Commit graph

14583 commits

Author SHA1 Message Date
Jouni Malinen
8a576f5ea5 FT: Maintain PMK-R1 for a connected STA
This is needed to allow PTK rekeying to be performed through 4-way
handshake in an association started through FT protocol.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:30 +03:00
Jouni Malinen
09ab81b9e8 WPA: Clear authenticator keys for a STA on deinit/disconnection
Do not leave keys in heap memory after they are no longer needed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:30 +03:00
Jouni Malinen
f006c13c14 WPA: Stop WPA statement on STA disassociation
This is needed to avoid leaving some timers (e.g., for PTK rekeying)
running afrer a STA has disassociated.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:29 +03:00
Jouni Malinen
d178ab0d57 FT: Start PTK rekey timer on FT protocol completion
This is needed to trigger PTK rekeying properly for associations started
with FT protocol.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:29 +03:00
Jouni Malinen
267c366f38 FT: Remove unused pmk argument from wpa_auth_derive_ptk_ft()
FT rules for PTK derivation do not use PMK. Remove the unused argument
to the PTK derivation function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:05:47 +03:00
Jouni Malinen
0a1a82db92 FT: Allow 4-way handshake for PTK rekeying to continue without PMK/PMKID
There is no PMK/PMKID when going through 4-way handshake during an
association started with FT protocol, so need to allow the operation to
proceed even if there is no selected PMKSA cache entry in place.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:05:41 +03:00
Jouni Malinen
6480e5a9a0 tests: PMKSA caching and PTK rekey triggered by AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
4731296759 tests: FILS and PTK rekeying
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
a40bd06e9b FILS: Fix PTK rekeying
The PMK and PMKID information from FILS ERP and FILS PMKSA caching needs
to be stored within struct wpa_state_machine for PTK to work. Without
this, PTK derivation would fail and attempt to go through rekeying would
result in disconnection. Furthermore, wpa_rekey_ptk() timer needs to be
started at the completion of FILS association since the place where it
was done for non-FILS cases at the end of 4-way handshake is not reached
when FILS authentication is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
c8931afe24 nl80211: Check nla_put_flag() failure for ext auth
All nla_put*() operations should be verified to succeed, so check this
recently added one for NL80211_ATTR_EXTERNAL_AUTH_SUPPORT.

Fixes: 236e793e7b ("nl80211: External authentication in driver-based AP SME mode")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
9f721917e7 tests: EAP-pwd protocol testing for the server
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 14:15:42 +03:00
Jouni Malinen
6151c9b900 EAP-pwd server: Remove unused srandom() call
Commit 4b16c15bbc ("EAP-pwd server: Use os_get_random() for
unpredictable token") replaced use of os_random(), i.e., of random(),
with os_get_random(), but forgot to remove the now unused srandom()
call. Clean up the implementation and remove that unneeded code.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
778ce8ae0b tests: EAP-pwd protocol tests - unexpected more-fragment frame
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
d2d1a324ce EAP-pwd peer: Fix reassembly buffer handling
Unexpected fragment might result in data->inbuf not being allocated
before processing and that could have resulted in NULL pointer
dereference. Fix that by explicitly checking for data->inbuf to be
available before using it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
a143bdc0d1 tests: EAP-pwd local error cases on server
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
fe76f487e2 EAP-pwd server: Fix reassembly buffer handling
data->inbuf allocation might fail and if that were to happen, the next
fragment in the exchange could have resulted in NULL pointer
dereference. Unexpected fragment with more bit might also be able to
trigger this. Fix that by explicitly checking for data->inbuf to be
available before using it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 02:23:31 +03:00
Jouni Malinen
a9d224f560 EAP-pwd server: Fix a memory leak on error path
eap_pwd_h_final() needs to be called to free the value from
eap_pwd_h_init() even in error cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 01:48:40 +03:00
Jouni Malinen
0a9ff3810b tests: Addition WPS local error case coverage
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 00:55:16 +03:00
Jouni Malinen
d45a241933 tests: OWE invalid Association Response frame contents
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 22:37:18 +03:00
Jouni Malinen
5a52d8da95 tests: Opportunistic Wireless Encryption - local errors on supplicant
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 22:02:39 +03:00
Jouni Malinen
bfce94e094 tests: WPA2-PSK and local error cases on supplicant
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 21:35:04 +03:00
Jouni Malinen
50b915f055 tests: Additional coverage for EAP-MSCHAPv2 local error cases
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 21:25:27 +03:00
Jouni Malinen
90ee1bf5f1 EAP-MSCHAPv2: Propagate GetAsymetricStartKey() failures up from getKey()
Report failure from getKey() if MSK cannot be derived due to unexpected
sha1_vector() local failure.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 21:21:35 +03:00
Jouni Malinen
d804155783 tests: Milenage local error cases
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 21:09:50 +03:00
Jouni Malinen
fad1a1e340 tests: Previously missed aes_s2v() error path
This targets the omac1_aes_vector() call from within the 0..num_elem-1
loop in aes_s2v().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 20:54:25 +03:00
Jouni Malinen
63215b32a8 tests: AES-EAX error cases that were previously missed in EAP-PSK
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 20:39:45 +03:00
Jouni Malinen
8030e2b594 tests: Protocol testing for supplicant PMF/IGTK KDE handling
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 19:31:34 +03:00
Jouni Malinen
824cb5a530 RSN: Ignore IGTK configuration errors with swapped KeyID values
There are number of deployed APs with broken PMF implementation where
the IGTK KDE uses swapped bytes in the KeyID field (0x0400 and 0x0500
instead of 4 and 5). Such APs cannot be trusted to implement BIP
correctly or provide a valid IGTK, so do not try to configure this key
with swapped KeyID bytes. Instead, continue without configuring the IGTK
so that the driver can drop any received group-addressed robust
management frames due to missing keys.

