Commit graph

1398 commits

Author SHA1 Message Date
Jouni Malinen
abe025dd31 tests: Shorter TX/RX test frame support for hostapd
wpa_supplicant already included support for this, but hostapd
DATA_TEST_* commands did not yet have support for using a shorter test
frame. This is needed for MACsec testing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-03 20:27:44 +03:00
leiwei
a93b369c17 macsec: Support IEEE 802.1X(EAP)/PSK MACsec Key Agreement in hostapd
Signed-off-by: leiwei <leiwei@codeaurora.org>
2019-06-03 20:27:44 +03:00
leiwei
29c832d0ea macsec: Add configuration parameters for hostapd
Signed-off-by: leiwei <leiwei@codeaurora.org>
2019-06-03 20:27:44 +03:00
John Crispin
4f3f33804a HE: Make the basic NSS/MCS configurable
Add a config option to allow setting a custom Basic NSS/MCS set. As a
default we use single stream HE-MCS 0-7.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:45:04 +03:00
John Crispin
05b28306f5 HE: Add HE channel management configuration options
These are symmetric with the VHT ones.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:30:05 +03:00
Alona Solntseva
6b43264e79 hostapd_cli: Add update_beacon command
Add ability to use UPDATE_BEACON with hostapd_cli. The option has been
exposed in ctrl_iface already.

Signed-off-by: Alona Solntseva <alona.solntseva@tandemg.com>
Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
2019-05-25 16:17:44 +03:00
John Crispin
ad5224dd43 HE: Fix typo srp -> spr in hostapd configuration parameters
The initial commit used srp instead of spr for the spatial reuse
configuration prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-05 00:59:18 +03:00
Toke Høiland-Jørgensen
ef7217518b hostapd: Add airtime policy configuration support
This adds support to hostapd for configuring airtime policy settings for
stations as they connect to the access point. This is the userspace
component of the airtime policy enforcement system PoliFi described in
this paper: https://arxiv.org/abs/1902.03439

The Linux kernel part has been merged into mac80211 for the 5.1 dev
cycle.

The configuration mechanism has three modes: Static, dynamic and limit.
In static mode, weights can be set in the configuration file for
individual MAC addresses, which will be applied when the configured
stations connect.

In dynamic mode, weights are instead set per BSS, which will be scaled
by the number of active stations on that BSS, achieving the desired
aggregate weighing between the configured BSSes. Limit mode works like
dynamic mode, except that any BSS *not* marked as 'limited' is allowed
to exceed its configured share if a per-station fairness share would
assign more airtime to that BSS. See the paper for details on these
modes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 14:57:43 +03:00
Jouni Malinen
b1664c8e4f HE: Fix he_bss_color documentation
This field needs to be set to a value within 1-63 range, i.e., 0 is not
a valid value and does not indicate that BSS color is disabled. B7 of
the BSS Color octet is used to indicate that the BSS Color is
_temporarily_ disabled, but that is something that would happen
automatically based on detecting a collision in the used BSS colors and
not something that would be configured.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 00:12:53 +03:00
Jouni Malinen
2b84ca4dd9 Share common SAE and EAP-pwd functionality: suitable groups
Start sharing common SAE and EAP-pwd functionality by adding a new
source code file that can be included into both. This first step is
bringing in a shared function to check whether a group is suitable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-25 23:49:49 +03:00
John Crispin
2ec71488b5 HE: Add Spatial Reuse Parameter Set element to the Beacon frames
SPR allows us to detect OBSS overlaps and allows us to do adaptive CCA
thresholds. For this to work the AP needs to broadcast the element
first.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-04-25 12:15:36 +03:00
Jouni Malinen
e00f780e2b DPP2: hostapd as TCP Relay
The new hostapd configuration parameter dpp_controller can now be used
with the following subparameter values: ipaddr=<IP address>
pkhash=<hexdump>. This adds a new Controller into the configuration
(i.e., more than one can be configured) and all incoming DPP exchanges
that match the specified Controller public key hash are relayed to the
particular Controller.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Jouni Malinen
2ed2b52ff5 DPP: Add configuration structure to dpp_global_init()
This can be used to provide configurable parameter to the global DPP
context. This initial commit introduces the msg_ctx context pointer for
wpa_msg().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-21 21:35:32 +03:00
Jouni Malinen
6396282430 Preparations for v2.8 release
Update the version number for the build and also add the ChangeLog
entries for both hostapd and wpa_supplicant to describe main changes
between v2.7 and v2.8.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-21 10:10:22 +03:00
Jouni Malinen
2f68051395 Fix hostapd BSS_TM_REQ handling of bss_term parameter
The TSF field in BSS termination information was not cleared correctly.
It was supposed to be cleared to all zeros, but the memset call did not
point at offset 2; instead, it cleared it with 0x02 octets and also
cleared the subelement header with 0x02 octets while leaving two last
octets uninitialized.

