Commit graph

1442 commits

Author SHA1 Message Date
Jouni Malinen
b1f487cb74 tests: Try heavier SAE groups in sae_groups
This changes the sae_groups test case design to try with every group and
skip triggering test failure for the heavier ones that are likely to
fail in some VM setups under load. This provides more testing coverage
by not limiting the test based on lowest common setup.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:07 +03:00
Jouni Malinen
33dcced589 tests: SAE with number of different passwords
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-24 21:07:18 +03:00
Jouni Malinen
1965e1965e tests: SAE anti clogging protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
939527b59d tests: SAE reflection attack
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
d5479878b8 tests: HT40 co-ex scan conflict (HT40-)
This verifies a case where the neighboring BSS is at the other end of
the band and has its PRI channel further away.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 11:25:22 +03:00
Jouni Malinen
24f4ad04f7 tests: Use different channel offset for the second 160 MHz VHT AP
This increases testing coverage a bit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:42:17 +03:00
Jouni Malinen
5161ea8e30 tests: VHT 80 MHz with different HT40 channel options
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:30:24 +03:00
Jouni Malinen
5527a3911a tests: SAE protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-22 00:04:09 +03:00
Jouni Malinen
80dcede592 tests: HT40 co-ex scan and other BSS not affected
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-21 22:27:34 +03:00
Jouni Malinen
eb6d353270 tests: SAE and OOM in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:31:12 +03:00
Jouni Malinen
6e3ee4c532 tests: Suite B with external RADIUS server
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
d9e2a057c8 tests: D-Bus AddNetwork and connection with WPA+WPA2-Enterprise AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
4b0e0c53fc tests: WPA IE parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
1275208c82 tests: Update wpas_ctrl_network to match removal of WEP as group cipher
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
664093b55b tests: WPA2-PSK-FT AP and invalid response IEs
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 18:04:50 +03:00
Jouni Malinen
50a19b0107 tests: HT40 co-ex scan finding an AP advertising 40 MHz intolerant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:16:11 +03:00
Jouni Malinen
f0b347b615 tests: HT40 co-ex scan conflict with HT 20 MHz AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:02:53 +03:00
Jouni Malinen
97e4688b2f tests: HT40 on 5 GHz with invalid channel pair
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 15:51:41 +03:00
Jouni Malinen
5ce2a9ac50 tests: Make dbus_old_wps_pbc more robust
Flush the cfg80211 scan cache explicitly to avoid false failure reports
if a BSS entry from an earlier test case remain. Such a failure could be
hit, e.g., with the following test case sequence:
wpas_mesh_mode_scan p2p_channel_random_social dbus_old_wps_pbc

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 15:35:52 +03:00
Jouni Malinen
81f8e7e9fb tests: Increase HTTPConnection timeout in ap_wps_upnp_http_proto
It looks like the previous timeout of 0.1 seconds could be hit under
parallel VM load, so double this to 0.2 second to avoid hitting
unnecessary test failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 13:45:16 +03:00
Jouni Malinen
001c4bf5b3 tests: D-Bus RemoveClient()
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 13:07:03 +03:00
Ben Rosenfeld
2e96aef298 tests: Wait on the global control interface for CTRL-EVENT-REGDOM-CHANGE
The event is not interface specific, so wait for it on the global
control interface socket.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 11:31:53 +03:00
Avraham Stern
99b83d0abd tests: Fix grpform_wait_peer group removal in P2P Device case
Get the P2P group interface name so it will be used for group removal to
support configurations that use a dedicated P2P Device interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-06-19 11:28:20 +03:00
Avraham Stern
c340e0e8f4 tests: Fix p2p_set_discoverability waiting for CTRL-EVENT-CONNECTED
Wait on the group control interface to support configurations that
use a dedicated P2P Device interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-06-19 11:27:15 +03:00
Ilan Peer
bab3191718 tests: Fix wifi_display to use the global control interface
This is needed if the configuration is using a dedicated P2P Device
interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:14:30 +03:00
Ilan Peer
063006328a tests: Fix wifi_display_persistent_group with P2P Device
Use the global control interface to list the P2P Device persistent
networks. Get and parse the P2P-GROUP-STARTED events, so later the
interface names would be available for the connectivity test etc. Both
of these are required when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:12:33 +03:00
Ilan Peer
5590d2ecd1 tests: Fix autogo_pbc() waiting for WPS-PBC
Wait on the global control interface to support
configurations that use a dedicated P2P Device interface.