Normally, this error behavior would result in us disconnecting, but
there are number of deployed APs with this broken behavior, so as an
interoperability workaround, allow the connection to proceed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 19:31:34 +03:00
Jouni Malinen
dfdabd917a RSN: Report completion only after IGTK configuration
Previously wpa_supplicant_key_neg_complete() was called before the
attempt to configure the IGTK received from the authenticator. This
could resulted in somewhat surprising sequence of events if IGTK
configuration failed since completion event would be followed by
immediate disconnection event. Reorder these operations so that
completion is reported only if GTK and IGTK are configurated
successfully.

Furthermore, check for missing GTK KDE in case of RSN and handle that
with an explicit disconnection instead of waiting for the AP to deliver
the GTK later.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 19:31:08 +03:00
Wiktor Drewniak
bce3d4f70e autoscan: Disable when we move above WPA_SCANNING state
In case of drivers that don't use wpa_supplicant as SME, autoscan
feature was never disabled.

Signed-off-by: Wiktor Drewniak <wiktor.drewniak@gmail.com>
2019-04-16 01:53:21 +03:00
Sergey Matyukevich
eb3234c07b SAE: Use open authentication to reassociate for PMKSA caching
For reassociation with the same AP wpa_supplicant attempts to use cached
PMKSA. For this purpose PMKID is passed in RSNE in (Re)Association
Request frame. In the case of SAE AP, open authentication shall be used
during reassociation. Otherwise cached PMKID becomes invalid after full
SAE authentication.

The previous implementation correctly handles SME-in-wpa_supplicant
cases. However SME-in-driver cases, complete SAE authentication is
performed. As a result, first reassociation attempt fails.

Fix SME-in-driver behavior by reseting authentication algorithm to
WPA_AUTH_ALG_OPEN when reassociating with SAE AP with an existing PMKSA
cache entry.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-04-16 01:53:21 +03:00
Avraham Stern
fe01cd0067 Fix FILS ERP association event with 4-way HS offload drivers
When FILS authentication is used with ERP, no EAPOL frames are expected
after association. However, for drivers that set the
WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_8021X capability flag, the EAP state
machine was not configured correctly and was waiting for EAPOL frames,
which leads to disconnection.

Fix this by reordering the if branches to set the EAPOL/EAP state
machines to success when FILS authentication was already completed.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-04-16 01:53:21 +03:00
Ilan Peer
323a51cc01 nl80211: Handle NL80211_CMD_PROBE_CLIENT command response
When processing the NL80211_CMD_PROBE_CLIENT command response, the
nl80211 layer in the kernel sends a response containing the cookie
associated with the client probe request. This response was not handled
by driver_nl80211.c when sending the command, and it was mistakenly
handled as an asynchronous event. This incorrect event did not include
the MAC/ACK attributes, so it was ignored in practice, but nevertheless,
the command response should not be processed as an event.

Fix this by reading the response as part of the sending the command
flow.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-04-16 01:53:18 +03:00
Jouni Malinen
5e6c54bee8 tests: AP with open mode and STA poll without ACK
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-16 01:52:36 +03:00
Jouni Malinen
28f19a3ae5 nl80211: More detailed PROBE_CLIENT debug print
Include the MAC address of the peer, knowledge of whether the poll was
ACKed, and cookie into the debug message to make this more useful.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-16 01:52:34 +03:00
Jouni Malinen
9c4554a9b7 tests: SA Query timeout
Verify wpa_supplicant behavior on SA Query timeout and
disconnection/reconnection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-16 00:48:27 +03:00
Andrei Otcheretianski
31cf52bf2e Do not clear FT IEs twice in sme_deinit()
Remove FT IEs clearing from sme_deinit() as it is done twice. The
sme_clear_on_disassoc() call to sme_update_ft_ies() takes care of this.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-04-16 00:48:27 +03:00
Andrei Otcheretianski
01ac337b32 Stop SA Query on disconnection
SA Query wasn't stopped after disconnection, which could potentially
result in an unexpected SA timeout firing later when already connected
to another AP. Fix that by stopping SA Query when an association is
terminated.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-04-16 00:48:27 +03:00
Jouni Malinen
7a206c504f Add debug print on stopping SA Query procedure
This makes it easier to debug SA Query behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-16 00:42:58 +03:00
Andrei Otcheretianski
710c692381 P2PS: Cleanup pending_p2ps_group flag
pending_p2ps_group flag is not always cleaned, which may later result
in an unexpected GO bring up, after PD response is transmitted in
wpas_prov_disc_resp_cb().
This can be seen when running the following hwsim tests together:
 - p2ps_channel_sta_connected_disallow_freq_mcc
 - p2ps_channel_active_go_and_station_different_mcc
Fix this by clearing pending_p2ps_group flag also when processing new
PD requests. In addition, set this flag only when really needed.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-04-16 00:19:03 +03:00
Jouni Malinen
0be8b9238f mka: Avoid memory leak in unexpected case in RECEIVE
It looks like it is possible for the RECEIVE state to leak memory where
a previously allocated sm->lki is moved to sm->oki while sm->oki is
pointing to not yet freed entry. It is not clear how this can be
triggered, but it has come up in hwsim testing under heavy load.

