Commit graph

2691 commits

Author SHA1 Message Date
Jouni Malinen
74df9ecd4a P2P NFC: Do not try to join peer if both devices are already GO
Send a P2P-NFC-BOTH-GO event to upper layers to determine what to
do in case both devices going through NFC connection handover are
already operating as a GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
201b0f5fa6 P2P: Add test option to disable IP address assignment request
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
25ef8529c1 P2P: Add support for IP address assignment in 4-way handshake
This new mechanism allows P2P Client to request an IPv4 address from the
GO as part of the 4-way handshake to avoid use of DHCP exchange after
4-way handshake. If the new mechanism is used, the assigned IP address
is shown in the P2P-GROUP-STARTED event on the client side with
following new parameters: ip_addr, ip_mask, go_ip_addr. The assigned IP
address is included in the AP-STA-CONNECTED event on the GO side as a
new ip_addr parameter. The IP address is valid for the duration of the
association.

The IP address pool for this new mechanism is configured as global
wpa_supplicant configuration file parameters ip_addr_go, ip_addr_mask,
ip_addr_star, ip_addr_end. For example:

ip_addr_go=192.168.42.1
ip_addr_mask=255.255.255.0
ip_addr_start=192.168.42.2
ip_addr_end=192.168.42.100

DHCP mechanism is expected to be enabled at the same time to support P2P
Devices that do not use the new mechanism. The easiest way of managing
the IP addresses is by splitting the IP address range into two parts and
assign a separate range for wpa_supplicant and DHCP server.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:26 +02:00
Jouni Malinen
c4f87a701b P2P NFC: Add NFC tag enabling for static handover
The device with the NFC Tag can be configured to enable NFC to be used
with "P2P_SET nfc_tag 1" and "P2P_LISTEN" commands to allow static
handover to be used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
dd37a93884 P2P NFC: Report handover select from tag for static handover
WPS_NFC_TAG_READ can be used to report static connection handover where
the connection handover select message was read from an NFC tag.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
db6ae69e6b P2P NFC: Report connection handover as trigger for P2P
"NFC_REPORT_HANDOVER {INIT,RESP} P2P <req> <sel>" can now be used to
report completed NFC negotiated connection handover in which the P2P
alternative carrier was selected.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
9358878055 P2P NFC: Build connection handover messages
"NFC_GET_HANDOVER_{REQ,SEL} NDEF P2P-CR" can now be used to build P2P
alternative carrier record for NFC connection handover request/select
messages.

Static connection handover case can be enabled by configuring the DH
parameters (either with wps_nfc_* configuration parameters or with
WPS_NFC_TOKEN command at run time. The NFC Tag contents can be generated
with "NFC_GET_HANDOVER_SEL NDEF P2P-CR-TAG" after having configured
Listen channel (p2p_listen_reg_class/p2p_listen_channel).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
ab9e34426f P2P NFC: Pass OOB Device Password ID to P2P
GO Negotiation needs to know which OOB Device Password ID is assigned
for the peer when NFC is used as the trigger.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
50d1f8901c NFC: Update WPS ER to use the new connection handover design
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
d95079361b WPS NFC: Add support for wpa_supplicant AP/GO mode to use handover
New functionality is needed for this with the update NFC connection
handover design that depends on the AP side using the public key hash
from the handover request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
fa4c2988ae WPS NFC: Process new style handover select
The new WPS connection handover select includes Registrar public key
hash instead of credential. Use the new information to start
abbreviated WPS handshake instead of configuring a new network directly
from the old Credential-from-NFC design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
41f9ffb635 WPS NFC: Build new style carrier record for connection handover request
It is more useful to be able to build a single NFC carrier record
instead of the full connection handover request message to allow
external components to decide whether to negotiate which alternative
carrier is used. This updates the carrier record contents to the new
design to include Enrollee public key hash and provides this as a
carrier record instead of full message. An external program is expected
to be used to build the full NFC connection handover message with
potentially other alternative carrier records included.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
57630e658b WPS: Preparations for allowing SSID filtering for provisioning step
If the SSID of the WPS AP is known, it should be possible to limit AP
selection based on this when searching for an active WPS AP. This commit
adds a mechanism to specify SSID for this type of uses.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
5f4545573f WPS NFC: Validate peer public key hash on Enrollee
Since the Enrollee can now get the public key hash from the Registrar,
there is need to validate this during the WPS protocol run.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
ea43ad960b P2P: Make group operating channel available
Provide local GO channel to the P2P module so that it can be used in
messages that indicate the current operating channel.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Arif Hussain
253f2e3795 P2P: Apply unsafe frequency rules to available channels
This adds a QCA vendor specific nl80211 event to allow the driver to
indicate a list of frequency ranges that should be avoided due to
interference or possible known co-existance constraints. Such
frequencies are marked as not allowed for P2P use to force groups to be
formed on different channels.

