Commit graph

3698 commits

Author SHA1 Message Date
Purushottam Kushwaha
17d32eb3d3 Allow re-write of ip_addr* configurations to conf file.
This patch keeps ip_addr* configuration in conf file while
 updating supplicant conf file either internally by supplicant or
 due to save_config command.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2016-01-15 20:23:25 +02:00
Purushottam Kushwaha
bcce934755 dbus: Restrict DeviceName size to 32 characters in setter
The maximum WPS Device Name length is 32 characters and that limit was
already enforced for the control interface and configuration files.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2016-01-15 20:16:13 +02:00
Roy Marples
7c70fe2c6e Sort options and reduce printf calls in wpa_supplicant usage text
Signed-off-by: Roy Marples <roy@marples.name>
2016-01-15 20:11:54 +02:00
Jouni Malinen
1d20c66e45 P2P: Clear groups first on FLUSH command
This is needed to get proper P2P group removal processing for some test
cases. discovery_group_client followed by nfc_p2p_client was able to hit
a case where the P2P group idle timeout survived to the next group
instance because of the FLUSH command not clearing the group and this
timeout properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 18:49:15 +02:00
Jouni Malinen
27446e471c mesh: Do not force another peering exchange on driver event
If the local driver indicated a peer candidate event when the peer had
already initiated peering exchange in open mesh case, we used to force a
new exchange to be started instead of allowing the previously started
exchange to complete. This is not desirable, so make this initiation of
the new exchange conditional on there not being an already started (or
successfully completed) exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 17:50:15 +02:00
Jouni Malinen
cc64fe7b9e mesh: Do not clear link state on driver event if exchange was started
If the local driver event for a new peer candidate arrived only after
the peer had already initiated the peering exchange, we used to clear
the link state. This resulted in the already completed (or in progress)
exchange getting abandoned and a new exchange initiated. This is not
desirable since the already started (or even completed) exchange can be
used. Clear the link state only when adding the new STA entry for the
first time, i.e., use the same !sta->my_lid condition in handling the
driver event similarly to how the peer initiated cases were already
handled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 17:50:15 +02:00
Jouni Malinen
b5f5c32412 mesh: Add some more details to MPM debug messages
This makes it easier to follow the debug log when trying to figure out
issues with mesh peering exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 17:50:15 +02:00
Jouni Malinen
6174de663c mesh: Connection and group started/removed events into debug log
The messages were sent out with wpa_msg_ctrl() so they were not visible
in the debug log. However, these would be quite helpful strings to
search for in the debug log, so change these messages to use wpa_msg().

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 13:13:13 +02:00
Jouni Malinen
e9ccfc38fd Clear wpa_supplicant state to DISCONNECTED on FLUSH command
It was possible for the FLUSH command to trigger auto connect mechanism
to schedule a new scan in 100 ms. This is not desired since all the
network profiles will be removed immediately and the scan or an attempt
to reconnect would not be of any benefit here. Such a scan in 100 ms can
cause issues for cases where multiple test sequences are run back to
back, so prevent this by clearing wpa_supplicant state to DISCONNECTED
(which avoids scheduling of the 100 ms scan trigger on disconnection) if
the state was AUTHENTICATING or higher when the FLUSH command was
issued.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-01-04 23:37:43 +02:00
Jouni Malinen
aeb408fff1 HS 2.0: Add some documentation for OSEN and network block use
This adds notes on how wpa_supplicant can be configured for OSEN for a
link-layer protected online signup connection and how network profiles
can be set for a Hotspot 2.0 data connection when using external
Interworking network selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-01-04 21:34:39 +02:00
Jouni Malinen
15c5606758 Update copyright notices for the new year 2016
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-01 13:42:04 +02:00
Jouni Malinen
6e379c6c16 WPS: Testing mechanism to force auth/encr type flags
The new wps_force_{auth,encr}_types parameters can be used in test build
(CONFIG_WPS_TESTING) to force wpa_supplicant to use the specified value
in the Authentication/Encryption Type flags attribute. This can be used
to test AP behavior on various error cases for which there are
workarounds to cover deployed device behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-01 13:42:04 +02:00
Jouni Malinen
944f693591 P2P: Stop offchannel TX wait on P2P_STOP_FIND/P2P_LISTEN
Previously it was possible for the pending Action frame TX to be
cleared, but the offchannel TX operation being left in wait state in the
kernel. This would delay start of the next operation (e.g., that listen
operation requested by P2P_LISTEN) until the wait time for the
previously pending Action frame had expired.

