpas_dbus_bss_prop) and what
was originally documented for the interface in dbus.doxygen.

Fixes: 2bbad1c7c9 ("dbus: Export roam time, roam complete, and session length")
Fixes: 80d06d0ca9 ("dbus: Export BSS Transition Management status")
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-12-24 21:16:23 +02:00
Sam Tygier
32289112c4 wpa_passphrase: Output errors to stderr
The stdout of wpa_passphrase is often piped directly into the
wpa_supplicant config file. In case of errors these will be written to
the file and possibly not noticed by the user.

Use fprintf to print errors to stderr.

Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
2019-12-24 11:14:27 +02:00
Jouni Malinen
efaa6256e2 More detailed documentation on ieee80211w configuration parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 10:48:09 +02:00
Alexander Wetzel
84877f253d wpa_supplicant: Do not try to detect PSK mismatch during PTK rekeying
When a PTK rekey fails it can't be caused by a PSK mismatch. Report a
possible PSK mismatch only during the initial 4-way handshake to avoid
incorrect reports.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2019-12-21 17:10:17 +02:00
Jouni Malinen
9be30ffc13 DPP: Abort ongoing scan if connection status needs to be sent
Ongoing scan could prevent the station Enrollee from sending out DPP
connection status after the 15 second timeout and that would result in
the Configurator timing out on the wait for the status report. Abort any
ongoing scan, if needed, to avoid this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:51:59 +02:00
Vamsi Krishna
3f3876344e SAE: Enable NEED_DH_GROUPS_ALL for CONFIG_TESTING_OPTIONS=y builds
Enable all DH FFC groups for SAE in wpa_supplicant testing builds. These
are needed to allow more testing coverage for AP functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:27:19 +02:00
Ankita Bajaj
5f9b4afdfa Use frequency in HT/VHT validation steps done before starting AP
Using the channel parameter for validating allowed channel combinations
is not scalable to add 6 GHz support in the future since channel numbers
are duplicated between 2.4 GHz / 5 GHz bands and 6 GHz band. Hence use
frequency field for all channel combination validation steps done before
starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:05:39 +02:00
Ahmad Masri
996662250d P2P: Add support for EDMG channels
This allows a P2P connection over P802.11ay EDMG channels to achieve the
highest link speed that the standard allows for channel bonding (CB) up
to CB4.

Let each P2P peer add its EDMG channels to the Supported Channels IE
advertised in P2P GO negotiation. Give EDMG channels priority when peers
negotiate for operating channel.

User may add 'edmg' parameter to p2p_connect, p2p_add_group, and
p2p_invite commands to prefer an EDMG channel for the P2P link. User may
also set p2p_go_edmg=1 in wpa_supplicant configuration file to prefer
EDMG.

When EDMG is used, P2P will try to find the highest channel bonding
supported channel that matches the frequency parameter, if the devices
do not support EDMG, the P2P connection will use a legacy (1-6) 60 GHz
channel.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:13:08 +02:00
Jouni Malinen
e3c476bd8c SAE H2E: Fix RSNXE override in EAPOL-Key msg 2/4 for testing purposes
The previous implementation missed the case where EAPOL-Key frame may be
reported as having been received before the association event is
processed. This would have resulted in not using the RSNXE override for
EAPOL-Key msg 2/4 when the pending EAPOL-Key frame gets processed
immediately after processing the association event. Fix this by moving
the override case to be handled before that.

Fixes: 1325655397 ("SAE H2E: RSNXE override for testing purposes")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-13 03:08:27 +02:00
Jouni Malinen
5661ebd774 DPP: Configurator netRole for Enrollee
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
7404574458 DPP: Replace ap boolean with netRole enum in Configurator params
The netRole enum is more generic and can be extended to include new
roles (e.g., Configurator) more easily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
1325655397 SAE H2E: RSNXE override for testing purposes
"SET rsnxe_override_{assoc,eapol} <hexdump>" can now be used to override
RSNXE in (Re)Association Request frames and EAPOL-Key msg 2/4 for
testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 12:54:54 +02:00
Jouni Malinen
c88e01e1b6 SAE H2E: Fix validation of rejected groups list
check_sae_rejected_groups() returns 1, not -1, in case an enabled group
is rejected. The previous check for < 0 could not have ever triggered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:28:13 +02:00
Jouni Malinen
b834e97003 SAE H2E: Testing option to report extra rejected groups
"SET extra_sae_rejected_groups <groups>" can now be used to enable test
mode in which wpa_supplicant will report additional groups (configured
as space separated integers) when using SAE H2E.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:26:13 +02:00
Jouni Malinen
405946d76a SAE: Testing option to ignore H2E requirement mismatch
"SET ignore_sae_h2e_only 1" can now be used to configurate
wpa_supplicant to a test mode where it ignores AP's H2E-required
advertisement and try to connect with hunt-and-pecking loop instead.
This is used only for testing AP behavior with unexpected STA behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-06 17:13:59 +02:00
Jouni Malinen
e780b4bf20 DPP: Bootstrapping via NFC URI Record
This extends hostapd and wpa_supplicant DPP implementation to allow the
bootstrapping URI to be generated for and parsed from an NFC Tag with an
NFC URI Record. This is similar to the way the bootstrapping URI is used
with QR Code for unidirectional authentication.

