Commit graph

384 commits

Author SHA1 Message Date
Masashi Honma
f1b0de09d9 WPS: Fix CONFIG_WPS=y compilation of wpa_supplicant
The wpa_supplicant compilation failed with CONFIG_WPS=y option
if CONFIG_CLIENT_MLME and CONFIG_IEEE80211R are not used.
2009-09-14 16:50:53 +03:00
Jouni Malinen
8bac466b00 Add wpa_supplicant notification calls
This introduces a new mechanism for collecting notification calls into
a single place (notify.c). As a result of this, most of the
wpa_supplicant code does not need to know about dbus (etc. mechanisms
that could use the notifications). Some empty placeholder functions are
also added in preparation of new dbus code that needs more event
notifications.
2009-09-13 20:53:32 +03:00
Jouni Malinen
e653b62275 Add station table query to wpa_supplicant AP ctrl_iface
"wpa_cli all_sta" and "wpa_cli sta <addr>" can now be used to fetch
information about stations associated with the
wpa_supplicant-controlled AP.
2009-09-08 12:58:02 +03:00
Jouni Malinen
7cba52d852 Use OpenSSL for RC4 instead of internal implementation 2009-08-16 22:26:13 +03:00
Jouni Malinen
ac73690c06 Move RC4 into crypto.h as a replaceable crypto function
This allows crypto library wrappers to override the internal RC4
implementation in the same way as can already be done for other crypto
algorithms.
2009-08-16 20:13:14 +03:00
Jouni Malinen
577072b116 Fix FIPS mode build of eapol_test 2009-08-16 19:00:49 +03:00
Jouni Malinen
ff916b9df7 Allow non-FIPS MD5 to be used with TLS PRF even in FIPS mode
This is allowed per FIPS1402IG.pdf since the TLS PRF depends fully on
both MD5 and SHA-1.
2009-08-16 18:56:48 +03:00
Jouni Malinen
76f04b38b0 Preliminary support for FIPS mode operation with OpenSSL
wpa_supplicant can now be built with FIPS capable OpenSSL for FIPS mode
operation. Currently, this is only enabling the FIPS mode in OpenSSL
without providing any higher level enforcement in wpa_supplicant.
Consequently, invalid configuration will fail during the authentication
run. Proper configuration (e.g., WPA2-Enterprise with EAP-TLS) allows
the connection to be completed.
2009-08-16 14:24:22 +03:00
Jouni Malinen
1430ba9b7e OpenSSL: Use library version of SHA256
There is no need to use the internal SHA256 implementation when using
OpenSSL.
2009-08-16 14:15:36 +03:00
Bjarke Istrup Pedersen
466940c55e Use LDFLAGS in all linker commands
When building hostapd and wpa_supplicant, the build system does not
respect the LDFLAGS selected in the environment in some cases. [Bug 311]
2009-08-16 09:47:56 +03:00
Jouni Malinen
ba30964b60 Force rebuilding of src/drivers between hostapd and wpa_supplicant
This is a (hopefully) temporary workaround to allow the same source code
tree to be used for building hostapd and wpa_supplicant without having
to manually force recompilation of some files. Currently, some of the
driver wrapper files need to be built separately for hostapd and
wpa_supplicant (#ifdef's in the files based on AP functionality).