Optimize this by explicitly stopping any pending offchannel Action frame
TX when clearing the internal offchannel TX state in
wpas_p2p_clear_pending_action_tx().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 00:03:21 +02:00
Jouni Malinen
8edd9f1058 P2P: Add an option to specify group SSID in P2P_CONNECT join case
The new optional ssid=<hexdump> argument to P2P_CONNECT can be used to
make P2P Client operations during join-an-existing-group more robust by
filtering out scan results based on the SSID in addition to the P2P
Device/Interface Address. This can help if the same MAC address has been
used in multiple groups recently and the cached scan results may still
include an older BSS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:12:38 +02:00
Jouni Malinen
70e0cb33f2 P2P: Provide group SSID, if specified, to P2P Client join step
At least one of the wpas_p2p_connect() callers (NFC join case) already
had access to the Group SSID. Pass that information through
wpas_p2p_connect() to wpas_p2p_join() so that the join operation can
filter out incorrect groups more easily.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:08:51 +02:00
Jouni Malinen
438be60153 P2P: Do not accept any GO BSS entry if SSID is specified for join
Accept only a BSS entry matching the SSID when trying to find the
operating channel of a GO during join operation for which the SSID was
already specified. Previously, it could have been possible to pick an
incorrect BSS entry if the new GO was not found in the latest scan and
there was an older cached scan entry for the same BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:06:19 +02:00
Jouni Malinen
35510d530a P2P: Use join SSID in the skip-PD cases
It was already possible to limit join operation to accept only a
specific SSID. However, this constraint was not used when starting a P2P
Client interface as a WPS Enrollee without going through a Provision
Discovery exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:04:43 +02:00
Jouni Malinen
8b8d4f4eb4 P2P: Do not accept any BSS entry for join if SSID is already known
Use wpa_bss_get() with the specific Group SSID instead of
wpa_bss_get_bssid_latest() if the SSID is already known. This makes the
P2P join operations more robust in case the frequency of the group was
not yet known and the same P2P Interface Address may have been used in
multiple group instances with an older group entry still present in the
cached scan results.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:02:33 +02:00
Jouni Malinen
b875276c4d P2P: Use group SSID, if known, for join operation even if no BSS entry
This allows the cases where a specific group SSID is known to filter out
groups on the P2P Client even if the specific BSS entry for the target
group is not yet available.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:00:56 +02:00
Jouni Malinen
aa256cb399 P2PS: Add group SSID, if known, to the P2PS-PROV-DONE event
The new optional group_ssid=<hexdump> argument in the P2PS-PROV-DONE
event can be used to help in identifying the exact group if there have
been multiple groups with the same P2P Interface Address in short period
of time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 18:59:03 +02:00
Jouni Malinen
c2ed779748 mesh: Document Mesh Peering Management element structure in more detail
Provide details on the pointers to the subfields and rename "pmk" to
"chosen_pmk" and use SAE_PMKID_LEN macro with it to make the code more
readable.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:21:08 +02:00
Bob Copeland
b2817cd5c2 mesh: Check PMKID in AMPE Action frames
From IEEE Std 802.11-2012 13.3.5:

   If the incoming Mesh Peering Management frame is for AMPE and the
   Chosen PMK from the received frame contains a PMKID that does not
   identify a valid mesh PMKSA, the frame shall be silently discarded.

We were not checking the PMKID previously, and we also weren't parsing
it correctly, so fix both.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2015-12-28 17:21:08 +02:00
Bob Copeland
6c33eed3ee mesh: Fix PMKID to match the standard
IEEE Std 802.11-2012 11.3.5.4 specifies the PMKID for SAE-derived keys
as:

   L((commit-scalar + peer-commit-scalar) mod r, 0, 128)

This is already calculated in the SAE code when the PMK is derived, but
not saved anywhere. Later, when generating the PMKID for plink action
frames, the definition for PMKID from 11.6.1.3 is incorrectly used.
Correct this by saving the PMKID when the key is generated and use it
subsequently.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2015-12-28 17:21:08 +02:00
Ilan Peer
ede7770180 wpa_supplicant: Do not wait for monitor on P2P Device interface
External programs are not aware of the creation of a
dedicated P2P Device interface, so it does not make sense
to wait for a monitor to connect on such an interface.

