Commit graph

286 commits

Author SHA1 Message Date
Jouni Malinen
9425bb7828 tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Ilan Peer
a2168cf476 tests: Modify reset() to use the global control interface
Change the reset() method to use the global control interface
for resetting P2P state and also add a call to P2P_FLUSH.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:38:22 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
09f60224a5 tests: Remove all P2P networks in call to reset
When resetting a device, remove all the P2P networks to prevent
unexpected behavior in following tests. This is needed for the case
where P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:14:31 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00
Jouni Malinen
138bf11852 tests: INTERFACE_ADD/REMOVE with vif without creation/removal
This is also a regression test for INTERFACE_ADD parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-04 11:02:22 +03:00
Jouni Malinen
febf575200 tests: EAP-TTLS with TLS session ticket enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-01 12:57:11 +03:00
Jouni Malinen
53f4ed68ee tests: WPA2-PSK AP with passphrase only in memory
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-28 11:08:31 +02:00
Jouni Malinen
25f2cb618c tests: INTERFACE_ADD/REMOVE with vif addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-26 22:20:35 +02:00
Jouni Malinen
6d0b447464 tests: P2P_FIND with freq parameter to scan a single channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 22:06:24 +02:00
Jouni Malinen
7ebc7e8fa6 tests: wpa_supplicant DUMP/GET global parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
2265376271 tests: INTERWORKING_ADD_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
874057da4e tests: Make wpas_ctrl_many_networks more robust under valgrind
It is possible for a low powered CPU to take excessively long time to
delete 1000 network blocks when running under valgrind. This would have
resulted in the test case failing and the following reset operation
timing out which would then stop the test sequence completely.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
David Spinadel
bbcbbd3701 tests: Modify autogo_bridge test to use group interface
1. Add get_group_ifname() to wpasupplicant.py
2. Use the function to get the interface name for the bridge.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
fb9cf82eb3 tests: Add option to specify ifname to get_bss()
This is needed for cases that the group interface differs from the main
interface, i.e., when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
b0d697be91 tests: Use global control interface in wait_go_ending_session()
P2P_EVENT_GROUP_REMOVED is a global event, so use
wait_global_event() instead of wait_event().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 12:50:44 +02:00
Jouni Malinen
a1512a0cc7 tests: wpa_supplicant and station interface in a bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 17:28:08 +02:00
Jouni Malinen
d2432b8b7e tests: PMKSA cache size limit in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:26:46 +02:00
Jouni Malinen
1f53fe0310 tests: P2P group formation using PBC multiple times in a row
This verifies that PBC session overlap detection does not get indicated
when forming the group with the same peer multiple times.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 20:53:03 +02:00
Jouni Malinen
a66d2248a0 tests: Close wlan5 control interface monitor more explicitly
There were couple of common cases where the control interface for the
dynamic wpa_supplicant instance could have been left in attached state
until Python ends up cleaning up the instance. This could result in
issues if many monitor interface events were queued for that attached
socket. Make this less likely to cause issues by explicitly detaching
and closing control interfaces before moving to the next test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 17:13:55 +02:00
Jouni Malinen
061cbb258f tests: domain_match checking against server certificate
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
c2096d9981 tests: bssid_blacklist and bssid_whitelist
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Eliad Peller
bc32f830f4 tests: wmm_ac_status and roaming case with WMM-AC
Make sure the wmm_ac_status command reflects correctly the existing
tspecs after add_ts/del_ts commands. Add a new test to verify all tspecs
are removed on roaming (while FT is not used).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-01-04 18:57:23 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
c8836a4f03 tests: Allow dump_monitor() to be used without global monitor interface
It is possible for WpaSupplicant instance to be used without the global
control socket, so allow dump_monitor() to handle this case cleanly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:01:41 +02:00
Jouni Malinen
970a23f665 tests: Make flush_scan_cache() more robust
It was possible for BSS entries on the scanned channel (2412 MHz) to be
