Commit graph

11669 commits

Author SHA1 Message Date
Eliad Peller
d044d2f7d8 wpa_supplicant: Get scan_result IE also from Beacon frames
No reason to require ie_len if only beacon_ie_len is given.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2016-10-29 19:28:37 +03:00
Jouni Malinen
baa8f5ba26 tests: hostapd stationary_ap=1 in neighbor DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-29 19:25:39 +03:00
David Spinadel
451a27b1ad hostapd: Add a configuration to set an AP as stationary
Add a configuration option in hostapd.conf and in neighbor report that
sets an AP as stationary. To enable this option on the current AP set
the config option stationary_ap to 1. To set a neighbor entry to be
marked as stationary add the word stat to the SET_NEIGHBOR command. This
option tells hostapd to send LCI data even if it is older than requested
by max age subelement in RRM request.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-10-29 19:16:47 +03:00
Ilan Peer
5cb59370d5 hostapd: Clear location configuration when it is reset
In case that LCI or location civic configuration is cleared,
free the buffer holding the corresponding information to avoid
cases that the information is considered as valid/useful.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-29 19:11:59 +03:00
Ilan Peer
f5ec346902 hostapd: Fix adding neighbor entry
It is possible that a LCI or location civic configuration buffer
is valid but contains no data. In such a case do not add the LCI
and location civic information to the entry in the neighbor
data base.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-29 19:10:17 +03:00
Sabrina Dubroca
99b82bf537 mka: Implement reference counting on data_key
struct data_key already had a 'user' field for reference counting, but
it was basically unused.

Add an ieee802_1x_kay_use_data_key() function to take a reference on a
key, and use ieee802_1x_kay_deinit_data_key() to release the reference.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:38:57 +03:00
Sabrina Dubroca
23c3528a84 mka: Add support for removing SAs
So that the core can notify drivers that need to perform some operations
when an SA is deleted.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:35:38 +03:00
Sabrina Dubroca
6b6175b788 mka: Sync structs definitions with IEEE Std 802.1X-2010
Document some data structures from IEEE Std 802.1X-2010, and add the
(not used yet) struct ieee802_1x_mka_dist_cak_body.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:28:29 +03:00
Sabrina Dubroca
6f551abdfc mka: Remove "channel" hacks from the stack and the macsec_qca driver
This is specific to the macsec_qca driver. The core implementation
shouldn't care about this, and only deal with the complete secure
channel, and pass this down to the driver.

Drivers that have such limitations should take care of these in their
->create functions and throw an error.

Since the core MKA no longer saves the channel number, the macsec_qca
driver must be able to recover it. Add a map (which is just an array
since it's quite short) to match SCIs to channel numbers, and lookup
functions that will be called in every place where functions would get
the channel from the core code. Getting an available channel should be
part of channel creation, instead of being a preparation step.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:24:08 +03:00
Sergei Sinyak
7d8f795003 Fix typo in DigestAlgorithn
Replace n with m in DigestAlgorithn, i.e., DigestAlgorithm.

Signed-off-by: Sergei Sinyak <serega.belarus@gmail.com>
2016-10-29 11:14:09 +03:00
Sergei Sinyak
f5c15dc179 Fix typo in eap_example_server.c
The server sends only requests to the peer,
and the peer sends only responses to the server.

Signed-off-by: Sergei Sinyak <serega.belarus@gmail.com>
2016-10-29 11:13:28 +03:00
Filip Matusiak
59d7cff7e3 AP: Disable VHT in TKIP-only configuration
This has already been done for WEP, but there's same constraint for not
allowing VTH rates in case of TKIP.

Signed-off-by: Filip Matusiak <filip.matusiak@tieto.com>
2016-10-29 00:55:49 +03:00
Avrahams Stern
847ee1aac3 wpa_supplicant: Use correct interface type when creating P2P interface
When starting ASP provisioning with connection capability set to NEW,
don't create the pending P2P interface as a GO interface because
Go negotiation will determine which side will be the GO and it is
possible that eventually this interface will become the client.
In this case, when the P2P client is started it will start scanning
and do other station specific operations while the interface type
is AP.