Fix this by not waiting on a dedicated P2P Device interface
for monitor to attach.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-28 17:21:08 +02:00
Ilan Peer
1c94570f1b Do not wait for monitor to attach if no control interface
In case an interface has started without a control interface
initialized, skip waiting for monitor to attach at the start of
wpa_supplicant (-W).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-28 17:21:08 +02:00
Jouni Malinen
f98674aa37 Clone default LIBS value to LIBS_* for other tools
If LIBS is set with some global build system defaults, clone those for
LIBS_c, LIBS_h, LIBS_n, and LIBS_p to cover wpa_cli, wpa_passphrase,
hostapd_cli, hlr_auc_gw, and nt_password_hash as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:21:08 +02:00
Jouni Malinen
7d2f67433d Add "GET_CAPABILITY acs" to allow ACS build option to be detected
This allows upper layer software to check whether wpa_supplicant can use
ACS for AP mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 22:24:05 +02:00
Tomasz Bursztyka
d99097177a wpa_supplicant: Enable Automatic Channel Selection support for AP mode
Since hostapd supports ACS now, let's enable its support in
wpa_supplicant as well when starting AP mode.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
[u.oelmann@pengutronix.de: rebased series from hostap_2_1~944 to master]
[u.oelmann@pengutronix.de: adjusted added text in defconfig]
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
2015-12-24 22:24:05 +02:00
Tomasz Bursztyka
96bc508684 Handle survey event properly in wpa_supplicant
Let's reuse hostapd code for such handling. This will be useful to get
ACS support into wpa_supplicant where this one needs to handle the
survey event so it fills in the result ACS subsystem will require.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
[u.oelmann@pengutronix.de: rebased series from hostap_2_1~944 to master]
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
2015-12-24 21:35:54 +02:00
Jouni Malinen
662512e027 P2PS: Remove dead code
Commit f8a80e39b3 ('P2PS: Change
connection capability handling') added the identical P2PS_SETUP_CLIENT
check into two places within p2ps_group_capability(). However, only the
first one of these can be reached. In the second case, role can only
have values 0 or P2PS_SETUP_NEW and as such, the P2PS_SETUP_CLIENT case
is not possible. It looks like the first part of the commit is
sufficient, so remove the dead code added by the second part.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 19:16:15 +02:00
Jouni Malinen
d6b536f7e5 Add ocsp=3 configuration parameter for multi-OCSP
ocsp=3 extends ocsp=2 by require all not-trusted certificates in the
server certificate chain to receive a good OCSP status. This requires
support for ocsp_multi (RFC 6961). This commit is only adding the
configuration value, but all the currently included TLS library wrappers
are rejecting this as unsupported for now.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-24 00:54:30 +02:00
Jouni Malinen
0ab0de88e8 Document previously missing key_mgmt values
Number of key_mgmt options were missing from the documentation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-21 17:45:57 +02:00
Jouni Malinen
c24f8e8e75 GAS: Do not cancel initial offchannel wait with comeback delay 1
The minimum comeback delay 1 is used to indicate that fragmentation is
needed instead of indicating that the response is going to be available
only after some time. Do not cancel offchannel wait for this case
between the initial and comeback exchanges to avoid delaying the full
operation unnecessarily.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
364282c8c9 GAS: Retry full GAS query if comeback response is not received
It is possible for a comeback response to get lost especially when going
through a large GAS exchange fragmented to multiple frames in an
environment with interference or other traffic. Make this less likely to
fail the full exchange by trying full GAS query again and using longer
wait time on the GAS comeback exchanges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Matti Gottlieb
8fb718a748 GAS: Shorten the duration of the wait for GAS comeback response
When exchanging GAS frames with the AP, the initial response from the AP
may take a while to come, since the AP may need to fetch the info from a
server. The next fragments/comeback response frames should take much
less time since the AP already has all of the info, so the wait time
for these frames can be reduced.

In addition, some drivers, e.g., mac80211, try to combine ROC based flows,
to improve medium utilization. For example, if the requested ROC fits
entirely in a previous requested ROC they can be combined. Thus, reducing
the wait time for the next frames can improve medium utilization.

