Commit graph

520 commits

Author SHA1 Message Date
Jouni Malinen
b6f961ab25 Avoid undefined behavior in pointer arithmetic in IE parsing
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
7b5880fcf4 FT: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
ca33a5e895 Add "git describe" based version string postfix
If hostapd or wpa_supplicant is built from a git repository, add a
VERSION_STR postfix from the current git branch state. This is from "git
describe --dirty=+". VERSION_STR will thus look something like
"2.6-devel-hostap_2_5-132-g4363c0d+" for development builds from a
modified repository.

This behavior is enabled automatically if a build within git repository
is detected (based on ../.git existing). This can be disabled with
CONFIG_NO_GITVER=y in wpa_supplicant/.config and hostapd/.config.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-16 22:20:55 +03:00
Jouni Malinen
207976f053 Fix Suite B 192-bit AKM to use proper PMK length
In addition to the PTK length increasing, the length of the PMK was
increased (from 256 to 384 bits) for the 00-0f-ac:12 AKM. This part was
missing from the initial implementation and a fixed length (256-bit) PMK
was used for all AKMs.

Fix this by adding more complete support for variable length PMK and use
384 bits from MSK instead of 256 bits when using this AKM. This is not
backwards compatible with the earlier implementations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
3f21b311b2 Interworking: Define new ANQP-element Info IDs
This adds the full set on ANQP-elements based on IEEE P802.11REVmc/D4.2.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
fa53d74c9e Handle VHT operating classes correctly
Fix and extend the ieee80211_freq_to_channel_ext() function to deal
correctly with VHT operating classes (128, 129, 130).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 21:35:08 +03:00
Andrei Otcheretianski
6315bfdba2 Add support for eCSA
Extended channel switch provides an ability to switch between operating
classes and is required for P2P Devices by the P2P specification when
switching in 5 GHz.

When the operating class is provided for channel switch, the AP/P2P GO
will use eCSA IE in addition to the regular CSA IE both on 2.4 GHz and 5
GHz bands.

Transitions between different hw_modes are not supported.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 20:00:50 +03:00
Kanchanapally, Vidyullatha
94fb165c3a Add QCA vendor definitions for simultaneous offchannel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
b48567195d Add QCA vendor definitions for vendor scan support
Introduce definitions for QCA vendor specific subcommands
and attributes to support vendor scan request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Jouni Malinen
d02180c679 The master branch is now used for v2.6 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-27 22:12:07 +03:00
Jouni Malinen
1f344cd7b4 Change version information for the 2.5 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-27 22:02:05 +03:00
Amarnath Hullur Subramanyam
10cac5b1a2 Android: Set ctrl_iface client socket group (AID_WIFI) separately
Split chown() call in wpa_ctrl_open() and wpa_ctrl_open2() to allow the
group id to be set even if the process does not have privileges to
change the owner. This is needed for modules that need to communicate
with wpa_supplicant since without the group change, wpa_supplicant may
not have privileges to send the response to a control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-24 13:15:57 +03:00
Jouni Malinen
0e2412d086 Add option to reject authentication on 2.4 GHz from dualband STA
The new no_auth_if_seen_on=<ifname> parameter can now be used to
configure hostapd to reject authentication from a station that was seen
on another radio.

This can be used with enabled track_sta_max_num configuration on another
interface controlled by the same hostapd process to reject
authentication attempts from a station that has been detected to be
capable of operating on another band, e.g., to try to reduce likelihood
of the station selecting a 2.4 GHz BSS when the AP operates both a 2.4
GHz and 5 GHz BSS concurrently.