Note that the group interface cannot be used, as the group
interface name is not saved since no group was created.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:59:01 +03:00
Ilan Peer
c0b57b241a tests: Use global and group control interface in test_p2p_autogo
This is required when a dedicated P2P Device is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:46:17 +03:00
Ilan Peer
a2168cf476 tests: Modify reset() to use the global control interface
Change the reset() method to use the global control interface
for resetting P2P state and also add a call to P2P_FLUSH.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:38:22 +03:00
Ben Rosenfeld
0208e8329d tests: Use global interface for "P2P_SET"
Setting P2P per_sta_psk should be done using the global control
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 10:37:08 +03:00
Jouni Malinen
31bd8ea2e9 tests: NFC static handover with invalid contents
This adds test coverage to p2p_procesS_nfc_connection_handover() error
paths. This is also a regression test case for a memory leak on two of
these error paths.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 01:23:24 +03:00
Jouni Malinen
27f2fab021 tests: WPA2-Enterprise connection using EAP-FAST and OOM in PRF
This is a regression test case for a memory leak on a TLS PRF error
path. In addition, this provides more coverage for this error path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 01:23:24 +03:00
Jouni Malinen
0b5740fdef tests: More RADIUS testing coverage with CUI/User-Name in ACL response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 00:23:49 +03:00
Jouni Malinen
e51c8b2e97 tests: Make ap_wps_ap_scan_2 more robust
The test sequence "scan_and_bss_entry_removed ap_wps_ap_scan_2" resulted
in failure due to an old BSS entry remaining from the first test case to
the second and the WPS_PBC operation on a forced BSSID ending up picking
the incorrect BSS entry. Make this more robust by clearing the scan
results from cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 22:33:48 +03:00
Jouni Malinen
492c3a9180 tests: Make ap_wps_pbc_overlap_2* less likely to cause issues
Both of these test cases were leaving out BSS entries with active PBC
mode at the end of the test. This could result in the next text case
failing, e.g., in "ap_wps_pbc_overlap_2ap grpform_ext_listen" and
"ap_wps_pbc_overlap_2sta grpform_ext_listen" sequences. Fix this by
flushing the scan results more carefully at the end of the PBC overlap
test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 22:29:14 +03:00
Jouni Malinen
9f622398e4 tests: Print a command line to re-run failed test sequence
This makes it easier to test whether a specific test sequence results in
a reproducible test failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 21:39:24 +03:00
Jouni Malinen
7242b3df37 tests: P2PS with large number of services in Probe Request/Response
This verifies capability to split the response into multiple P2P
elements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
3d7d9f18db tests: Extend P2PS service seek test to cover multiple services
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Max Stepanov
5a2c379736 tests: P2PS wildcard SD probe
Verify that advertiser returns 'org.wi-fi.wfds' wildcard in a Probe
Response frame if at least one P2PS advertisement is present.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
866eb800e5 tests: VENDOR_ELEM_ADD for various frames
This increases testing coverage for VENDOR_ELEM mechanism by explicitly
verifying that the requested element gets added to each of the supported
frame types.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-15 14:16:30 +03:00
Andrei Otcheretianski
a4c4c1d0e4 tests: Add p2ps_cli_probe and p2ps_go_probe tests
Test P2PS GO and CLI discoverability on group operating channel.
In order to implement these tests, refactor p2ps_connect_p2ps_method
and test_p2ps_connect_adv_go_pin_method to reuse the code for
connection establishment. Also change p2ps_exact_seek so it will
allow getting Probe Response frames from several peers.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
d134a2868e tests: Fix inconsistent indentation
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
ce394d33e7 tests: Fix p2ps_connect_adv_go_pin_method case
test_p2ps_connect_adv_go_pin_method() expects that
p2ps_provision_keypad_method() returns P2PS-PROV-DONE with details
needed for a connection. However, this event was overridden which
resulted in an incorrect test flow skipping the connection
establishement. The test would pass, however, without really trying to
connect. Fix this by returning the correct event.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Jouni Malinen
dd025790e5 tests: IBSS on 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 19:35:19 +03:00
Jouni Malinen
8cc9bc0775 tests: WNM BSS Transition Management in different countries
This increases testing coverage for ieee802_chan_to_freq*() functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 18:11:14 +03:00
Jouni Malinen
6d01255e57 tests: GAS/ANQP query and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:17:33 +03:00
Michael Braun
54cf411f4c tests: Verify correct VLAN operation in multi-BSS multi-VLAN case
This adds hwsim test ap_vlan_iface_cleanup_multibss. It connects two
stations in different BSS but the same hostapd process. First both
stations are in VLAN 1, then they get reauthenticated into VLAN 2. Due
to the ordering of the stations moving around, this test checks that
bridge and tagged interface referencing counting is done globally, such
that the tagged interface is not removed too early and no bridge is
left over.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-06-14 13:40:50 +03:00
Jouni Malinen
13b3497245 tests: D-Bus Reconnect command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 11:38:14 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Jouni Malinen
ee19ba74cd tests: P2P GO and 5 GHz channels 165 (allowed) and 169 (disallowed) in US
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 20:54:01 +03:00