Commit graph

2541 commits

Author SHA1 Message Date
Jouni Malinen
b3a6d9d400 wlantest: Add send command for injecting raw frames
This can be used by external programs (e.g., wlantest_cli) to inject
raw frames (hex dump of the frame header and body). The data can be
requested to be sent as-is or protected with the current key.
2010-12-16 16:11:54 +02:00
Jouni Malinen
b993e77b5b Removed unused variable from non-Linux builds 2010-12-14 17:10:39 +02:00
Jouni Malinen
aca0160548 nl80211: Set cipher suites when using user space SME
Previously, pairwise and group cipher suites were configured only
when kernel SME (nl80211 connect API) was used. However, mac80211
needs this information even in the user space SME case for one
thing: to disable HT when TKIP/WEP is used. Add
NL80211_ATTR_CIPHER_SUITES_PAIRWISE to fix this special case with
user space SME. This allows mac80211 to disable HT properly when
the AP is configured with configuration that is not allowed.
2010-12-13 21:08:53 +02:00
Jouni Malinen
b39f58347d wlantest: Add support for decrypting TDLS frames
Derive TPK based on TDLS TPK Handshake and decrypt frames on the
direct link with TPK-TK.
2010-12-13 11:20:55 +02:00
Jouni Malinen
89c38e32c7 RSN IBSS: RX GTK configuration with nl80211
This add preliminary code for setting the per-STA RX GTK for
RSN IBSS when nl80211 drivers. For some reason, this does not
seem to fully work, but at least driver_nl80211.c is now aware of
what kind of key is being set and the whatever is missing from
making this key configuration go through should be specific to
nl80211/cfg80211.
2010-12-04 20:31:22 -08:00
Jouni Malinen
18d2ba083b nl80211: Generate EVENT_IBSS_RSN_START events
This is needed to trigger start of 4-way handshake when a new STA is
detected in an RSN IBSS.
2010-12-04 18:17:58 -08:00
Jouni Malinen
df4bc5091e IBSS RSN: Do not start 4-way handshake unless RSN is enabled 2010-12-04 18:17:05 -08:00
Jouni Malinen
1df492df34 Do not send Deauth/Disassoc to unknown STA if SA is invalid
The frame needs to be sent from an individual (non-group) address,
so drop invalid frames before sending Deauth/Disassoc frames to
not associated STAs.
2010-12-04 17:40:36 -08:00
Paul Stewart
8e5f078fb9 dbus_new_handlers: Omit errant dbus_message_unref
This unref is guaranteed to be freeing a NULL pointer.

Tested manually: use dbus-send to send an invalid debug level parameter

Before change:

$ dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply
/fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set
string:fi.w1.wpa_supplicant1 string:DebugLevel variant:string:msgdumpf
Error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply
(timeout by message bus)
(and then wpa_supplicant crashes)

After change:

$ dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply
/fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set
string:fi.w1.wpa_supplicant1 string:DebugLevel variant:string:msgdumpf
Error fi.w1.wpa_supplicant1.InvalidArgs: Did not receive correct message
arguments.

Signed-off-by: Paul Stewart <pstew@google.com>
2010-12-04 11:58:44 -08:00
Jouni Malinen
c4d7fc90a2 Fix EAP-FAST PAC file writer to avoid crash with multiple PACs
One of the pointers to the PAC buffer was not updated after realloc
and if the realloc ended up returning new pointer, the *pos pointer
was still pointing at the old location (i.e., freed memory at
this point).
2010-12-04 11:37:41 -08:00
Jouni Malinen
0f3e4f2a83 wlantest: Add support for reading DLT_IEEE802_11 pcap files 2010-12-04 11:18:21 -08:00
Jouni Malinen
350132bec5 wlantest: Add support for reading pcap files with prism header 2010-12-02 12:56:37 -08:00
Jouni Malinen
482856c8ba nl80211: Fix compiler warnings on non-P2P build 2010-11-27 13:05:37 +02:00
Ben Greear
6859f1cb24 Enable sharing of scan result events among virtual interfaces
When controlling multiple virtual interfaces on the same physical
radio, share the scan results events with sibling interfaces. This
decreases the time it takes to connect many virtual interfaces.