left behind after flush_scan_cache() call. Use a less likely channel
2417 MHz as the default channel to scan. This will hopefully get rid of
most problematic BSS entries from previous test cases. For example,
ap_hs20_oen followed by ap_hs20_random_mac could fail due to
INTERWORKING_CONNECT seeing non-RSN scan result from the previous test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:13:03 +02:00
Jouni Malinen
909f13cc52 tests: Move 'SET pmf 0' from reset() to test cases
This avoids one more cleanup step between most test cases by clearing
the default PMF behavior change only in case it was actually modified
during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
be9f156200 tests: Move WPS_ER_STOP from reset() to test cases
This avoids one more cleanup step between most test cases by stopping ER
only in case it was actually used during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
25057d9227 tests: P2P cross connection
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
7457c63538 tests: Additional P2P_FIND parameter coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 17:56:47 +02:00
Jouni Malinen
ceb767d501 tests: More coverage for WMM-AC
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 14:08:24 +02:00
Jouni Malinen
acc9a635c8 tests: EAP Re-authentication Protocol (ERP)
This tests RP EAP-Initiate/Re-auth-Start transmission, ERP key
derivation, and EAP-Initiate/Re-auth + EAP-Finish/Re-auth exchange and
rMSK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-04 12:16:29 +02:00
Jouni Malinen
243dcc4ae4 tests: Add a helper function for clearing scan cache
This makes it more convenient and consistent to clear the cached scan
results from cfg80211 and wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 12:20:53 +02:00
Jouni Malinen
ee3f9f3837 tests: Optimize autogo test cases by removing unnecessary scans
Keep full channel scans in autogo for test coverage, but use single
channel scan in all other autogo* test cases to remove unnecessary
waiting that does not add any test coverage. This removes more than one
minute from the total test execution time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
e4d7b5134e tests: Move hessid and access_network_type reset to test case
This removes unnecessary reset() steps from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
47dcb1186f tests: Move external_sim reset to test cases that change this
This removes unnecessary reset() step from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Johannes Berg
6bb9d861f9 tests: Ignore status responses without =
There are valid status (and possibly status-driver) responses
that don't have a name=value format, ignore those in the test
framework parser.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27 20:15:51 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00
Jouni Malinen
168d4b097c tests: WEP with non-zero key index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:37:54 +02:00
Eliad Peller
7613345814 tests: Add wpa_supplicant WMM-AC test
Add basic wpa_supplicant tests for WMM-AC TSPEC addition/deletion.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 21:40:57 +02:00
Jouni Malinen
eec0cc8da2 tests: Clear ignore_old_scan_res setting
This parameter was used in some of the NFC test cases to make scanning
more robust in case of changing AP configuration. However, the parameter
was not cleared anywhere, so it could have been left in use for other
test cases as well. To get more consistent behavior, clear the value
back to its default between test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-15 12:56:02 +02:00
Jouni Malinen
5f797376f2 tests: Make RELOG command use global control interface
This allows RELOG to be used even if a wpa_supplicant process does not
have any interfaces configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
89f20842f6 tests: OpenSSL cipherlist configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:59:04 +03:00
Jouni Malinen
b43ac5d5ab tests: P2P group formation with WSC_Done missing
This verifies that GO is able to complete group formation even if the
P2P Client does not send WSC_Done message (or that message is dropped
for any reason) in case the P2P Client completes 4-way handshake
successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
816e3df972 tests: Random MAC address use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:55 +03:00
Jouni Malinen
bbf20ca265 tests: Use TYPE=ONLY scan for scan_for_bss
This avoids unexpected connection attempts in cases a matching network
is enabled and there is no existing connection (e.g., when testing with
ENABLE_NETWORK no-connect option).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
f1a36a53a5 tests: update_identifier in network block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 15:51:20 +03:00
Haim Dreyfuss
5fe7a42601 tests: Add wpasupplicant get_mcc helper function
The function returns the number of concurrent channels supported by the
driver.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:49:17 +03:00
Jouni Malinen