If a P2P GO is operating on a channel that the driver recommended not to
use, a notification about this is sent on the control interface and
upper layer code may decide to tear down the group and optionally
restart it on another channel. As a TODO item, this could also be changed
to use CSA to avoid removing the group.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 11:49:05 +02:00
Jouni Malinen
8615bdfac9 Increase global ctrl_iface buffer to same size as per-interface
Since the global ctrl_iface can be used with IFNAME= prefix to send
commands to be processed by per-interface code, it should have the same
(well, close to same since the prefix takes some space) limits on
command length as the per-interface ctrl_iface. Increase the buffer from
256 to 4096 to achieve this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 16:57:15 +02:00
Jouni Malinen
c5a64e2d51 GAS client: Use Protected Dual of Public Action frames with PMF
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Conver Public Action
GAS queries to use Dual of Public Action frame if PMF has been
negotiated with the AP to which the frame is being sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:50:28 +02:00
Jouni Malinen
5ce00d09c0 GAS server: Add support for Protected Dual of Public Action frames
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Add support for this
different category of Action frames being used for GAS. The payload
after the Category field is identical, so the only change is in using
the Category field based on what was received in the request frames. For
backwards compatibility, do not enforce protected dual to be used on the
AP side, i.e., follow what the station does.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:19:55 +02:00
Jouni Malinen
ea6e040c30 Clear more configuration parameters to default on FLUSH
This makes it more convenient for test scripts to change parameters for
a specific test case without having to separately clear them between
each test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 10:21:49 +02:00
Raja Mani
cf70d2981d wpa_supplicant: Schedule PNO on completion of ongoing sched_scan
When start PNO request comes from control interface, wpa_supplicant
should wait until ongoing sched_scan (triggered by wpa_supplicant)
gets cancelled. Issuing cancel sched_scan and start PNO scan
one after another from pno_start() would lead wpa_supplicant to clear
wps->sched_scanning flag while getting sched_scan stopped event
from driver for cancel sched_scan request. In fact, PNO scan will
be in progress in driver and wpa_s->sched_scanning will not be set
in such cases.

In addition to this change, RSSI threshold limit is passed as part of
start sched_scan request. This was previously set only in pno_start(),
but the same parameter should be available for generic sched_scan calls
as well and this can now be reached through the new PNO start sequence.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-22 19:41:45 +02:00
Max Stepanov
a6cff8bfa8 wpa_supplicant: Fix seg fault in wpas_ctrl_radio_work_flush() in error case
Verify wpa_s->radio pointer before accessing it. If interface addition
fails, this could get called before wpa_s->radio has been set.

The segmentation fault details:

Program received signal SIGSEGV, Segmentation fault.
0x00000000004b9591 in wpas_ctrl_radio_work_flush (wpa_s=0x77fff0) at ctrl_iface.c:5754
5754		dl_list_for_each_safe(work, tmp, &wpa_s->radio->work,

Call stack:
0  wpas_ctrl_radio_work_flush (wpa_s=0x77fff0) at ctrl_iface.c:5754
1  wpa_supplicant_deinit_iface (wpa_s=0x77fff0, notify=0, terminate=0) at wpa_supplicant.c:3619
2  wpa_supplicant_add_iface (global=0x75db10, iface=0x7fffffffe270) at wpa_supplicant.c:3691
3  wpas_p2p_add_p2pdev_interface (wpa_s=0x75dd20) at p2p_supplicant.c:3700
4  main (argc=<optimized out>, argv=<optimized out>) at main.c:317

Function:
5750	void wpas_ctrl_radio_work_flush(struct wpa_supplicant *wpa_s)
5751	{
5752		struct wpa_radio_work *work, *tmp;
5753
5754		dl_list_for_each_safe(work, tmp, &wpa_s->radio->work,
5755				      struct wpa_radio_work, list) {
5756			struct wpa_external_work *ework;
5757
5758			if (os_strncmp(work->type, "ext:", 4) != 0)

Root cause:
(gdb) p wpa_s->radio
$1 = (struct wpa_radio *) 0x0

Signed-hostap: Max Stepanov <Max.Stepanov@intel.com>
2014-01-22 19:25:22 +02:00
David Spinadel
f62a3c2fce P2P: Clone dtim_period to a new interface
Cloning dtim_period is needed for P2P GO.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2014-01-22 19:24:41 +02:00
Jouni Malinen
88a0bcab6b Update copyright years in the manpages
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-21 16:33:25 +02:00
Dan Winship
32185f541c Sync manpages and command-line options
Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-01-21 16:31:50 +02:00
Dan Williams
b948e78b46 Add manpage for eapol_test
Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-01-21 16:30:46 +02:00
Dan Williams
36bd29ee5e wpa_supplicant: Fix usage text based on build options
Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-01-21 16:28:31 +02:00
Raja Mani
dd271857a5 Skip normal scan when PNO is already in progress
Scan request failures are observed in wpa_supplicant debug log when
Android framework starts PNO scan in driver via ctrl interface command
'set pno 1' and wpa_supplicant also tries to issue a scan request after
PNO has started in the driver.