Instead, use type WPA_IF_P2P_GROUP when creating the interface which
means the interface type will be determined later.

Signed-off-by: Avrahams Stern <avraham.stern@intel.com>
2016-10-29 00:55:49 +03:00
Avrahams Stern
78a3b23060 P2P: Clear old P2PS provision data
Receiving a provision discovery request for an ASP service that
has auto accept set to false should result in a provision discovery
response with the status field set to "currently unavailable".
Having stale P2PS provision data, results in sending a response with
the status set to success because it is mistakenly referred to as the
follow-on provision discovery request.

Fix that by clearing stale P2PS provision data in the following cases:
 1. When provision discovery is complete
 2. When ASP services are flushed (in which case old ASP provisioning
    is no longer valid).

Signed-off-by: Avrahams Stern <avraham.stern@intel.com>
2016-10-29 00:55:49 +03:00
Arik Nemtsov
f69939ede8 P2P: Clear listen state during PD-in-FIND
drv->in_listen should be cleared whenever the state timeout is cleared,
if they were set together. If the flag is not cleared, the
p2p_listen_end() called during cancel-remain-on-channel will not restart
the search, relying on the state timeout function to do it. Use the
p2p_stop_listen_for_freq() function to clear the listen state properly.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2016-10-29 00:55:49 +03:00
Arik Nemtsov
4cc0f909b2 P2P: Clear P2PS provision state on P2P flush
Otherwise, if a P2PS provision is incomplete before the flush, it can
cause incorrect provision responses to be sent out.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2016-10-29 00:55:49 +03:00
Kevin Mahoney
a818425d1c hostapd: Added signal level to STA tracking
Add signal level information to the station tracking information. Also
make it available via the "TRACK_STA_LIST" control command.

Signed-off-by: Kevin Mahoney <k.mahoney@cablelabs.com>
2016-10-29 00:55:49 +03:00
Michael Braun
a1047f55b8 Remove duplicate dl_list_init() for global_ctrl_dst
Commit 56885eecf4 ('hostapd: Add UDP
support for ctrl_iface') added dl_list_init() for global_ctrl_dst to
hostapd_global_ctrl_iface_init().

Though, hostapd_global_ctrl_iface_init() is only called from
main.c:main(), which already initializes global_ctrl_dst unconditionally
before. Same with global_ctrl_sock.

Remove this duplicate initialization.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-29 00:55:49 +03:00
Dmitry Shmidt
3765c9705c hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2016-10-29 00:55:38 +03:00
Jouni Malinen
8618b3c221 tests: Open AP and TDLS prohibited
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-29 00:28:17 +03:00
Cedric Izoard
8c889222bc TDLS: Fix checks on prohibit bits
ext_capab/ext_capab_len do not include ID and Length so no extra +2
offset should be used. This fixes a regression from commit
faf427645a ('TDLS: Use proper IE parsing
routine for non-EAPOL-Key cases') that replaced the IE parser without
noticing the difference in the pointer offset.

