Commit graph

994 commits

Author SHA1 Message Date
Sunil Dutt
d16531c40c TDLS: Pass peer's Capability and Ext Capability info during sta_add
The contents of the peer's capability and extended capability
information is required for the driver to perform TDLS P-UAPSD and Off
Channel operations. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:02:34 +02:00
Jouni Malinen
e4dea253b7 nl80211: Add debug prints for STA add/set operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:19 +02:00
Jouni Malinen
cd8db7c3ba Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-14 21:00:56 +02:00
Jouni Malinen
c5f10e804a Use more accurate timestamps for scan results
For various P2P use cases, it is useful to have more accurate timestamp
for the peer information update. This commit improves scan result
handling by using a single timestamp that is taken immediately after
fetching the results from the driver and then using that value to
calculate the time when the driver last updated the BSS entry. In
addition, more debug information is added for P2P peer updates to be
able to clearly see how old information is being used here.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-12 19:14:32 +02:00
Vladimir Kondratiev
ff3ad3c531 Capability matching for 60 GHz band
On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2013-02-07 16:20:18 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Mark Kettenis
5f7ae5e61c Add driver for OpenBSD net80211 layer
Very basic support for OpenBSD.  No support for scanning yet, so this needs
ap_scan=0 and expects that the user has configured the interface manually
using ifconfig(8).

Signed-hostap: Mark Kettenis <kettenis@openbsd.org>
2013-02-03 21:16:29 +02:00
Jouni Malinen
9ebce9c546 nl80211: Do not use void pointer for driver_ops used internally
This allows some more pointer type validation at compile time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 15:46:47 +02:00
Ben Greear
085b29f1fe hostapd: Fix crash when scan fails
When scan failed, the wpa_driver_nl80211_scan method tried
to recursively call itself, but it passed in the wrong argument
for the void*, and so then it crashed accessing bad memory.

With this fix, hostapd still will not retry the scan later, but
at least it will exit cleanly and won't polute the file system
with core files.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2013-02-03 13:51:54 +02:00
Jouni Malinen
8b706a99b8 nl80211: Add MFP information for NL80211_CMD_CONNECT
This was previously included only with NL80211_CMD_ASSOCIATE, but the
information is as useful (if not even more useful) for
NL80211_CMD_CONNECT. It should be noted that cfg80211 does not yet use
this attribute with NL80211_CMD_CONNECT, but that can be added easily.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-12 17:51:54 +02:00
Johannes Berg
05a8d4221d nl80211: Pass station VHT capabilities to kernel
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
a9a1d0f08a hostapd: Pass VHT capabilities to driver wrapper
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
89b800d726 nl80211: Support VHT configuration
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
ebeca8e3d1 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Johannes Berg
fa4763369a hostapd: Allow configuring driver to VHT
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
708bc8e0e4 nl80211: Restore previous nlmode if set_freq for AP mode fails
wpa_driver_nl80211_ap() returned error if set_freq failed, but left the
previously set nlmode to GO/AP. While this should not be issue for most
purposes, it leaves the interface in somewhat unexpected state and could
potentially affect operations prior to next connection attempt. Address
this by restoring the previous nlmode if AP mode cannot be started for
some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-08 00:34:08 +02:00
Baruch Siach
50d405ec87 atheros: Release sock_raw and reset appfilter on hapd_init failure
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-12-25 13:50:41 +02:00
Yoni Divinsky
3dfd0484fc P2P: Consider age for the P2P scan results
cfg80211 caches the scan results according the channel number. Due to
the 15 sec aging this might cause the user mode to see more than one
scan result with the same BSSID, e.g. - one scan result for the
P2P Device and one for the P2P GO (once it's enabled).

Fix this by updating the device entry only if the new peer entry is
newer than the one previously stored.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-hostap: Arik Nemtsov <arik@wizery.com>
2012-12-25 11:22:42 +02:00
Sven Eckelmann
a5e1eb2092 nl80211: Run TKIP countermeasures in correct hostapd_data context
hostapd can run with different VIF when using nl80211. Events about MIC
failures have to be processed in context of the VIF which received it
and not in context of the primary VIF. Otherwise the station belonging
to this VIF may not be found in the primary VIF station hash and
therefore no countermeasures are started or the countermeasures are
started for the wrong VIF.

Signed-hostap: Sven Eckelmann <sven@open-mesh.com>
Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2012-12-22 16:19:52 +02:00
Vladimir Kondratiev
7829894c21 Introduce 60 GHz band
Basic support for the 60 GHz band. Neither P2P nor WPS are yet taken
care off. Allows to start AP with very simple config:

network={
        ssid="test"
        mode=2
        frequency=60480
        key_mgmt=NONE
}

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-18 11:50:35 +02:00
Jouni Malinen
ad3872a372 WNM: Use CONFIG_WNM more consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. Previously it was possible to
define CONFIG_IEEE80211V without CONFIG_WNM which would break the build.
In addition, IEEE 802.11v has been merged into IEEE Std 802.11-2012 and
WNM is a better term to use for this new functionality anyway.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 18:22:54 +02:00
Jouni Malinen
bd896433af nl80211: Register to process WNM-Sleep Mode Response frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:42:26 +02:00
Amitkumar Karwar
368b1957a6 Allow OBSS scan and 20/40 coex reports to non-SME drivers
We enable this feature for non-SME drivers as well if
they explicitly indicate need for it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
2012-11-24 18:08:48 +02:00
Jouni Malinen
3d83a6b9b6 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 18:04:55 +02:00
Pontus Fuchs
fb660a9431 Do not double free cfg struct if netlink_init() fails
If netlink_init() fails on socket create or bind the cfg struct
provided as parameter is freed by netlink_init(). Callers of
netlink_init() also free this struct on their error paths leading
to double free.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2012-11-24 16:47:20 +02:00
Jouni Malinen
6201b052c8 nl80211: Add support for TDLS request event from the driver
The NL80211_CMD_TDLS_OPER command can be used as an event based on a
recent cfg80211 commit, so add code to map that to internal
wpa_supplicant event to request TDLS link setup/teardown.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-19 17:00:07 +02:00
Jouni Malinen
1ce0aa044c Remove unused disassociate() driver_ops
Commits 07783eaaa0 and
3da372fae8 removed the only users of the
disassociate() driver operation, so these driver wrapper functions can
also be removed now.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-15 00:06:12 +02:00
Jouni Malinen
9d7a63dc20 nl80211: Avoid strict-aliasing warning with gcc 4.7
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:28:27 +02:00
Christopher Wiley
a8c5b43ad3 nl80211: Roam correctly through cfg80211 without SME
Change the nl80211 driver in wpa_supplicant to correctly handle
connecting to a new AP through cfg80211 without SME capability. As
before, the driver will disconnect from the previously associated AP,
but now we attempt to immediately connect to our intended AP. This
prevents us from blacklisting the AP we were trying to connect to
because of a semantic mismatch between cfg80211 and wpa_supplicant. The
disconnect/connect patch generates a local disconnect nl80211 event
which we discard because we're already correctly tracking the pending
association request.