Some drivers may reject a normal scan request when PNO is already in
progress. wpa_supplicant should consider PNO status before issuing start
scan request to the driver. Otherwise, wpa_supplicant will get failures
from driver for the scan request and it will end up rescheduling scan
request in periodic interval and get a start scan request failure for
each attempt.

In order to avoid unnecessary scan attempt when PNO scan is already
running, PNO status is checked before issuing scan request to driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-21 16:19:49 +02:00
Rashmi Ramanna
a2d6365760 P2P: Extend the listen time based on the active concurrent session
A P2P Device while in the Listen state waiting to respond for the
obtained group negotiation request shall give a fair chance for other
concurrent sessions to use the shared radio by inducing an idle time
between the successive listen states. However, if there are no
concurrent operations, this idle time can be reduced.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-20 22:55:09 +02:00
Dmitry Shmidt
443427e4ed P2P: Add missing direct global ctrl_iface commands for P2P
It should be noted that these commands are not exclusively used for P2P
or in the global context, so use of these commands through the global
control interface for operations that are specific to a single interface
have undefined behavior and that behavior may change in the future. As
such, these are recommend only for operations that are in the global
context (e.g., for P2P management).

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-01-17 11:58:36 +02:00
Jithu Jance
37b4198af4 P2P: Use GO's operating channel to optimize scan during join
Use P2P GO's operating channel information, if known, to do a single
channel scan during the join operation.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2014-01-17 11:57:07 +02:00
Arend van Spriel
a0e9d89203 Use minimal scan delay upon EVENT_INTERFACE_ADDED
This patch resets the static interface_count to zero in case of
wpa_supplicant_driver_init() call for wpa_s which is in
INTERFACE_DISABLED state. This interface_count is used for the delay of
the scan which is now minimal for dynamically added interfaces. This may
collide with a scan for another interface, but the same is true for any
chosen delay in this scenario. Also the state change to DISCONNECTED is
moved to wpa_supplicant_driver_init() so it will move from
INTERFACE_DISABLED to INACTIVE when there are no enabled networks.

Tested-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
2014-01-17 11:50:31 +02:00
Arend van Spriel
5ddd07cb37 Reset normal_scans counter upon entering INTERFACE_DISABLED state
Depending on the implementation, the scheduled scan may not give results
quickly when in DISCONNECTED state. This patch resets
wpa_s::normal_scans upon entering to the INTERFACE_DISABLED state so a
normal scan is assured upon going to DISCONNECTED state after the
interface has been re-enabled. This mainly solves a long reconnect time
observed upon repeated kernel driver reloads, i.e., third reload
resulted in a scheduled scan.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-hostap: Arend van Spriel <arend@broadcom.com>
2014-01-17 11:48:17 +02:00
Sunil Dutt
3ed97271ba TDLS: Pass peer's Supported channel and oper class info during sta_add
The information of the peer's supported channel and operating class
is required for the driver to do TDLS off channel operations with a
compatible peer. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-14 17:24:33 +02:00
Jouni Malinen
c48414af8f P2P: Limit join-a-group scans based on SSID from invitation
If we already know the SSID of the P2P group we are trying to join, use
that SSID to limit scan responses and BSS selection since we do not
really look for any other network in this case. In addition, this can
fix cases where the peer has just changed its SSID (e.g., started a new
group) and there may be multiple BSS entries for the same BSSID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 21:39:06 +02:00
Jouni Malinen
78f0c933e0 Flush secondary device types on FLUSH command
This makes it possible to clear previously configured secondary device
types.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:27:30 +02:00
Jouni Malinen
2b384109f2 P2P: Allow requested device type to be specified with p2p_find
This allows filtering of P2P peers that reply to the device discovery
Probe Request frames.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 20:01:19 +02:00
Jouni Malinen
d9bb2821e7 Clear configuration blobs on FLUSH command
All te network blocks and credentials were already cleared, but
configurations blobs should also be cleared here, e.g., to get
more consistent behavior test cases using EAP-FAST PACs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 16:42:15 +02:00
Jouni Malinen
c60ba9f7ab Skip network disabling on expected EAP failure
Some EAP methods can go through a step that is expected to fail and as
such, should not trigger temporary network disabling when processing
EAP-Failure or deauthentication. EAP-WSC for WPS was already handled as
a special case, but similar behavior is needed for EAP-FAST with
unauthenticated provisioning.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 16:42:15 +02:00
Ben Greear
3043b4f455 nl80211: Document how to configure for libnl 2.0 and 3.2
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>