This is currently only supported on Linux with cfg80211-based
drivers when using nl80211 or wext driver interface.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2010-11-26 21:46:30 +02:00
Ben Greear
c577db2afd Add interface name to some debug prints
This makes it easier to figure out what is happening when controlling
multiple interfaces from a single wpa_supplicant process.
2010-11-26 21:16:36 +02:00
Tomasz Bursztyka
1b232e479d dbus: Fix new dbus API for WPS
Start() method's optional Bssid argument needs a byte array, not an
array of arrays.
2010-11-26 19:47:24 +02:00
Jouni Malinen
f2ed8023c4 nl80211: Track used interfaces and support multiple P2P groups
Track all the P2P group interfaces within driver_nl80211.c to make
it easier to generate unique P2P Interface Addresses.
2010-11-26 18:14:51 +02:00
Jouni Malinen
871f4dd069 Allow driver wrappers to indicate whether result codes are sane
Some drivers are not providing exactly reliable error codes (e.g.,
with WEXT), but others may actually indicate reliable information.
Allow driver wrappers to indicate if that is the case and use
optimizations if so. For now, this improves nl80211 with
NL80211_CMD_CONNECT for a case where connection request fails.
2010-11-26 17:41:21 +02:00
Jouni Malinen
df89c1c8d1 nl80211: Add BSSID to NL80211_CMD_CONNECT assoc reject event 2010-11-26 17:40:10 +02:00
Jouni Malinen
ce04af5a74 nl80211: Fix NL80211_CMD_CONNECT with WPA/WPS networks 2010-11-26 17:39:31 +02:00
Jouni Malinen
c05d6d188c Do not segfault on EVENT_ASSOC_REJECT without BSSID 2010-11-26 17:38:46 +02:00
Jouni Malinen
e5ad96b745 SME: Optimize recovery from assocication command failures
mac80211 can indicate this mainly because of channel selection
conflicts with other vifs. If there is another BSS on another
channel, we should try to connect to it instead.
2010-11-26 17:37:22 +02:00
Jouni Malinen
c55f774d00 nl80211: Add preliminary code for testing separate P2P group interface
driver_param=use_p2p_group_interface=1 can now be used to test
nl80211-drivers with separate P2P group interface. In other words,
the main interface (e.g., wlan0) is reserved for P2P management
operations and non-P2P connections and a new group interface (e.g.,
p2p-wlan0-0) is created for the P2P group.

This implementation is very minimal, i.e., it only support address
allocation for a single P2P group interface (if the driver does not
handle this internally). In addition, not all functionality has yet
been tested, so for now, this is disabled by default and needs that
special driver_param to enable.
2010-11-26 15:54:53 +02:00
Jouni Malinen
971e357f19 P2P: Add new driver option for interface allocation
WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P flag can now be used to
indicate that the initial interface (e.g., wlan0) is used for
P2P management operations and potentially non-P2P connections.
This is otherwise identical to
WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE, but the possibility of
non-P2P connections makes some operations differ.
2010-11-26 15:52:16 +02:00
Jouni Malinen
a1eca5cfd8 P2P: Rename the group interface name to use p2p- prefix
This may make it less likely for udev to rename the interface that
would previously have been called wlan0-p2p-# (now: p2p-wlan0-#).
In addition, add some workaround code to handle the case where the
main interface name is close to the IFNAMSIZ length limit to
avoid going over that for the P2P group interface.
2010-11-26 15:50:22 +02:00
Jouni Malinen
0f85ef5cf0 P2P: Use larger pending_interface_name buffer
In theory, the interface name could be longer than IFNAMSIZ in
some systems, so use the same size buffer for this field as is
used with the main interface name.
2010-11-26 15:49:26 +02:00
Jouni Malinen
afa4926c95 P2P: Use alternative way of starting dnsmasq if needed
Some other dnsmasq users (like libvirt) seem to be binding the DHCP
server to all interfaces which prevents the previously used mechanism
here from working (bind on the DHCP socket fails). If a failure is
noticed, try to start dnsmasq with -z option to avoid that.
2010-11-26 15:47:13 +02:00
Jouni Malinen
0fb337c121 Extend load balancing optimization in BSS blacklisting
Move the previously SME specific optimization code into generic
function that can be used from non-SME code, too, and use it to
handle disconnection events. In other words, allow disconnection
event to trigger similar optimized scanning case to handle a
common load balancing mechanism. If there is another BSS in the
same ESS when we receive a disconnection event, scan only the
known frequencies of such other BSSes on the next attempt to
speed up recovery.
2010-11-26 11:36:03 +02:00
Jouni Malinen
5471c3434e Blacklist BSS on first failure if only a single network is enabled
The special case of requiring blacklisting count to be 2 or higher
is only needed when more than a single network is currently enabled.
As such, we should not do that when only a single network is enabled.
This make the station more likely to follow network side load
balancing attempts where the current AP may disassociate us with
an assumption that we would move to another AP.
2010-11-26 11:23:50 +02:00
Jouni Malinen
34dbfc0cb3 Fix CONFIG_AP=y build without NEED_AP_MLME driver 2010-11-25 23:41:32 +02:00
Jouni Malinen
0fe620de7e Fix CONFIG_AP=y build without CONFIG_WPS=y 2010-11-25 23:34:56 +02:00
Jouni Malinen
805253d820 random: Fix a compiler warning about unused variable
In CONFIG_NO_STDOUT_DEBUG=y case, the error variable was not used.
2010-11-25 23:32:17 +02:00
Jouni Malinen
f47d639d49 SME: Optimize recovery from common load balancing mechanisms
When authentication or association fails when trying to connect to
a BSS in an ESS that has multiple BSSes based on previous scans,
limit the first recovery scan to only the known channels that has
been seen previously. This speeds up recovery in some of the most
commonly used load balancing mechanisms in enterprise WLAN
networks.
2010-11-25 22:51:56 +02:00
Jouni Malinen
7e6646c794 SME: Fix re-try after auth/assoc timeout/failure
There were various issues in how the SME (i.e., nl80211-based driver
interface) handled various authentication and association timeouts and
failures. Authentication failure was not handled at all (wpa_supplicant
just stopped trying to connect completely), authentication timeout
resulted in blacklisting not working in the expected way (i.e., the same
BSS could be selected continuously), and association cases had similar
problems.