This is somewhat racy as far as parallel make execution is concerned,
i.e., it may be necessary to run "make -j#" twice (plain "make" works
fine. Since this is supposed to be a temporary workaround, there is not
much point in trying to fix this with any more complex make processing.
2009-08-14 20:40:37 +03:00
Johannes Berg
fe6bdb777e Replace NEED_MLME with NEED_AP_MLME
This makes it clearer that it's about the AP, not client-side MLME, even
when built into the client (wpa_supplicant).
2009-08-14 20:01:41 +03:00
Johannes Berg
e7cd16cac5 Create a common drivers makefile snippet
Instead of having all driver stuff collected across wpa_supplicant
and hostapd, create a common snippet that they both include and
that handles the build configuration.
2009-08-14 19:53:27 +03:00
Jouni Malinen
3e91d24260 wpa_passphrase does not need FIPS PRF, MD4, or AES extra functionality 2009-08-13 17:07:36 +03:00
Johannes Berg
4c9e03e0b2 Crypto build cleanup: remove CONFIG_NO_AES_*
Instead of using a defines and conditional building of AES parts,
move the conditional functionality into separate files.
2009-08-13 11:40:28 +03:00
Johannes Berg
27da6d4a0e Crypto build cleanup: remove CONFIG_NO_AES_ENCRYPT
Instead of using a define and conditional building of AES parts,
move the AES encryption routines into a separate file.
2009-08-13 11:21:32 +03:00
Johannes Berg
381fcbc9f4 Crypto build cleanup: remove CONFIG_NO_AES_DECRYPT
Instead of using a define and conditional building of AES parts,
move the AES decryption routines into a separate file.
2009-08-13 11:16:21 +03:00
Johannes Berg
18abe7acb0 Crypto build cleanup: remove CONFIG_NO_PBKDF2
Instead of using a define and conditional building of sha1.c parts,
move the PBKDF2 implementation into a separate file.
2009-08-11 20:31:39 +03:00
Johannes Berg
d9feab18fc Crypto build cleanup: remove CONFIG_NO_TLS_PRF
Instead of using a define and conditional building of sha1.c parts,
move the TLS PRF implementation into a separate file.
2009-08-11 20:24:06 +03:00
Johannes Berg
6f693b5d0b Crypto build cleanup: remove CONFIG_NO_T_PRF
Instead of using a define and conditional building of sha1.c parts,
move the T-PRF implementation into a separate file.
2009-08-11 20:19:37 +03:00
Johannes Berg
05edfe2994 Crypto build cleanup: remove NEED_FIPS186_2_PRF
Instead of using a define and conditional building of crypto wrapper
parts, move the FIPS 186-2 PRF implementation into separate files.
2009-08-11 20:06:23 +03:00
Johannes Berg
ad01a5315e Crypto build cleanup: remove INTERNAL_MD5
Instead of using a define and conditional building of md5.c parts,
move the internal-MD5 into a separate file.
2009-07-28 21:36:13 +03:00
Johannes Berg
bd4e28950d Crypto build cleanup: remove INTERNAL_MD4
In addition, rename md4.c to md4-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:27:02 +03:00
Johannes Berg
598a792d8c Crypto build cleanup: remove INTERNAL_SHA256
Instead of using a define and conditional building of sha256.c parts,
move the internal-SHA256 into a separate file.
2009-07-28 21:20:04 +03:00
Johannes Berg
246157cba6 Crypto build cleanup: remove INTERNAL_AES
In addition, rename aes.c to aes-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:09:57 +03:00
Johannes Berg
657f038102 Crypto build cleanup: remove INTERNAL_DES
In addition, rename des.c to des-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:00:44 +03:00
Johannes Berg
928a50a355 Crypto build cleanup: remove INTERNAL_SHA1
Instead of using a define and conditional building of sha1.c parts,
move the internal-SHA-1 into a separate file.
2009-07-28 20:47:04 +03:00
Johannes Berg
602606091b CONFIG_WIRELESS_EXTENSION need not be in CFLAGS 2009-07-28 20:25:19 +03:00
Johannes Berg
91382de4d1 CONFIG_WIRELESS_EXTENSION is purely internal to the Makefile 2009-07-28 14:41:33 +03:00
Johannes Berg
b2840aafaf make the build process quieter to see warnings 2009-07-28 14:37:40 +03:00
Johannes Berg
8055fb781d Clean up some more binaries in wpa_supplicant 'make clean' 2009-07-28 14:15:04 +03:00
Jon Loeliger
2e8eac2d67 Allow wpa_supplicant to use libnl-2.0
Change existing CONFIG_LIBNL20 compatibility code in
driver_nl80211.c to be used by both wpa_supplicant
and hostapd, but take care of nl_handle too now.