The DPP_BOOTSTRAP_GEN command uses "type=nfc-uri" to request the URI to
be assigned for NFC URI Record. In practice, the URI is generated
identically to the QR Code case, but the internal entry maintains the
NFC-URI type.

A new command "DPP_NFC_URI <uri>" can now be used to parse the URI read
from an NFC Tag with the NFC URI Record. This is similar to the
DPP_QR_CODE command.

Other commands (mainly, DPP_LISTEN and DPP_AUTH_INIT) are used for NFC
URI in the same way as they are used for QR Code.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 12:37:51 +02:00
Jouni Malinen
181bf93363 DPP2: Report received ssid_charset as DPP-CONFOBJ-SSID-CHARSET event
This provides the SSID character set, if specified, to upper layers on
station Enrollee.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-28 16:39:09 +02:00
Jouni Malinen
8e5e36a184 Clean up base64_{encode,decode} pointer types
Allow any pointer to be used as source for encoding and use char * as
the return value from encoding and input value for decoding to reduce
number of type casts needed in the callers.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-28 16:39:09 +02:00
Purushottam Kushwaha
783a99b73d HS2.0: Skip check for roaming_consortium for NAI realm query
Previously ANQP fetch considered NAI realm query only when cred block
did not specify roaming_consortium to optimize ANQP operations (NAI
realm list can have a very long value). In certain cases, both NAI realm
and roaming_consortium are configured in credential block and this
resulted in ANQP fetch for NAI realm not being initiated. That could
result in not being able to select the highest priority available
credential/network.

Remove roaming_consortium check for NAI realm query inclusion in ANQP
request so that we will request NAI realm information whenever it can
result in matching additional networks. This makes the ANQP queries more
costly in some cases, but the additional information is needed for
correct behavior in network selection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-17 21:04:38 +02:00
Eric Caruso
9fde146070 Allow scans triggered by D-Bus to use MAC address randomization
wpas_dbus_handler_scan() constructs a set of 'params' each time, but it
doesn't acknowledge the existing randomization settings when doing so.
That means that any D-Bus initiated scans weren't going to follow the
configured settings.

Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-10-27 19:50:22 +02:00
Eric Caruso
10f8351d6e D-Bus: Add MAC address randomization endpoints
Add D-Bus property:
* MACAddressRandomizationMask: a{say}

which configure random MAC address functionality in the Wi-Fi
driver via netlink.

Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-10-27 19:50:22 +02:00
Eric Caruso
bb66d46758 Move ownership of MAC address randomization mask to scan params
This array can be freed either from the scan parameters or from
clearing the MAC address randomization parameters from the
wpa_supplicant struct. To make this ownership more clear, we have
each struct own its own copy of the parameters.

Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-10-27 19:50:22 +02:00
Jouni Malinen
6c2f70cc6a DPP: Mention ssid and pass parameters for DPP_AUTH_INIT in documentation
These parameter use hexdump values over the control interface, so
mention them in the DPP example documentation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-10-27 19:50:22 +02:00
Beniamino Galvani
7800725afb dbus: Export OWE capability and OWE BSS key_mgmt
Export a new 'owe' capability to indicate that wpa_supplicant was
built with OWE support and accepts 'key_mgmt=OWE'. Also, support 'owe'
in the array of BSS' available key managements.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2019-10-27 15:44:34 +02:00
Davide Caratti
b2ad4e6b24 D-Bus: Fix P2P NULL dereference after interface removal
When the P2P management interface is deleted, P2P is then disabled and
global->p2p_init_wpa_s is set to NULL. After that, other interfaces can
still trigger P2P functions (like wpas_p2p_find()) using D-Bus. This
makes wpa_supplicant terminate with SIGSEGV, because it dereferences a
NULL pointer. Fix this by adding proper checks, like it's done with
wpa_cli.