Signed-hostap: Ben Greear <greearb@candelatech.com>
2014-01-07 15:35:14 +02:00
Jouni Malinen
95fb2db242 P2P: Reject group formation on WPS provisioning failure
There is no need to wait for the 15 second group formation timeout to
clear the state if WPS failure is detected during P2P group formation.
Allow the WPS exchange steps (WSC_NACK and EAP-Failure) to be completed
and remove the group to get rid of the extra wait.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
6fc61e180e Fix TX status processing during AP mode shutdown in wpa_supplicant
A TX status event could be received after the AP interface has already
been deinitialized. This needs to check for NULL pointer before trying
to indicate the event to AP functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
b6a9590b34 Interworking: Keep up to two pending GAS_REQUEST responses
Previously, only the last response data was kept in memory. This
increases that to hold up to two last responses to allow some more
parallel operations to be requested. In addition, the response data is
now freed as soon as the external program has fetched it.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
090b8e3d14 Update copyright notices for the new year 2014
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
356d1488c4 Interworking: Add optional freq argument to INTERWORKING_SELECT
This can be used to limit which channels are scanned using the specified
list of frequency ranges in the same format that the SCAN command uses.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
a09ffd5f2f Fix req_scan-deplete-timeout and update eloop API for this
Commit e2f5a9889a was supposed to prevent
new scan request from pushing out the old one. However, it did not
really do that since eloop_deplete_timeout() returned 0 both for the
case where the old timeout existed (and was sooner) and if the old
timeout did not exist. It returned 1 only for the case where an old
timeout did exist and was larger than the new requested value. That case
used to result in wpa_supplicant_req_scan() rescheduling the timeout,
but hew code in eloop_deplete_timeout() did the exact same thing and as
such, did not really change anything apart from the debug log message.

Extend the eloop_deplete_timeout() (and eloop_replenish_timeout() for
that matter since it is very similar) to return three different values
based on whether the timeout existed or not and if yes, whether it was
modified. This allows wpa_supplicant_req_scan() to schedule a new
timeout only in the case there was no old timeout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
083916c022 P2P: Clear p2p_disabled and p2p_per_sta_psk on FLUSH command
The control interface FLUSH command now includes clearing of
"P2P_SET disabled 1" and "P2P_SET per_sta_psk 1".

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
3f45fc403f P2P: Clear services on FLUSH command
The control interface FLUSH command now includes the step executed by
the P2P_SERVICE_FLUSH command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
1f965e622a Allow external programs to request wpa_radio work items
The new control interface command RADIO_WORK can be used by external
programs to request radio allocation slots from wpa_supplicant if
exclusive radio control is needed, e.g., for offchannel operations. If
such operations are done directly to the driver, wpa_supplicant may not
have enough information to avoid conflicting operations. This new
command can be used to provide enough information and radio scheduling
to avoid issues with such cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
6428d0a71f Do not start wpa_radio work during externally triggered scan
If an external program triggers a scan, wpa_supplicant does not have a
wpa_radio work item for this operation to protect against other
offchannel operations. This can result in operations failing, so try to
avoid damage by not starting any new wpa_radio work items during a scan
that was started by another process.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
6470f471e4 Remove unneeded scan delay on connection-in-progress
This type of protection against concurrent connection and scan
operations is now enforced through the wpa_radio work mechanism, so this
separate protection mechanism is not needed anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
4bb232153f Remove unneeded GAS query delay on connection-in-progress
This type of protection against concurrent connection and offchannel GAS
operations is now enforced through the wpa_radio work mechanism, so this
separate protection mechanism is not needed anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
6ac4b15ef8 Use wpa_radio work for connection
This protects against conflicting offchannel operations during
connection (authentication, association, EAP exchanges, 4-way
handshake).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
b9e6d7001d Use radio work for GAS requests
Avoid concurrent GAS operations with any other exclusive use of the
radio by using the radio work queuing mechanism. This replaces some of
the earlier constraints on concurrent operations with the more generic
wpa_radio work concept.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
e05e130837 P2P: Use radio work to protect offchannel Action frame exchanges
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
e1d1c8e223 Use radio work for P2P Listen requests
Avoid concurrent P2P Listen operations with any other exclusive use of
the radio by using the radio work queuing mechanism. This removes some
of the earlier workarounds that postponed scans depending on other
operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 09:45:32 +02:00
Jouni Malinen
1b5d4714dd Use radio work for P2P scan requests
Avoid concurrent P2P scan requests with any other exclusive use of the
radio by using the radio work queuing mechanism. This removes some of
the earlier workarounds that postponed scans depending on other
operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:39:25 +02:00
Jouni Malinen
d12a51b5d2 Use radio work for scan requests
Avoid concurrent scan requests by using the radio work queuing
mechanism.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:37:50 +02:00
Jouni Malinen
b1ae396f59 Add framework for exclusive radio operations
The new radio work item concept can be used to request time for an
operation that requires exclusive radio control, e.g., a scan. Once the
radio is available, the registered callback function will be called.
radio_work_done() must be called once the exclusive radio operation has
been completed, so that the radio is freed for other operations. The
special case of deinit=1 is used to free the context data during
interface removal. That does not allow the callback function to start
the radio operation, i.e., it needs to free the allocated resources
and return.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:37:03 +02:00
Jouni Malinen
dd43aaa509 Add helper functions for cloning and freeing scan parameters
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:35:52 +02:00
Jouni Malinen
06f9acce18 Ignore externally triggered scan results with scan_res_handler
wpa_s->scan_res_handler is set only for cases where a scan operation is
requested for a specific purpose. As such, this callback should only be
called when a scan result from a scan that was triggered by
wpa_supplicant is processed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:34:17 +02:00
Jouni Malinen
c9b5559737 Clean up ctrl_iface debug prints for monitor events
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:34:09 +02:00
Jouni Malinen
d31b5ac778 Use cleaner debug print for ctrl_iface commands with private info
Convert this to a text string instead of ASCII hexdump to make the
debug log more convenient to use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:50 +02:00
Jouni Malinen
9595151f3f Remove duplicated RX ctrl_iface hexdump
The newer wpa_dbg() print includes the same information in a more
convenient form, so remove the duplicate RX ctrl_iface hexdump in the
cases where there is no key material in the control interface commands
(the possible-key-material case is still using wpa_hexdump_ascii_key).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:18 +02:00
Jouni Malinen
9b850799c1 Fix scan-cache-clearing operation to avoid unnecessary cases
wpa_drv_scan() success case was supposed to clear
wpa_s->clear_driver_scan_cache, not params->only_new_results (which
would do nothing here).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:55:51 +02:00
Jouni Malinen
2f30cac36f Avoid unnecessary key clearing operations
Track set_key operations per-key index and clear keys on disconnection
only if the key was set (or may have been set which is the case for the
first operation after wpa_supplicant start).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 23:49:38 +02:00
Jouni Malinen
949938aadf Ask driver to report only new scan results if requested
If the BSS table within wpa_supplicant is flushed, request the driver to
flush its own scan result table during the next scan. This can avoid
unexpected old BSS entries showing up after BSS_FLUSH or FLUSH command
in cases where the driver may maintain its internal cache of scan
results (e.g., cfg80211 BSS table persists at least for 15 seconds).