Note: Enabling this can cause connectivity issues and increase latency for
connecting with the AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
ec4387f9c9 Indicate CTRL-EVENT-AUTH-REJECT event on authentication rejection
This allows control interface monitors to get more detailed information
in cases where wpa_supplicant-based SME receives an Authentication frame
with non-zero status code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
6ebe816be0 wpa_priv: Add authentication command and event
These are needed to work with nl80211 driver interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 13:21:17 +03:00
Jouni Malinen
06f52b12f9 wpa_priv: Add support for EVENT_SCAN_STARTED
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 12:39:11 +03:00
Manikandan Mohan
4ae7120919 Allow wpa_cli/hostapd_cli client socket directory to be specified
This adds a new helper function wpa_ctrl_open2() that can be used
instead of wpa_ctrl_open() to override the default client socket
directory. Add optional -s<directory path> argument to hostapd_cli and
wpa_cli to allow the client socket directory to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-01 11:17:43 +03:00
Jouni Malinen
d9c807cab1 Fix key derivation for Suite B 192-bit AKM to use SHA384
While the EAPOL-Key MIC derivation was already changed from SHA256 to
SHA384 for the Suite B 192-bit AKM, KDF had not been updated similarly.
Fix this by using HMAC-SHA384 instead of HMAC-SHA256 when deriving PTK
from PMK when using the Suite B 192-bit AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-27 20:42:14 +03:00
Amit Khatri
6995536fa4 Fix a typo in enum wpa_states comment
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-08-08 23:48:33 +03:00
Jouni Malinen
3bc25adbbc Fix PMKID addition to RSN element when RSN Capabilities are not present
This code path could not be hit with the RSNE generated by hostapd or
wpa_supplicant, but it is now possible to reach when using
own_ie_override test functionality. The RSNE and IE buffer length were
not updated correct in case wpa_insert_pmkid() had to add the RSN
Capabilities field.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 19:21:38 +03:00
Andrei Otcheretianski
793ea13e2b Share freq-to-channel conversion function
Add ieee80211_freq_to_channel_ext() conversion function into
ieee802_11_common.c. This function converts freq to channel and
additionally computes operating class, based on provided HT and VHT
parameters.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-08-03 23:55:46 +03:00
Ahmad Kholaif
9baaac2d84 Add parsing of preferred frequency list element
This adds parsing of QCA vendor specific elements and as the first such
element to be parsed, stores pointers to the preferred frequency list
element that can be used to enhance P2P channel negotiation behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Jouni Malinen
b43b2b5203 Define new registry for QCA vendor specific elements
The new enum qca_vendor_element_id registry is used to manage
assignments of vendor specific elements using the QCA OUI 00:13:74. The
initial assignment is for the purpose for extending P2P functionality
for cases where the wpa_supplicant implementation is used by both ends
of an exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:47 +03:00
Peng Xu
d0cdccd307 Fix generating offloaded ACS channel list when hw_mode is set to any
When ACS is offloaded to device driver and the hw_mode parameter is set
to any, the current_mode structure is NULL which fails the ACS command.
Fix this by populating the ACS channel list with channels from all bands
when current_mode is NULL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 23:22:24 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Max Stepanov
c3ddf2c798 P2PS: Add CPT handling on PD request and response
On PD Request/follow-on PD Request preparation set a feature capability
CPT value of PD context.

On PD Request processing use a request CPT and service advertisement
CPT priority list to select a feature capability CPT of PD Response.

On follow-on PD Request processing use a request CPT and a CPT priority
list in PD context to select a CPT value of follow on PD Response.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
e2b7fbf2fb P2PS: Add CPT parameter to P2P_SERVICE_ADD asp command
Add Coordination Transport Protocol parameter to P2P_SERVICE_ADD
asp command.

Extend p2ps_advertisement structure to contain CPT priorities
and a supported CPT bitmask.

The format of the new parameter:
    cpt=<cpt>[:<cpt>]

where <cpt> is a name of the Coordination Protocol Transport.
This implementation supports two CPT names: UDP and MAC.
The order of specified CPTs defines their priorities where
the first one has the highest priority.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Ahmad Kholaif
6b0ceee929 Add QCA vendor definitions for multi-port concurrency
Introduce definitions for QCA vendor specific subcommands and attributes
to support multiport concurrency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 11:50:01 +03:00
Ravi Joshi
d71bdfbd83 Add QCA vendor command for updating gateway parameters
Add vendor command for updating gateway parameters to the driver.

Signed-off-by: Ravi Joshi <ravij@qca.qualcomm.com>
2015-07-21 13:20:08 +03:00
Jouni Malinen
9721b083f4 FST: Remove the IE header len/size macros
These are confusing when the style used with the couple of FST IE checks
differs from the rest of hostapd/wpa_supplicant implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:06:48 +03:00
Anton Nayshtut
3794af2dc1 FST: wpa_supplicant control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
659a1605d8 Parsing of multi band element
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
717333f4e4 FST: Add the Fast Session Transfer (FST) module
Fast Session Transfer (FST) is the transfer of a session from a channel
to another channel in a different frequency band. The term "session"
refers to non-physical layer state information kept by a pair of
stations (STAs) that communicate directly (i.e., excludes forwarding).