Propagate CONFIG_LIBNL20 out of .config file and onto
CFLAGS in the Makefile.

Use libnl-gen now too.

Signed-off-by: Jon Loeliger <jdl@bigfootnetworks.com>
---
2009-07-25 17:21:52 +03:00
Jouni Malinen
2d5b792d2b Add preliminary hostapd data structure initialization for AP mode
wpa_supplicant can now initialize hostapd data structures when mode=2 is
used to set up an AP. The hostapd configuration is not yet set based on
wpa_supplicant network configuration block. In addition, the glue code
for hostapd driver_ops needs number of functions that will be needed for
AP functionality.
2009-03-26 20:37:05 +02:00
Jouni Malinen
f1a4871084 Link in AP functionality from hostapd when CONFIG_AP=y
This is only allowing the code to be compiled and linked in; the actual
functionality is not yet enabled.
2009-03-25 12:23:42 +02:00
Jouni Malinen
1581b38b67 Initial step in adding simple AP mode support into wpa_supplicant
This version is adding the configuration option (mode=2) for this and
driver capability reporting to figure out whether AP mode can be used.
However, this does not actually implement any real functionality yet.
2009-03-25 11:38:47 +02:00
Jouni Malinen
7d737d6bf9 Fix FreeBSD build by not adding -ldl
Unlike Linux, FreeBSD does not use libdl.
2009-03-21 20:59:07 +02:00
Jouni Malinen
26c9d7ea24 Fix IEEE 802.11r build without CONFIG_CLIENT_MLME 2009-03-21 20:57:21 +02:00
Jouni Malinen
c2a0407851 Add SME support (separate authentication and association)
This can be used, e.g., with mac80211-based Linux drivers with
nl80211. This allows over-the-air FT protocol to be used (IEEE
802.11r).

Since the nl80211 interface needed for this is very recent (added
today  into wireless-testing.git), driver_nl80211.c has backwards
compatibility code that uses WEXT for association if the kernel does
not support the new commands. This compatibility code can be
disabled by defining NO_WEXT_COMPAT. That code will also be removed
at  some point to clean up driver_nl80211.c.
2009-03-20 22:26:41 +02:00
Jouni Malinen
58d1f6d189 Fix EAP-FAST only build to include the needed EAPOL implementation 2009-03-08 11:29:31 +02:00
Jouni Malinen
9cf548c082 Allow PN531_PATH to be overriden from .config 2009-03-06 16:25:48 +02:00
Masashi Honma
e1ee6b600b WPS: Add support for NFC out-of-band mechanism
The new file wps_nfc.c and ndef.c implements NFC device independent
operation, wps_nfc_pn531.c implements NFC device dependent operation.

This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following NFC methods can be used:
- Enrollee PIN with NFC
- Registrar PIN with NFC
- unencrypted credential with NFC

Encrypted credentials are not supported.

Enrollee side operation:

Registrar side operation:

Example configuration.
CONFIG_WPS=y
CONFIG_WPS_NFC=y
CONFIG_WPS_NFC_PN531=y

I used NFC device "NXP PN531". The NFC device access method is
confidential, so I used outer library. Please download below files from
https://www.saice-wpsnfc.bz/index.php

[WPS NFC Library]
WpsNfcLibrary/WpsNfc.h
WpsNfcLibrary/WpsNfcType.h
WpsNfcLibrary/WpsNfcVersion.h
WpsNfcLibrary/linux/libnfc_mapping_pn53x.dll
WpsNfcLibrary/linux/wpsnfc.dll

[NFC Reader/Writer Kernel Driver]
NFCKernelDriver-1.0.3/linux/kobj/sonyrw.ko

<WiFi test>
The hostapd/wpa_supplicant with this patch passed below tests on
"Wi-Fi WPS Test Plan Version 1.6".
4.2.5 Add device using NFC Method with password token
(I used SONY STA instead of NXP STA.)