Use a common function to handle all these cases and fix the blacklist
operation. Use smaller delay before trying to scan again during the
initial cycle through the available APs to speed up connection. Add
a special case for another-BSS-in-the-same-ESS being present to
speed up recovery from networks with multiple APs doing load balancing
in various odd ways that are deployed out there.
2010-11-25 22:00:04 +02:00
Jouni Malinen
3c85f144ce P2P: Fix Action frame sending after disconnection
assoc_freq needs to be cleared when an interface gets disconnected.
This fixes an issue where P2P Action frame transmission may fail
because of missing remain-on-channel operation when using the same
interface for group operations (or non-P2P connections) and P2P
management operations.
2010-11-25 16:04:07 +02:00
Sudhakar Swaminathan
9d562b7946 P2P: Add p2p_unauthorize command
This can be used to remove authorization from a previous p2p_connect
commands that has not yet resulted in completed GO Negotiation.
2010-11-25 13:09:50 +02:00
Jouni Malinen
7392f11e96 Convert most commonly used drv ops to real function calls
Getting rid of these inline functions seems to reduce the code size
quite a bit, so convert the most commonly used hostapd driver ops to
function calls.
2010-11-24 17:01:21 +02:00
Jouni Malinen
7a80af658d Fix CONFIG_AP=y build without CONFIG_P2P=y 2010-11-24 16:55:17 +02:00
Jouni Malinen
fe99fb74f1 Fix wpa_supplicant AP mode build after hostapd changes 2010-11-24 16:52:04 +02:00
Jouni Malinen
0e8a96a911 Get rid of struct hostapd_driver_ops abstraction
This is not needed anymore and just makes things more difficult
to understand, so move the remaining function pointers to direct
function calls and get rid of the struct hostapd_driver_ops.
2010-11-24 16:50:06 +02:00
Jouni Malinen
3acdf771b8 hostapd_driver_ops reduction
send_eapol, set_key, read_sta_data, sta_clear_stats,
set_radius_acl_auth, set_radius_acl_expire, and set_beacon
to use inline functions instead of extra abstraction.
2010-11-24 16:34:49 +02:00
Jouni Malinen
51e2a27a21 hostapd_driver_ops reduction
set_sta_vlan, get_inact_sec, sta_deauth, sta_disassoc, and sta_remove
to use inline functions instead of extra abstraction.
2010-11-24 15:36:02 +02:00
Jouni Malinen
b5b1b18f39 hostapd_driver_ops reduction: set_countermeasures 2010-11-24 15:26:44 +02:00
Jouni Malinen
cee7d66b1d hostapd: Start removing struct hostapd_driver_ops abstraction
Commit bf65bc638f started the path to
add this new abstraction for driver operations in AP mode to allow
wpa_supplicant to control AP mode operations. At that point, the
extra abstraction was needed, but it is not needed anymore since
hostapd and wpa_supplicant share the same struct wpa_driver_ops.