In detail:

cfg80211 does not support connecting to a new BSS while already
connected to another BSS, if the underlying driver doesn't support
separate authenticate and associate commands. wpa_supplicant is written
to expect that this is a supported operation, except for a little error
handling that disconnects from the current BSS when roaming fails and
relies on autoconnect logic to reconnect later. However, this failure to
connect is incorrectly attributed to the new AP we attempted to
associate with, rather than a local condition in cfg80211.

The combined effect of these two conditions is that full-mac drivers
accessible through cfg80211 but without SME capability take a long time
to roam across BSS's because wpa_supplicant will:
1) Fail to associate for local reasons
2) Disconnect and return that the association request failed
3) Blacklist the association target (incorrectly)
4) Do a scan
5) Pick a less desirable AP to associate with

Signed-hostap: Christoper Wiley <wiley@chromium.org>
2012-11-11 16:15:29 +02:00
Baruch Siach
b49019dd3d atheros: Remove redundant l2_packet_get_own_addr call
Commit deca6eff74 added a redundant call
to l2_packet_get_own_addr. Use the information we already have in
atheros_init.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-11-11 16:07:28 +02:00
Jouni Malinen
7d81932d27 nl80211: Make debug log more readable for driver events
Print the full name of the nl80211 event message in the debug log to
make it easier to parse the debug log.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-03 13:54:43 +02:00
Jouni Malinen
04a3e69dd1 P2P: Allow all channels with multi-channel concurrency
If the driver indicates support for multi-channel concurrency, change
the p2p_connect behavior to not force the current operating channel, but
instead, just mark it as preferred for GO Negotiation. This change
applies only for the case when the freq parameter is not used with the
p2p_connect command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-10-26 18:10:46 +03:00
Jouni Malinen
569fed9045 nl80211: Add support for SAE operations
This uses the recent cfg80211 changes to allow SAE authentication to be
implemented with the nl80211 driver interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-24 09:10:42 +03:00
Jouni Malinen
516059c753 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-24 09:08:38 +03:00
Vladimir Kondratiev
c097652828 60 GHz: Fix error while processing scan results
Channel frequency for 60 GHz band do not fit into 'short int', as was
used. Expand it to 'int'

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-10-04 16:32:23 +03:00
Jouni Malinen
369c8d7bcd Reserve AKM and cipher suite values
These values are used with WAPI and CCX and reserving the definitions
here reduces the number of merge conflicts with repositories that
include these functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 20:26:55 +03:00
Jouni Malinen
c10347f246 Add initial parts for SAE
This introduces new AKM for SAE and FT-SAE and adds the initial parts
for going through the SAE Authentication frame exchange. The actual SAE
algorithm and new fields in Authentication frames are not yet included
in this commit and will be added separately. This version is able to
complete a dummy authentication with the correct authentication
algorithm and transaction values to allow cfg80211/mac80211 drivers to
be tested (all the missing parts can be handled with
hostapd/wpa_supplicant changes).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 19:51:07 +03:00
Jouni Malinen
905029097c Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 10:49:46 +03:00
Mykyta Iziumtsev
817762d9c4 nl80211: Don't send BSSID with disconnect command
NL80211_CMD_DISCONNECT doesn't need BSSID, because cfg80211
uses locally saved value.

Signed-hostap: Mykyta Iziumtsev <mykyta.iziumtsev@gmail.com>
2012-09-29 19:01:50 +03:00
Felix Fietkau
73a3c6ffca nl80211: Use the monitor interface if socket tx status is not supported
Fixes hostapd on recent compat-wireless builds with older kernels.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-23 13:28:31 +03:00
Felix Fietkau
92d521d89c hostapd: Send EAPOL frames from the VO queue if WMM is active
This avoids extra latency caused by establishing an aggregation session
and makes the initial connection attempt more reliable

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:40:00 -07:00
Felix Fietkau
c34e618d47 hostapd: Fix WDS VLAN bridge handling
This patch fixes an issue where removing a WDS VLAN interface also
removed the main AP interface from the same bridge.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:38:14 -07:00
Baruch Siach
ac947e2a83 atheros: Fix RSN capabilities debug print
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-09-05 19:01:11 +03:00
Jouni Malinen
d732463c47 nl80211: Register read_sta_data() handler for station only builds
This driver_op can now be used in station mode, too, to fetch
information about the connection with the AP, so allow this to be used
even if wpa_supplicant is built without AP mode support.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-05 17:07:03 +03:00
Yuhao Zheng
dc7785f845 wpa_supplicant: Add PKTCNT_POLL command to get TX/RX packet counters
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-09-05 17:02:02 +03:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Wei-Jen Lin
e3e234fa35 nl80211: Set P2P multichan concurrency based on interface combinations
Use the NL80211_IFACE_COMB_NUM_CHANNELS value > 1 as a trigger for
enabling support for P2P multichannel channel concurrency. This does not
handle all possible details of enforcing driver capabilities, but it is
a good first step for allowing nl80211 drivers to enable multichannel
concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 19:31:58 +03:00
Jouni Malinen
1e05192eec test: Fix driver data pointer for the P2P commands
The driver_test.c data structures had been changed to use a separate
BSS structure, but the P2P commands were not using the new design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 20:44:24 +03:00
Jouni Malinen
37448ede31 P2P: Add option for adding extra delay to p2p_find
A new optional delay=<search delay in milliseconds> parameter can now be
used with p2p_find command to request an extra delay between search
iterations. This can be used, e.g., to make p2p_find friendlier to
concurrent operations by avoiding it from taking 100% of the radio
resources.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 18:20:58 +03:00
Jouni Malinen
75227f3ada nl80211: Print an error if WDS STA interface cannot be set up
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:28:55 +03:00
Dan Williams
e7ecddf33a build: Use updated libnl3 header paths
libnl3's headers live in /usr/include/libnl3 for some time now.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2012-08-15 20:44:33 +03:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Michael Braun
03a6a2e972 Add option to use netlink to create and remove VLAN interfaces
CONFIG_VLAN_NETLINK=y build option can now be used to replace the
ioctl()-based interface for creating and removing VLAN interfaces
with netlink-based interface.