54c20c9b43 tests: Make discovery_group_client more robust
Allow three P2P_FIND attempts for discovering the GO on a non-social
channels since the single Probe Response frame can be missed easily
under heavy CPU load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
655bc8bfd6 tests: Make FT test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP. In addition, check for ROAM/FT_DS failures to be
able to report errors more clearly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
841bed04de tests: Make HS 2.0 test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
c126cb4d1c tests: Make pmksa_cache_on_roam_back more robust
The single channel scan while associated to another AP and immediately
after starting the second AP can miss the Probe Response frame
especially under heavy CPU load. Avoid false error reports by allowing
multiple scan rounds to be performed. wpas_ctrl_bssid_filter is also
modified to take into account different get_bss() behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:45 +03:00
Jouni Malinen
521b7e7925 tests: Verify global control interface before starting each test
This allows control interface issues to be caught in a bit more readable
way in the debug logs. In addition, dump pending monitor socket
information more frequently and within each test case in the log files
to make the output clearer and less likely to go over the socket buffer
limit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 15:20:23 +03:00
Jouni Malinen
26cf800d11 tests: id_str in network configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
117caa4a0c tests: wpa_supplicant configuration file reading/writing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-16 01:45:13 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
5070b14a51 tests: p2p_find with progressive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
543f9f7ead tests: auto_interworking=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b3ec107c8b tests: BSS_EXPIRE_COUNT/AGE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
31ec9faf47 tests: bgscan test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
f44c45ac7f tests: Verify STATUS-WPS passphrase on GO
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
861671b6ca tests: Use random WPS PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
538da4f4d2 tests: TDLS setup failure due to BSSID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
ca4fd18290 tests: Speed up IBSS test using single channel scan on SELECT_NETWORK
This removes unnecessary waits and adds test coverage for SELECT_NETWORK
freq parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-04 23:13:49 +03:00
Jouni Malinen
aa45859eba tests: Extend wpas_ctrl_cred to cover most cred block operations
This verifies the new cred modification events and GET_CRED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-04 22:50:46 +03:00
Jouni Malinen
145f35bf30 tests: Verify HT/VHT required rejection
Previously, only the case of STA supporting HT/VHT was tested. Now both
cases are verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:49:12 +02:00
Jouni Malinen
3b80894541 tests: Negative FT RRB test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:28:53 +02:00
Jouni Malinen
44bb91066b tests: wpa_supplicant MIB command
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:18:03 +02:00
Jouni Malinen
fb5c8cea95 tests: Supplicant-enforced PTK rekey
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:13:23 +02:00
Jouni Malinen
daf3806d1d tests: Protocol tests for unexpected/invalid GO Neg Resp
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
08e4bd8751 tests: PD-before-GO-Neg workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-05 12:00:20 +02:00
Jouni Malinen
e2afdef223 tests: Verify excluded_ssid with all credential types
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
9714fbcdcc tests: HS 2.0 minimum bandwidth policy
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
a96066a5d3 tests: Verify cred vs. network block priority selection
This verifies that 'INTERWORKING_SELECT auto' is able to pick the
correct network based on priority configuration when connected to a
lower priority network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 14:17:31 +02:00
Jouni Malinen
1815317906 tests: Verify req_conn_capab as cred parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 00:49:52 +02:00
Jouni Malinen
5f1e31cfc8 tests: Add update_identifier to one of the HS 2.0 test cases
This allows debug logs to be used to verify byte order in the
PPS MO ID fields.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
19839f8efc tests: HS 2.0 maximum BSS Load constraint
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
2253ea44c2 tests: HS 2.0 roaming partner preference
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
078683ac2b tests: Verify multi-cred sp_priority use
test_ap_hs20_multi_cred_sp_prio verifies that two credentials
provisioned by a single SP are selected properly based on sp_priority
when a single BSS matches both credentials.