Fixes: a30dff07fb ("Add BSS_TM_REQ command to send BSS Transition Management Request")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 21:11:46 +03:00
Brendan Jackman
bbed23aee6 hostapd: Reduce minimum beacon interval from 15 to 10 TUs
Very short beacon intervals can be useful for certain scenarios such
as minimising association time on PBSSs. Linux supports a minimum of
10[1] so let's reduce the minimum to match that.

[1] https://elixir.bootlin.com/linux/latest/ident/cfg80211_validate_beacon_int

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2019-04-06 17:05:09 +03:00
Jouni Malinen
87d8435cf9 DPP: Common configurator/bootstrapping data management
Merge the practically copy-pasted implementations in wpa_supplicant and
hostapd into a single shared implementation in dpp.c for managing
configurator and boostrapping information. This avoid unnecessary code
duplication and provides a convenient location for adding new global DPP
data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-24 17:29:45 +02:00
Jouni Malinen
c98617b48d DPP2: Make DPP version number support available over control interface
"GET_CAPABILITY dpp" can now be used to determine which version number
of DPP is supported in the build.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 00:31:09 +02:00
Jouni Malinen
ce7effd08f DPP2: Build configuration flags for DPP version 2 support
The new CONFIG_DPP2=y build option for hostapd and wpa_supplicant is
used to control whether new functionality defined after the DPP
specification v1.0 is included. All such functionality are considered
experimental and subject to change without notice and as such, not
suitable for production use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 12:00:09 +02:00
Jared Bents
841205a1ce OpenSSL: Add 'check_cert_subject' support for TLS server
This patch added 'check_cert_subject' support to match the value of
every field against the DN of the subject in the client certificate. If
the values do not match, the certificate verification will fail and will
reject the user.

This option allows hostapd to match every individual field in the right
order, also allow '*' character as a wildcard (e.g OU=Development*).

Note: hostapd will match string up to 'wildcard' against the DN of the
subject in the client certificate for every individual field.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-11 14:09:45 +02:00
Jouni Malinen
fc30f99b34 WPS: Allow AP SAE configuration to be added automatically for PSK
The new hostapd configuration parameter wps_cred_add_sae=1 can be used
to request hostapd to add SAE configuration whenever WPS is used to
configure the AP to use WPA2-PSK and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and PMF enabled for PSK
and required for SAE associations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:43 +02:00
Jouni Malinen
941bad5ef4 SAE: Enable only group 19 by default in AP mode
Change the AP mode default for SAE to enable only the group 19 instead
of enabling all ECC groups that are supported by the used crypto library
and the SAE implementations. The main reason for this is to avoid
enabling groups that are not as strong as the mandatory-to-support group
19 (i.e., groups 25 and 26). In addition, this disables heavier groups
by default.