CC: Beniamino Galvani <bgalvani@redhat.com>
CC: Benjamin Berg <benjamin@sipsolutions.net>
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2019-10-27 15:40:15 +02:00
Jouni Malinen
1b5865a53f SAE: Ignore commit message when waiting for confirm in STA mode
Previously, an unexpected SAE commit message resulted in forcing
disconnection. While that allowed recovery by starting from scratch,
this is not really necessary. Ignore such unexpected SAE commit message
instead and allow SAE confirm message to be processed after this. This
is somewhat more robust way of handling the cases where SAE commit
message might be retransmitted either in STA->AP or AP->STA direction.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-10-27 14:35:04 +02:00
Jouni Malinen
50a2c8c906 Do not indicate possible PSK failure when using SAE
wpa_key_mgmt_wpa_psk() includes SAE AKMs. However, with SAE, there is no
way of reaching 4-way handshake without the password having already been
verified as part of SAE authentication. As such, a failure to complete
4-way handshake with SAE cannot indicate that the used password was
incorrect.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-10-27 12:54:40 +02:00
Jesus Fernandez Manzano
305369038b wpa_supplicant: Fix arithmetic on void pointer
When using void pointers in calculations, the behavior is undefined.
Arithmetic operations on 'void *' is a GNU C extension,
which defines the 'sizeof(void)' to be 1.

This change improves portability of the code.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2019-10-25 19:29:53 +03:00
Masashi Honma
b38c8c9cb2 dbus: Suppress to show NULL string
wpa_s->dbus_groupobj_path is always NULL so suppress to show it.
This was found by gcc 9.2.1 warning.

dbus/dbus_new.c: In function ‘wpas_dbus_unregister_p2p_group’:
dbus/dbus_new.c:4793:3: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
 4793 |   wpa_printf(MSG_DEBUG,
      |   ^~~~~~~~~~~~~~~~~~~~~
 4794 |       "%s: Group object '%s' already unregistered",
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 4795 |       __func__, wpa_s->dbus_groupobj_path);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-10-25 16:03:37 +03:00
Masashi Honma
6807eee9ca Interworking: Check NULL string to avoid compiler warning
Fix warning by gcc 9.2.1.

interworking.c: In function ‘interworking_home_sp_cred’:
interworking.c:2263:3: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
 2263 |   wpa_msg(wpa_s, MSG_DEBUG,
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~
 2264 |    "Interworking: Search for match with SIM/USIM domain %s",
      |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2265 |    realm);
      |    ~~~~~~

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-10-25 16:03:37 +03:00
Phil Wise
ec1c0d1548 Fix name of DBus interface in defconfig
Signed-off-by: Phil Wise <phil@phil-wise.com>
2019-10-25 16:03:37 +03:00
Jouni Malinen
d3516cad7a Store a copy of Association Request RSNXE in AP mode for later use
This is needed to be able to compare the received RSNXE to a protected
version in EAPOL-Key msg 2/4.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 00:20:29 +03:00
Jouni Malinen
6d6c887751 SAE: Add RSNXE in Association Request and EAPOL-Key msg 2/4
Add the new RSNXE into (Re)Association Request frames and EAPOL-Key msg
2/4 when using SAE with hash-to-element mechanism enabled. This allows
the AP to verify that there was no downgrade attack when both PWE
derivation mechanisms are enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-17 16:54:05 +03:00
Dedy Lansky
cdb5774f42 FST: Update FST about MAC address change
Notify FST module upon MAC address change. FST module will update the
Multiband IE accordingly.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
89450024a8 wpa_supplicant: Pass in operating class for channel validity checks
This is needed to allow the 6 GHz operating classes to be compared
against the driver support channels since the channel numbers are not
really unique identifiers of a channel even within a single band.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
444d76f74f SAE: Check that peer's rejected groups are not enabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cfe1ea5c9c SAE: H2E version of SAE commit message handling for STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
447cd5f2df SAE: Collect list of rejected groups for H2E in STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
146889e3ca RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4
If the AP advertises RSN Extension element, it has to be advertised
consistently in the unprotected (Beacon and Probe Response) and
protected (EAPOL-Key msg 3/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
293a01f3b3 SAE: Handle BSS membership selector indication for H2E-only in STA mode
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
86f6084862 SAE: Tell sae_parse_commit() whether H2E is used
This will be needed to help parsing the received SAE commit.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
d6a7de60c8 wpa_cli: Clean up unnecessarily complex CONFIG_MESH use
There is no need for #ifdef/#else/#endif construction in
network_fields[] to cover "mode" (which is completely independent of
CONFIG_MESH) or two separate conditional blocks for mesh related network
fields, so move these into a single conditionally included block.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
8b426ab1e7 wpa_supplicant: Pass AP mode EDMG config to hostapd struct
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00