Commit graph

3118 commits

Author SHA1 Message Date
Jouni Malinen
d118a6b8c8 D-Bus: Fix WPS.Start method in AP/P2P GO mode
Previously, role="enrollee" was required to be used to allow the AP mode
WPS operation to be started. This is incorrect since the AP/GO will
operate in Registrar role. Fix this by ignoring the role parameter when
AP (including P2P GO) mode is enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
bd47d68035 WPS: Reject station-mode WPS operations when AP mode is enabled
Start of station-mode WPS PBC/PIN/Registrar/NFC operation would result
in the AP mode getting disabled. This can be particularly confusing for
the P2P GO case where the group would need to be stopped cleanly. As
such, it is better to reject these invalid operations rather than trying
to handle all corner cases needed to allow this to work robustly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
f47a562c73 D-Bus: Move NetworkRequest signal to correct registration array
This is an interface signal, not a global signal, so move it to the
current array for registering the signal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
afaa6d99a4 D-Bus: Remove registration of P2PStateChanged signal
This signal is not generated anywhere, so there is no point in claiming
it to be available.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
1a4efde5bd D-Bus: Make P2P Group Passphrase property getter available for P2P Client
There is no need to limit this property based on the role of the device
in the group, so return the passphrase if it is available. It will be
available in GO role and it may be available in P2P Client role based on
whether the peer GO provided it during the WPS provisioning step.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
20e1d81e09 D-Bus: Fix P2P Group PSK property getter
This was returning a byte array of the pointer to the PSK, not the
actual PSK, due to incorrect use of
wpas_dbus_simple_array_property_getter(). In addition, there is no need
to limit this property based on the role of the device in the group, so
return the PSK if it is available (which it will be for both GO and P2P
Client roles).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
a0caebf397 D-Bus: Simplify out-of-memory reporting
There is no need to have separate wpa_printf() and different error
message strings for the unlikely out-of-error messages. Use a helper
function, wpas_dbus_error_no_memory(), to get consistent behavior with a
one-line call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
ff1d8104e2 D-Bus: Remove the obsolete notes from wpas_dbus_error_unknown_error()
Commit 6aeeb6fa21 ('dbus: clean up new
D-Bus interface getters and setters') redesigned the property
getter/setter calls in a way that made the
wpas_dbus_error_unknown_error() note about message being NULL in some
cases obsolete. All the remaining callers are from method handler
functions that must have a valid message. Remove the obsolete notes and
unnecessary messsage == NULL check.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
38279bdb35 D-Bus: Coding style cleanup
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
e3c4f0b5d5 D-Bus: Simplify message building error paths
There is no need to have multiple separate return statements for error
cases in a sequence of operations. In addition, there is not much point
in "converting" boolean return values with "if (!res) return FALSE;
return TRUE;" style constructions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
bba40b65b0 D-Bus: Fix GroupAdd, Invite, RemovePersistentGroup path validation
net_id_str can be NULL and that must be checked for to avoid NULL
pointer dereference if an invalid persistent_group_object path is used
with these methods.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
ce82168b55 D-Bus: Fix error message for Listen() failure
DBUS_ERROR_NO_MEMORY does not look like the best option for the failure
reason in case wpas_p2p_listen() fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
054dc3136f D-Bus: Clean up wpas_dbus_new_decompose_object_path()
None of the new D-Bus interface cases use the bssid_part in
decompose_object_path (while the old interface ones do). As such, this
is dead code and can be removed. In addition, the P2P addition here was
pretty ugly extension. Replace these with a cleaner way of passing the
separating string (e.g., "Networks") from the caller and returning the
requested item.