In addition, add a warning about MODP groups 1, 2, 5, 22, 23, and 24
based on "MUST NOT" or "SHOULD NOT" categorization in RFC 8247. All the
MODP groups were already disabled by default and would have needed
explicit configuration to be allowed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-05 17:21:41 +02:00
Arnout Vandecappelle (Essensium/Mind)
8682f384ce hostapd: Add README-MULTI-AP
Document what hostapd and wpa_supplicant do for Multi-AP.

This is only included in hostapd, since a Multi-AP device is always an
access point so it should have hostapd.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 22:35:41 +02:00
Davina Lu
66819b07b5 hostapd: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the WPS Registrar offers a
different set of credentials (backhaul credentials instead of fronthaul
credentials) when the Multi-AP subelement is present in the WFA vendor
extension element of the WSC M1 message.

Add new configuration options to specify the backhaul credentials for
the hostapd internal registrar: multi_ap_backhaul_ssid,
multi_ap_backhaul_wpa_psk, multi_ap_backhaul_wpa_passphrase. These are
only relevant for a fronthaul SSID, i.e., where multi_ap is set to 2 or
3. When these options are set, pass the backhaul credentials instead of
the normal credentials when the Multi-AP subelement is present.

Ignore the Multi-AP subelement if the backhaul config options are not
set. Note that for an SSID which is fronthaul and backhaul at the same
time (i.e., multi_ap == 3), this results in the correct credentials
being sent anyway.

The security to be used for the backaul BSS is fixed to WPA2PSK. The
Multi-AP Specification only allows Open and WPA2PSK networks to be
configured. Although not stated explicitly, the backhaul link is
intended to be always encrypted, hence WPA2PSK.

To build the credentials, the credential-building code is essentially
copied and simplified. Indeed, the backhaul credentials are always
WPA2PSK and never use per-device PSK. All the options set for the
fronthaul BSS WPS are simply ignored.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Jouni Malinen
b0e91e3877 SAE: VLAN assignment based on SAE Password Identifier
The new sae_password parameter [|vlanid=<VLAN ID>] can now be used to
assign stations to a specific VLAN based on which SAE Password
Identifier they use. This is similar to the WPA2-Enterprise case where
the RADIUS server can assign stations to different VLANs and the
WPA2-Personal case where vlanid parameter in wpa_psk_file is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 17:24:23 +02:00
Hristo Venev
464064c7e5 hostapd: Document openssl_ecdh_curves configuration parameter
Signed-off-by: Hristo Venev <hristo@venev.name>
2019-02-17 14:01:57 +02:00
Jouni Malinen
dbfa691df4 VLAN assignment based on used WPA/WPA2 passphrase/PSK
Extend wpa_psk_file to allow an optional VLAN ID to be specified with
"vlanid=<VLAN ID>" prefix on the line. If VLAN ID is specified and the
particular wpa_psk_file entry is used for a station, that station is
bound to the specified VLAN. This can be used to operate a single
WPA2-Personal BSS with multiple VLANs based on the used passphrase/PSK.
This is similar to the WPA2-Enterprise case where the RADIUS server can
assign stations to different VLANs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
fe468b0714 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
When I replaced the POS() function with ffs() when applying relevant
parts from the original patch, this ended up breaking the frame
construction since the POS() function was supposed to count the bit
offset for the mask with 0 being the LSB instead of 1 returned by ffs().
Furthermore, ffs() is not available in all C libraries (e.g., not
directly exposed by strings.h on Android), so better not depend on that
or compiler builtins for this since there is no need for this to be as
fast as possible in configuration parsing.

Fix this with a simple function to determine the number of bits the
value needs to be shifted left to align with the mask.

Fixes: 11ce7a1bc3 ("HE: Add MU EDCA Parameter Set element (AP)")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-12 01:23:30 +02:00
Jared Bents
159a7fbdea crl_reload_interval: Add CRL reloading support
This patch adds a new flag 'crl_reload_interval' to reload CRL
periodically. This can be used to reload ca_cert file and the included
CRL information on every new TLS session if difference between the last
reload and the current time in seconds is greater than
crl_reload_interval.