Signed-hostap: M. Braun <michael-dev@fami-braun.de>
2012-08-10 14:09:05 +03:00
Jouni Malinen
1d0c6fb1eb nl80211: Fix re-enabling of 802.11b rates after P2P use
Commit a11241fa11 removed the 802.11b rate
enabling/disabling code from wpa_driver_nl80211_set_mode() and while
doing that, removed the only place where drv->disabled_11b_rates was
set. Fix this by updating the flag in nl80211_disable_11b_rates(). In
addition, re-enable the 802.11b rates when changing to non-P2P mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:48:57 +03:00
Rajkumar Manoharan
edb9bfba89 nl80211: Disable 11b rates on configuring P2P interface
Right now 11b rates are masked out while creating a P2P interface,
but this is always failing as the interface is down. Most drivers
allow to configure rates only when the interface is UP and running.
So let us disable 11b rates when interface type is changed into a
P2P type and it is UP and running.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-10 11:35:33 +03:00
Jouni Malinen
d99619b243 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:21:16 +03:00
Jouni Malinen
df2f9ec6b2 nl80211: Add nla_put_u32() wrapper for Android
The system/core/libnl_2 re-implementation in AOSP does not include
nla_put_u32().

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-09 18:45:39 +03:00
Jouni Malinen
95ac3bf49f nl80211: Share common function for scan parameters
trigger_scan and start_sched_scan can share code for building the
common attributes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:48:52 +03:00
Jouni Malinen
f0494d0f95 nl80211: Check nla_put_nested() return value and handle errors
Couple of functions did not verify that nla_put_nested() succeeded. Fix
these by checking the return value and handling error cases cleanly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:27:55 +03:00
Jouni Malinen
6afbc3d698 nl80211: Fix netlink error paths in sched_scan() handler
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:11:08 +03:00
Ben Greear
addde1399e Better logging for ioctl set flags failure
Let user know if the call failed setting interface up vs. down.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-08-04 20:41:35 +03:00
Paul Stewart
21270bb4b3 Fix a couple memory leaks
Found using valgrind.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-04 20:10:08 +03:00
Xi Chen
c7673de462 atheros: Implement WNM-Sleep Mode driver operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:30 +03:00
Xi Chen
a884be9da1 WNM: Add placeholders for WNM driver commands and events
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:20 +03:00
Jay Katabathuni
ada8a5bd60 atheros: Add HS 2.0 Action frame TX/RX support
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:17 +03:00
Jay Katabathuni
e1e3b5bb34 atheros: Add support for Action frame TX/RX
This allows hostapd to send and receive various Action frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:11:59 +03:00
Mahesh Palivela
7d9c0cd345 Add support for using SA Query with drivers that implement MLME
This allows the SA Query mechanism in hostapd to be used with drivers
that implement authentication and association MLME/SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:11:56 +03:00
Jouni Malinen
e509167495 Add new drv_flag for indicating user space AP MLME
This makes it easier for hostapd to determine at runtime which
operations to use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-01 10:34:35 +03:00
Jouni Malinen
8342185012 HS 2.0: Add mechanism for disabling DGAF
disable_dgaf=1 in hostapd.conf can now be used to disable downstream
group-addressed forwarding (DGAF). In this configuration, a unique
GTK (and IGTK) is provided to each STA in the BSS to make sure the
keys do not match and no STA can forge group-addressed frames.

An additional mechanism in the AP needs to be provided to handle some
group-addressed frames, e.g., by converting DHCP packets to unicast
IEEE 802.11 frames regardless of their destination IP address and by
providing Proxy ARP functionality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:52 +03:00
Thomas Pedersen
bf8d6d2430 nl80211: Support setting sched scan RSSI threshold
Allow the user to configure an RSSI threshold in dBm below which the
nl80211 driver won't report scan results. Currently only supported
during scheduled (PNO) scans.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:56:43 +03:00
Mahesh Palivela
990933fb1d nl80211: Save VHT capabilities from the driver
Save VHT capabilities coming through nl80211 within hostapd.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-07-04 21:42:56 +03:00
Jouni Malinen
80518c073b Sync with linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-04 21:40:31 +03:00
Jouni Malinen
0cb87fdeb5 Update license notification in driver_wired.c
This updates the license notification to use only the BSD license. The
changes were acknowledged by email (Gunter Burchardt, tmisu@gmx.de,
Mon, 02 Jul 2012 17:54:28 +0200).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 20:50:03 +03:00
Jouni Malinen
cb2b381169 Update license notification in roboswitch interface file
This updates the license notification to use only the BSD license. The
changes were acknowledged by email (Jouke Witteveen
<j.witteveen@gmail.com>, Mon, 2 Jul 2012 11:38:34 +0200).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 12:43:16 +03:00
Jouni Malinen
3df2f4fe99 P2P: Remove unused P2P_SCAN_SPECIFIC
This is not used anymore after the commit
e6ecfc4fd3.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 20:20:29 +03:00
Jouni Malinen
d001defeec Update license notification in files initially contributed by Sam
This updates these files to use the license notification that uses only
the BSD license. The changes were acknowledged by email (Sam Leffler
<sam@errno.com>, Sat, 30 Jun 2012 07:57:53 -0700).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 19:36:04 +03:00
Mahesh Palivela
efe45d1471 hostapd: Initial IEEE 802.11ac (VHT) definitions
Add IEEE 802.11ac definitions for config, IEEE structures, constants.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-06-30 13:52:13 +03:00
Thomas Pedersen
1b487b8b1e nl80211: Handle CH_SWITCH event
Some drivers may independently decide to switch channels. Handle this by
updating the hostapd and wpa_supplicant AP and GO configuration.

Signed-hostap: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
2012-06-25 14:45:14 +03:00
Jouni Malinen
e7381b8473 Sync with include/linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-25 14:34:22 +03:00
Johannes Berg
cad0f50e02 nl80211: Simplify cbmsg buffer
The control message received from the kernel needs some space, but
there's no need for the strange typing that breaks clang compilation.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-06-23 20:37:09 +03:00
Jouni Malinen
ecabb132b9 atheros: Remove unused variables
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-23 20:34:29 +03:00
Baruch Siach
e2e984ea06 atheros: Fix build when WPS and IEEE80211R are both disabled
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-23 20:33:50 +03:00
Jithu Jance
ef35f5a0fd P2P: Add driver op for requesting GO/AP channel switch
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 20:54:31 +03:00
Baruch Siach
3947ed96e8 atheros: Set essid length field only once
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-08 20:28:23 +03:00
Baruch Siach
7aa4251f2f atheros: Fix build when CONFIG_WPS is disabled
The use of ETH_P_80211_RAW does not depend on CONFIG_WPS, so make its
definition independent as well.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-08 20:27:45 +03:00
Johannes Berg
24b5bd8b42 nl80211: Use safe list iteration
In certain cases like PBC session overlap it appears to be possible that
an interface is removed due to an event handled on it, this leads to
list corruption. Use safe iteration to prevent this issue.

Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Reported-by: Neeraj Kumar Garg <neerajkg@broadcom.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
intended-for: hostap-1
2012-06-04 20:25:11 +03:00
Jouni Malinen
b5671498bf nl80211: Use wait_time with AP mode driver SME for offchannel
When sending an offchannel frame (mainly, P2P Invitation Request), the
wait_time parameter was hardcoded to 0 for drivers that implement AP
mode SME. This is not correct and can cause problems for drivers that
support offloading of off-channel operations with driver/firmware based
AP SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:24:31 +03:00
Jouni Malinen
2e3e456623 nl80211: Add more debug info on NL80211_CMD_FRAME uses
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:22:53 +03:00
Jouni Malinen
3bc462cb88 P2P: Add option for Provision Discovery before GO Negotiation
This is a workaround for interoperability issues with some deployed P2P
implementations that require a Provision Discovery exchange to be used
before GO Negotiation. The new provdisc parameter for the p2p_connect
command can be used to request this behavior without having to run a
separate p2p_prov_disc command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 16:25:47 +03:00
Jouni Malinen
349493bd0c Validate WEP key lengths based on driver capabilities
The nl80211 driver interface does not allow 128-bit WEP to be used
without a vendor specific cipher suite and no such suite is defined for
this purpose. Do not accept WEP key length 16 for nl80211 driver
interface forn ow. wext-interface can still try to use these for
backwards compatibility.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-10 14:34:46 +03:00
Jouni Malinen
23c84252a4 P2P: Add option to force SSID/passphrase for GO Negotiation
An existing persistent group information can now be used to force GO
Negotiation to use the previously used SSID/passphrase from a persistent
group if we become a GO. This can be used as an alternative to inviting
a new P2P peer to join the group (i.e., use GO Negotiation with GO
intent 15 instead of starting an autonomous GO and using invitation),
e.g., in case a GO Negotiation Request is received from a peer while we
are not running as a GO. The persistent group to use for parameters is
indicated with persistent=<network id> parameter to p2p_connect.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-27 18:25:30 +03:00
Jouni Malinen
93bcb70571 Sync with include/linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-19 20:41:42 +03:00
Jithu Jance
d3bd0f057c nl80211: Extend shared_freq to handle AP/GO mode interfaces
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-04-08 20:44:05 +03:00
Jouni Malinen
873d0fcfd3 nl80211: Skip set_mode event subscription during deinit
There is no need to subscribe to event messages during deinit process,
so skip this to avoid unnecessary operations and to keep the debug logs
a bit cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-06 18:58:44 +03:00
Ben Greear
9d05374796 Make bind failure messages unique
This helps someone know which part of the code is complaining.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:10:36 +03:00
Jouni Malinen
2e9f078c8d nl80211: Indicate disconnect event as deauthentication
This was previously indicated as disassociation, but the P2P group
session ending case expect a deauthentication notification. Since the
cfg80211 disconnection event does not really indicate which frame was
used, the easiest approach for now seems to be to just indicate these
as deauthentication events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-03 17:11:22 +03:00
Eliad Peller
3c29244eb7 P2P: Add deinit_p2p_cli op to clear P2P client driver state
On P2P group removal, the GO is deinitialized correctly (and the vif
mode is set back to sta in case of nl80211), but the P2P client mode
wasn't deinitialized, and the nl80211 vif stays in P2P client mode.

Add a new deinit_p2p_cli op (similar to deinit_ap), which currently only
sets the interface back to station mode.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-04-01 21:41:23 +03:00
Johannes Berg
baf513d695 Pass signal strength through, fix units
The signal strength is currently never used as the only driver reporting
it is nl80211 which uses IEEE80211_RADIOTAP_DB_ANTSIGNAL which is never
populated by the kernel. The kernel will (soon) populate
IEEE80211_RADIOTAP_DBM_ANTSIGNAL instead though, so use that.

Also, since it was never really populated, we can redefine the signal
field to be in dBm units only.

My next patch will also require knowing the signal strength of probe
requests throughout the code (where available), so add it to the
necessary APIs.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 18:48:12 +03:00
Johannes Berg
da873dbb06 nl80211: Report signal strength from nl80211
Report signal strength from nl80211 events to the higher layers.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 12:39:33 +03:00
Bala Shanmugam
1f6c0ab872 Allow background scan period to be configured
A network block specific background scan period can now be configured
for drivers that implement internal background scan mechanism for
roaming and BSS selection.

Signed-hostap: Bala Shanmugam <bkamatch@qca.qualcomm.com>
2012-03-30 15:20:35 +03:00
Vasanthakumar Thiagarajan
a0133ee1c9 nl80211: Make use of driver's capability to detect inactive stations
When drivers advertise their capability to free up inactive
stations based on ap_max_inactivity, send the inactivity period
timeout to driver in NL80211_ATTR_INACTIVITY_TIMEOUT. This
introduces a WPA_DRIVER_FLAGS (WPA_DRIVER_FLAGS_INACTIVITY_TIMER)
so that the inactivity period will be sent only when this capability
bit is set.

Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-03-27 20:49:44 +03:00
Jouni Malinen
17e729d49c Sync with include/linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-27 20:49:39 +03:00
Aarthi Thiruvengadam
e1bd4e1934 nl80211: Fix deauth/disassoc for AP mode SME-in-driver case
When the driver (or firmware) implements AP mode SME, the use of raw
management frame TX functions is not working properly at the moment. As
an initial step, convert these AP mode operations to use
NL80211_CMD_DEL_STATION and do not claim that driver provides TX status
for deauth/disassoc frames. While this does not address all use cases
(e.g., reason code is not specified in the command), this fixes number
of issues where the station does not get disconnected properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-14 14:06:06 -10:00
Jouni Malinen
360182ed7c P2P: Advertise immediate availability of WPS credential
Use Device Password ID in WSC IE of Probe Request and Probe Response
frames to advertise immediate availability of WPS credentials per P2P
specification sections 3.1.2.1.1 (Listen State), 3.1.2.1.2 (Scan Phase),
and 3.1.2.1.3 (Find Phase).