4.2.6 Add device using NFC Method with configuration token

5.1.9 Add to AP using NFC Method with password token
through internal registrar
(I used SONY AP instead of NXP AP.)

5.1.10 Add to AP using NFC Method with configuration token
through internal registrar
2009-03-06 16:16:22 +02:00
Jouni Malinen
049a292f89 Fix builds that need SHA256 or mod_exp, but not TLS functions 2009-02-27 17:46:40 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Jouni Malinen
390cd3105d WPS UFD: Make build conditional on CONFIG_WPS_UFD=y
Not all embedded devices have USB interface and it is useful to be able
to remove unneeded functionality from the binary. In addition, the
current implementation has some UNIX specific calls in it which may make
it not compile cleanly on all target systems.
2009-02-26 22:01:36 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Daniel Mierswa
d94d4bafbb Improved 'make install' (use BINDIR/LIBDIR, install shared objects) 2009-02-15 14:22:50 +02:00
Jouni Malinen
4225097c5a Fix test-sha256 build 2009-02-10 14:31:27 +02:00
Jouni Malinen
53c256a476 Fix MinGW build with CONFIG_EAP_TNC=y
MinGW does not use -ldl so do not add this unconditionally.
2009-02-08 12:47:28 +02:00
Daniel Mierswa
716d543d5c Include wpabuf.o in wpa_priv build
If you choose to use CONFIG_PRIVSEP=y, the wpabuf functions seem to
miss. The attached patch is against trunk and should probably fix it.
2009-02-07 10:19:28 +02:00
Jouni Malinen
6dbcd00912 Removed CONFIG_EAP_WSC=dyn option
Build EAP-WSC dynamically does not make much sense and with the
dependencies to WPS code from number of places resolving this is not
trivial. It is simpler to just remove this option.
2009-02-07 10:09:49 +02:00
Pavel Roskin
4c2660c2b0 Fix building dynamic EAP peer modules
Strip directory name from the target in the pattern rule for dynamic
modules.  Remove dynamic modules on "make clean".
2009-02-07 10:05:23 +02:00
Jouni Malinen
e1c7954d5d Added CONFIG_WPS_UPNP for wpa_supplicant tests
For now, this is just an undocumented build option to make it possible
to build ../src/wps/*.o in a way that matches with hostapd needs.
2009-02-06 13:52:30 +02:00
Daniel Mierswa
b77eab282a Explicitly link against libdl when including TNC support
If you don't choose OpenSSL as TLS implementation and choose to enable
CONFIG_EAP_TNC you have to link against libdl. The OpenSSL libraries
implicitly link against them, so this might be a reason why it wasn't
noticed yet. I assume the same applies to hostapd.
2009-02-05 19:24:16 +02:00
Jouni Malinen
a7baefda28 Fixed eapol_test linking with CONFIG_IBSS_RSN=y 2009-02-05 18:20:26 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00
Jouni Malinen
93ea8ed034 Partial fix for test_wpa build 2009-01-13 19:37:22 +02:00
Jouni Malinen
76e2592190 Share the same radiotap helper implementation 2009-01-09 15:22:19 +02:00
Jouni Malinen
d953d9ab80 Removed sparse destinations since "CC=cgcc make" works fine 2009-01-03 20:39:52 +02:00
Jouni Malinen
875f6d7b93 Create all doxygen docs from root directory to get proper path names
This updated all doxygen runs to use the same style that was used for
wpa_supplicant full documents. The full vs. fast configurations are now
otherwise identical apart from fast not generating dot files or
latex/pdf version of the documentation.
2009-01-03 09:59:12 +02:00
Andriy Tkachuk
d9f5626293 NEED_BASE64 for WPS
It looks like we need base64 routines when compiling WPS in hostapd
(used in src/wps/wps_registrar.c:910).
2008-12-26 16:40:27 +02:00
Jouni Malinen
1edb9533f1 SHA256 is needed for EAP-AKA' and WPS 2008-12-11 00:48:13 +02:00
Jouni Malinen
a9d1364c5f Merged EAP-AKA' into eap_aka.c and added it to defconfig/ChangeLog 2008-12-07 19:24:56 +02:00
Jouni Malinen
8c37556cd1 Add a starting point for EAP-AKA' (draft-arkko-eap-aka-kdf-10)
This is just making an as-is copy of EAP-AKA server and peer
implementation into a new file and by using the different EAP method
type that is allocated for EAP-AKA' (50). None of the other differences
between EAP-AKA and EAP-AKA' are not yet included.