This reloading is used for cases where check_crl is 1 or 2 and the CRL
is included in the ca_file.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
2019-01-27 18:45:07 +02:00
Michal Kazior
83c8608132 AP: Add wpa_psk_file reloading in runtime
The wpa_psk_file can now be modified and hostapd can be told to re-read
it with the control interface RELOAD_WPA_PSK command:

 $ hostapd_cli reload_wpa_psk

It must be noted special care must be taken if WPS is configured
(wps_state=2, eap_server=1) because WPS appends PMKs to the
wpa_psk_file.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-01-26 17:52:04 +02:00
Michal Kazior
ec5c39a557 AP: Allow identifying which passphrase station used with wpa_psk_file
It is now possible to optionally specify keyid for
each wpa_psk_file entry:

 keyid=something 00:00:00:00:00:00 secretpassphrase

When station connects and the passphrase it used
has an associated keyid it will be appended to the
AP-STA-CONNECTED event string:

 wlan0: AP-STA-CONNECTED 00:36:76:21:dc:7b keyid=something

It's also possible to retrieve it through the control interface:

 $ hostapd_cli all_sta
 Selected interface 'ap0'
 00:36:76:21:dc:7b
 ...
 keyid=something

New hostapd is able to read old wpa_psk_file. However, old hostapd will
not be able to read the new wpa_psk_file if it includes keyids.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-01-26 17:52:04 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
13a200a92a FILS: Remove notes about experimental implementation
The standard amendment has been published and there has been sufficient
amount of interoperability testing for FILS to expect the protocol not
to be changed anymore, so remove the notes claiming this to be
experimental and not suitable for production use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-22 13:33:48 +02:00
Ian Archer
9758b08bcf hostapd: Add support for setting pbss option from config file
There is currently no support for setting hostapd_bss_config.pbss from a
config file, i.e., it was used only based on automatic logic in
wpa_supplicant. This patch adds a key naturally called "pbss" which can
be used to set it.

Cc: Antony King <antony.king@bluwirelesstechnology.com>
Signed-off-by: Brendan Jackman <brendan.jackman@bluwirelesstechnology.com>
2019-01-21 12:35:59 +02:00
Siva Mullati
11ce7a1bc3 HE: Add MU EDCA Parameter Set element (AP)
Add support for configuring parameters for the MU EDCA Parameter Set
element per IEEE P802.11ax/D3.0.

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
2019-01-08 17:22:43 +02:00
Jouni Malinen
02f52ab6f5 Use lchown() instead of chown() for self-created files
There is no need to allow symlink dereferencing in these cases where a
file (including directories and sockets) are created by the same
process, so use the safer lchown() variant to avoid leaving potential
windows for something external to replace the file before the chown()
call. The particular locations used here should not have write
permissions enabled for processes with less privileges, so this may not
be needed, but anyway, it is better to make these more restrictive
should there be cases where directory permissions are not as expected
for a good deployment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 20:28:04 +02:00
Jouni Malinen
cc9c4feccc OpenSSL: Allow systemwide policies to be overridden
Some distributions (e.g., Debian) have started introducting systemwide
OpenSSL policies to disable older protocol versions and ciphers
throughout all programs using OpenSSL. This can result in significant
number of interoperability issues with deployed EAP implementations.

Allow explicit wpa_supplicant (EAP peer) and hostapd (EAP server)
parameters to be used to request systemwide policies to be overridden if
older versions are needed to be able to interoperate with devices that
cannot be updated to support the newer protocol versions or keys. The
default behavior is not changed here, i.e., the systemwide policies will
be followed if no explicit override configuration is used. The overrides
should be used only if really needed since they can result in reduced
security.