For now, the Device Password ID is set only for the case where we are
active GO Negotiation with a specific peer. In practice, this means that
the Probe Response frames during pending GO Negotiation (whenever in
Listen state) indicate availability of the credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-27 23:14:35 +02:00
Jouni Malinen
6d441b0da2 wext: Filter unexpected interface added/up events
It looks like a RTM_NEWLINK event claiming the interface to be UP is
delivered just before removing an interface after having first indicated
that the interface was going down/removed. Ignore this event if the
interface is not present anymore at the moment the event is processed.
This fixes issues where an interface that was re-added after being
removed did not get reconfigured properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-02-18 13:28:21 +02:00
Jouni Malinen
d1f4942ba1 nl80211: Filter unexpected interface added/up events
It looks like a RTM_NEWLINK event claiming the interface to be UP is
delivered just before removing an interface after having first indicated
that the interface was going down/removed. Ignore this event if the
interface is not present anymore at the moment the event is processed.
This fixes issues where an interface that was re-added after being
removed did not get reconfigured properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-02-18 13:13:23 +02:00
Jouni Malinen
8a6a1e1b14 nl80211: Indicate p2p_probe in debug log as scan parameter
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-18 12:39:01 +02:00
Shan Palanisamy
deca6eff74 atheros: Add new IEEE 802.11r driver_ops
Add support to send Action frames to the driver.
Add support for TSPEC req and adding STA node to the driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:57:33 +02:00
Jouni Malinen
8b9d0bfa00 Add mechanism for disabling radio for testing purposes
"wpa_cli set radio_disabled 1/0" can be used to disable/enable
radio to simulate out-of-radio-range condition in a testbed
device.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:26:44 +02:00
Shan Palanisamy
56c2588aa8 atheros: Reset frame filter on deinit
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:25:07 +02:00
Antonio Quartulli
e640888c5e IBSS RSN: Support authorization
In IBSS RSN cfg80211/mac80211 now waits for userspace to authorize new
stations. This patch makes wpa_supplicant notify the driver when a
station can be considered authorized.

Signed-hostap: Antonio Quartulli <ordex@autistici.org>
2012-02-12 21:12:22 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
e22d4d957b Remove the GPL notification from files contributed by Atheros
Remove the GPL notification text from files that were initially
contributed by Atheros Communications or Qualcomm Atheros.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Ben Greear
80e8a5eef1 Support HT capability overrides
This allows HT capabilities overrides on kernels that
support these features.

MCS Rates can be disabled to force to slower speeds when using HT.
Rates cannot be forced higher.

HT can be disabled, forcing an 802.11a/b/g/n station to act like
an 802.11a/b/g station.

HT40 can be disabled.

MAX A-MSDU can be disabled.
A-MPDU Factor and A-MPDU Density can be modified.

Please note that these are suggestions to the kernel. Only mac80211
drivers will work at all. The A-MPDU Factor can only be decreased and
the A-MPDU Density can only be increased currently.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 21:01:31 +02:00
Jouni Malinen
ad612c2ace nl80211: Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-29 19:53:34 +02:00
Yogesh Ashok Powar
3dd1d8906d nl80211: Subscribe management frames for WPA_IF_AP_BSS types
In multiple BSSes scenario for the drivers that do not use
monitor interface and do not implement AP SME, RX MGMT
frame subscription happens only for the default bss (first_bss).

Subscribe for RX MGMT frames for such BSSes.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2012-01-29 12:34:38 +02:00
Yogesh Ashok Powar
a7a6af4cba nl80211: Derive frequency for BSSes other than the first
Commit e4fb216769 moved frequency
storage from driver struct to bss struct and is assigned in
wpa_driver_nl80211_set_freq. As this wpa_driver_nl80211_set_freq is
triggered only on the first_bss, bss->freq for other BSSes is never
being set to the correct value. This sends MLME frames on frequency zero
(initialized value of freq) for BSSes other than the first.

To fix this derive frequency value from first_bss.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2012-01-29 12:34:32 +02:00
Nicolas Cavallari
913e3cf794 nl80211: Add IBSS BSSID fixing support
If a BSSID and fixed-bssid are requested, fix the BSSID, so
the driver does not attempt to merge.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
2012-01-28 11:35:32 +02:00
Nicolas Cavallari
9e2af29f9b Support fixing the BSSID in IBSS mode
When the "bssid=" option is set for an IBSS network and ap_scan = 2,
ask the driver to fix this BSSID, if possible.

Previously, any "bssid=" option were ignored in IBSS mode when ap_scan=2.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
2012-01-28 11:33:47 +02:00
Jouni Malinen
552310680c nl80211: Fix send_action on off-channel in P2P GO role
A P2P Action frame may need to be sent on another channel than the GO's
operating channel. This information was lost in
wpa_driver_nl80211_send_action() in the case the interface was in AP
mode. Pass the frequence and related parameters to send_mlme mechanism
to allow the correct frequence to be used with the send frame command in
AP (P2P GO) mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-01-26 17:44:11 +02:00
Deepthi Gowri
d8d6b32eec nl80211: P2P: Pass cookie parameter in send action frame
The cookie value needs to be fetched in GO mode, too, to be able to
indicate TX status callbacks with drivers that handle AP mode SME
functionality internally. This fixes issues with client discoverability
where TX status callback for GO Discoverability Request is needed to
trigger the GO to send Device Discoverability Response.
2012-01-23 20:12:06 +02:00
Jouni Malinen
6d92fa6e92 P2P: Allow Device ID to be specified for p2p_find command
dev_id=<P2P Device Addr> can now be specified as an argument to
p2p_find to request P2P find for a specific P2P device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-08 09:25:29 -08:00
Jouni Malinen
3d9975d5b0 Do not trigger fast reconnection on locally generated deauth/disassoc
The deauthentication and disassociation events from nl80211 were being
processed identically regardless of whether the frame was generated by
the local STA or the AP. This resulted in fast reconnection mechanism
getting triggered even in the case where the disconnection was detected
locally (e.g., due to beacon loss) while this was supposed to happen
only in the case where the AP is sending an explicit Deauthentication
or Disassociation frame with a specific reason code.

