Commit graph

80 commits

Author SHA1 Message Date
Jouni Malinen
08b2677974 Interworking: Use SSID from the BSS entry
There is no need to parse the IE buffer again to find the SSID of the
BSS since that information is already stored in struct wpa_bss.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:17:48 +02:00
Jouni Malinen
50589751bf Interworking: Reject BSS based on disallow_aps
If a BSS is disallowed temporarily with disallow_aps, the network
connection is going to fail. As such, there is not much point in
allowing Interworking network selection to try to connect with such BSS.
As such, do not consider disallowed networks for automatic network
selection and reject requests to connect to them through
INTERWORKING_CONNECT.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
6ede8a7e4d Interworking: Avoid duplicated network blocks
Do not add multiple network blocks for the same network from a single
credential. INTERWORKING_CONNECT used to generate a new network block
for each instance regardless of what network blocks have already been
configured. While this allows the connection to go through, it is not
efficient to leave behind potentially large number of network blocks
with the same contents (or worse, changed contents). Address this by
removing an older network block for the same credential before adding a
new one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
d28f4e44f1 Interworking: Do not reconnect if already connected
If we are already connected to the selected AP with a network block
that was created based on the selected credential, do not force a
reconnection or network block update.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Naresh Jayaram
efc58df29c eap_proxy: Re-read IMSI from proxy in Interworking functionality
Try to read the IMSI values through the eap_proxy layer for Interworking
functionality again if the value was not available at startup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 10:12:14 +02:00
Jouni Malinen
7617388ea3 Interworking: Report STATUS:sp_type even if domain is not configured
This allows sp_type={home,roaming,unknown} to be used to determine
network type with SIM-based credentials even if the domain name
parameter is not configured explicitly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 13:57:02 +02:00
Jouni Malinen
d20c340f7e Interworking: Clear known_wps_freq for network selection
This was forgotten from the previous commit which allowed some cases to
trigger single-channel scan incorrectly if an optimized WPS scan had not
yet been completed at the time network selection was started.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-27 12:55:09 +02:00
Jouni Malinen
1bd05d0423 Interworking: Force normal scan for network selection
Make sure special optimized scans (like WPS-single-channel or
sched_scan) do not get used during the network selection scan. This
could have been hit in cases where a previous operation has been stopped
in a state where special scan parameters were going to be used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-27 11:26:58 +02:00
Kyeyoon Park
24c694b465 GAS: Delay GAS query Tx while another query is in progress
It would be possible to issue another GAS query when a previous one is
still in progress and this could result in conflicting offchannel
operations. Prevent that by delaying GAS query initiation until the
previous operation has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:13:42 +03:00
Jouni Malinen
e241b1b4f2 eap_proxy: Fix IMSI fetch for home vs. visited network determination
Use similar mechanism to CONFIG_PCSC=y case to set the IMSI and MNC
length for eap_proxy. This allows automatic 3GPP realm comparison
against the domain list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
a5d44ac083 EAP peer: Add framework for external SIM/USIM processing
The new configuration parameter external_sim=<0/1> can now be used to
configure wpa_supplicant to use external SIM/USIM processing (e.g., GSM
authentication for EAP-SIM or UMTS authentication for EAP-AKA). The
requests and responses for such operations are sent over the ctrl_iface
CTRL-REQ-SIM and CTRL-RSP-SIM commands similarly to the existing
password query mechanism.

Changes to the EAP methods to use this new mechanism will be added in
separate commits.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
f47c145285 Interworking: Add required_roaming_consortium parameter for credentials
This allows credentials to be limited from being used to connect to a
network unless the AP advertises a matching roaming consortium OI.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
ac1bc54948 Interworking: Add domain_suffix_match for credentials
This allow domain_suffix_match to be specified for a cred block and then
get this copied for the network blocks generated from this credential as
part of Interworking network selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
463c8ffbd5 Interworking: Add support for multiple home FQDNs
Credentials can now be configured with more than one FQDN ('domain'
field in the cred block) to perform Domain Name List matching against
multiple home domains.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
0b9d3b22c8 Interworking: Relax 3GPP info PLMN matching for MNC
3GPP TS 24.232 Annex A.3 allows network operator to advertise only two
digits of MNC even if MNC has three digits. Allow such matches in
network selection. In addition, allow three digit matches of MNC even if
MNC length was assumed to be two to avoid missing networks if MNC length
cannot be determined reliably. Remove the '-' separator from simulated
SIM/USIM cases to allow the new matching rules to work.