The FST is implemented in accordance with IEEE Std 802.11ad-2012.

Definitions

 * FST interface - an interface for which FST functionality is enabled
 * FST group - a bunch of FST interfaces representing single
		multi-band STA
 * FST peer - a multi-band capable STA connected
 * FST module - multi-band operation functionality implemented in
		accordance with IEEE Std 802.11ad-2012 (see 10.32
		Multi-band operation) as a part of hostapd/wpa_supplicant
 * FST manager - an external application that implements custom FST
		related logic, using the FST module's interfaces
		accessible via CLI or D-Bus

This commit introduces only the FST module. Integration of the FST
module into the hostapd/wpa_supplicant and corresponding CLI/D-Bus
interfaces and FST related tests are covered in separate commits.

FST manager application is out of scope of these commits.

As FST aggregates a few interfaces into FST group, the FST module uses
global CLI for both commands and notifications. It also exposes
alternative non-interface based D-Bus subtree for this purposes.

Configuration and Initialization

 * FST functionality can enabled by compilation flag (CONFIG_FST)
 * hostapd/wpa_supplicant controlling multiple interfaces are used for
   FST
 * once enabled by compilation, the FST can be enabled for specific
   interfaces in the configuration files
 * FST interfaces are aggregated in FST groups (fst_group_id config file
   entry), where each FST group:
   - represents one multi-band device
   - should have two or more FST interfaces in it
 * priority (fst_priority config file entry) must be configured for each
   FST interface. FST interface with higher priority is the interface FST
   will always try to switch to. Thus, for example, for the maximal
   throughput, it should be the fastest FST interface in the FST setup.
 * default Link Loss Timeout (LLT) value can be configured for each FST
   interface (fst_llt config file entry). It represents LLT to be used
   by FST when this interface is active.
 * FST interfaces advertise the Multi-band capability by including the
   Multi-band element in the corresponding frames

FST CLI commands:

 * fst list_groups - list FST groups configured.
 * fst list_ifaces - list FST interfaces which belong to specific group
 * fst iface_peers - list Multi-Band STAs connected to specific interface
 * fst list_sessions - list existing FST sessions
 * fst session_get - get FST session info
 * fst session_add - create FST session object
 * fst session_set - set FST session parameters (old_iface, new_iface,
                     peer_addr, llt)
 * fst session_initiate - initiate FST setup
 * fst session_respond - respond to FST setup establishemnt attempt by
                         counterpart
 * fst session_transfer - initiate FST switch
 * fst session_teardown - tear down FST Setup but leave the session object
			  for reuse
 * fst session_remove - remove FST session object

FST CLI notifications:
  * FST-EVENT-PEER - peer state changed (CONNECT/DISCONNECT)
  * FST-EVENT-SESSION - FST session level notification with following
                        sub-events:
     - EVENT_FST_SESSION_STATE - FST session state changed
     - EVENT_FST_ESTABLISHED - previously initiated FST session became
                               established
     - EVENT_FST_SETUP - new FST session object created due to FST session
                         negotiation attempt by counterpart

All the FST CLI commands and notifications are also implemented on D-Bus
for wpa_supplicant.

IEEE 802.11 standard compliance

FST module implements FST setup statemachine in compliance with IEEE
802.11ad (P802.11-REVmc/D3.3), as it described in 10.32 Multi-band
operation (see also Figure 10-34 - States of the FST setup protocol).

Thus, for example, the FST module initiates FST switch automatically
when FST setup becomes established with LLT=0 in accordance with
10.32.2.2 Transitioning between states.

