Commit graph

13311 commits

Author SHA1 Message Date
Avraham Stern
b8e88d357a wpa_supplicant: Handle port authorized event
When the driver indicates that the connection is authorized (i.e., the
4-way handshake was completed by the driver), cancel the EAP
authentication timeout and set the EAP state machine to success state.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:45:26 +02:00
Avraham Stern
a8c45d47d3 nl80211: Handle port authorized event
Indicate that the connection is authorized when receiving a port
authorized event from the driver.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:44:08 +02:00
Avraham Stern
0a20bd7d91 driver: Add port authorized event
Add an event that indicates that the 4 way handshake was completed by
the driver.

This event is useful for networks that require 802.1X authentication.
The driver can use this event that a new connection is already
authorized (e.g. when the driver used PMKSA caching) and 802.1X
authentication is not required.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:39:41 +02:00
Avraham Stern
05fc7c68f6 nl80211: Add API to set the PMK to the driver
Add support for setting the PMK to the driver. This is used for
drivers that support 4-way handshake offload.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:36:16 +02:00
Eliad Peller
0ff08f9636 nl80211: Check 4-way handshake offload support
Set the WPA_DRIVER_FLAGS_4WAY_HANDSHAKE flag if the driver indicates
both 4-way handshake PSK and 802.1X support. Currently wpa_supplicant
doesn't distinguish between 4-way handshake for 802.1X and PSK, but
nl80211 API has different capabilities for each one.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-02-17 18:31:05 +02:00
Eliad Peller
730c5a1d09 nl80211: Support passing PSK on connect
If the driver advertises WPA_DRIVER_FLAGS_4WAY_HANDSHAKE support, pass
the PSK on connect.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2018-02-17 18:31:05 +02:00
Vasyl Vavrychuk
2494bcef24 tests: Add option --dbus for logging D-Bus messages
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-02-17 18:21:47 +02:00
Vasyl Vavrychuk
2e4707a0a7 tests: Document building of hostapd_cli for hwsim builds
This is used in the tests, too, and was already covered by the build.sh
script, but not this README file.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-02-17 18:15:31 +02:00
Arkadiusz Drabczyk
14dcb22a5b wpa_passphrase: Include $(LIBS) for linking
wpa_passphrase requires libcrypto from OpenSSL (or another selected
library). User can set an alternative path to OpenSSL libraries by
defining LIBS at the top of .config but if $(LIBS) is not actually used
wrong libcrypto is used or compilation fails if there is no libcrypto in
the default locations cc is looking for it. It's especially bad for
cross-compilers that fail with 'cannot find -lcrypto' message.

Signed-off-by: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
2018-02-17 18:11:40 +02:00
Jouni Malinen
4b07484c3d DPP: Do not include common/dpp.h without CONFIG_DPP=y
This header file pulls in an OpenSSL header file and as such, should not
be included without CONFIG_DPP=y to avoid bringing in an unnecessary
build dependency on OpenSSL header files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 18:07:43 +02:00
Jouni Malinen
9ec0dfa31f Define host_to_le64() for Windows builds
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 18:04:54 +02:00
Jouni Malinen
6e3726c09e Fix a typo in disassoc_low_ack documentation
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:59:27 +02:00
Jouni Malinen
57dc90e386 tests: wpa_supplicant AP mode - open network with client isolation
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:57:45 +02:00
Danilo Ravotto
19e20c14fb Add ap_isolate configuration option for wpa_supplicant AP mode
Allow client isolation to be configured with ap_isolate inside
wpa_supplicant configuration file.