Fix the PLMN List information element parsing loop to use the length of
the PLMN List instead of the length of the full 3GPP Cellular Info to
avoid unexpected matches should a new element ever be added by 3GPP.

Finally, add more debug prints from PLMN matching to make the logs
easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 16:53:05 +03:00
Jouni Malinen
ec7b97ab00 Interworking: Add support for using eap_proxy offload
Fetch IMSI through eap_proxy for Interworking network selection if
needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 18:42:17 +03:00
Jouni Malinen
5e24dc8a4b Add dup_binstr() to help common binary string tasks
There are quite a few places in the current implementation where a nul
terminated string is generated from binary data. Add a helper function
to simplify the code a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:44:59 +03:00
Jouni Malinen
17b8995cf5 Interworking: Try to use same BSS entry for storing GAS results
There may be cases where multiple BSS entries for a single BSSID are in
the table. This is mostly in automated test cases due to the AP
configuration changes, but something similar could potentially happen as
a corner case in more realistic networks, too, e.g., when an AP changes
its operating channel. Make network selection more robust by trying to
find the exact BSS entry instead of any BSS entry with a matching BSSID
when storing GAS/ANQP response.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 11:44:04 +03:00
Masashi Honma
ad5dda8222 Interworking: Remove unused variable warnings
This patch removes these warnings.

interworking.c: In function 'interworking_credentials_available_3gpp':
interworking.c:1330:6: warning: unused variable 'ret' [-Wunused-variable]
interworking.c:1329:19: warning: unused variable 'cred' [-Wunused-variable]

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-02-28 16:34:06 +02:00
Jouni Malinen
b618a469c4 Interworking: Select highest priority cred if multiple matches
Previously, the credential to use for a connection with a specific BSS
was picked arbitrary based on first found match of each matching
mechanism. While the credential priorities were used elsewhere, this did
not take into account that different mechanisms could find multiple
matching credentials. As such, the highest priority credential was not
always used in case more than one credential matched with the selected
BSS. Fix this by checking credential priorities again during connection
request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-16 19:57:35 +02:00
Paul Stewart
cecdddc184 wpa_supplicant: Implement fast-associate on SelectNetwork
If scan results are available when we perform a SelectNetwork, use
them to make an associate decision.  This can save an entire scan
interval-worth of time in situations where something external to
wpa_supplicant (like a connection manager) has just previously
requested a scan before calling SelectNetwork.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-02-03 21:08:31 +02:00
Jouni Malinen
190e39d9cb Interworking: Do not schedule new scan if process is terminating
The GAS query compilation callback may happen after the wpa_supplicant
process has been requested to terminate. Avoid scheduling a new eloop
timeout for a scan in such a case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-07 18:44:46 +02:00
Jouni Malinen
569d43c7ae Interworking: Do not share ANQP info if none was received
Verify that the other BSS has actually received some valid ANQP
information before sharing the results from it. This fixes potential
issues with cases where some of the APs with the same HESSID has invalid
ANQP configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-07 18:41:51 +02:00
Jouni Malinen
d1ec319f12 Interworking: Continue ANQP fetch after TX failure
If the driver rejected any of the offchannel Action frame TX requests,
the previous implementation terminated ANQP fetch process. While the
driver should not really reject the request normally, it is possible
that a request gets rejected for some reason. Allow the fetch process to
continue with the next AP in such case to avoid breaking networking
selection. This could result, e.g., in auto_interworking=1 process
failing to connect if any the driver rejects requests to any of the APs
in the scan result even if some other APs provided suitable information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-07 18:38:09 +02:00
Jouni Malinen
03c961e542 Interworking: Default to EAP-MSCHAPv2 with EAP-PEAP
If the NAI Realm list indicates that EAP-PEAP is used, use EAP-MSCHAPv2
as the Phase 2 method by default if the NAI Realm list does not specify
the tunneled method.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-17 23:27:15 +02:00
Jouni Malinen
953d25ca5f HS 2.0: Fix sp_type check in ctrl_iface status command
Commit e99b4f3a14 added functionality to
check whether the current association is with the home SP. This commit
did not take into account that the domain name ANQP information could be
NULL and that could result to a NULL pointer dereference. Fix that by
validation that domain_names != NULL before calling
domain_name_list_contains().