Start removing the unneeded abstraction by converting
send_mgmt_frame() to an inline function, hostapd_drv_send_mlme().
This is similar to the design that is used in wpa_supplicant and
that was used in hostapd in the past (hostapd_send_mgmt_frame()
inline function).
2010-11-24 15:19:50 +02:00
Jouni Malinen
719007f5c0 l2_packet: Use wpa_printf() instead of perror() 2010-11-24 15:00:22 +02:00
Jouni Malinen
ebbec8b2fa nl80211: Fix send commands to return 0 on success
driver.h defines these functions to return 0 on success, not
number of bytes transmitted. Most callers are checking "< 0" for
error condition, but not all. Address this by following the driver
API specification on 0 meaning success.
2010-11-24 14:58:58 +02:00
Albert Liu
1d39378a0b P2P: Fix RX ack status on Action frames sent via interface in GO mode
The wpa_supplicant_event() EVENT_TX_STATUS ack field needs to be
converted to use wpas_send_action_tx_status()
enum p2p_send_action_result in this case, too, to avoid getting
incorrect TX status for P2P processing.
2010-11-24 14:25:33 +02:00
Jouni Malinen
08704cd885 hostapd: Verify availability of random data when using WPA/WPA2
On Linux, verify that the kernel entropy pool is capable of providing
strong random data before allowing WPA/WPA2 connection to be
established. If 20 bytes of data cannot be read from /dev/random,
force first two 4-way handshakes to fail while collecting entropy
into the internal pool in hostapd. After that, give up on /dev/random
and allow the AP to function based on the combination of /dev/urandom
and whatever data has been collected into the internal entropy pool.
2010-11-24 13:08:03 +02:00
Masashi Honma
dbb6ed7e75 Fix memory leak on EAPOL Authenticator error path
wlan0: RADIUS No authentication server configured
MEMLEAK[0x999feb8]: len 1040
WPA_TRACE: memleak - START
[3]: ./hostapd(radius_msg_new+0x33) [0x8074f43]
     radius_msg_new() ../src/radius/radius.c:117
[4]: ./hostapd() [0x806095e]
     ieee802_1x_encapsulate_radius() ../src/ap/ieee802_1x.c:439
     ieee802_1x_aaa_send() ../src/ap/ieee802_1x.c:1496

For example, this error occured when I used WPS hostapd without
"eap_server=1" definition in configuration file.
2010-11-24 01:42:50 +02:00
Jouni Malinen
bbb921daaa Maintain internal entropy pool for augmenting random number generation
By default, make hostapd and wpa_supplicant maintain an internal
entropy pool that is fed with following information:

hostapd:
- Probe Request frames (timing, RSSI)
- Association events (timing)
- SNonce from Supplicants

wpa_supplicant:
- Scan results (timing, signal/noise)
- Association events (timing)

The internal pool is used to augment the random numbers generated
with the OS mechanism (os_get_random()). While the internal
implementation is not expected to be very strong due to limited
amount of generic (non-platform specific) information to feed the
pool, this may strengthen key derivation on some devices that are
not configured to provide strong random numbers through
os_get_random() (e.g., /dev/urandom on Linux/BSD).

This new mechanism is not supposed to replace proper OS provided
random number generation mechanism. The OS mechanism needs to be
initialized properly (e.g., hw random number generator,
maintaining entropy pool over reboots, etc.) for any of the
security assumptions to hold.

If the os_get_random() is known to provide strong ramdom data (e.g., on
Linux/BSD, the board in question is known to have reliable source of
random data from /dev/urandom), the internal hostapd random pool can be
disabled. This will save some in binary size and CPU use. However, this
should only be considered for builds that are known to be used on
devices that meet the requirements described above. The internal pool
is disabled by adding CONFIG_NO_RANDOM_POOL=y to the .config file.
2010-11-24 01:29:40 +02:00