Commit graph

8314 commits

Author SHA1 Message Date
Jouni Malinen
ff013b94ca Fix CONFIG_OS=internal build
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
David Woodhouse
7d9286d3e7 Support private_key_passwd for GnuTLS (3.1.11+)
It's possible to jump through hoops to support it in older versions too,
but that seems a little unnecessary at this point.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-12-25 16:37:12 +02:00
Jouni Malinen
cbe23ffd6d GnuTLS: Get rid of warnings about deprecated typedef names
'_t' suffix for gnutls_session and gnutls_transport_ptr was added in
GnuTLS 1.1.11 over ten years ago and the more recent versions of GnuTLS
have started forcing compiler warnings from the old names. Move to the
new names and don't bother about backwards compatibility with older
versions taken into account how long ago this change happened in GnuTLS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
36f0cf3774 privsep: Fix compilation due to associate() parameter updates
struct wpa_driver_associate_params moved to using struct
hostapd_freq_params instead of just frequency. Need to update wpa_priv
to do same.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
eae3df7ee4 P2P: Fix memory leak on GO startup failure path
Some of the struct hostapd_data variables get initialized with allocated
memory in the P2P GO case even before hapd->started has been set to 1.
As such, hostapd_free_hapd_data() needs to free these even if
!hapd->stated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
c715b31f18 tests: Clear active PBC mode from cfg80211 BSS table in p2p_channel
This reduces number of test combinations in which PBC session overlap
could have been indicated incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
4a393fe9f8 WPS: Do not indicate PBC overlap for the same BSS
Even if the UUID would have a mismatch, e.g., due to no UUID known for
the target in a new WPS PBC instance, do not indicate PBC session
overlap if the BSSID is same in the two entries. This should not really
happen in normal use cases, but can happen at least in some test
scenarios where the same BSSID is used in consecutive test cases and the
old BSS entry remains in cfg80211 cache.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
dd859e20ac tests: Make p2p_channel test cases more robust
Wait for a CTRL-EVENT-REGDOM-CHANGE even before returning from
set_country() to avoid issues with test operations being executed before
all components have had chance to update their regulatory domain
information. Some of these test cases could fail under heavy load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
1f4de34ec1 tests: Maintain test result counters through the run
This avoids having to go through the full output buffer from each
VM for each update during a test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
8041102874 tests: Process VM stdout output in full lines
Merge partial lines together before processing them in parallel-vm.py.
This avoids issues in cases where the stdout read gets split into pieces
that do not include the full READY/PASS/FAIL/SKIP information. In
addition, strip unnecessary whitespace (mainly, '\r') from the log
lines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
1942b68172 tests: Disable terminal echo for stdin control (-i)
This makes vm-run.sh output cleaner to parse for parallel-vm.py.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
2e0d48e5c8 tests: Do not print to stdout during test execution
This cleans up vm-run.sh output and makes information more easily
available from the *.log files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
d3fb9c1403 tests: Add debug logging for parallel-vm.py
parallel-vm.log is now written with details of test execution steps and
results. This makes it easier to debug if something goes wrong in VM
monitoring. The --debug option can be used to enable verbose debugging.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:36:51 +02:00
Jouni Malinen
3eb1db0377 tests: Retry failed cases automatically in parallel VM run
parallel-vm.py is now retrying failed cases once at the end of the run.
If all the failed test cases passed on the second attempt, that is noted
in the summary output. Results are also indicated as the exit value from
the run: 0 = all cases passed on first run, 1 = some cases failed once,
but everything passed after one retry, 2 = some cases failed did not
succeed at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 22:25:29 +02:00
Jouni Malinen
a628eeb42b tests: Add more long duration test cases to parallel-vm.py list
This adds the remaining test cases that took more than 15 seconds to run
into the list of test cases to run at the beginning of the execution to
avoid these being left at the end when only some of the VMs may be
running.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 20:34:13 +02:00
Jouni Malinen
40e7639600 nl80211: Check if_indextoname() return value for bridge events
It would be at least theoretically possible for the bridge netdev to
have disappeared at the time hostapd processes the RTM newlink/dellink
message. As such, it is better to verify that if_indextoname() actually
returned success before printing the bridge ifname in debug. In
addition, there is not much point trying to add the bridge ifindex into
the list of own ifindexes in case the interface has already been
removed, so skip that part as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 19:43:24 +02:00
Jouni Malinen
6d930a1eef tests: Optimize ap_qosmap test cases
Avoid unnecessary DATA_TEST_CONFIG calls and wlantest_cli invocations to
speed up the test cases. This drops ap_qosmap execution time from about
14 seconds to under 3 seconds.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 17:46:34 +02:00
Jouni Malinen
4905f1ebfe tests: Optimize multi_check() waits in ap_bss_add* and ap_multi_bss*
There is no need to wait for the longer fixed duration for each STA when
an event message or an earlier wait for another STA can be used instead.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 17:20:18 +02:00
Jouni Malinen
610cfff5d7 tests: Make scan_hidden* more robust
Clear cfg80211 BSS table more carefully after the scan_hidden* test
cases. At least scan_hidden_many could have left behind a hidden SSID
entry that could cause problems for following scan_bss_operations test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 16:15:11 +02:00
Jouni Malinen
3a322496f9 mesh: Delay Authentication frame process with no_auto_peer
There is a possible race condition between receiving the
NEW_PEER_CANDIDATE event and the Authentication frame from the peer.
Previously, if the Authentication frame RX event was indicated first,
that frame got dropped silently. Now, this frame is still dropped, but a
copy of it is stored and the frame gets processed on the following
NEW_PEER_CANDIDATE event if that is received for the same peer within
two seconds.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 13:44:38 +02:00
Jouni Malinen
e0cfd223c0 tests: Fix mesh no_auto_peer=1 test cases to allow enough time for retry
If the initial Authentication frame was too early for the peer (i.e.,
NEW_PEER_CANDIDATE event arrived only after the Authentication frame),
wpas_mesh_open_no_auto and wpas_mesh_secure_no_auto test cases were
failing since they waited only for 10 seconds for the connection to be
completed while the retry timer was set to 10-20 seconds on the
authenticator side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 13:10:22 +02:00
Jouni Malinen
9828b70ebd tests: Fix wpas_ctrl_data_test with Linux 3.19-rc1
The kernel commit 'packet: make packet_snd fail on len smaller than l2
header' started rejecting <= 14 octet raw packet socket transmission.
This test case was testing with 14 ocets and that is now rejected by the
kernel. While this may be a kernel side issue, use one octet longer test
data for now to avoid undesired FAIL cases in hwsim tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 12:27:14 +02:00
Jouni Malinen
b2eb3fe21c tests: Fix ap_ht_40mhz_intolerant_ap
The previous design did not actually break from the wait loop when the
AP changed back to 40 MHz channel and as such, ended up waiting the full
30 second time. Furthermore, the five second delay time for returning
back to 40 MHz was not sufficiently long to test behavior correctly
since the STA did not have any chances of returning the next coex report
before the AP had returned to 40 MHz. Increase the AP wait time to 15
seconds so that the once per 10 seconds OBSS scan from the STA gets in
before changing back to 40 MHz channel (after the 40 MHz intolerant AP
gets disabled).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 22:07:54 +02:00
Jouni Malinen
d97a3c4885 SME: Optimize OBSS scanning
Include only the potentially affected channel range in OBSS scans to
reduce the amount of offchannel time needed for scanning when requested
by the AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 22:07:03 +02:00
Jouni Malinen
0acc2c809d HT: More robust 20/40 coex Action frame parsing
Commit 587d60d2b7 ('Add AP mode support
for HT 20/40 co-ex Action frame') added processing of co-ex report, but
did not include proper bounds checking or IE type checking for the
payload. Furthermore, this was not ready for the possible extensibility
of the 20/40 BSS Coexistence element.