In addition to doing this automatically on BSS_FLUSH/FLUSH, a new SCAN
command argument, only_new=1, can be used to request a manual scan
request to do same. Though, it should be noted that this maintains the
BSS table within wpa_supplicant. BSS_FLUSH followed by SCAN command can
be used to clear all BSS entries from both the driver and
wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 23:03:31 +02:00
Jouni Malinen
101bdc2e8c Remove forgotten notes about already removed driver wrappers
These old driver wrappers have been removed quite some time ago, but
some of the build configuration notes were still describing how they
are configured.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:23:30 +02:00
Jouni Malinen
70067530b6 Update EAP-FAST note regarding OpenSSL support
This is now supported in the current OpenSSL version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:13:11 +02:00
Jouni Malinen
5890fa81d8 WPS: Fix clear-from-timeout handling to avoid race condition
The 100 ms timeout to clear WPS state after EAP-Failure has been
received worked otherwise fine, but it opened a race condition on
another WPS operation starting within that wait. If that happens, the
timeout will cancel that new operation unexpectedly. Fix this by
cancelling the timeout from wpas_clear_wps().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 22:00:09 +02:00
Jouni Malinen
c64e3a08a9 P2P: Send received Presence Response information to ctrl_iface monitors
The P2P_PRESENCE_REQ command did not give any easily available
indication of the response received from the GO. Make this more useful
by providing such response (if received) as a ctrl_iface monitor event
(P2P-PRESENCE-RESPONSE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 18:44:44 +02:00
Jouni Malinen
c5838683a8 Mark wpas_wps_er_nfc_handover_sel() static
This is not used outside wps_supplicant.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:37:15 +02:00
Jouni Malinen
0187c41d88 Declare wpa_debug_* variables in src/utils/wpa_debug.h
These were somewhat more hidden to avoid direct use, but there are now
numerous places where these are needed and more justification to make
the extern int declarations available from wpa_debug.h. In addition,
this avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:29:52 +02:00
Jouni Malinen
fcc61230d1 Declare wpa_drivers in src/drivers/driver.h
This avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:19:37 +02:00
Jouni Malinen
0d79b50ae7 Clear EAPOL Logoff state on FLUSH command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
4848a38d85 Get rid of duplicated cipher suite and AKM definitions
WPA_CIPHER_* and CIPHER_* are used for the exact same set of cipher
suites with the main difference being that the WPA_CIPHER_* version is
suitable to be used as a bitfield. Similarly, WPA_KEY_MGMT_* and
KEY_MGMT_* have similar design for AKMs. There is no need to maintain
two separate copies of the definitions since the bitfield compatible
version can be used for both needs. Get rid of the CIPHER_* and
KEY_MGMT_* versions to clean up the implementation by getting rid of
unnecessary mapping functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
ef93abded7 WPS: Clean up UUID debug print
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 23:35:48 +02:00
Jouni Malinen
03ed332407 Interworking: Allow cred blocks not to be saved to a file
The new cred block parameter 'temporary' can be used to indicate that a
cred block is not to be saved to wpa_supplicant configuration file
(e.g., "SET_CRED 0 temporary 1"). This is similar to the concept of
temporary network blocks and allows cred blocks to be managed outside
the wpa_supplicant config file when other parameters are still saved to
the file written by wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 15:43:55 +02:00
Jouni Malinen
04f7ecc686 Reset WPA parameters to default values on FLUSH command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 19:25:05 +02:00
Jouni Malinen
152cff6ba6 P2P: Remove WPA_DRIVER_FLAGS_P2P_MGMT option
The option of handling upper layer P2P management operations within the
driver/firmware was originally planned to be used with wpa_supplicant,
but this has not really happened and there is no clear sign of this
being needed in the near term either. This functionality has not been
completed and it is certainly not being kept up-to-date or tested. As
such, it is best to remove it for now and if this or something similar
is needed in the future, it can be brought back once a clear need for it
has been demonstrated first.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 18:20:47 +02:00
Jouni Malinen
538d6f4b54 WPS: Use shorter scan interval during pre-provisioning search
Previously, the shorter scan interval was already in use for the