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-17 12:12:13 +02:00
Jouni Malinen
dbea8ac7ab Interworking: Allow SSID-based network exclusion for credentials
The new excluded_ssid parameter within a cred block can be used to
excluded networks from matching with credentials.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:01:50 +02:00
Jouni Malinen
2047e596ec Interworking: Default to TTLS/MSCHAPv2 for NAI Realm list matching
If the AP does not advertize EAP parameters, default to TTLS/MSCHAPv2
when using username/password credentials.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:00:06 +02:00
Jouni Malinen
4115303bbe Document wpa_s->scan_req
Use an enum with documented values to make it easier to understand how
wpa_s->scan_req is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-25 15:55:32 +02:00
Jouni Malinen
3c8e4ec012 Interworking: Enable key_mgmt WPA-EAP-SHA256 if PMF is enabled
If the global pmf=1/2 parameter is used to enable PMF for Interworking
networks, add WPA-EAP-SHA256 to the temporary network block to allow
connection to PMF required APs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 22:31:17 +02:00
Jouni Malinen
e99b4f3a14 HS 2.0: Add Home SP FQDN and roaming/home to status command
This allows the ctrl_iface STATUS information to be used to determine
which Home SP credential (domain in the cred block) was used and whether
the network is operated by the home SP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:40 +02:00
Jouni Malinen
736d4f2d77 HS 2.0: Remove temporary network block on cred block removal
If the credential that was used to create a temporary HS 2.0 network
block is removed, remove the network block, too.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:34 +02:00
Jouni Malinen
485e3a9228 Interworking: Unshare ANQP results on explicit ANQP requests
When ANQP_GET or HS20_ANQP_GET is used to request ANQP information,
unshare the ANQP information (i.e., create a per-BSS copy of it) to
make sure the information from the specified BSS is available in case
the APs provide different information within HESSID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-10-03 14:17:41 +03:00
Jouni Malinen
93face0e06 Interworking: Support Android JB keystore with EAP-TLS
If the keystore:// prefix is used in the private_key entry, convert that
to the OpenSSL engine style configuration used for Android JB keystore.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-28 17:12:27 +03:00
Jouni Malinen
0dd5431312 Do not inform other virtual interfaces of scan results in all cases
If a connection operation is started on an interface based on scan
results, other virtual interfaces should not be information about the
results to avoid potential concurrent operations during the association
steps. Since the sibling notification of scan results received was added
as an optimization, skipping it for this type of cases is the simplest
way of avoiding unnecessary concurrent operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-13 18:07:02 -07:00
Jouni Malinen
53c9fc1df6 Interworking: Share ANQP data within homogenous ESS
If two BSS entries have the same HESSID and SSID, share the fetched ANQP
information between these BSS entries to save memory and GAS/ANQP
operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-04 17:22:42 +03:00
Jouni Malinen
7e414b21c2 Interworking: Allow EAP-SIM/AKA/AKA' override in cred block
The eap parameter in the cred block can now be used to override
automatic EAP-SIM/AKA/AKA' selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-04 16:50:52 +03:00
Jouni Malinen
476aed355a Interworking: Move BSS ANQP information into separate struct
This is an initial step in allowing the ANQP responses to be shared
among multiple BSSes if the BSSes are determined to be operating under
identical configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-04 16:22:35 +03:00
Jouni Malinen
7ff833674b Interworking: Fetch only the needed ANQP information
Use configured credentials to figure out which ANQP information needs to
be fetched and only fetch those when using Interworking network
selection. The fetch_anqp command is still fetching all ANQP
information.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 21:05:54 +03:00
Jouni Malinen
a594e2a9ab Interworking: Skip extra scan after network auto-select
If the scan results from before ANQP fetch are fresh (less than five
seconds old), do not run a new scan when selecting the BSS after having
used Interworking network selection.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 20:18:48 +03:00
Jouni Malinen
1f3a3ec4a4 Interworking: Fix build without CONFIG_PCSC=y
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 00:35:53 +03:00
Jouni Malinen
4d5bda5fca Interworking: Add optional use of network selection on normal scans
auto_interworking=1 configuration parameter can be used to request
wpa_supplicant to use Interworking network selection automatically as a
part of the normal (non-Interworking) network selection if the scan
results do not match with enabled networks. This makes scanning work
similarly to the "interworking_select auto" command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 16:14:13 +03:00
Jouni Malinen
b1f122964e Add generic GAS request mechanism
The new gas_request and gas_response_get commands can be used to request
arbitary GAS queries to be performed. These can be used with ANQP or
with other (including vendor specific) advertisement protocols.

