Commit graph

31 commits

Author SHA1 Message Date
Johannes Berg
0e92fb8fae rfkill: Match only the correct expected wiphy rfkill
On systems that have multiple WLAN rfkill instances, the rfkill code
can become confused into thinking that the device was unblocked when
in fact it wasn't, because it only matches on the WLAN type.

Since it then stores the new (unblocked) state from the wrong rfkill
instance, it will never retry the failing IFF_UP operation and the
user has to toggle rfkill again, or otherwise intervene manually, in
this case to get back to operational state.

Fix this by using the existing (but unused) ifname argument when the
rfkill instance is created to match to a specific rfkill index only.

As a P2P Device interface does not have a netdev interface associated
with it, use the name of a sibling interface to initialize the rfkill
context for the P2P Device interface. For nl80211, as the wiphy index
is known only after getting the driver capabilities from the kernel,
move the initialization of the rfkill object to
wpa_driver_nl80211_finish_drv_init().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Avraham Stern
09ea4309b6 nl80211: Add support for multiple scan plans for scheduled scan
Add 'scan plans' to driver scan parameters for scheduled scan.
Each 'scan plan' specifies the number of iterations to run the scan
request and the interval between iterations. When a scan plan
finishes (i.e., it was run for the specified number of iterations),
the next scan plan is executed. The last scan plan will run
infinitely.

The maximum number of supported scan plans, the maximum number of
iterations for a single scan plan and the maximum scan interval
are advertised by the driver.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-11-30 14:03:28 +02:00
Ahmad Kholaif
bee5d8e067 nl80211: Add VHT 160 MHz channel flags
This extends the previous design that covered only the VHT 80 MHz cases
for VHT channel flags. New functions are introduced to allow 160 MHz
bandwidth cases to determine the center channel and check availability
of a 160 MHz channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 19:01:14 +02:00
Jouni Malinen
747ba1067d nl80211: Do not return incomplete hw capability info
If a memory allocation fails while parsing driver capabilities, drop all
mode/channel/rate information instead of returning possibly partial
information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Andrei Otcheretianski
366179d218 nl80211: Suppport multiple CSA counters
Channel switch may be performed using both CSA and eCSA IEs together.
This may happen, for example with a P2P GO on band A with legacy
clients. Extend driver API to support up to 2 CSA counters.

This patch also includes the required implementation for nl80211.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 19:56:08 +03:00
Jouni Malinen
b658547dd5 nl80211: Add build option for QCA vendor extensions
This allows the binary sizes to be reduced if no support for nl80211
vendor extensions are needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 12:45:27 +03:00
Kanchanapally, Vidyullatha
8e5097456a nl80211: Extract driver offchannel simultaneous capability
Make the driver offchannel simultaneous capability available to
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
f22a080cdc nl80211: Driver interaction for QCA vendor scan
This commit contains the necessary changes for supporting the QCA vendor
scan implementation, i.e., sending the vendor scan command to underlying
driver and handling the vendor scan events from the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Ahmad Kholaif
983422088f nl80211: Add means to query preferred channels
Extend the QCA vendor specific nl80211 interface to query the preferred
frequency list from driver and add a new wpa_cli command to query this
information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 19:46:31 +03:00
Ahmad Kholaif
7c813acf9c P2P: Inform driver of the operating channel following group formation
Upon GO Negotiation completion, if the remote peer becomes GO, send a
hint event over QCA vendor specific interface to inform the driver of
the likely operating channel of the P2P GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 19:10:16 +03:00
Ahmad Kholaif
079a28f7b8 nl80211: Add concurrency capabilities to driver status
Extend the nl80211 interface command "driver status" to retrieve the
concurrency capabilities from the driver using the QCA vendor
extensions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 18:52:12 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Peng Xu
3784c0589e Extend hw_mode to support any band for offloaded ACS case
When device supports dual band operations with offloaded ACS, hw_mode
can now be set to any band (hw_mode=any) in order to allow ACS to select
the best channel from any band. After a channel is selected, the hw_mode
is updated for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-27 12:17:57 +03:00
Zefir Kurtisi
5f9c92f8f7 nl80211: Fix vendor command handling
In wiphy_info_handler(), vendor specific commands were
interpreted as QCA specific without checking for the OUI,
which caused incorrect setting of driver flags with
commands from other vendors. As a result, that could
prevent proper operation (e.g., inability to process CSA).