Shorten the duration of GAS comeback to improve medium utilization and
overall GAS exchange times.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-12-20 19:42:12 +02:00
Jouni Malinen
c012567df6 GAS: Clear offchannel_tx_started when ending remain-on-channel
Commit 2c0d0ae370 ('GAS: End
remain-on-channel due to delayed GAS comeback request') started ending
the remain-on-channel operation between the initial request and the
following comeback request. However, it did not check or update the
offchannel_tx_started variable. While this alone would not necessarily
be problematic, this makes it more difficult to optimize wait time for
offchannel TX operations, so make sure the internal tracking variable
gets updated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 19:40:01 +02:00
Jouni Malinen
e7160bd8fe Drop any pending EAPOL RX frame when starting a new connection
Such a pending frame cannot be valid anymore, so drop it instead of
risking of using an unexpected EAPOL frame after association if a
previous association received one at the end and the new association can
happen within 100 ms.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
61f25f80b4 HS 2.0: Remove duplicate icon entries
Only one of the icon entries with a matching BSSID and file name can be
fetched from wpa_supplicant and as such, there is no need to maintain
the old data if it was not explicitly deleted before running a new fetch
for the same BSSID and icon. Remove older duplicated entries whenever
completing a pending icon fetch to optimize memory use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 18:53:27 +02:00
Jouni Malinen
ca9968a012 HS 2.0: Convert icon storage to use dl_list
This simplifies the list operations quite a bit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 18:49:57 +02:00
Jan Nordqvist
8dd5c1b4e9 HS 2.0: Add a command to retrieve icon with in-memory storage
This adds a new command based Hotspot 2.0 icon retrieval option.

In short, here is the new command sequence:
1. REQ_HS20_ICON <bssid> <file-name>
2. event: RX-HS20-ICON <bssid> <file-name> <size>
3. GET_HS20_ICON <bssid> <file-name> <offset> <size>
   (if needed, repeat with larger offset values until full icon is
   fetched)
5. DEL_HS20_ICON <bssid> <file-name>

REQ_HS20_ICON is a new command that is analogous to HS20_ICON_REQUEST
with the slight difference that an entry to store the icon in memory is
prepared. The RX-HS20-ICON event has been augmented with BSSID,
file-name and size, and GET_HS20_ICON is used to retrieve a chunk of up
to <size> bytes of icon data at offset <offset>. Each chunk is returned
as a base64 encoded fragment, preceded by "HS20-ICON-DATA", BSSID, and
file-name as well as the starting offset of the data.

If there is no entry prepared for the icon when the ANQP result comes
back, hs20_process_icon_binary_file falls back to legacy behavior.

Finally the DEL_HS20_ICON command deletes (all) icons associated with
BSSID and file-name (there could be several if retries are used and they
have different dialog tokens).

Signed-off-by: Jan Nordqvist <jannq@google.com>
2015-12-19 18:34:01 +02:00
Dmitry Shmidt
96e8d831a5 wpa_supplicant: Add SIGNAL_MONITOR command
SIGNAL_MONITOR THRESHOLD=DD HYSTERESIS=DD command will request signal
strength monitoring events based on there having been requested amount
of drop in the signal strength. The threshold value is the RSSI
threshold in dBm for the event to be sent. 0 threshold can be used to
disable monitoring. The hysteresis value is RSSI hysteresis in dB to
specify the minimum amount of change before a consecutive event is
reported.

With nl80211 driver interface, these values map to the
NL80211_CMD_SET_CQM command with NL80211_ATTR_CQM_RSSI_THOLD and
NL80211_ATTR_CQM_RSSI_HYST attributes to the driver.

This command cannot be used when bgscan module is in use since that
depends on being able to control the connection monitoring parameters.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2015-12-18 21:02:37 +02:00
Matti Gottlieb
2c0d0ae370 GAS: End remain-on-channel due to delayed GAS comeback request
During the sequence of exchanging GAS frames with the AP, the AP can
request to come back in X amount of time and resend the GAS request.

Previously, wpa_supplicant did not terminate the remain-on-channel
session, but rather waited until the requested comeback delay had
expired, and then tried to send the GAS frame (potentially to save the
time that is required to schedule a new remain on channel flow).

This might cause unnecessary idle time (can be close to 1000 ms) in
which the device might be off-channel. Ending the current
remain-on-channel session and then rescheduling makes better usage of
the time in this case.