test_ap_hs20_multi_cred_sp_prio2 does the same when there a separate BSS
for each credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
d369bdcad9 tests: Clear pmf parameter on reset()
This is in preparation of removing pmf parameter reset on the FLUSH
command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-26 01:24:22 +02:00
Jouni Malinen
12c587a517 tests: Verify domain_suffix_match in a cred block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 23:40:29 +02:00
Jouni Malinen
b2210bd289 tests: Stop WPS ER on station reset
This seems to be needed in some cases to avoid issues in test cases that
assume there are no other ERs running.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-24 13:56:42 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
6f939e591e tests: Convert connect() to use kwargs
This makes it more convenient to add new network block parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:09 +02:00
Jouni Malinen
242219c563 tests: Set dh_file on EAP client
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:42:56 +02:00
Jouni Malinen
e01929c668 tests: Report unexpected STATUS lines instead of stopping
It looks like get_status() has failed in some test runs because of a
STATUS command returning an line without '=' on it. Instead of stopping
there on exception, report the unexpected line in the log and ignore it
to allow test to continue.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
ca5b81a5bb tests: wpa_supplicant ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
e1a5e09ab7 tests: AP mode operations with wpa_supplicant
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
da10266224 tests: WEP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
c9dc56231b tests: Add test cases for P2P+NFC
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
b21df6e779 tests: Run dump_monitor() again if scan was pending
In addition to running the FLUSH command again, the pending monitor
interface events need be cleared in case the driver was running a scan
when reset() is called. This avoids issues, e.g., with discovery_dev_id
failing due to an unexpected P2P-DEVICE-FOUND event that was generated
by the pending scan operation that had not yet complete when the first
dump_monitor() call in reset() happened.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-15 00:09:56 +02:00
Jouni Malinen
7559ad7af6 tests: Double the connection timeout for EAP cases
It looks like slow virtual machines may have issues to complete some EAP
authentication cases (e.g., EAP-EKE in ap_ft_eap) within the 10 second
timeout under load. Double the timeout to avoid incorrect test failures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:47:01 +02:00
Jouni Malinen
c57c1ed6b3 tests: Clear data from ongoing scan on reset()
It was possible for the previous test case to leave unexpected BSS or
P2P peer table entries if a scan was in progress when the FLUSH command
was used. This could result in test failures, e.g., when running
discovery_dev_type_go followed by discovery_group_client where a P2P
peer was discovered on another channel at the end of the former test
case from a scan that was running durign the FLUSH operation that was
supposed to remove all P2P peers. This could result in
discovery_group_client failing due to dev[2] trying to send the
discoverability frame on incorrect channel (the one learned in the
previous test case) since discover_peer() skipped a new device
discovery. Fix this by running FLUSH operation again if a pending scan
operation is detected during the first FLUSH operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:26:22 +02:00
Jouni Malinen
c70ebce0ba tests: P2P device discovery filtering on Device ID and Device Type
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:25:58 +02:00
Jouni Malinen
d4c7a2b9e6 tests: EAP-TLS with OCSP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:45:56 +02:00
Jouni Malinen
2d10eb0efd tests: PKCS#12 use for EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:18:22 +02:00
Jouni Malinen
3b74982f93 tests: subject_match and altsubject_match
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:04:35 +02:00
Jouni Malinen
53a6f06a0b tests: EAP-FAST
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 16:42:15 +02:00
Jouni Malinen
33de4f2d7a tests: External password storage
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 22:32:12 +02:00
Jouni Malinen
f19ee5b7f7 tests: Hidden SSID
In addition, add the earlier tests in the new test_ssid.py file that was
forgotten from the previous commit
d78f33030d.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 20:23:56 +02:00
Jouni Malinen
d0ce105068 tests: Verify EAP-PEAP/EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
6daf5b9c1c tests: Add more EAP fragmentation tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
d4b21766e5 tests: Force p2p_find in p2p_service_discovery_fragmentation
It was possible for this test case to fail if P2P_FLUSH was issued
during a search scan and that scan adding back the peer. Avoid this by
forcing p2p_find to be started regardless of the current P2P peer table
contents for each round of service discovery.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
710f96fd8c tests: Remove unnecessary reset() steps
The FLUSH command clears disallow_aps, p2p_disabled, and
p2p_per_sta_psk, so there is no need to clear them separately.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
36408936f8 tests: Optimize wait_event()
Replace the fixed 100 ms waits with a select()-based wait and timeout
for full wait based on monotonic time to optimize wait_event().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d7a99700de tests: Clean up and optimize gas_concurrent_scan and _connect
No need to run a full scan as the first step since it only needs to find