In wpa_supplicant, tls_disable_tlsv1_?=0 value in the phase1 network
profile parameter can be used to explicitly enable TLS versions that are
disabled in the systemwide configuration. For example,
phase1="tls_disable_tlsv1_0=0 tls_disable_tlsv1_1=0" would request TLS
v1.0 and TLS v1.1 to be enabled even if the systemwide policy enforces
TLS v1.2 as the minimum version. Similarly, openssl_ciphers parameter
can be used to override systemwide policy, e.g., with
openssl_ciphers="DEFAULT@SECLEVEL=1" to drop from security level 2 to 1
in Debian to allow shorter keys to be used.

In hostapd, tls_flags parameter can be used to configure similar
options. E.g., tls_flags=[ENABLE-TLSv1.0][ENABLE-TLSv1.1]

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 17:14:26 +02:00
Nils Nieuwejaar
ba4f3224ae Allow remote RADIUS authentication with local VLAN management
The documentation in the hostapd.conf file says that the dynamic_vlan
variable is used to control whether VLAN assignments are accepted from a
RADIUS server. The implication seems to be that a static VLAN assignment
will come from the accept_mac_file if dynamic_vlan is set to 0, and a
dynamic assignment will come from the RADIUS server if dynamic_vlan is
set to 1. Instead, I'm seeing that the static settings from the
accept_mac_file are ignored if dynamic_vlan is set to 0, but used if
dynamic_vlan is set to 1. If dynamic_vlan is set to 1 and the RADIUS
server does not provide a VLAN, then the accept_mac_file assignment is
overridden and the STA is assigned to the default non-VLANed interface.

If my understanding of the expected behavior is correct, then I believe
the problem is in ap_sta_set_vlan(). That routine checks the
dynamic_vlan setting, but has no way of determining whether the incoming
vlan_desc is static (i.e., from accept_mac_file) or dynamic (i.e., from
a RADIUS server).

I've attached a patch that gets hostapd working as I believe it's meant
to, and updates the documentation to make the implicit behavior
explicit.

The functional changes are:

- hostapd_allowed_address() will always extract the vlan_id from the
  accept_macs file. It will not update the vlan_id from the RADIUS cache
  if dynamic_vlan is DISABLED.

- hostapd_acl_recv_radius() will not update the cached vlan_id if
  dynamic_vlan is DISABLED.

- ieee802_1x_receive_auth() will not update the vlan_id if dynamic_vlan
  is DISABLED.

More cosmetic:

Most of the delta is just moving code out of ieee802_1x_receive_auth()
into a new ieee802_1x_update_vlan() routine. While I initially did this
because the new DISABLED check introduced excessive indentation, it has
the added advantage of eliminating the vlan_description allocation and
os_memset() call for all DYNAMIC_VLAN_DISABLED configs.

I've done a couple rounds of review offline with Michael Braun (who has
done much of the work in this part of the code) and incorporated his
feedback.

If dynamic_vlan=0 (disabled), vlan assignments will be managed using the
local accept_mac_file ACL file, even if a RADIUS server is being used
for user authentication. This allows us to manage users and devices
independently.

Signed-off-by: Nils Nieuwejaar <nils.nieuwejaar@gmail.com>
2019-01-02 23:27:49 +02:00
Avraham Stern
d6e7d4dede hostapd_cli: Add option to send beacon report request
This new 'req_beacon' command is useful for testing.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 16:26:11 +02:00
Lubomir Rintel
89a7cdd690 crypto: Add option to use getrandom()
According to random(4) manual, /dev/random is essentially deprecated on
Linux for quite some time:

"The /dev/random interface is considered a legacy interface, and
/dev/urandom is preferred and sufficient in all use cases, with the
exception of applications which require randomness during early boot
time; for these applications, getrandom(2) must be used instead, because
it will block until the entropy pool is initialized."

An attempt to use it would cause unnecessary blocking on machines
without a good hwrng even when it shouldn't be needed. Since Linux 3.17,
a getrandom(2) call is available that will block only until the
randomness pool has been seeded.