End remain-on-channel session due to receiving a delayed GAS comeback
request from the AP.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-12-18 20:32:53 +02:00
Eliad Peller
685ea2f60c wpa_cli: Send ALL_STA command to the correct interface
wpa_ctrl_command_sta(), called by the "ALL_STA" handler, didn't consider
ifname_prefix, resulting in various commands being sent to the global
control interface, rather than the specified interface when IFNAME=
prefix was used.

This in turn caused the unexpected "UNKNOWN COMMAND" result be
considered as valid station, resulting in infinite loop while trying to
get all stations.

Fix it by considering ifname_prefix, similarly to _wpa_ctrl_command().

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-12-18 00:24:52 +02:00
Ayala Beker
0e6a2cf282 Disconnect before trying to switch to a different network
Previously, when wpa_supplicant received bgscan results with a preferred
network, it connected to that network without disconnecting from the
previous one. This might result in an inconsistent state of upper
layers.

Fix this by disconnecting from the current AP before connecting to the
new one when the network profile changes and there is an existing
connection.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2015-12-18 00:24:52 +02:00
Arik Nemtsov
706e11a485 Avoid network selection from scan during connection
If scan results arrive during the connection process, the network
selection function was called, interrupting the current connection.
While a regular scan is mutually exclusive with connection establishment
via the nature of radio work, there's no such protection for scheduled
scan. Prevent network selection while a connection is in progress.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-12-18 00:24:52 +02:00
Ayala Beker
1b3dd69d93 P2P: Fix possible NULL pointer dereference
Fix wpas_p2p_invite() to call p2p_set_own_pref_freq_list() after the
NULL check, to avoid NULL pointer dereference if P2P initialization were
to have failed or P2P module getting deinitialized.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2015-12-18 00:24:51 +02:00
Jouni Malinen
d06a35052f mesh: Fix VHT Operation information in peering messages
The full VHT channel information was not set in the hostapd data
structures which resulted in incorrect information (all zeros) being
used when building the VHT Operation element for peering messages while
the actual driver mode was set with the full details. We did not seem to
use the VHT information from peering messages, so this does not change
behavior with another wpa_supplicant-based mesh implementation. Anyway,
these elements should match the ones used in Beacon frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
d560288a44 TLS: Parse CertificateStatus message
This allows the internal TLS client implementation to accept
CertificateStatus message from the server when trying to use OCSP
stapling. The actual OCSPResponse is not yet processed in this commit,
but the CertificateStatus message is accepted to allow the TLS handshake
to continue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-14 15:49:01 +02:00
Jouni Malinen
3c108b7573 EAP peer: External server certificate chain validation
This adds support for optional functionality to validate server
certificate chain in TLS-based EAP methods in an external program.
wpa_supplicant control interface is used to indicate when such
validation is needed and what the result of the external validation is.

This external validation can extend or replace the internal validation.
When ca_cert or ca_path parameter is set, the internal validation is
used. If these parameters are omitted, only the external validation is
used. It needs to be understood that leaving those parameters out will
disable most of the validation steps done with the TLS library and that
configuration is not really recommend.

By default, the external validation is not used. It can be enabled by
addingtls_ext_cert_check=1 into the network profile phase1 parameter.
When enabled, external validation is required through the CTRL-REQ/RSP
mechanism similarly to other EAP authentication parameters through the
control interface.

The request to perform external validation is indicated by the following
event:
CTRL-REQ-EXT_CERT_CHECK-<id>:External server certificate validation needed for SSID <ssid>

Before that event, the server certificate chain is provided with the
CTRL-EVENT-EAP-PEER-CERT events that include the cert=<hexdump>
parameter. depth=# indicates which certificate is in question (0 for the
server certificate, 1 for its issues, and so on).

The result of the external validation is provided with the following
command:
CTRL-RSP-EXT_CERT_CHECK-<id>:<good|bad>

It should be noted that this is currently enabled only for OpenSSL (and
BoringSSL/LibreSSL). Due to the constraints in the library API, the
validation result from external processing cannot be reported cleanly
with TLS alert. In other words, if the external validation reject the
server certificate chain, the pending TLS handshake is terminated
without sending more messages to the server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 18:24:27 +02:00
Jouni Malinen
651c6a84af Add TEST_ASSOC_IE for WPA/RSN IE testing on AP side
The new wpa_supplicant control interface command "TEST_ASSOC_IE
<hexdump>" can now be used to override the WPA/RSN IE for Association
Request frame and following 4-way handshake to allow protocol testing of
AP side processing of WPA/RSN IE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 19:33:16 +02:00