Fix these by checking IE ids for both elements and doing more
apprioriate bounds checking for the element lengths to avoid potentially
reading beyond the frame buffer. Though, the event receive buffer in
both libnl and driver_nl80211_monitor.c is sufficiently large to make it
very unlikely that the maximum read of about 260 bytes beyond the end of
the Action frame would really have any chances of hitting the end of the
memory buffer, so the practical effect of missing bounds checking would
have been possibly accepting an invalid report frame and moving to 20
MHz channel unnecessarily.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 21:54:11 +02:00
Jouni Malinen
2a32ad66da HT: Fix 20/40 coex Action frame parsing
Commit 5ce3ae4c8f tried to clean up
fetching a pointer to the action code field, but it forgot to add
IEEE80211_HDRLEN to the pointer. This resulted in the coex report
elements being read from too early in the frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 20:41:19 +02:00
Jouni Malinen
6ac593ec47 tests: Optimize run-tests.py test case dict iteration
Use a single iteration through the module dictionary rather than
iterating over the keys and separately fetching values to get the
function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 20:08:11 +02:00
Jouni Malinen
4cfe369b98 tests: Optimize stop.sh wait times
There is no need to wait for fixed 0.5 seconds for the processes to
exit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 19:37:08 +02:00
Jouni Malinen
b350009f8c tests: Optimize start.sh execution time
There is no need to wait for one extra second to chown log files when
running as root which is always the case in VM execution.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 19:22:42 +02:00
Jouni Malinen
ce20a3702c nl80211: Remove practically unused process_drv_event()
This was used in the past, but all the event processing is now either
through process_global_event() or process_bss_event().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 16:12:11 +02:00
Jouni Malinen
a69d0cdc72 tests: Merge grpform_cred_ready_timeout test cases into a single one
These test cases had a long 120 seconds wait for the GO Negotiation
initiator to time out. This can be done using two devices in parallel to
save two minutes from total test execution time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 15:54:30 +02:00
Jouni Malinen
267ac3bcd6 Add more debug prints for WPA/RSN selection issues for connection
ap_ft_sae test case managed to hit a somewhat unclear error case which
resulted in "WPA: Failed to select WPA/RSN" print and not enough
information to figure out what exactly had went wrong.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 13:49:52 +02:00
Jouni Malinen
9be2b811d4 tests: Mesh max peering limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:53:02 +02:00
Jouni Malinen
4b9481bcd8 tests: Remove unnecessary wrap_wpas_mesh_test() complexity
This function did not seem to do anything else apart from making it less
obvious that hwsim_utils.test_connectivity() is called.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:52:54 +02:00
Masashi Honma
d5b95325de mesh: Fill Number of Peerings field in Mesh Formation Info
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:59:40 +02:00
Masashi Honma
46e8d90f6a mesh: Add debug message when peering limit is reached
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:55:44 +02:00
Masashi Honma
4b4093686b mesh: Make maximum number of peer links configurable
Maximum number of peer links is maximum number of connecting mesh peers
at the same time. This value is 0..255 based on the
dot11MeshNumberOfPeerings range.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:52:31 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Masashi Honma
9c58c5f72c mesh: Make beacon interval configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:38:20 +02:00
Masashi Honma
3b797130d7 doc: Remove error on document creation
Unexpected trailing zero causes following error.