At the moment, FST module only supports non-transparent STA-based FST
(see 10.32.1 General).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
290078a734 Add IEEE 802.11ad element descriptions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 12:33:29 +03:00
Jouni Malinen
05a90d78dc FT: Allow CCMP-256 and GCMP-256 as group ciphers
The FT-specific check for valid group cipher in wpa_ft_gen_req_ies() was
not up-to-date with the current list of supported ciphers. Fix this by
using a generic function to determine validity of the cipher. In
practice, this adds support for using CCMP-256 and GCMP-256 as the group
cipher with FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
359636170f hw_features: Merge similar return case in check_40mhz_2g4()
There is no need to have separate return statements for these corner
cases that are unlikely to be hit in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
6c7314917b AP: Increase maximum value accepted for cwmin/cwmax
The cwmin/cwmax parameters were limited more than is needed. Allow the
full range (0..15 for wmm_ac_??_{cwmin,cwmax} and 1..32767 for
tx_queue_data?_{cwmin,cwmax}) to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 23:34:49 +03:00
Jouni Malinen
575e4f5d49 SAE: Reject FFC commit-element with value p-1
The current P802.11 description of SAE uses "1 < element < p" as the
required range. However, this is not correct and does not match the
Dragonfly description of "1 < element < p-1". SAE definition will need
to change here. Update the implementation to reject p-1 based on the
correct rule here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 21:20:14 +03:00
Jouni Malinen
0c2b3f6541 SAE: Reject commit-scalar value 1
IEEE Std 802.11-2012 description of SAE does not require this, i.e., it
describes the requirement as 0 < scalar < r for processing the Commit
message. However, this is not correct and will be changes to 1 < scalar
< r to match the Dragonfly description so that a trivial secret case
will be avoided explicitly.

This is not much of an issue for the locally generated commit-scalar
since it would be very unlikely to get the value of 1. For Commit
message processing, a peer with knowledge of the password could
potentially force the exchange to expose key material without this
check.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 12:41:40 +03:00
Dmitry Shmidt
4f39908b60 Send CTRL-EVENT-NETWORK-NOT-FOUND if no suitable network was found
This provides more information to upper layer programs on what happens
with connection attempts in cases where the enabled networks are not
found in scan results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2015-06-27 11:08:08 +03:00
Jouni Malinen
bbb50086e3 SAE: Use random "password" in extra hunting-and-pecking loops
If PWE is discovered before the minimum number of loops (k) is reached,
the extra iterations use a random "password" to further obfuscate the
cost of discovering PWE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-26 22:41:51 +03:00
Jouni Malinen
eb5fee0bf5 SAE: Add side-channel protection to PWE derivation with ECC
This replaces the earlier IEEE Std 802.11-2012 algorithm with the design
from P802.11-REVmc/D4.0. Things brings in a blinding technique for
determining whether the pwd-seed results in a suitable PWE value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-26 22:41:51 +03:00
Jouni Malinen
4584b66eae SAE: Increase security parameter k to 40 based on Dragonfly recommendation
draft-irtf-cfrg-dragonfly recommends implementation to set the security
parameter, k, to a value of at least 40. This will make PWE generation
take significantly more resources, but makes it more likely to hide
timing differences due to different number of loops needed to find a
suitable PWE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:37 +03:00
Jouni Malinen
fdd731bd4a SAE: Fix PWE generation to use minimum loop count (k) properly
The implementation did not match the comment, i.e., only k-1 rounds were
required instead of k.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:37 +03:00
Jouni Malinen
8ec33326c1 SAE: Merge sae_derive_commit() error case return statements
These error cases have the exact same outcome, so a single return
statement can be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
d93abd4a97 SAE: Merge sae_get_rand() error case return statements
These error cases have the exact same outcome, so a single return
statement can be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
6a58444d27 SAE: Verify that own/peer commit-scalar and COMMIT-ELEMENT are different
This check explicitly for reflection attack and stops authentication
immediately if that is detected instead of continuing to the following
4-way handshake that would fail due to the attacker not knowing the key
from the SAE exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
5ed6519625 hw_features: Merge similar return cases
There is no need to have separate return statements for these corner
cases that are unlikely to be hit in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 11:24:52 +03:00
Jouni Malinen
4e37dd6c60 SAE: Simplify sae_prepare_commit() error path
There is no need to keep separate "return -1" statements for these error
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-22 00:38:02 +03:00
Jouni Malinen
efd5d26d33 Remove unnecessary wpa_ie_len check from wpa_parse_wpa_ie_wpa()
There is no need to have a separate "fail silently" case for wpa_ie_len
== 0. That condition does not seem to be reachable and even if it were,
the following "ie len too short" case will result in the exact same
return value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00