connection following the provisioning step, but same optimization can
also be used for the pre-provisioning scan.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 18:02:05 +02:00
Jouni Malinen
3187fd900d WPS: Replace wpas_wps_in_progress with identical wpas_wps_searching
There is no point in maintaining two different functions that do
practically the same check of WPS state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:59:12 +02:00
Jouni Malinen
dbfb8e82ff Remove unnecessary EVENT_RX_ACTION
This driver event was used separately for some Action frames, but all
the driver wrappers converted to this from information that would have
been enough to indicate an EVENT_RX_MGMT event. In addition, the
received event was then converted back to a full IEEE 802.11 management
frame for processing in most cases. This is unnecessary complexity, so
get rid of the extra path and use EVENT_RX_MGMT for Action frames as
well as other management frame subtypes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
8aaafcee9e Make local UUID available through ctrl_iface STATUS command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
7b02375a41 Clear wps_fragment_size on FLUSH command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
db76aa64f1 Fix PeerKey 4-way handshake
The earlier changes to buffer EAPOL frames when not associated to avoid
race conditions (especially commit
3ab35a6603 but maybe something even before
that) broke PeerKey 4-way handshake. Fix this by using a separate check
before the race condition workaround to process PeerKey 4-way handshake
EAPOL-Key messages differently.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-28 16:32:54 +02:00
Jouni Malinen
2cd0f6a429 WNM: Add Target BSSID into BSS Transition Management Response
P802.11-REVmc clarifies that the Target BSSID field is always present
hen status code is zero, so match that requirement.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
a8a6a35fd6 WNM: Use nonzero dialog token in BSS Transition Management Query
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Sudha Daram
3c1060ff8f WNM: Add debug logs to get the RSSI from the scan results
This commit adds few more debug prints to log the RSSI information from
the scanned BSSIDs and the current connected BSSID when comparing
neighbor results during WNM Transition Management Request processing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 22:26:05 +02:00
Jouni Malinen
c511b321f3 WPS: Remove old duplicate network even if key is different
Previously, WPS credential provisioning removed duplicated network
entries only if they had identicical SSID, security parameters, and the
keys. However, it is possible that the AP has changes its keys and
leaving the old entry behind can result in connectibity issues (e.g.,
with 4-way handshake failing due to use of the old PSK). Fix this by
allowing the old network entry to be removed even if the keys
(passphrase, PSK, WEP keys) are different.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Jouni Malinen
9d2cb3ec94 Make CONFIG_TESTING_OPTIONS=y enable all testing options
This makes it easier to enable various testing parameters and
functionality in build configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Jouni Malinen
662b40b16b WPS: Reduce scan wait time during WPS processing
Since the AP is expected to be available, there is no need to wait for
the full five second wait between scans during WPS connection. This
speeds up cases where the first scan misses the AP for some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Jouni Malinen
015af91fea Do not use results from externally requested scan for network selection
It may not always be desirable to trigger reassociation or network
change based on scan results from externally to wpa_supplicant trigger
scan operations. Skip network selection and roaming determination if the
received scan result is known to be triggered by something external to
wpa_supplicant. The control interface SCAN command can be used to
request wpa_supplicant to determine the best network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 20:50:28 +02:00
Jouni Malinen
1cd93ff743 Reschedule own scan request if an externally started one is in progress
This avoids some unnecessary attempts to request the driver to start a
scan while it is still busy with the scan operation that was started by
an external program.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:48:52 +02:00
Jouni Malinen
dc3906cb2d Show timing information about scan requests in debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:48:52 +02:00
Jouni Malinen
d81c73be18 Optional scan id for ctrl_iface SCAN requests
This allows users of wpa_supplicant control interface to figure out when
their specific scan command has been started and completed. For example:

