Commit graph

40 commits

Author SHA1 Message Date
Jouni Malinen
205a372b2d Added libnl 2.0 compatibility code (CONFIG_LIBNL20=y in .config needed)
Unfortunately, at least the current libnl git snapshot changes the API
in backwards incompatible way and in a way that makes it difficult to
to allow building against the latest libnl code.
2008-12-08 22:40:58 +02:00
Jouni Malinen
7e45830ab7 nl80211: Include copy of linux/nl80211.h with hostapd/wpa_supplicant
This makes it easier to build the packages and allows all new features
to be built into the binary regardless of which kernel is currently
used.
2008-12-08 11:04:13 +02:00
Jouni Malinen
bb9f45e0bb nl80211: Remove the debug print from data frame processing
This is currently happening way too frequently (mac80211 monitor
interface sends TX info for every frame) and the end result makes it
difficult to read hostapd debug log if there is large amount of data
traffic.
2008-12-04 14:20:33 +02:00
Jouni Malinen
4a7b9f885f Fixed WEP authentication (both Open System and Shared Key) with mac80211
Only one of the authentication frame types is encrypted. In order for
static WEP encryption to work properly (i.e., to not encrypt the frame),
we need to tell mac80211 about the frames that must not be encrypted.
2008-12-04 13:21:35 +02:00
Jouni Malinen
f07688e37d nl80211: Generate 802.11b mode based on 802.11g information
If the phy info from nl80211 does not include 802.11b mode, generate
that mode based on 802.11g information. This allows hw_mode=b to be used
with drivers that support 2.4 GHz band.
2008-12-03 12:42:21 +02:00
Jouni Malinen
2f4eb31454 Changed NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to use U32 2008-11-26 16:16:28 +02:00
Jouni Malinen
a78d3dbd02 nl80211: Fixed a merge issue in an earlier commit for set_freq 2008-11-26 10:52:45 +02:00
Jouni Malinen
446842b101 nl80211: Clear HT flags from the channel when exiting 2008-11-26 10:51:01 +02:00
Jouni Malinen
fe0f58fa69 Added option to distinguish non-HT and HT20 in set_freq 2008-11-26 10:44:04 +02:00
Jouni Malinen
95da9bbc36 nl80211: Add support for setting channel frequency and HT20 vs. HT40
This depends on a patch to Linux nl80211/mac80211 that has not yet been
merged into wireless-testing. If that change is not present, the old
mechanism (WEXT) will be used instead.
2008-11-25 20:59:39 +02:00
Jouni Malinen
d6c9d4740b driver_nl80211: Added set_country() handler
If country_code is set in hostapd.conf, hostapd will now update nl80211
regulatory data by setting the alpha2 string for CRDA. In other words,
"iw reg set <alpha2>" is not needed anymore when using hostapd.
2008-11-25 12:10:35 +02:00
Jouni Malinen
bf01d8bc2b Get maximum TX power for each allowed channel from mac80211 2008-11-25 11:11:50 +02:00
Jouni Malinen
9ee06a63e5 driver_nl80211: Remove monitor interface if AP initialization fails 2008-11-18 14:55:32 +02:00
Jouni Malinen
10b83bd712 Changed channel flags configuration to read the information from the driver
(e.g., via driver_nl80211 when using mac80211) instead of using hostapd as
the source of the regulatory information (i.e., information from CRDA is
now used with mac80211); this allows 5 GHz channels to be used with hostapd
(if allowed in the current regulatory domain).
2008-11-18 14:51:43 +02:00
Johannes Berg
4aac554ce2 driver_nl80211: Remove set_ssid from nl80211 driver
This is no longer required (and does not work with current
wireless-testing anymore).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-11-01 13:45:34 +02:00
Jouni Malinen
fefee8a74d driver_nl80211: Added TX queue parameter configuration 2008-10-29 19:35:17 +02:00
Jouni Malinen
4c99a969e3 driver_nl80211: Added basic rate configuration 2008-10-29 19:34:27 +02:00
Jouni Malinen
8e8df25541 nl80211: Finish dumps properly (ported from iw.git) 2008-10-29 19:28:35 +02:00
Johannes Berg
cafe38cae0 nl80211 hostapd driver: clean up netlink code
Put it into a single place instead of having it all over.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-09-29 19:37:24 +03:00
Johannes Berg
6773de39b1 nl80211 driver: correctly set the encrypt bit for eapol frames
A recent kernel change led to all EAPOL frames being encrypted rather than
just those for the group handshake. This is due to transmit processing in
the kernel now using the proper interface which would encrypt those frames
with the group key because hostapd wasn't requesting that they not be
encrypted. This changes the nl80211 driver to not request encryption unless
the EAPOL frame should be encrypted.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-09-29 19:21:51 +03:00
Jouni Malinen
9b71728bba Cleaned up TX callback request processing
Move the use of 802.11 header protocol field into driver_hostap.c since
this is a Host AP driver specific mechanism and other driver wrappers
should not really need to know about it.
2008-08-31 11:15:56 +03:00
Jouni Malinen
00ad53ef68 Send HT parameters for new STAs
This depends on a mac80211 patch to add NL80211_ATTR_HT_CAPABILITY
(which is not yet in wireless-testing).
2008-08-25 11:30:39 +03:00
Jouni Malinen
f2c290ccf4 Switched driver_nl80211 to use the new sta_add2() 2008-08-25 10:06:40 +03:00
Jouni Malinen
358921edb7 Added support for setting BSS parameters with NL80211_CMD_SET_BSS
This new cfg80211 command is used for setting CTS protect, short preamble,
and short slot time parameters for the BSS. The matching kernel change has
been submitted, but is not yet included in wireless-testing. The code here
used #ifdef to avoid compilation failures before the new command is
available.
2008-08-07 20:09:55 +03:00
Jouni Malinen
eb0699b6ba Add IGTK/MFP configuration (disabled by default)
Added code to use suggested nl80211/cfg80211 API for setting MFP related
parameters. This is disabled by default since the API changes has not yet
been approved. The new commands can be enabled by defining
NL80211_MFP_PENDING (this will be removed once the API changes is
approved).
2008-06-18 11:23:59 +03:00
Jouni Malinen
94e5af7948 Added support for configuring IGTK
This needs changes in kernel code, too, but the cipher suite for IGTK is
defined in IEEE 802.11w, so this code in hostapd side can be added now.
2008-06-16 11:20:01 +03:00
Jouni Malinen
3f3339dfe7 Fixed a buffer overflow in nla_parse call
The first argument (tb) to nla_parse must have room for maxtype+1, not
maxtype, elements.
2008-06-06 16:51:17 +03:00
Jouni Malinen
8479707beb Include wireless_copy.h instead of linux/wireless.h to avoid conflicts
linux/wireless.h ends up including number of Linux kernel header files and
many of the definitions are conflicting with (or at least duplicating)
definitions in net/if.h.
2008-06-03 11:31:42 +03:00
Jouni Malinen
0d58229994 Small whitespace cleanup 2008-04-13 12:48:59 +03:00
Michael Bernhard
4c6122c397 driver_nl80211: Do not send nl80211 message if beacon is not set yet
Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:41:30 +03:00
Michael Bernhard
f4a5a7468d driver_nl80211: Return correct value
Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:40:24 +03:00
Michael Bernhard
a325926a9c driver_nl80211: Initialize local variable
This solves the problem with out-of-sync ACK messages.

Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:39:13 +03:00
Michael Bernhard
99c55ef92f driver_nl80211: Clone netlink callbacks instead of creating new ones
This way the default callbacks are inherited.

Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:37:49 +03:00
Bernhard Michael
f7868b5018 driver_nl80211: Use customizable netlink callbacks
This allows the use of NL_CB_VERBOSE or NL_CB_DEBUG.

Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:36:23 +03:00
Michael Bernhard
7cc92d7275 driver_nl80211: Use the correct nl80211 command to flush all stations
Signed-off-by: Michael Bernhard <michael.bernhard at bfh.ch>
2008-04-13 12:33:59 +03:00
Johannes Berg
dda803699f nl80211 driver: fix beacon interval setting
This removes the hard-coded beacon interval setting.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-04-09 10:11:04 +03:00
Artem Antonov
eaaab2bd98 Fix nl80211 driver to receive EAPOL response
This patch fixes nl80211 driver to receive EAPOL response if wlan0 was
added to bridge.
2008-04-08 09:49:06 +03:00
Daniel Wagner
913cf1caec Rename NL80211_[ATTR]_STA_STAT_* to NL80211_[ATTR_]STA_INFO_
adapt to change 72141605e9f9d856418bbed9dc47e5ad42aabb42
nl80211/cfg80211: support for mesh, sta dumping

Signed-off-by: Daniel Wagner <wagi@monom.org>
2008-03-31 12:39:52 +03:00
Jouni Malinen
dc366e8e85 Added listen interval to hostapd sta_add() driver function 2008-02-27 17:45:00 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00