Signed-off-by: Danilo Ravotto <danilo.ravotto@zirak.it>
2018-02-17 17:48:31 +02:00
Jouni Malinen
e51e49fccc tests: Fix dbus_set_global_properties failure if run twice
Clear the model_name parameter back to the default (empty string) at the
beginning and the end of dbus_set_global_properties to avoid failures if
the test case is run multiple times.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:41:57 +02:00
Jouni Malinen
50d7cdedae tests: Make dbus_p2p_discovery more robust
Ignore any unexpected deviceLost event before the peer devices has been
discovered. This works around issues where the previous test case
terminates before the D-Bus events have been fully delivered. This could
happen, e.g., when running dbus_p2p_discovery twice in a row.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:21:05 +02:00
Vamsi Krishna
a4016163e8 Extend APF interface for read/write and enable/disable ops
Enhance QCA vendor specific APF interface to support write/read program
and/or data and to enable/disable APF feature.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-15 00:26:06 +02:00
Jouni Malinen
b2e4074ca3 OpenSSL: Fix EAP-FAST with OpenSSL 1.1.1-pre1
TLS v1.3 needs to be explicitly disabled to allow cipher suite selection
for EAP-FAST to work with OpenSSL builds that include TLS v1.3 support.
Without this, OpenSSL refuses to generate ClientHello due to the cipher
suite list including only ciphers allowed with older versions than TLS
v1.3.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-14 12:40:33 +02:00
Jouni Malinen
a8ec0b8ccc tests: sigma_dut controlled STA as DPP PKEX responder and error case
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-13 00:24:50 +02:00
Ashok Ponnaiah
a22e235fd0 OWE: Add testing RSNE for OWE assoc response with driver SME/MLME
Allow RSNE to be overwritten for testing purposes also in the
driver-based SME/MLME case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-12 21:31:04 +02:00
Jouni Malinen
aca4d84e3d DPP: Use wildcard BSSID in GAS query frames
Force use of the wildcard BSSID address in GAS query frames with DPP
regardless of how the gas_address3 configuration parameter is set. DPP
specification mandates this and the use of GAS here is really outside
the context of a BSS, so using the wildcard BSSID makes sense even for
the corner case of Configurator running on a known AP (where IEEE 802.11
standard would allow the BSSID of the AP to be used).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:42:00 +02:00
Jouni Malinen
0887215d94 nl80211: Do not try to add too large NL80211_ATTR_PMK for set/del PMKSA
The current cfg80211 limit for the maximum NL80211_ATTR_PMK length is
48, so anything larger than that will result in the operation completely
failing. Since the PMKSA entries can be used without the PMK for most
purposes (the main use case for PMK currently is offloaded FILS
authentication), try to go ahead by configuring only the PMKID for the
case where 64-octet PMK is needed (which is currently limited to only
DPP with NIST P-521 and brainpoolP512r1 curves). This can fix DPP
connections with drivers that expect to get the PMKID through this
interface while still leaving the actual 4-way handshake for user space.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:16:53 +02:00
Jouni Malinen
e7f6e6ee1b nl80211: Print NL80211_CMD_{SET,DEL}_PMKSA failures in debug log
This makes it easier to notice if the driver operation to manage PMKSA
cache information fails unexpectedly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:10:07 +02:00
Purushottam Kushwaha
717f236dce wpadebug: Add support for QR Code scanning and display via zxing
Enhance wpadebug application to support scanning and displaying of QR
codes. This depends on a third-party source: zxing
(https://github.com/zxing/zxing).

Shell command to launch scanner/viewer via wpadebug is:
>adb root
>adb shell

Scanner:
>am start -n w1.fi.wpadebug/w1.fi.wpadebug.QrCodeScannerActivity
Viewer:
>am start -n w1.fi.wpadebug/w1.fi.wpadebug.QrCodeDisplayActivity

QR code string input/output file would be generated in
'/sdcard/wpadebug_qrdata.txt' in the device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-08 18:39:41 +02:00
Jouni Malinen
8f7a50a63e tests: MAC ACL accept/deny management
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 19:45:32 +02:00
Tamizh chelvam
3988046de5 hostapd: Dynamic MAC ACL management over control interface
Previously, MAC ACL could be modified only through file operations
(modify accept/deny_mac_file and reload it to hostapd). Extend this to
allow MAC ACL to be modified and displayed through new control interface
commands:

