Commit graph

13646 commits

Author SHA1 Message Date
Sean Parkinson
f08362e9ce tests: Use same certificates as used for GnuTLS with wolfSSL
Signed-off-by: Sean Parkinson <sean@wolfssl.com>
2018-05-02 00:37:57 +03:00
Sean Parkinson
7d5df79f2d tests: Use a valid key exchange value in eap_proto_ikev2
Signed-off-by: Sean Parkinson <sean@wolfssl.com>
2018-05-02 00:37:38 +03:00
Jouni Malinen
832b736fb2 tests: Add TLS v1.3 into ap_wpa2_eap_tls_versions
When running with OpenSSL 1.1.1, verify that EAP-TLS can be used with
TLS v1.3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
1150d0756a tests: Enable TLS v1.3 explicitly in the authentication server
For testing purposes, enable TLS v1.3 in the authentication server so
that the protocol version can be controlled from wpa_supplicant side
more easily.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
d501c27cfe EAP-TLS server: Disable TLS v1.3 by default
The current EAP peer implementation is not yet ready for the TLS v1.3
changes with EAP-TTLS, EAP-PEAP, and EAP-FAST, so disable TLS v1.3 for
this EAP method for now.

While the current EAP-TLS implementation is more or less complete for
TLS v1.3, there has been no interoperability testing with other
implementations, so disable for by default for now until there has been
chance to confirm that no significant interoperability issues show up
with TLS version update. tls_flags=[ENABLE-TLSv1.3] configuration
parameter can be used to enable TLS v1.3 (assuming the TLS library
supports it; e.g., when using OpenSSL 1.1.1).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
e8a7af9a38 EAP-TLS peer: Disable TLS v1.3 by default
The current EAP peer implementation is not yet ready for the TLS v1.3
changes with EAP-TTLS, EAP-PEAP, and EAP-FAST, so disable TLS v1.3 for
this EAP method for now.

While the current EAP-TLS implementation is more or less complete for
TLS v1.3, there has been no interoperability testing with other
implementations, so disable for by default for now until there has been
chance to confirm that no significant interoperability issues show up
with TLS version update. phase1="tls_disable_tlsv1_3=0" configuration
parameter can be used to enable TLS v1.3 (assuming the TLS library
supports it; e.g., when using OpenSSL 1.1.1).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
bbbc7e8016 EAP-TLS: Extend TLS version config to allow TLS v1.3 to be disabled
This may be needed to avoid interoperability issues with the new
protocol version and significant changes for EAP use cases in both key
derivation and handshake termination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
0d34c13a72 tests: Ignore openssl_cipher_suite_config_hapd failure (OpenSSL 1.1.1)
It looks like OpenSSL 1.1.1 accepted the openssl_ciphers=FOO test
configuration or well, at least does not reject it like previous
versions did. For now, ignore this failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
53b34578f3 OpenSSL: Move server vs. client information into connection data
This makes this more easily available throughout the handshake
processing, if needed, compared to having to pass through the function
argument through the full path from
tls_connection{,_server}_handshake().