This patch ensures that QCA vendor specific commands are
checked against QCA OUI before related flags are set.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
2015-03-20 15:56:59 +02:00
Janusz Dziedzic
4acdc48a43 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute
Handle NL80211_ATTR_EXT_FEATURES attribute and
NL80211_EXT_FEATURE_VHT_IBSS to determine whether
the driver supports VHT with IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-03-15 20:36:49 +02:00
Eliad Peller
abb8d08b8a nl80211: Add support for configuring P2P GO CTWindow
Configure the GO CTWindow on APstart if the driver supports it and this
parameter is set in wpa_supplicant configuration.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-02-21 16:07:53 +02:00
Jouni Malinen
1db718b3ce nl80211: Test vendor command and event
This adds testing code (for CONFIG_TESTING_OPTIONS=y builds only) to
send an nl80211 vendor command and report a test vendor event in case
the driver supports this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:07:29 +02:00
Jouni Malinen
399e61353a Add Suite B AKMs to key_mgmt capability list
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Luciano Coelho
7b7b4449a9 nl80211: Fix reading of the extended capabilities mask
We were copying the NL80211_ATTR_EXT_CAPA attribute into the
extended_capa_mask element, which is incorrect. Use
NL80211_ATTR_EXT_CAPA_MASK instead.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-01-20 01:57:59 +02:00
Janusz Dziedzic
1830817ece IBSS: Add WPA_DRIVER_FLAGS_HT_IBSS
Add WPA_DRIVER_FLAGS_HT_IBSS driver feature flag. Some drivers could not
set this feature and next could fail when we will enable HT support for
IBSS with error message: nl80211: Join IBSS failed: ret=-22 (Invalid
argument).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Ilan Peer
86056fea63 nl80211: Handle MAC address randomization in scan/sched_scan
1. Process supported driver capabilities.
2. Populate scan request with MAC address randomization data

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-01-04 23:06:31 +02:00
Arik Nemtsov
4daa572925 TDLS: Add channel-switch capability flag
Propagate a driver TDLS channel-switch support bit from nl80211 to
TDLS code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 18:59:31 +02:00
Jouni Malinen
49e3eea8d9 Avoid -Wshadow warnings from older gcc versions
It looks like gcc 4.8.2 would warn about these with -Wshadow, but 4.6.3
did.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Jouni Malinen
9725b78421 nl80211: Use nl80211_drv_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and drv->ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:12 +02:00
Jouni Malinen
56f77852e5 nl80211: Use the new nl80211_cmd_msg() helper
This removes duplicated code for building nl80211 commands for a BSS.
This commit handles the functions that were already using
nl80211_set_iface_id().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:25 +02:00
Jouni Malinen
9589a91e0e nl80211: Get rid of NLA_PUT* macro use in capability checking
This gets rid of NLA_PUT* macro use in checking nl80211 capabilities to
reduce the number of functions that depend on the hidden behavior of
jumping to the nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:18:38 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Assaf Krauss
58162adf06 nl80211: Populate RRM flags in nl80211 driver
Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:06:32 +02:00
Moshe Benji
dfa8787833 nl80211: Implement add_ts/del_ts ops
Add ops to notify about TSPECs to add/remove. Additionally, subscribe to
ADDTS/DELTS Action frames to be able to process WMM AC Action frames.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:21:22 +02:00
Jouni Malinen
0fafeb5454 nl80211: Move capability determination into a separate file
This moves significant amount of code away from large driver_nl80211.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00