In addition, there is no need to allocate the returned item separately,
so use a single allocation and a pointer to that allocated memory. This
will make it easier for callers to have to free only a single
allocation. This is also fixing a memory leak in P2P invitation
persistent group case where the caller had missed the need to free the
returned values.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
b76ea413b1 D-Bus: Clean up parse_peer_object_path() uses
This helper function does not modify peer_path, so mark it const. In
addition, there is no point in callers to check separately whether
peer_path is NULL since that is taken care of by this helper function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
509618d35b D-Bus: Remove useless NULL check from static function
The entry argument cannot be NULL in this static function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
1d12c08847 D-Bus: Add debug prints for parsing dict entries
This makes it easier to figure out what happens if there are issues with
processing messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
605325fb75 D-Bus: Remove useless wpa_s->conf checks
This cannot be NULL when an interface is in use. There is not much point
in couple of functions checking this while large number of other places
do not.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
88ce7938b0 D-Bus: Write Get/Set property name in debug log
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
5485798f40 D-Bus: Add more debug prints to cover operations
This adds the message signature to the new D-Bus interface message
handler and similar prints to the old interface messages handlers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
7fbe56b018 D-Bus: Fix property change timer update
eloop_is_timeout_registered() was called with incorrect context argument
which meant that the pending timeout would have never been found.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
3a593ff5b2 D-Bus (old): Fix removeNetwork method to not use freed memory
wpa_supplicant_deauthenticate() call needs to happen before
wpa_config_remove_network(). Freed memory could be dereferenced if
removeNetwork method was issued on the currently connected network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
f11e797d4c D-Bus: Avoid valgrind warning due to compiler optimization
It looks like both gcc and clang optimize the (entry.type != foo ||
entry.array_type != bar) in a way that ends up evaluating the second
condition even when the first one results in 0. While this is not really
what the C language requirements on short-circuit evaluation require,
the compiler likely assumes this can have no side effects and with both
type and array_type being comparable in a single 64-bit operation, this
can clearly be a bit more efficient. While the code behaves same in both
cases, valgrind does warn about use of uninitialized memory when the
second condition is evaluated (entry.array_type is not initialized if
entry.type != DBUS_TYPE_ARRAY).

To keep valgrind logs cleaner, initialize entry.array_type to
DBUS_TYPE_INVALID so that these compiler optimizations do not result in
reading uninitialized memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Jouni Malinen
19d4dab759 D-Bus: Avoid compiler warning on sometimes uninitialized variable
The logic in wpas_dbus_signal_p2p_provision_discovery() seemed to imply
that there could be a case where _signal would be used uninitized. While
that is not the case since either (request || !status) or (!request &&
status) would always be true, some compilers do not seem to be clever
enough to figure that out to avoid the warning. Make this easier for
such compilers by removing the (!request && status) condition since it
is identical to !(request || !status).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:48:30 +02:00
Jouni Malinen
bc7baaff24 D-Bus: Make WPAS_DBUS_TYPE_BINARRAY value less confusing
Commit 911e97e400 ('DBus: Refactor array
adding, add binary arrays') introduced WPAS_DBUS_TYPE_BINARRAY as an
internal fake type for array_type. However, it selected this value to be
(DBUS_NUMBER_OF_TYPES + 100) = 116 = 't'. This happens to conflict with
DBUS_TYPE_UINT64 ((int) 't'). While none of the existing array_type use
cases supported UINT64, it is much clearer if WPAS_DBUS_TYPE_BINARRAY
has a value that does not match any existing DBUS_TYPE_* value. Replace
this with '@' (64).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-01 13:51:45 +02:00
Jouni Malinen
5f3682dc6f D-Bus: Fix dict binarray getter to accept empty array of array
This is needed to allow Set(P2PDeviceConfig) to clear the
VendorExtension array (i.e., to remove all configured vendor
extensions). Previously, such an attempt was met with a D-Bus assert and
rejection of the operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 13:34:52 +02:00
Jouni Malinen
54e06b4ffb D-Bus: Fix memory leak on P2PDeviceConfig::VendorExtension
The wps_vendor_ext array can be set using D-Bus Set(P2PDeviceConfig)
with the VendorExtension key in the dictionary. However, there was no
code for freeing the allocated memory when the interface is removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 13:07:13 +02:00
Jouni Malinen
68bb007743 D-Bus: Fix GONegotiationSuccess signal passphrase format
Passphrase is a variable length string of (8..63 characters), not a byte
array of fixed 64 octets.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 11:44:42 +02:00
Jouni Malinen
3cccf0b870 D-Bus: Make wpas_dbus_error_scan_error() static
This function is not used anywhere outside this file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 11:00:54 +02:00
Jouni Malinen
2544394406 D-Bus: Fix ServiceDiscoveryResponse to accept int32 dialog_token
The ServiceDiscoveryRequest signal uses int32 for encoding dialog_token
for some reason (even though this is a u8 field).