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 21:45:29 +03:00
Jouni Malinen
0de820b333 EAP-TLS peer: MSK/EMSK derivation with TLS v1.3
Use new MSK/EMSK derivation mechanism if TLS v1.3 or newer is used per
draft-mattsson-eap-tls13-02.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:53:07 +03:00
Jouni Malinen
1854981c78 EAP-TLS peer: Allow NewSessionTicket after Client Finished with TLS v1.3
The EAP session cannot be marked fully completed on sending Client
Finished with TLS v1.3 since the server may still send NewSessionTicket
before EAP-Success.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:51:34 +03:00
Jouni Malinen
6dd98483eb EAP-TLS peer: Support fragmentation of last message
With TLS v1.3, the Finished message from the client can require
fragmentation. Postpone key derivation and marking of the EAP session
fully completed until all the fragments of that last message are sent to
avoid losing all the subsequent fragments.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:49:19 +03:00
Jouni Malinen
a80423b521 EAP-TLS server: MSK/EMSK derivation with TLS v1.3
Use new MSK/EMSK derivation mechanism if TLS v1.3 or newer is used per
draft-mattsson-eap-tls13-02.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:47:22 +03:00
Jouni Malinen
bac1bdba3e EAP-TLS peer: Determine whether TLS v1.3 or newer is used
This is needed to be able to handle different key derivation and message
handshakes in EAP implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:45:37 +03:00
Jouni Malinen
fe7b06c5e1 EAP-TLS server: Determine whether TLS v1.3 or newer is used
This is needed to be able to handle different key derivation and message
handshakes in EAP implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:44:22 +03:00
Jouni Malinen
c26ac18958 Mark eap_server_tls_derive_key() label argument const
This value is going to be used only with a helper function that takes it
in as a const value, so use the same style here to simplify callers in
upcoming TLS v1.3 changes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:43:24 +03:00
Jouni Malinen
34c6949fb7 EAP-TLS server: Remove trailing whitespace
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 17:40:58 +03:00
Jouni Malinen
4a576c4736 OpenSSL: Terminate TLS handshake if ClientHello cannot be generated
OpenSSL 1.1.1 added cases where ClientHello generation may fail due to
"no ciphers available". There is no point in sending out the resulting
TLS Alert message to the server since the server does not know what to
do with it before ClientHello. Instead, simply terminate the TLS
handshake locally and report EAP failure to avoid getting stuck waiting
for a timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 13:23:25 +03:00
Jouni Malinen
a61ee84d0c tests: Fix ap_wpa2_eap_fast_cipher_suites with OpenSSL 1.1.1
RC4-SHA cipher case ended up allowing the handshake to be started just
to fail with "no ciphers available" when trying to generate ClientHello.
Fix this by handling an EAP failure case for the RC4-SHA test step with
OpenSSL 1.1.*.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 13:23:25 +03:00
Jouni Malinen
2439714f90 DPP: Fix testing code for invalid keys with OpenSSL 1.1.1
OpenSSL started reporting failures from
EC_POINT_set_affine_coordinates_GFp() similarly to BoringSSL, so use the
same workaround to enable this protocol testing case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 12:02:57 +03:00
Jouni Malinen
c456e6e3f7 HS 2.0: Terms and Conditions server and management
Add minimal Terms and Conditions server for testing purposes. This can
be used to test user interaction for Terms and Conditions acceptance.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 21:04:11 +03:00
Jouni Malinen
42f4169166 HS 2.0: Update server SQL DB initialization to cover new fields
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 20:19:32 +03:00
Jouni Malinen
5bd5eb54d1 HS 2.0: Update server instructions for Ubuntu 16.04
Some of the Ubuntu package names have changed for PHP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 20:19:32 +03:00
Jouni Malinen
edc4374ef5 tests: pending_tc table check for HS 2.0 Terms and Conditions
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 20:19:32 +03:00
Jouni Malinen
04ee197f87 HS 2.0: Maintain a database of pending T&C acceptance sessions
The new SQLite table pending_tc is used to maintain a list of sessions
that need to accept Terms and Conditions. This information can be used
on an external Terms and Conditions server to map the incoming MAC
address information into user identity.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 20:12:36 +03:00
Jouni Malinen
625a8c86ba wpa_cli: Indicate HS20-T-C-ACCEPTANCE to action scripts
This can be used to start a web browser to go through Terms and
Conditions acknowledgment.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-29 20:02:13 +03:00
Karthikeyan Periyasamy
6b21df0bb7 Add QCA vendor command/attr to filter frames from other BSSs
Add commands to allow an AP to configure filtering rules to capture
frames from stations that are active on the operating channel, but
not associated to this AP. Operations include add/delete the filter
and get the statistics information of the unassociated stations.

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
2018-04-26 17:56:22 +03:00
Jouni Malinen
6444b08cea tests: Hotspot 2.0 Terms and Conditions using SQLite for user DB
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-26 17:56:22 +03:00
Jouni Malinen
4526038092 HS 2.0: Terms and Conditions testing feature in authentication server
Allow hostapd RADIUS authentication server with SQLite EAP user DB to be
used for testing Terms and Conditions functionality. This could be used
for the HO AAA part of functionality (merging HO AAA and SP AAA into a
single component to avoid separate RADIUS proxy in testing setup).

A T&C server with HTTPS processing is needed to allow this to be used
for full over-the-air testing. This commit adds sufficient functionality
to allow hwsim test cases to cover the RADIUS server part.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-26 17:56:22 +03:00
Jouni Malinen
045c7c6817 tests: Hotspot 2.0 Terms and Conditions signaling - CoA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-25 12:57:46 +03:00
Jouni Malinen
f456940ef3 HS 2.0: CoA-Request processing for Terms and Conditions filtering
Extend RADIUS DAS to support CoA-Request packets for the case where the
HS 2.0 Terms And Conditions filtering VSA is used to remove filtering.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-25 12:57:46 +03:00
mazumdar
d239ab3962 DFS: Mark channels required DFS based on reg-domain info from the driver
Mark a channel as required DFS based on regulatory information received
from the driver/kernel rather than deciding based on hardcoded
boundaries on the frequency. Previously few channels were being marked
as requiring DFS even though they were non-DFS in a particular country.