Free sm->oki if it is still set in RECEIVE before replacing it with
sm->lki to avoid this memory leak.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 22:50:06 +03:00
Jouni Malinen
984d5b7e1f mesh: Fix random llid generation in an error case
If os_get_random() fails, llid must not be read/used since it could be
uninitialized. Handle that special case by clearing llid explicitly to 0
to continue iteration.

Fixes: 5f92659d88 ("mesh: Add mesh peering manager")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 22:26:07 +03:00
Jouni Malinen
10cf866bac mesh: Fix operations after SAE state machine removing the STA
It is possible for the SAE state machine to remove the STA and free the
sta pointer in the mesh use cases. handle_auth_sae() could have
dereferenced that pointer and used freed memory in some cases. Fix that
by explicitly checking whether the STA was removed.

Fixes: bb598c3bdd ("AP: Add support for full station state")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 22:09:12 +03:00
Jouni Malinen
153d4c501a mesh: Fix SAE reauthentication processing
ap_free_sta() frees the sta entry, so sta->addr cannot be used after
that call. Fix the sequence of these two calls to avoid use of freed
memory to determine which PMKSA cache entry to remove.

Fixes: 9f2cf23e2e ("mesh: Add support for PMKSA caching")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 21:57:58 +03:00
Jouni Malinen
2f68051395 Fix hostapd BSS_TM_REQ handling of bss_term parameter
The TSF field in BSS termination information was not cleared correctly.
It was supposed to be cleared to all zeros, but the memset call did not
point at offset 2; instead, it cleared it with 0x02 octets and also
cleared the subelement header with 0x02 octets while leaving two last
octets uninitialized.

Fixes: a30dff07fb ("Add BSS_TM_REQ command to send BSS Transition Management Request")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 21:11:46 +03:00
Jouni Malinen
e6ac47b47d Fix debug print in GET_PREF_FREQ_LIST handler
Do not use the buf argument to wpas_ctrl_iface_get_pref_freq_list() in
the debug print since it points to the response buffer ("OK\n" without
null termination). This was supposed to print the cmd argument instead.
The previous version ended up using uninitialized heap memory from the
response buffer.

Fixes: 983422088f ("nl80211: Add means to query preferred channels")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 20:54:12 +03:00
Jouni Malinen
2e70e807c8 D-Bus: Fix P2P GroupStarted signal not to use uninitialized IP buffer
wpas_p2p_completed() used wpa_sm_get_p2p_ip_addr() return value properly
for filling in the ip_addr[] string only if the IP addresses got
assigned, but the raw ip[] array was passed to
wpas_dbus_signal_p2p_group_started() regardless of whether the IP
addresses were assigned. This could result in using uninitialized stack
memory for constructing the GroupStarted signal values. Fix this by
filling those in only if the IP addressed are actually available.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 20:27:52 +03:00
Jouni Malinen
6541b9dbe7 tests: Avoid confusing "DETACH failed" exception prints in D-Bus tests
dbus_p2p_go_neg_init, dbus_p2p_group_idle_timeout, and
dbus_p2p_group_termination_by_go could end up print a "DETACH failed"
exception as a warning from WpaSupplicant.__del__ for the dev1 instance
used within the TestDbusP2p class. This did not cause the test cases to
fail, but the output is a bit confusing, so clean this up be explicitly
closing the control interface monitor sockets and furthermore by
ignoring the "DETACH failed" exception within __del__.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 20:13:28 +03:00
Jouni Malinen
c975c667f8 Remove hwsim_test
This external tool was used for testing data connectivity with
mac80211_hwsim. However, the last user for it was removed in 2014 by
commit 1131a1c8d2 ("tests: Replace last remaining hwsim_test uses with
DATA_TEST"), so there is not point in maintaining this forgotten test
tool in the repository anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-15 12:44:41 +03:00
Jouni Malinen
8860182449 tests: Unsupported WNM Action
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 17:38:15 +03:00