ServiceDiscoveryResponse is supposed to accept the values from the
signal as-is, so extend that to accept int32 in addition to the
previously used uint32.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 10:47:31 +02:00
Jouni Malinen
9c4694ce7c D-Bus: Fix memory leaks on AddService/DeleteService error paths
The query and service parameters need to be freed on all paths to avoid
memory leaks in error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-31 01:05:46 +02:00
Jouni Malinen
b07f1ebe0f D-Bus: Fix .Group Set(WPSVendorExtensions) format
The earlier implementation seemed to require a strange extra
encapsulation with a dictionary for setting the WPSVendorExtensions
property while this was defined to have aay signature and the get
operation did indeed return and array of array of bytes without that
dictionary. Fix this to accept aay format for the setter as well. Keep
support for the old dictionary encapsulation format for backwards
compatibility.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-30 22:22:39 +02:00
Jouni Malinen
8509fb5cce D-Bus: Fix memory leak on P2P GO WPSVendorExtensions
It was possible to add WPS vendor extensions through the D-Bus
WPSVendorExtensions setter, but these extensions were not freed when the
P2P GO was stopped or when replacing previously configured extensions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-30 22:22:39 +02:00
Jouni Malinen
4e70bbf1c6 SAE: Clear keys from memory on disassociation
There is no need to keep temporary keys in memory beyond the end of the
association, so explicitly clear any SAE buffers that can contain keys
as soon as such keys are not needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 20:00:02 +02:00
Jouni Malinen
6df1973988 Clear psk_list while freeing config_ssid instances
Previously, the main PSK entry was cleared explicitly, but psk_list
could include PSKs for some P2P use cases, so clear it as well when
freeing config_ssid instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 19:44:51 +02:00
Jouni Malinen
e886c88e95 Explicitly clear the temporary stack-based PSK buffer
There is no need to leave this temporary key in stack memory after
having been configured to the WPA state machine.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 19:44:51 +02:00
Jouni Malinen
658da804e5 Explicitly clear the temporary stack-based key for WPA-None
There is no need to leave this temporary key in stack memory after
having been configured to the driver.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 19:44:51 +02:00
Jouni Malinen
f42df14415 WPS ER: Explicitly clear PSK from stack after use
There is no need to leave the PSK from temporary Credential structure
that was built in stack after that Credential has been passed to the WPS
module.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 19:44:51 +02:00
Jouni Malinen
ce52d031e5 Clear wpa_psk memory when setting up wpa_supplicant AP mode
This is more of a theoretical case since this part is done only during
setup and the structure is not allocated in practice. Anyway,
maintaining more consistent use of bin_clear_free() for structures that
may contain keys is useful.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 19:44:51 +02:00
Jouni Malinen
74df9c1c43 D-Bus(old): Remove duplicated blob->data check
This was already verified to be non-NULL above and there is no point in
having an extra check after the pointer has already been dereferenced.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
8193e01e5b D-Bus(old): Remove unnecessary wpa_supplicant_state_txt() check
This function cannot return NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
62856ad989 D-Bus(old): Fix removeNetwork and selectNetwork error handling
wpas_dbus_decompose_object_path() may leave the network part NULL on
unexpected path. This resulted in NULL pointer dereference when
processing an invalid removeNetwork or selectNetwork call. Fix this by
explicitly verifying that the network part was included in the object
path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
84edd136b5 D-Bus(old): Fix interface to show correct err_msg for blob removal
The "Invalid blob name" string was not shown since the zero-length name
was used regardless of first verifying that it should not be allowed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
91c539c01d D-Bus(old): Fix WPS interface to require BSSID for wpsReg
External WPS Registrar operation requires the BSSID to be specified, so
the old D-Bus interface better apply that requirement as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
dddd870d16 D-Bus(old): Fix WPS interface for PIN from wpa_supplicant case
dbus_message_append_args() needs char** and &npin ended up being char*
and resulted in segmentation fault.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
5f136bc126 D-Bus: Fix P2P persistent group removal from non-D-Bus triggers
It is possible for the persistent group object to be added and removed
by non-D-Bus triggers (e.g., ctrl_iface commands). The add part was
already handled, but removal was not. That resulted in memory leaks when
a P2P persistent group was removed without using an explicit D-Bus
command for this even if the object was added without D-Bus involvement.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
d20be3a739 D-Bus: Fix WPS ConfigMethods getter to handle no value properly
wpas_dbus_simple_property_getter() cannot be used with NULL
DBUS_TYPE_STRING, so replace that with an empty string to handle the
case of no config_methods parameter in the configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
11973b2682 D-Bus: Fix P2P peer joined/disconnected handlers
It is possible for the peer to be a non-P2P device and as such, for
p2p_dev_addr to be NULL. This resulted in NULL pointer dereference if
D-Bus interface was enabled for the interface when a legacy STA joined a
group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
b8db1dfc5c Clear next_scan_freqs on wpa_supplicant FLUSH command
It was possible for old scan state to remain from a previous test case
when an operation like WNM neighbor scan or another-BSS-in-ESS was
started, but stopped at the end of a test case. This could result in
failures, e.g., when running wnm_bss_tm_req followed by scan_setband.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
f4637fe0fd wpa_supplicant: Set stdout line-buffered
This makes wpa_supplicant debug output in stdout line-buffered to remain
consistent with hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
010fa245bd Add QUIET=1 option for make
This can be used to reduce verbosity for build messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00