Fix this by adding a new deauth/disassoc event variable to indicate
whether the event was generated locally.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-01 18:55:58 +02:00
Jouni Malinen
ee9fc67ab7 nl80211: Mark Beacon event debug excessive
This can show up way too frequently in AP mode to make debug logs
readable at debug level.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-30 14:10:15 +02:00
Jouni Malinen
b9fd8ce804 nl80211: Fix NL80211_CMD_FRAME to not try offchannel without driver support
The offchanok parameter is hardcoded to one in number of paths and that
added NL80211_ATTR_OFFCHANNEL_TX_OK attribute to NL80211_CMD_FRAME
unconditional. cfg80211 rejects this with EINVAL if the driver does not
indicate support for offchannel TX. Fix this by not requesting
offchannel TX depending on driver capabilities. Remain-on-channel
operation was used for those cases anyway, so the additional attribute
was not really needed for these in the first place.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-29 14:15:31 +02:00
Jouni Malinen
0d891981db nl80211: Do not stop AP mode Probe Request reporting on Listen stop
When nl80211_setup_ap() has enabled Probe Request reporting, this must
not be disabled when P2P Listen state is stopped to avoid breaking AP
mode operations. This could happen, e.g., if a Probe Request frame was
received from a P2P device that the we are trying to invite to our group
(i.e., when operating in GO role). p2p_probe_req_rx() calls
p2p_invite_start() in this case and that ends up calling
p2p->cfg->stop_listen() which calls probe_req_report() driver op.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-27 20:32:29 +02:00
Jouni Malinen
a6cc0602dd nl80211: Fix mgmt RX for device SME in AP mode without monitor
Drivers that use device SME in AP mode may still need to be
subscribed for Action frame RX when monitor interface is not used.
This fixes number of P2P GO operations with ath6kl.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:15:07 +02:00
Jouni Malinen
536062f274 nl80211: Fix use_monitor driver capability for non-mac80211 drivers
Poll command may be enough for mac80211 to figure out whether monitor
interface is to be used, but this change did not take into account
non-mac80211 drivers that support AP mode without monitor interface.
For example, ath6kl needs to get use_monitor disabled.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:13:01 +02:00
Jouni Malinen
82554b100c nl80211: Show station flush failures in debug log
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:12:07 +02:00
Jouni Malinen
36488c054c nl80211: Add debug prints for mgmt RX subscription
This makes it easier to figure out which management frames has been
subscribed to for RX events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:10:59 +02:00
Jouni Malinen
b088cf82c9 Android: nl80211: Work around limited genl_ctrl_resolve()
Android ICS system/core/libnl_2 has very limited genl_ctrl_resolve()
implementation that cannot handle names other than nlctrl. Work
around that by implementing more complete genl_ctrl_resolve()
functionality within driver_nl80211.c for Android builds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:33:41 +02:00
Ben Greear
300ab0556c Allow linking with libnl-3 (libnl 3.2 and newer)
I needed this patch to compile against the latest
libnl code. I added this to my config file:

CONFIG_LIBNL32=y

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-12-18 21:12:05 +02:00
Jason Young
5d06163714 AP: Pass station's WMM configuration to driver wrappers
This updates a previous patch did more or less the same thing by
providing the qosinfo as a single variable to the driver wrappers.

Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:38:06 +02:00
Jouni Malinen
9e088e743d nl80211: Fix memory leaks on nla_put_failure error paths
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-17 12:27:11 +02:00
Jason Young
5883168ae0 nl80211: Fix memory leak on nla_put_failure error paths
Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:19:36 +02:00
Eliad Peller
774bfa62ce nl80211: Send uapsd_queues and max_sp values on STA addition
When a new station is added, send its configured WMM params.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:59:34 +02:00
Eliad Peller
5f32f79c6e AP: Add uapsd_queues and max_sp fields
Add uapsd_queues and max_sp fields to sta_info struct,
and pass them to the sta_add callback.

These values are determined by the WMM IE in the (Re)Association Request.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:55:14 +02:00
Eliad Peller
70619a5d8a AP: Consider U-APSD driver support
Check whether the driver advertises support for U-APSD
in AP mode, and evaluate wmm_uapsd only in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:45:53 +02:00
Jouni Malinen
a97bde0af4 Android: Fix PNO start function conversion
The wpa_hexdump_ascii() call did not get converted properly and this
was missed becaused of it getting defined out from the build. Anyway,
this better use the correct variable names should that debug print
ever be enabled for Android.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-15 01:06:02 +02:00
Jouni Malinen
aa543c0c33 nl80211: Fix CONFIG_TDLS=y build
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-12 16:32:07 +02:00
Jouni Malinen
671a50392d nl80211: Clean up info on netdev or nl80211 not found errors
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:51:55 +02:00
Arik Nemtsov
5ed3354617 nl80211: Send Probe Response template to the driver
Pass the raw Probe Response template to kernel via netlink using the
set_ap() driver callback. The data is sent as one of the Beacon
attributes.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
5b99e21a14 Set driver Probe Response template for AP mode offload
Configure a Probe Response template for drivers that support it. The
template is updated when the Beacon template is updated.

The Probe Response template is propagated to the driver via the set_ap()
callback.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
562c9d976e nl80211: Propagate Probe Response offload capabilities from kernel
Translate nl80211 flags to wpa_supplicant flags for Probe Response
offload support. The existence of the nl80211 PROBE_RESP_OFFLOAD_SUPPORT
attribute means Probe Response offload is supported. The value of the
attribute is a bitmap of supported protocols.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Johannes Berg
341eebee38 nl80211: Store own address in BSS
Storing the address in the BSS instead of the DRV struct makes it usable
for hostapd and thus gets rid of the linux_get_ifhwaddr() call when
receiving a spurious frame.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-10 11:56:31 +02:00
Jouni Malinen
c3f4278445 P2P: Add group ifname to P2P-PROV-DISC-* events
If Provision Discovery Request is sent for GO role (i.e., P2P Group ID
attribute is included), add the group interface name to the control
interface event on the GO. This makes it easier to figure out which
ctrl_iface needs to be used for wps_pbc/wps_pin command to authorize
the joining P2P client.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-06 21:57:17 +02:00
Jithu Jance
8c5f730983 P2P: Add optional "join" argument for p2p_prov_disc command
This can be used to request Provision Discovery Request to be sent
for the purpose of joining a running group, e.g., to request the GO
to display a PIN that we can then use with p2p_connect join command.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2011-12-06 21:28:02 +02:00
Jouni Malinen
481234cf1a nl80211: Remove unnecessary struct nl80211_handles wrapper
Since the nl_cache is not used anymore, there is no need for maintaining
the struct nl80211_handles wrapper for struct nl_handle. Clean this up
by using nl_handle directly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-06 19:47:59 +02:00
Johannes Berg
3088e4e52d nl80211: Listen to unexpected 4addr events
Monitor-less AP mode had lost the ability to do
4addr WDS, this adds it back.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:32:41 +02:00
Johannes Berg
d6c9aab8d2 nl80211: Use global event socket for multicast events
This is a rewrite of Ben Greear's patch, making the
nl80211 code use just a single multicast event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:30:43 +02:00
Johannes Berg
e32ad281ca nl80211: Register for Beacon frames in AP mode
When running AP mode, we need to receive beacons over overlapping BSSes
to handle protection. Use the new nl80211 command for this. As the
command works per wiphy (and we don't want to receive the Beacon frames
multiple times) add an abstraction that keeps track of per-wiphy data.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:39:57 +02:00
Johannes Berg
02bb32c393 nl80211: Subscribe to spurious class3 frame events
These events are necessary to send deauth frames to
stations sending spurious data frames. Subscribe to
them on the per-BSS event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:29:45 +02:00
Johannes Berg
a11241fa11 nl80211: Use nl80211 for mgmt TX/RX in AP mode
To achieve this, multiple things are needed:
 1) since hostapd needs to handle *all* action frames,
    make the normal registration only when in a non-AP
    mode, to be able to do this use the new socket
 2) store the frequency in each BSS to be able to give
    the right frequency to nl80211's mgmt-tx operation
 3) make TX status processing reject non-matched cookie
    only in non-AP mode