It is likely that once EAP-AKA' implementation is done and is found to
work correctly, large part of the EAP-AKA and EAP-AKA' code will be
shared. However, it is not reasonable to destabilize EAP-AKA
implementation at this point before it is clearer what the final
differences will be.
2008-12-02 20:12:49 +02:00
Jouni Malinen
7d7b8e960a WPS: Split wps_common.c into parts
To make it easier to find various functions, attribute functions were
split into wps_attr_{build,parse,process}.c.
2008-11-29 13:16:26 +02:00
Jouni Malinen
fa201b694f WPS: Move WPS glue code from wpas_glue.c to wps_supplicant.c
This cleans up the internal interface between different modules and is
the first step in getting wpa_supplicant design closer to hostapd as far
as WPS is concerned.
2008-11-28 19:46:22 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouke Witteveen
e519314ee9 Add RoboSwitch driver interface for wpa_supplicant
Find attached the patch that creates a new driver: roboswitch. This
driver adds support for wired authentication with a Broadcom
RoboSwitch chipset. For example it is now possible to do wired
authentication with a Linksys WRT54G router running OpenWRT.

LIMITATIONS
- At the moment the driver does not support the BCM5365 series (though
adding it requires just some register tweaks).
- The driver is also limited to Linux (this is a far more technical
restriction).
- In order to compile against a 2.4 series you need to edit
include/linux/mii.h and change all references to "u16" in "__u16". I
have submitted a patch upstream that will fix this in a future version
of the 2.4 kernel. [These modifications (and more) are now included in
the kernel source and can be found in versions 2.4.37-rc2 and up.]

USAGE
- Usage is similar to the wired driver. Choose the interfacename of
the vlan that contains your desired authentication port on the router.
This name must be formatted as <interface>.<vlan>, which is the
default on all systems I know.
2008-11-18 16:30:32 +02:00
Jouni Malinen
46690a3b9b Added an optional mitigation mechanism for certain attacks against TKIP by
delaying Michael MIC error reports by a random amount of time between 0 and
60 seconds if multiple Michael MIC failures are detected with the same PTK
(i.e., the Authenticator does not rekey PTK on first failure report). This
is disabled by default and can be enabled with a build option
CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config.