If the driver does not provide channel list information, fall back to
the previously used frequency-based determination.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
0f7fc6b98d tests: Hotspot 2.0 Terms and Conditions signaling
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
7fc6a024f9 HS 2.0: Process received Terms and Conditions Acceptance notification
Extend wpa_supplicant WNM-Notification RX handling to parse and process
received Terms and Conditions Acceptance notifications. If PMF is
enabled for the association, this frame results in control interface
indication (HS20-T-C-ACCEPTANCE <URL>) to get upper layers to guide the
user through the required acceptance steps.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
8760b9848c HS 2.0: Send Terms and Conditions Acceptance notification
This extends hostapd Access-Accept processing to check if the RADIUS
server indicated that Terms and Conditions Acceptance is required. The
new hs20_t_c_server_url parameter is used to specify the server URL
template that the STA is requested to visit.

This commit does not enable any kind of filtering, i.e., only the part
of forwarding a request from Access-Accept to the STA using
WNM-Notification is covered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
6cb8f4f382 HS 2.0: Terms and Conditions attributes in Access-Request messages
This extends hostapd with two new configuration parameters
(hs20_t_c_filename and hs20_t_c_timestamp) that can be used to specify
that the Terms and Conditions attributes are to be added into all
Access-Request messages for Hotspot 2.0 STAs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
c3d45e130a tests: WDS STA interface events and STA command output
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Bhagavathi Perumal S
1952b626ba hostapd: Add ctrl iface indications for WDS STA interface
This allows user to get event indication when a new interface is
added/removed for 4addr WDS STA and also WDS STA ifname is informed
through the STA command.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
2598e69303 FILS: Enable SHA256 KDF even without PMF/SAE in the build
While it is unlikely that FILS would be used without PMF or SAE in the
build, it is possible to generate such a build and as such, it would be
good for the KDF selection to work properly. Add CONFIG_FILS as an
independent condition for the SHA256-based KDF. Previously, this
combination would have resulted in failure to derive keys and terminated
key management exchange.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
1baa130bd0 nl80211: Print NL80211_CMD_SET_POWER_SAVE errors in debug log
This makes it easier to understand what happened with PS configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
24b5b786e6 tests: WPA2-PSK/GCMP/CCMP ciphers
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
72b6e5d1e2 Do not remove CCMP group cipher if any CCMP/GCMP cipher is enabled
CCMP group cipher was removed if CCMP was not allowed as a pairwise
cipher when loading a configuration file (but not actually when changing
configuration during runtime). This is needed to avoid issues with
configurations that use the default group cipher (TKIP CCMP) while
modifying pairwise cipher from the default CCMP TKIP) to TKIP. However,
there is not really a need to remove the CCMP group cipher if any GCMP
or CCMP cipher is enabled as a pairwise cipher.

Change the network profile validation routine to not remove CCMP as
group cipher if CCMP-256, GCMP, or GCMP-256 is enabled as a pairwise
cipher even if CCMP is not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:43 +03:00
Andrei Otcheretianski
440e9f0bbe tests: Async. AP setup failure with wpa_supplicant
Verify that the AP initialization failure is reported back to
wpa_supplicant also when the initialization is complete in a callback.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-04-20 00:50:25 +03:00
Tova Mussai
c4315e6620 AP: Handle AP initalization failure in async flow
When AP initialization is completed in a callback (e.g., OBSS scan),
wpa_supplicant_deinit_ap() is not called in case of failure. Fix this by
calling setup_complete_cb in case of failure, too, which in turn calls
wpa_supplicant_deinit_ap() if needed.

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
2018-04-20 00:48:49 +03:00
Ahmad Masri
86c998d37a FT: Add FT auth algorithm to connect params when roaming
Add WPA FT auth to connect params in case of a re-connection to ESS
supporting FT when FT was used in the first connect.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:35:41 +03:00
Ahmad Masri
3dc3afe298 FT: Add MDE to assoc request IEs in connect params
Add MDE (mobility domain element) to Association Request frame IEs in
the driver assoc params. wpa_supplicant will add MDE only if the network
profile allows FT, the selected AP supports FT, and the mobility domain
ID matches.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:32:49 +03:00
Bhagavathi Perumal S
b55c623e4c Make CENTER_FRQ1 available independently in SIGNAL_POLL
This allows user to get center frequency and find secondary channel
offset.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-20 00:10:45 +03:00
Jouni Malinen
4204669c69 HS 2.0: Add Roaming Consortium Selection element into AssocReq
This makes wpa_supplicant add Hotspot 2.0 Roaming Consortium Selection
element into (Re)Association Request frames if the network profile
includes roaming_consortium_selection parameter.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-18 01:12:25 +03:00
Jouni Malinen
ad5704631a tests: roaming_consortium_selection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-18 01:12:23 +03:00
Jouni Malinen
6311547e7b HS 2.0: Add Roaming Consortium Selection network profile parameter
This adds new roaming_consortium_selection network profile parameter
into wpa_supplicant. This is used to store the OI that was used for
network selection (INTERWORKING_SELECT) based on matching against the
Roaming Consortium OIs advertised by the AP. This can also be used when
using an external component to perform selection.

This commit adds the network profile parameter, but does not yet include
it in (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:56 +03:00