the AP from a known channel for the GAS operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:06 +02:00
Jouni Malinen
ad36d27d6a tests: Remove ignore_old_scan_res workaround
Now that wpa_supplicant requests the driver (cfg80211) to clear its scan
cache automatically after each BSS_FLUSH/FLUSH command, the previously
used ignore_old_scan_res workaround should not be needed for the hwsim
test cases anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:59:59 +02:00
Jouni Malinen
d78f33030d tests: SSID contents and encoding
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
20e5c2830f tests: Add IEEE 802.1X and dynamic WEP test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
6e917c3e25 tests: Increase nl80211 test coverage with monitor/connect
Add test cases to use connect command instead of auth+assoc commands and
AP mode operations using the old monitor interface design.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
9489637b42 tests: Verify dynamic wpa_supplicant interface addition/removal
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
0fab9ce67a tests: Verify PMKSA caching
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 19:25:42 +02:00
Jouni Malinen
a6cf5cd655 tests: Verify SAE anti-clogging mechanism
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
6645ff5094 tests: Verify WPS AP Setup Locking on AP PIN failures
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
b553eab1a9 tests: Verify FT-over-DS
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
4a5a5792f1 tests: Verify PeerKey handshake
NOTE: Actual use of the direct link (DLS) is not supported in
mac80211_hwsim, so this operation fails at setting the keys after
successfully completed 4-way handshake. This test case does allow the
key negotiation part to be tested for coverage, though.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-28 16:32:54 +02:00
Jouni Malinen
cf9189b94c tests: Verify scan behavior
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 20:50:23 +02:00
Jouni Malinen
dcd6816817 tests: Verify Interworking network selection with other EAP types
This adds number of test cases to go through various possible EAP
configurations for Interworking network selection.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
e209eb989c tests: Verify Interworking network selection based on roaming consortium
In addition, use PEAP as the EAP method to increase testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
459e96cd3b tests: Interworking network select with simulated SIM/USIM
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
2cdd91d8b1 tests: Verify sharing and unsharing of ANQP results
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
0589f40146 tests: Use a single channel scan to avoid unnecessary full scans
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
715bf904ff tests: Verify Interworking Probe Request filtering
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
0eff1ab3cb tests: Add test cases for various ciphers
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 11:17:32 +02:00
Jouni Malinen
41af1305d7 tests: Add test cases for concurrent P2P operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
19ae1d0788 tests: Verify P2P operations with a separate group interface
This extends P2P test coverage to include the case of separate group
interface use with autonomous GO and group formation through GO
negotiation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 15:32:52 +02:00
Jouni Malinen
b4264f8f67 tests: Verify disallow_aps with Interworking
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
6a0b400273 tests: Verify no-duplicate-networks with Interworking connection
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
d355372ce4 tests: HS 2.0 excluded SSID
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:33 +02:00
Jouni Malinen
d1ba402fe5 tests: HS 2.0 required roaming consortium
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:28 +02:00
Jouni Malinen
2232edf8e2 tests: Use dictionary as add_cred_values() parameter
This makes it more convenient to use this function for cases that modify
credential parameters.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 13:12:34 +02:00
Jouni Malinen
e114c49cfc tests: Add an EAP-TLS test case
This fixes the user.key file (incorrect key was copied previously) and
adds a test case for EAP-TLS with WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
22b99086ce tests: Add more EAP test cases
This increases EAP method coverage for WPA2-Enterprise to include
EAP-pwd, EAP-GPSK, EAP-SAKE, EAP-EKE, EAP-IKEv2, EAP-PAX, and EAP-PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
57661377df tests: Use a helper function to rename wpa_supplicant/hostapd logs
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 13:04:06 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
709f18d501 tests: Add a test for dynamic hostapd config change
test_ap_change_ssid verifies that the SET and RELOAD control interface
commands can be used to change the SSID of a hostapd-controlled WPA2-PSK
AP, i.e., for a case where the PSK needs to be derived again after the
SSID change.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 17:17:04 +02:00
Jouni Malinen
bbe867672e tests: Add helper functions for Hotspot 2.0 test cases
These make it easier to add new test cases for Interworking network
selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 14:20:29 +02:00
Jouni Malinen
46f2cfcefc tests: Add P2P channel selection test cases for group formation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 23:49:10 +03:00
Jouni Malinen
72c052d525 tests: Add domain_suffix_match validation
This verifies that domain_suffix_match works correctly both for the
matching and mismatching cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00