CTRL-EVENT-SCAN-STARTED
> scan freq=2412,2417 passive=1 use_id=1
3
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-STARTED id=3
CTRL-EVENT-SCAN-RESULTS id=3

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:48:52 +02:00
Jouni Malinen
a5f40eff18 Track whether scan was started by us or an external program
This can be used to improve scan behavior in cases external programs
request scans directly from the driver.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
88c2d48860 Allow passive scan to be requested with SCAN passive=1
This allows external programs to request wpa_supplicant to execute
a passive scan (i.e., do not send any Probe Request frames).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
69278f7328 Remove unused last_scan_full
This parameter was not really used for anything else apart from a debug
message in the same function that set it. In addition, cfg80211 returns
the set of scanned frequencies even for the full scan, so the code that
was setting this conditionally on frequency list not being there was not
really ever entered either.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
1f5d2dd3d7 Interworking: Allow EAP-FAST to be used
This behaves like PEAP as far as Interworking network selection is
concerned.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
6ffa1687ee Add GAS-QUERY-START and GAS-QUERY-DONE event messages
External programs can use these new control interface events to better
track progress of GAS operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
fee5234284 Allow channel list to be specified for SCAN command
The new freq=<frequency ranges> parameter to the SCAN command can be
used to request a scan to be performed on the specified set of channels
instead of on all channels. For example, "wpa_cli scan
freq=2400-2500,5180" would scan channels 1-14 and 36. Only the channels
that the driver indicates as enabled and that are within the specified
ranges are included in the request.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
98eda9c26d Move int_array helpfer functions to utils/common.c
These can be useful outside scan.c, so make them available.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
a4cfb48694 Add make lcov-html to generate code coverage report
In addition, update build rules to compile object files in the same
directory as the source code file if CONFIG_CODE_COVERAGE=y is set to
make lcov find the source code files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
4daa011be4 Clean up cipher capability prints
Use an array of ciphers and a loop instead of copy-pasted copies of the
same printing functionality for each cipher.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 10:44:06 +02:00
Jouni Malinen
30675c3416 Add definitions for new cipher suites from IEEE Std 802.11ac-2013
This adds initial parts for supporting the new GCMP-256, CCMP-256,
BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:21:04 +02:00
Moshe Benji
ab41595f35 wpa_supplicant: Fix crash when terminating all interfaces
In wpa_supplicant_terminate_proc(), while iterating and
terminating interfaces, after an interface is terminated,
we can no longer access its memory as it is no longer valid
and causes a crash.

Fix this by saving the pointer to the next interface before freeing
the current one to avoid accessing an invalid memory location.

Signed-hostap: Moshe Benji <moshe.benji@intel.com>
2013-12-24 08:29:28 +02:00
Johannes Berg
a12d34546a wpa_supplicant: Use monotonic time for last_scan check
This just serves to check if there was a scan within
the last 5 seconds, hence it should use monotonic time.
While at it, also use os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:21:18 +02:00
Johannes Berg
51bffab117 WPS: Use monotonic time for AP connection attempt
This is only used for a debug message, but that message prints
the time since the last attempt, so it should use monotonic
time instead of wall clock.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:19:47 +02:00
Johannes Berg
6473e5c842 wpa_supplicant: Use relative time for TKIP Michael MIC failures
The MMIC failure code should use monotonic time to check
whether 60 seconds have elapsed or not. For type-safety,
use struct os_reltime for the timestamp variable, and
also convert to using os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:18:47 +02:00
Johannes Berg
4e1eae1dff wpa_supplicant: Use monotonic time for temp-disabled networks
Temporarily disabled networks are disabled for a certain
duration, so the code should use monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:01:59 +02:00
Johannes Berg
151ab808fa P2P: Use monotonic time for GO client waiting
GO activation can fail if the first client doesn't connect
within a certain time, but this should not be dependent on
wall time -- use monotonic time instead.