The whole thing depends on having station-poll support
in the kernel. That's currently a good indicator since
the kernel patches are added together.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:24:00 +02:00
Jouni Malinen
8c3ba0784e nl80211: Use driver event to indicate failure on authentication retry
When using authentication retry within driver_nl80211.c, a failure on the
second attempt has to be indicated with a driver event since the return
code from wpa_driver_nl80211_authenticate() is not actually delivered to
the core code in that case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 22:28:30 +02:00
Jouni Malinen
536fd62dba nl80211: Recover from auth req ENOENT with a scan
cfg80211 rejects NL80211_CMD_AUTHENTICATE with ENOENT if the BSS entry
for the target BSS is not available. This can happen if the cfg80211
entry has expired before wpa_supplicant entry (e.g., during a suspend).
To recover from this quickly, run a single channel scan to get the
cfg80211 entry back and then retry authentication command again. This
is handled within driver_nl80211.c to keep the core wpa_supplicant
implementation cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 21:53:56 +02:00
Johannes Berg
9f12614b8c nl80211: Do not encrypt IEEE 802.1X WEP EAPOL
Set the NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT flag for nl80211 to tell
drivers (mac80211) to not encrypt the EAPOL frames for WEP IEEE 802.1X.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:46:12 +02:00
Johannes Berg
cc7a48d1f4 nl80211: Allocate nl CB for BSS RX
In preparation for things that receive on a BSS-specific handle,
allocate a CB for it and hook it up to receive functions.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:14:53 +02:00
Johannes Berg
f06aedd92f nl80211: Rename process_event
The next patch will add process_bss_event, rename process_event to
process_drv_event to differentiate between them.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:10:44 +02:00
Johannes Berg
a4ae123c3f nl80211: Pass cb to eloop function
By passing the nl_cb as the context to the eloop function we can
(in the next patch) use the same eloop function for BSS events.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:07:54 +02:00
Johannes Berg
1afc986d84 nl80211: Use one CB for driver event RX
There's no need to clone the CB all the time
and then assign it, just use a constant one.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:00:11 +02:00
Johannes Berg
e4fb216769 nl80211: Store frequency in bss struct
Storing the frequency in the bss struct allows using it for frame
commands in AP mode and not relying on the driver struct as much, which
is good for hostapd mode.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:55:22 +02:00
Johannes Berg
3fd1cefb81 nl80211: Move AP SME setup to mode change
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:47:01 +02:00
Johannes Berg
32ab485503 nl80211: Use socket error queue for EAPOL TX status
This will allow getting TX status for EAPOL frames
sent as data frames if the driver supports it.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:32:23 +02:00
Jouni Malinen
aef85ba204 nl80211: Ignore interface up event if interface is down
The RTM_NEWLINK even can have IFF_UP flag even if the interface is
down. Do not generate EVENT_INTERFACE_ENABLED event based on such a
message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 13:18:57 +02:00
Jouni Malinen
3b1c7bfdc5 nl80211: Use binary hexdump for scan IEs instead of text
The IEs are binary data, so there is not much point in trying
to show them as ASCII data in debug prints.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:47:34 +02:00
Jouni Malinen
e5693c4775 Merge set_rate_sets() driver_ops into set_ap()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:16:03 +02:00
Jouni Malinen
5f17b3ee9f Remove unused parameters from set_rate_sets()
Only setting of the basic rate set was supported, so remove the
unused parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:57:13 +02:00
Jouni Malinen
d03e8d118c nl80211: Merge ap_isolate configuration into nl80211_set_bss()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:43:18 +02:00
Jouni Malinen
e53a0c7406 Fix a typo in a comment
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:38:51 +02:00
Dmitry Shmidt
216eede830 Android: nl80211: Add Android specific PNO configuration
This is based on the Android driver_cmd changes that are converted to
use the sched_scan/stop_sched_scan driver_ops for the case where the
driver does not support the new nl80211 commands.

Change-Id: Iaedc340f84650af422bd2ea57d2a8b0a9d4a5330
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-29 15:18:52 +02:00
Dmitry Shmidt
5eb429101a Android: wext: Add sched_scan functions for PNO
(jm: This is based on the Android change that used driver_cmd. The same
implementation is used for the actual driver interface, but the commands
are now accessed through sched_scan/stop_sched_scan driver_ops instead
of driver_cmd)
2011-11-29 15:18:45 +02:00
Dmitry Shmidt
06e356fe14 Android: wext: Add driver state events 2011-11-29 15:18:21 +02:00
Jouni Malinen
527a398866 wext: Define some new values if linux/wireless.h is too old
IW_ENCODE_ALG_PMK and IW_ENC_CAPA_4WAY_HANDSHAKE are not defined in the
Android tree, so add compatibility defines for these.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-25 23:56:15 +02:00
Jouni Malinen
fb67eec6f8 nl80211: Do not set sched_scan filter if driver does not support it
cfg80211 will reject the NL80211_CMD_START_SCHED_SCAN if too many
match sets are requested. To avoid being completely unable to start
any scheduled scans, skip setting these filters if the driver did
not advertise support for large enough number of match sets.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 17:46:00 +02:00
Jouni Malinen
29f338af26 nl80211: Implement set_p2p_powersave for legacy_ps changes
This adds initial implementation of set_p2p_powersave to allow legacy PS
mode to be configured. P2P PS parameters are not yet supported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 13:11:22 +02:00
Johannes Berg
88df0ef74f nl80211: Set offchannel-OK selectively
It's not really valid to send off-channel in all cases,
so pass whether it should be allowed or not and don't
set it in the AP case.