This may help in making a chopchop attack take much longer time by forcing
the attacker to wait 60 seconds before knowing whether a modified frame
resulted in a MIC failure.
2008-11-08 04:43:12 +02:00
Jouni Malinen
81eec387dd Added Milenage-GSM simulator for EAP-SIM
CONFIG_SIM_SIMULATOR=y in .config and password="Ki:OPc" in network config
to enable.
2008-11-06 04:21:32 +02:00
Jouni Malinen
2a24bb3199 Added Milenage USIM emulator for EAP-AKA (can be used to simulate test
USIM card with a known private key; enable with CONFIG_USIM_SIMULATOR in
.config and password="Ki:OPc:SQN" in network configuration).
2008-11-05 23:02:13 +02:00
Jouni Malinen
1add3c3387 Use the common ieee802_11_parse_elems() implementations for mlme.c 2008-10-29 21:57:01 +02:00
Jouni Malinen
1d8ce433c9 Internal X.509/TLSv1: Support SHA-256 in X.509 certificate digest 2008-08-16 11:21:22 +03:00
Jouni Malinen
1c8735848d nl80211: Preliminary code for usermode MLME support
This adds some parts needed to use usermode MLME with the current mac80211
(plus a patch to add a new cfg80211 command; not yet submitted to
wireless-testing). This version creates a monitor interface for management
frames and is able to send Probe Request frames during scan. However, it
looks like management frame reception is not yet working properly. In
addition, mlme_{add,remove}_sta() handlers are still missing.
2008-08-15 22:14:49 +03:00
Jouni Malinen
6724f4d07a Fixed MinGW build without CONFIG_NDIS_EVENTS_INTEGRATED defined 2008-08-10 18:11:41 +03:00
Jouni Malinen
2eeaa5c9d0 EAP-PEAP: Moved the common peap_prfplus() function into a shared file 2008-06-09 10:32:12 +03:00
Jouni Malinen
3f5285e852 Added a preliminary nl80211/cfg80211 driver interface for wpa_supplicant
driver_nl80211.c is based on driver_wext.c and it is still using Linux
wireless extensions for many functions. Over time, the new driver interface
code should be modified to use nl80211/cfg80211 for everything.
2008-06-06 16:55:42 +03:00
Jouni Malinen
b95394c66f Combined internal LibTomMath configuration into one option
CONFIG_INTERNAL_LIBTOMMATH_FAST=y in .config can now be used to enable all
optimized routines at a cost of about 4 kB. This is small enough increase
in size to justify simplified configuration.
2008-06-06 10:21:28 +03:00
Jouni Malinen
ec0205a87a Added an option to build internal LibTomMath with faster div routine
At the cost of about 1 kB of additional binary size, the internal
LibTomMath can be configured to include faster div routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_DIV=y in
.config.
2008-06-06 10:11:17 +03:00
Jouni Malinen
c5f5c91aeb Add faster, optional sqr routine for internal LibTomMath
At the cost of about 0.5 kB of additional binary size, the internal
LibTomMath can be configured to include faster sqr routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_SQR=y in
.config.
2008-06-05 18:33:46 +03:00
Jouni Malinen
8ccc0402b2 Internal LibTomMath: add optional support for Montgomery reduction
Add a cost of about 2.5 kB of additional cost, the internal LibTomMath can
be configured to include fast exptmod routine to speed up DH and RSA.
This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_EXPTMOD=y in
.config.
2008-06-04 11:57:55 +03:00
Jouni Malinen
0ac0e4df1c EAP-PEAP: Moved EAP-TLV processing into eap_peap.c
EAP-PEAP was the only method that used the external eap_tlv.c peer
implementation. This worked fine just for the simple protected result
notification, but extending the TLV support for cryptobinding etc. is not
trivial with such separation. With the TLV processing integrated into
eap_peap.c, all the needed information is now available for using
additional TLVs.
2008-03-18 11:26:17 +02:00
Masakazu Mokuno
b5a357b476 Add support for PS3 Linux wireless driver
This adds support for PS3 wireless to wpa_supplicant.

Although PS3 wireless driver is designed to conform the WEXT standard
as much as possible, unfortunately the wext driver wrapper of
wpa_supplicant can not support PS3 wireless fully because:

 - PS3 wireless driver uses private WEXT ioctls for accepting PSK of
   WPA-Personal from the userland.
   WEXT does not specify the way to do it.

 - The association and 4-way handshake are done by PS3 virtual
   wireless device. The guest OSes can not interfere it.

 - No EAPOL frames are allowed to go outside of the
   hypervisor/firmware nor come from. They are eaten by the firmware.

Thus I needed to make a new driver wrapper for PS3 wireless.

This patch can be applied against the latest 0.6.x tree.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-03-13 19:00:37 +02:00
Jouni Malinen
a4819630f6 EAP-FAST: Added shared helper functions for building TLVs 2008-02-27 17:56:30 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00