gas_request <BSSID> <AdvProtoID> [Query]
gas_response_get <addr> <dialog token> [offset,length]

For example, ANQP query for Capability list in interactive wpa_cli
session:

> gas_request 02:00:00:00:01:00 00 000102000101
<3>GAS-RESPONSE-INFO addr=02:00:00:00:01:00 dialog_token=0
status_code=0 resp_len=32
> gas_response_get 02:00:00:00:01:00 00
01011c00010102010501070108010c01dddd0c00506f9a110200020304050607
> gas_response_get 02:00:00:00:01:00 00 0,10
01011c00010102010501
> gas_response_get 02:00:00:00:01:00 00 10,10
070108010c01dddd0c00
> gas_response_get 02:00:00:00:01:00 00 20,10
506f9a11020002030405
> gas_response_get 02:00:00:00:01:00 00 30,2
0607

It should be noted that the maximum length of the response buffer is
currently 4096 bytes which allows about 2000 bytes of the response data
to be fetched with a single gas_response_get command. If the response is
longer, it can be fetched in pieces as shown in the example above.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 18:13:10 +03:00
Jouni Malinen
632c9458c4 Interworking: Fix home SP check with real SIM card
The NAI building routine assumed that the credential included the IMSI,
but that is not the case when using a real SIM card. Build the NAI based
on the IMSI read for the card in such a case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-26 23:35:04 +03:00
Jouni Malinen
8f23401281 Interworking: Fix PLMN matching with multiple entries
The pos variable was not advanced when comparing PLMN entries in
3GPP Cellular Network information and as such, only the first
entry was really used.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-08-26 20:37:11 +03:00
Jouni Malinen
63e5caaa6f Interworking: Do not match credentials without WPA2-Enterprise
Since we currently support only HS 2.0 networks with Interworking
network selection, do not indicate credential match unless the
network uses WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:55:12 +03:00
Jouni Malinen
8601b50312 Interworking: Enforce WPA2-Enterprise/CCMP
Since we currently support only HS 2.0 networks with Interworking
network selection, enforce that WPA2-Enterprise/CCMP is used on the
AP instead of allowing any WPA-Enterprise combination.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:55:12 +03:00
Jouni Malinen
2b95f57ba5 Interworking: Do not reconnect without "auto" parameter
When there was no credential match, but an enabled network block matched
with a scan result, wpa_supplicant reconnected at the end of
interworking_select command even if "auto" parameter was not used. Fix
this by running the reconnect only if requested to automatically select
a network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:26:21 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Jouni Malinen
02af9c90fb EXT PW: Allow Interwork cred block to use external storage for password
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00