wpa_supplicant.sgml:472:53:E: character data is not allowed here

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:36:55 +02:00
Jouni Malinen
5554fbef46 tests: Make parallel VM start a bit more resource friendly
Wait one second between each kvm start to avoid hitting large number of
processes trying to start in parallel. This allows the VMs to be started
more efficiently for parallel-vm.py runs with large number of VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 22:04:54 +02:00
Jouni Malinen
b3f4134912 tests: Clear cfg80211 BSS table at the end of scan_hidden
It was possible for the hidden SSID entry to leak into following test
cases and result in failures, e.g., in this sequence:

scan_hidden
scan_reqs_with_non_scan_radio_work
radius_auth_unreachable
wep_open_auth

BSS <BSSID> picked incorrect BSS entry within wpa_supplicant due to the
old zero-length SSID showing up from the earlier hidden SSID case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 21:58:47 +02:00
Jouni Malinen
2ffbf34db0 tests: Optimize test case execution order for multiple VMs
Move test cases with long duration to the beginning as an optimization
to avoid last part of the test execution running a long duration test
case on a single VM while all other VMs have already completed their
work.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 18:20:15 +02:00
Jouni Malinen
422ba11e30 Flush WPS registrar state on wpa_supplicant FLUSH command
This helps hwsim test cases by avoiding undesired state from previously
executed test cases affecting following tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:47:42 +02:00
Jouni Malinen
01c87519a3 tests: Do not mark proxyarp_open failed if ebtables is not available
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:14:00 +02:00
Jouni Malinen
f24489d94f tests: Use new scripts for vm-run.sh codecov
Now there is only one set of commands to maintain. The separate reports
for individual components have not been of much use in the past, so they
are dropped for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:41:59 +02:00
Jouni Malinen
cb0555f7be tests: EAP-IKEv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:16:26 +02:00
Jouni Malinen
8779ac8a67 EAP-IKEv2: Fix a typo in a debug message
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 13:19:14 +02:00
Jouni Malinen
bb68a6e3cc EAP-IKEv2 peer: Fix fragmentation reassembly
ret->ignore needs to be cleared to FALSE when sending fragment ack
message to avoid ignoring the fragment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 00:48:24 +02:00
Jouni Malinen
8e5c1ec32f EAP-IKEv2: Add explicit limit for maximum message length
This avoids accepting unnecessarily large memory allocations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 00:25:16 +02:00