Also, to get the right ifindex for hostapd, pass a bss
pointer instead of the drv pointer.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:56:34 +02:00
Johannes Berg
221a59c9b6 nl80211: Move preq NL handle into BSS
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:48:49 +02:00
Jouni Malinen
ddc5327139 nl80211: Add no_ack support for NL80211_CMD_FRAME
This is needed to allow no-ACK operation with Probe Response frames
in P2P Listen state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-19 19:32:05 +02:00
Helmut Schaa
fab2533604 nl80211: Implement noack policy for send_mlme
Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:22:13 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Johannes Berg
397188521d nl80211: Support in-kernel station poll
If the kernel supports this, don't use manual null
data frame transmissions. This is one thing to get
rid of cooked monitor interfaces.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:23:46 +02:00
Johannes Berg
d12dab4c6f nl80211: Use non-receiving socket for EAPOL TX
The non-monitor TX currently uses a normal L2 abstraction
socket, but that will also receive frames we don't want,
so use a plain socket that isn't bound for RX. This might
be possible using the L2 abstraction, but we need a plain
socket later for getting TX status events here.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:00:53 +02:00
Johannes Berg
61cbe2ffd8 nl80211: Use device AP SME capability
This changes the auto-detection of whether or not the device contains
the AP SME away from monitor interface addition failing to the explicit
attribute in nl80211. Keep the old auto-detection for a little while so
that ath6kl isn't broken right away.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 13:42:49 +02:00
Jouni Malinen
7a5257bbc9 nl80211: Sync with wireless-testing.git linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-19 13:40:07 +02:00
Johannes Berg
dd840f793c AP: Add explicit EAPOL TX status event
The new event can be used when EAPOL TX status can't be reported as a
complete 802.11 frame but is instead reported as just the EAPOL data as
originally passed to hapd_send_eapol().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 13:00:30 +02:00
Jithu Jance
57ebba598d nl80211: Implement shared_freq
This patch implements shared_freq handler for driver_nl80211.c. If a
"p2p_group_add" happens after legacy STA association, then this patch
will help to start the GO on the same frequency. This is useful when
supplicant is started on multiple interface running over a singly "PHY"
and the station interface is not used for the P2P device operations.

For example, wpa_supplicant -iwlan0 ..  -N -iwlan1 ... and wlan0 is used
for station connection and wlan1 as the P2P device interface.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2011-11-19 11:23:49 +02:00
Ben Greear
3b7ea88047 nl80211: Make MLME failure messages unique
Without this, it is impossible to tell exactly which
MLME code returned the error.

Also, convert to wpa_dbg so that we get device names
in the messages.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-11-18 23:41:52 +02:00
Dan Williams
98ac6763ff nl80211: Fix UNSPEC signal quality reporting
r->level got assigned so it's clearly not INVALID; instead
r->qual should be invalid.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2011-11-18 23:23:45 +02:00
Johannes Berg
335d42b1a6 nl80211: Get rid of family/cache objects
All we really need is the family ID, and we can
get that with genl_ctrl_resolve() and then don't
need to worry about family/cache objects.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-16 16:42:49 +02:00
Jouni Malinen
545cfc4bf3 WEXT: Use linux/wireless.h instead of wireless_copy.h
WEXT is not really changing anymore and more or less all Linux
distros come with linux/wireless.h that is recent enough to
allow the driver wrappers to be build.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-15 20:03:00 +02:00
Jouni Malinen
a5c696adb4 nl80211: Verify that global driver pointer is not NULL
driver_nl80211.c assumes that global driver pointer is set, so better
make this more consistent.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 22:39:57 +02:00
Jouni Malinen
9d77a392c7 Use a pre-processor macro to simplify event_to_string()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 19:06:37 +02:00
Ben Greear
6c3771d7d5 Print human readable driver event names
This makes it easier to understand the event related logs.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-11-13 19:01:38 +02:00
Jouni Malinen
aea855d752 Move wpa_scan_results_free() into shared C file
Replace the inline helper function with a new C file that can be used
for common driver API related function.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 18:56:26 +02:00
Jouni Malinen
b6c8df695c Remove station functionality from hostap and madwifi driver wrappers
This has been obsoleted by the more generic Linux WEXT (driver_wext.c)
support. The hostap and madwifi driver wrappers can now be used only
with hostapd. The old station interface remains available in releases up
to 1.x.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 11:14:44 +02:00
Jouni Malinen
3962b65858 Remove unmaintained driver wrappers
The driver wrappers broadcom, iphone, osx, and ralink have not been
maintained for a while and it does not look like they will be in the
future either. As such, remove them from the development branch. The
previous versions will be included in older releases up to 1.x.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 10:57:46 +02:00
Jouni Malinen
39e7d718f6 ndis: Work around lack of C99 designated initializers in MSVC
Use a driver_ndis.c specific initialization function to fill in the
wpa_driver_ops information to make it easier to modify struct
wpa_driver_ops in the future. Being able to build driver_ndis.c
with MSVC was the only reason for having to maintain the same order
of function pointers in struct wpa_driver_ops and for having to
update driver_ndis.c for all changes in that structure.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-03 18:45:21 +02:00
Gary Morain
577db0aedd Prefer 5 GHz networks over 2.4 GHz networks
In scan.c, merge a channel's noise value into the scan results. When
comparing scan results, compute the signal-to-noise ratio and use it
when available. Prefer a 5 GHz network if its SNR is really big (> 30)
or if its SNR is relatively close to the other network's.
2011-10-30 21:08:21 +02:00
Jouni Malinen
b3af99d202 nl80211: Disable IEEE 802.11b rates only for P2P iftypes
Instead of hardcoding IEEE 802.11b rates to be disabled whenever
P2P support is built in and supported by the driver, do this only
when an interface is set to P2P mode (both when adding a new
interface and when changing the interface mode). This re-enables
use of IEEE 802.11b APs with CONFIG_P2P=y builds.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:46:58 +03:00