It is probably not a good default yet as it requires a fairly recent
kernel and glibc (3.17 and 2.25 respectively).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-01-02 01:24:18 +02:00
Jouni Malinen
cc58a35735 Update copyright notices for the new year 2019
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 23:38:56 +02:00
Beni Lev
076f1ea1d9 OCE: Add RSSI based association rejection support (AP)
An AP might reject a STA association request due to low RSSI. In such
case, the AP informs the STA the desired RSSI improvement and a retry
timeout. The STA might retry to associate even if the RSSI hasn't
improved if the retry timeout expired.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2019-01-01 18:18:50 +02:00
Sam Voss
dd5d325b0a hostapd: Add configuration option check_crl_strict
Add the ability to ignore time-based CRL errors from OpenSSL by
specifying a new configuration parameter, check_crl_strict=0.

This causes the following:

- This setting does nothing when CRL checking is not enabled.

- When CRL is enabled, "strict mode" will cause CRL time errors to not
  be ignored and will continue behaving as it currently does.

- When CRL is enabled, disabling strict mode will cause CRL time
  errors to be ignored and will allow connections.

By default, check_crl_strict is set to 1, or strict mode, to keep
current functionality.

Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
2018-12-31 12:51:51 +02:00
Hristo Venev
d01203cafc hostapd: Add openssl_ecdh_curves configuration parameter
This makes it possible to use ECDSA certificates with EAP-TLS/TTLS/etc.
It should be noted that when using Suite B, different mechanism is used
to specify the allowed ECDH curves and this new parameter must not be
used in such cases.

Signed-off-by: Hristo Venev <hristo@venev.name>
2018-12-30 17:27:34 +02:00
Felix Fietkau
4d663233e6 hostapd: Support for overriding the bridge name per VLAN via vlan_file
This makes it easier to integrate dynamic VLANs in custom network
configurations. The bridge name is added after the interface name in the
vlan_file line, also separated by whitespace.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-21 12:02:57 +02:00
Prasad, Jagadeesh (Contractor)
d2b5138116 DPP: Add self configuration command in hostapd_cli and wpa_cli
The back-end support for DPP self configuration was already present in
hostapd and wpa_supplicant. However, the command to invoke DPP self
configuration was not available in hostapd_cli and wpa_cli. Add the
command "dpp_configurator_sign" in them.

Signed-off-by: Prasad, Jagadeesh <Jagadeesh_Prasad@comcast.com>
2018-12-21 12:02:57 +02:00
Jouni Malinen
53d5de6f1d DPP: Accept DPP_CONFIGURATION_SIGN without double space before parameters
Make this command more convenient to use by not requiring two space
characters between the command and the first parameter.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 12:02:57 +02:00
Venkateswara Naralasetty
9c06f0f6ae hostapd: Add Multi-AP protocol support
The purpose of Multi-AP specification is to enable inter-operability
across Wi-Fi access points (APs) from different vendors.

This patch introduces one new configuration parameter 'multi_ap' to
enable Multi-AP functionality and to configure the BSS as a backhaul
and/or fronthaul BSS.

Advertise vendor specific Multi-AP capabilities in (Re)Association
Response frame, if Multi-AP functionality is enabled through the
configuration parameter.

A backhaul AP must support receiving both 3addr and 4addr frames from a
backhaul STA, so create a VLAN for it just like is done for WDS, i.e.,
by calling hostapd_set_wds_sta(). Since Multi-AP requires WPA2 (never
WEP), we can safely call hostapd_set_wds_encryption() as well and we can
reuse the entire WDS condition.

To parse the Multi-AP Extension subelement, we use get_ie(): even though
that function is meant for parsing IEs, it works for subelements.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 01:04:14 +02:00
Mathy Vanhoef
6ab73efa72 OCV: Add utility functions to insert OCI elements
This commit adds utility functions to insert various encoding of the OCI
element.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00