Signed-off-by: Flavia Vanetti <flavia.vanetti@ceva-dsp.com>
2016-10-29 00:24:12 +03:00
Peng Xu
c2ad5b9218 nl80211: Update channel information after channel switch notification
When channel switch happens, driver wrapper's internal channel
information needs to be updated so that the new frequency will be used
in operations using drv->assoc_freq. Previously, only bss->freq was
updated and the new frequency was also indicated in the EVENT_CH_SWITCH
event. This could potentially leave out couple of cases that use
drv->assoc_freq at least as a fallback mechanism for getting the current
operating frequency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 23:58:23 +03:00
Jouni Malinen
913c3e1e83 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 19:39:13 +03:00
Jouni Malinen
81a10a9442 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
Previously, a build without IBSS RSN support tried to start/join an IBSS
even if the profile was configured with RSN parameters. This does not
work and resulted in quite confusing debug log. Make this clearer by
explicitly checking for this case and reject the connection attempt with
a clearer debug log entry instead of trying something that is known to
fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 19:33:20 +03:00
Maneesh Jain
ea06a08f85 HS 2.0 server: Remove redundant NULL check
Both devinfo and devdetail are non-NULL here due to the earlier check
within the same function.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:08:32 +03:00
Nishant Chaprana
5f99d96287 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-10-28 19:06:20 +03:00
Nishant Chaprana
230b2b2c3d Removed redundant NULL check for b in wpabuf_concat()
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-10-28 19:05:08 +03:00
Maneesh Jain
641c73f84f driver.h: Fix a typo in a comment
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:01:50 +03:00
Sunil Dutt
2e4e4fb71c nl80211: Allow TDLS trigger modes to be configured to the host driver
This commit adds a control interface command to configure the TDLS
trigger mode to the host driver. This TDLS mode is configured through
the "SET tdls_trigger_control" control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:22:33 +03:00
Sunil Dutt
14cd203fff QCA vendor command to configure the TDLS behavior in the host driver
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:12:25 +03:00
lifeng
a18563d428 Extend QCA vendor attribute link layer statistics attribute
This adds new statistics attributes to support channel hopping feature.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:05:59 +03:00
lifeng
95f3703ae1 Add more QCA vendor attribute definitions into qca-vendor.h
These attributes were previously maintained elsewhere. This commit moves
them to follow the standard assignment process through the qca-vendor.h
file in hostap.git.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:03:33 +03:00
lifeng
87416eaf64 QCA vendor attribute to report frame aggregation failure
Add a new vendor attribute config to set the reorder blocksize and
timeout in 4 ACs, and then report the frame aggregation failure
statistics in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command. In addition,
fix the spelling of the enum value for this subcommand.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 21:46:04 +03:00
Jouni Malinen
09b306b1e5 tests: Avoid failures in ap_vlan_without_station with new kernel
The kernel commit 'mac80211: filter multicast data packets on AP /
AP_VLAN' started filtering out the test frame used in
ap_vlan_without_station and that resulted in false failures. For now,
ignore that "error" case to avoid claiming failures when the kernel is
doing what it is expected to do.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 21:37:19 +03:00
Jouni Malinen
b64fa750b6 tests: Enable FILS in the example hwsim build configurations
This allows the new FILS test cases to be executed automatically when a
recent enough kernel version is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:13 +03:00
Jouni Malinen
befdb2dc8d nl80211: Check driver FILS capability
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:06 +03:00
Jouni Malinen
40a4572738 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
This sends the FILS KEK and AAD context (nonces) to the driver with the
NL80211_CMD_ASSOCIATE messages when using FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
d8f9342d03 nl80211: Add support for setting FILS authentication algorithm
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
e76e950eac Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-10-27.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-27 15:02:08 +03:00
Jouni Malinen
2a0b86d319 Note set_key(WPA_ALG_NONE) failure in debug log
This makes wpa_remove_ptk() call to wpa_auth_set_key() more consistent
with all the other calls that verify the return value to keep static
analyzers happier.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
7d8da7c837 tests: FILS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
061dac1d3c FILS: Claim FILS capability only if driver supports it
"GET_CAPABILITY fils" used to return "FILS" based on wpa_supplicant
configuration. This can be made more useful by checking both for
wpa_supplicant and driver support for FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
ff338fab92 FILS: Setup EAPOL state machines properly after FILS association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
da24c5aa1c FILS: Set TK after association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
07e0117d21 FILS: Mark connection fully authorized after FILS Association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:20:04 +03:00
Jouni Malinen
706df4291b FILS: Association Response processing (STA)
Decrypt the AES-SIV protected elements and verify Key-Auth. Parse and
configure keys to the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:20:04 +03:00
Jouni Malinen
e73ffa0925 FILS: Add Association Response frame elements and encrypt them (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:42:52 +03:00
Jouni Malinen
78815f3dde FILS: Decrypt Association Request elements and check Key-Auth (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:42:52 +03:00
Jouni Malinen
86cd6928e0 FILS: Add elements to FILS Association Request frame
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:01:06 +03:00
Jouni Malinen
ac56c39532 driver: Add option to pass FILS KEK/AAD to the driver for association
This allows the FILS KEK and AAD data (nonces) to be configured to the
driver for association so that the driver can encrypt the
(Re)Association Request frame and decrypt the (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-24 23:07:56 +03:00