ACCEPT_ACL <subcmd> [argument]
DENY_ACL <subcmd> [argument]

subcmd: ADD_MAC <addr>[ VLAN_ID=<id>]|DEL_MAC <addr>|SHOW|CLEAR

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
2018-02-07 19:45:21 +02:00
Jouni Malinen
6a252ece24 DPP: Fix GAS query removal race condition on DPP_STOP_LISTEN
If a DPP_STOP_LISTEN call happens to be received when there is a pending
gas-query radio work that has not yet been started, it was possible for
gas_query_stop() to go through gas_query_done() processing with
gas->work == NULL and that ended up with the pending GAS query getting
freed without removing the pending radio work that hold a reference to
the now freed memory. Fix this by removing the pending non-started radio
work for the GAS query in this specific corner case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 18:03:58 +02:00
Jouni Malinen
27a8d93b07 tests: Make dpp_qr_code_curve_select more robust
Wait for the configuration exchange to complete before issuing the
DPP_STOP_LISTEN command to avoid confusing sequence of operation between
the ongoing and immediately following DPP exchanges.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 17:09:20 +02:00
Jouni Malinen
4370ffc0c4 tests: DPP and PKEX on 5 GHz
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 16:58:52 +02:00
Jouni Malinen
3b50f8a460 DPP: PKEX initiation on other bands
Add support for wpa_supplicant to try to initiate PKEX on 5 GHz and 60
GHz bands in addition to the previously available 2.4 GHz case. If no
response from a peer device is seen on the 2.4 GHz band (channel 6) for
the five attempts, try the other PKEX channels (5 GHz channels 44 and
149; and 60 GHz channel 2) if they are supported and allowed for
initiating radiation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 16:56:43 +02:00
Jouni Malinen
fc031b7ea7 tests: Make owe_transition_mode_multi_bss more robust
Fix bssid2 value to make scanning more reliable for the second OWE BSS.
In addition, reorder the STA status checks to happen before the data
connectivity check to get more accurate failure reason into the log if
the test case fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-07 13:45:48 +02:00
Jouni Malinen
659ac96d7f ieee802_11_mgmt: Handle frame info more consistently
Check for the fi parameter to be non-NULL before trying to fetch the
ssi_signal information similarly to how the fi->freq was already
handled. While the meta information is supposed to be available, it
looks like there is at least one corner case where fi == NULL could be
used (Authentication frame reprocessing after RADIUS-based ACL).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-07 12:34:41 +02:00
Ashok Ponnaiah
458d8984de SAE: Reject request with mismatching PMKID (no PMKSA cache entry)
Reject SAE association request when PMKID is included in the RSNE, but
the corresponding PMKSA is not available in the AP.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-07 12:24:36 +02:00
Kiran Kumar Lokere
5ac4346426 Define new QCA vendor sub command for wifi test configuration
Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 12:11:47 +02:00
Jouni Malinen
e129e6bd27 tests: sigma_dut DPP roles incompatible
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
70e1901371 DPP: Require use of PMF for DPP AKM
Previously, wpa_supplicant set PMF as optional for the DPP AKM since
there was no clear statement about this requirement in the tech spec.
Now that this requirement has been added, update the implementation to
match. In addition, set ssid->ieee80211w using the actual enum
mfp_options values instead of magic constants to make this a bit more
readable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
3e3d634fa7 tests: Enable PMF in sigma_dut DPP tests
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
2fec710ac5 tests: Use PMF in DPP with legacy PSK/SAE cases
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 20:52:44 +02:00
Ashok Ponnaiah
79ce2d519b OWE: Rename function to match use (driver-SME/MLME)
This function is used to process a (Re)Association Request frame, so
rename it appropriately to mention assoc_req instead of auth_req.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:27:41 +02:00
Ashok Ponnaiah
759da93a89 OWE: Check for ECDH availability before use (driver-SME/MLME)
Verify that the STA has ECDH data available before trying to use this
data to add the OWE DH Params element.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:25:41 +02:00
Ashok Ponnaiah
af65ef28f4 OWE: Add RSNE when not using PMKSA caching (driver-SME/MLME)
RSNE needs to be added both with and without use of PMKSA caching.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:22:53 +02:00
Ashok Ponnaiah
5850cba384 OWE: Support DH groups 20 and 21 with driver-SME/MLME
This was already the case with the hostapd-based SME/MLME
implementation, but the OWE DH Param element construction for the
driver-based SME/MLME needed a matching change to set the group
properly.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:20:22 +02:00
Jouni Malinen
05e5c0e554 tests: Run owe test with PMF required
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 18:55:18 +02:00
Jouni Malinen
0dc3c5f2ee tests: WPA2-PSK-FT AP with PSK from a file
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 12:40:03 +02:00
Michal Kazior
f9854c183d hostapd: Fix wpa_psk_file support for FT-PSK
For FT-PSK sm->xxkey was populated with only the first password on the
linked list (i.e., last matching password in the wpa_psk_file) in
INITPSK. This caused only that password to be recognized and accepted.
All other passwords were not verified properly and subsequently
prevented clients from connecting.

