Commit graph

21 commits

Author SHA1 Message Date
Jouni Malinen
2974633d0c tests: Remove unused import statements
These were not used at all and caused unnecessary operations and in some
cases, compatibility issues with python3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-02 11:35:13 +02:00
Jouni Malinen
c97d7c2a60 tests: Wi-Fi Display extensions to P2P with R2 subelems
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 12:16:10 +02:00
Jouni Malinen
71676559ca tests: Peer disabling Wi-Fi Display advertisement
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 12:45:08 +02:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jouni Malinen
a63ebc159d tests: Fix wifi_display_parsing
Due to a typo in a function name, this test case ended up running
without the final cleanup. That could result in the following test cases
failing, e.g., when running this sequence:
wifi_display_parsing dbus_p2p_go_neg_auth

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:31:03 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
10649029ca tests: Wi-Fi Display extensions to P2P and special parsing cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
191d8c4f78 tests: Make wifi_display enforce social channel as operating channel
Previously, this was assumed to be the case due to default channel
selection behavior. However, that may not be the case with driver-based
preference list processing. Enforce a social channel to be used as the
operating channel here since dev[2] uses social channel only device
discovery and needs to find the GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Ilan Peer
bab3191718 tests: Fix wifi_display to use the global control interface
This is needed if the configuration is using a dedicated P2P Device
interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:14:30 +03:00
Ilan Peer
063006328a tests: Fix wifi_display_persistent_group with P2P Device
Use the global control interface to list the P2P Device persistent
networks. Get and parse the P2P-GROUP-STARTED events, so later the
interface names would be available for the connectivity test etc. Both
of these are required when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:12:33 +03:00
Jouni Malinen
db1d66d879 tests: Fix wifi_display_persistent_group event checks
The final invitation case in this test was verified incorrectly. The GO
was already operatign in that case, so there was not supposed to be a
new P2P-GROUP-STARTED message from GO. That happened to be show up in
the pending event messages from the last instance, but that was just by
accident and any additional dump_monitor() operation added here would
cause this test to fail. Fix this by handling the final invitation
separately and verifying that only the client side indicates
P2P-GROUP-STARTED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
c1e33588b8 tests: Optimize WFD connect_cli() calls
There is no need to run full scan in these test cases, so use single
channel scan to save time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 15:47:21 +02:00
Jouni Malinen
f8fee78879 tests: WFD_SUBELEM_SET/GET with all parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 15:47:20 +02:00
Jouni Malinen
6503deb9ac tests: Wi-Fi Display element updates and P2P-DEVICE-FOUND
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:46:24 +03:00
Jouni Malinen
e862968d18 tests: Validate parsing and rejection of invalid WFD subelement
This is a regression test for wifi_display_subelem_hex() bounds checking
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 15:29:48 +03:00
Jouni Malinen
cdad30be2a tests: P2P invitation with Wi-Fi Display enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
20066e3fe7 tests: Wi-Fi Display through the global interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 23:43:36 +03:00
Jouni Malinen
52a0242b4e tests: Increase Wi-Fi Display testing coverage
Add more subelements, WSD, and disabling of Wi-Fi Display.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 12:31:45 +03:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
82fa9b62ff tests: Add forgotten test_wifi_display description
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
8426a1474a tests: Verify Wi-Fi Display operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00