Hostapd would report:

 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: received EAPOL-Key frame (2/4 Pairwise)
 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: invalid MIC in msg 2/4 of 4-Way Handshake
 Jan 30 12:55:45 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout

Signed-off-by: Michal Kazior <michal@plumewifi.com>
2018-02-04 12:39:23 +02:00
Jouni Malinen
3bd35b6816 wpa_supplicant: Fix parsing errors on additional config file
If the -I<config> argument is used and the referenced configuration file
cannot be parsed, wpa_config_read() ended up freeing the main
configuration data structure and that resulted in use of freed memory in
such an error case. Fix this by not freeing the main config data and
handling the error case in the caller.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 12:20:13 +02:00
Dmitry Shmidt
9c5fe742a2 wpa_supplicant: Free config only if it was allocated in same call
If option -I:config points to a non-existing file, the the previously
allocated config must not be freed. Avoid use of freed memory in such an
error case by skipping the incorrect freeing operation.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2018-02-04 12:13:12 +02:00
Adiel Aloni
946ed13c98 tests: Enable device PS before sending PS-Poll
Linux kernel commit c9491367b759 ("mac80211: always update the PM state
of a peer on MGMT / DATA frames") enforces the AP to check only
mgmt/data frames PM bit, and to update station's power save accordingly.
When sending only a PS-Poll (control frame) the AP will ignore the PM
bit. As the result, the partial virtual bitmap will not be updated, and
the test ap_open_disconnect_in_ps will fail on tshark check. Since the
test needs only the TIM to be updated, setting PS enabled will send NDP
that will signal that the station is sleeping. Sending PS-Poll to enable
power save is not correct, according to the following standard
statement: "A PS-Poll frame exchange does not necessarily result in an
Ack frame from the AP, so a non-AP STA cannot change power management
mode using a PS-Poll frame."

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
2018-02-04 12:06:11 +02:00
Jouni Malinen
9f8d459d4c OWE: Fix association IEs for transition mode open AP connection
The special case of returning from wpa_supplicant_set_suites() when OWE
transition mode profile is used for an open association did not clear
the wpa_ie buffer length properly. This resulted in trying to use
corrupted IEs in the association request and failed association
(cfg80211 rejects the request or if the request were to go out, the AP
would likely reject it).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 11:55:01 +02:00
Simon Dinkin
c6096c6eef wpa_cli: Enable add/remove/get vendor elements without P2P
This functionality can be used regardless of P2P and should not be under
the ifdef of CONFIG_P2P.

Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-02-03 12:44:20 +02:00