While at it, use os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:00:03 +02:00
Johannes Berg
3326f19355 IBSS RSN: Use monotonic time for reinit detection
The reinit detection skips reinit when the time since the own
authentication frame TX is less than half a second, so it shouldn't
be affected by wall time and use monotonic time instead.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:58:21 +02:00
Johannes Berg
c2be937ce7 wpa_supplicant: Use monotonic time for EAPOL RX workaround
The EAPOL RX workaround checks that the events are less than 100 ms
apart, so only uses relative times and should use monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:35:42 +02:00
Johannes Berg
e72a001b0f bgscan: Use monotonic time
The bgscan simple and learn algorithms should run regardless
of wall clock time jumps, so make them use monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:34:43 +02:00
Johannes Berg
acb69cec6f wpa_supplicant: Use monotonic time for RX/BSS times
The BSS table, scan timeout, and related functionality should use
monotonic time since they care about relative values (age) only.
Unfortunately, these are all connected, so the patch can't be split
further. Another problem with this is that it changes the driver wrapper
API. Though, it seems only the test driver is using this.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:27:02 +02:00
Johannes Berg
46b8d4c004 wpa_supplicant: Use monotonic time for SA query timeout
The SA query timeout is just a regular timeout (currently
hard-coded to 1000 TU), so use monotonic time for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:17:25 +02:00
Eliad Peller
3e06180fe0 bgscan_learn: Start scanning from the first freq
bgscan_learn_get_probe_freq() starts from returning the second entry in
the supp_freqs arrays. Change its logic a bit to make it start from the
first entry.

Signed-hostap: Eliad Peller <eliad@wizery.com>
2013-12-24 06:54:34 +02:00
Eyal Shapira
f4c73ae640 bgscan_learn: Fix initial interval
In case the initial signal level of the associated BSS was above the
given threshold, bgscan_learn module would begin using the
short_interval but never switch to the long_interval as there would be
no signal change event. Make the init code poll for the current signal
level and set scan_interval accordingly. This logic exists in
bgscan_simple but was missing in bgscan_learn.

Signed-hostap: Eyal Shapira <eyal@wizery.com>
2013-12-24 06:54:24 +02:00
Eliad Peller
7dab119380 bgscan_learn: Avoid redundant frequencies
Some hw modes (e.g., 11b and 11g) contain the same frequencies,
causing the supp_freqs array to be populated with redundant entries.

Check for the existence of the freq before adding it.

Signed-hostap: Eliad Peller <eliad@wizery.com>
2013-12-24 06:49:26 +02:00
Eliad Peller
3727123269 bgscan: Stop bgscan only on disassociation
Stopping bgscan on any state other than COMPLETED results
in bgscan reset (stop + start) on every rekeying operation.

Signed-hostap: Eliad Peller <eliad@wizery.com>
2013-12-24 06:48:28 +02:00
Jouni Malinen
b2838baf6a Update IBSS documentation to include RSN option
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-23 20:21:17 +02:00
Jouni Malinen
429dd9aff1 Advertise QoS Map support based on driver capability
Do not assume the driver supports QoS Mapping, but instead, advertise
support for this only if CONFIG_INTERWORKING is defined and driver
indicates support for configuring QoS Map.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-23 11:05:20 +02:00
Tomasz Bursztyka
b154a24e83 Fix a never-ending loop with multiple radios in wpa_supplicant
Commit 202dec2a94 introduced a never
ending loop for a case where a single wpa_supplicant process is used
with multiple radios. Fix this by advancing the iface pointer properly
to the next interface in the loop until a NULL pointer is hit.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2013-12-14 21:16:05 -08:00
Janusz Dziedzic
8d1fdde7f0 nl80211/hostapd: Extend channel switch notify handling
Adds support for VHT by parsing bandwidth and center_freq{1,2}.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-12-07 20:50:15 -08:00
Jithu Jance
8567866d75 P2P: Handle frequency conflict in single channel concurrency case
Based on priority, remove the connection with least priority whenever
a frequency conflict is detected.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-12-07 18:55:58 -08:00
Dmitry Shmidt
b125c48fce P2P: Add wfd_dev_info= field for device found event
This field allows adds enough information into the P2P-DEVICE-FOUND
events to figure out if the peer supports Wi-Fi Display.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-12-07 17:57:55 -08:00
Naresh Jayaram
f7579502a6 eap_proxy: Extend Android.mk to support additional libraries
Allow addition static and shared libraries to be specified from the
eap_proxy_*.mk file for Android build. In addition use $(LOCAL_PATH) as
a prefix for that Android makefile part.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-07 16:54:24 -08:00
Jouni Malinen
0ad3b9c402 Use wpa_radio data for get_shared_radio_freqs()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
1b544ffa74 Use wpa_radio data for wpas_wpa_is_in_progress()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
5b81927d58 Use wpa_radio data for wpas_p2p_search_delay()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
c67e7e2a23 Use wpa_radio data for channel list updates
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
f88f19b465 Use wpa_radio data for scan result updates
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
202dec2a94 Add shared per-radio structure for wpa_supplicant
struct wpa_radio is used as a shared data structure between all struct
wpa_supplicant instances that share the same physical radio.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
73c00fd794 Move wpa_supplicant driver initialization into a helper function
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:36:29 +02:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Ilan Peer
6f72577f29 P2P: Handle INTERFACE_DISABLED event on a P2P GO interface
An INTERFACE_DISABLED event received on an interface that is
currently operating a P2P GO means that the group session ended.
In such a case, if the interface was dynamically added remove it, and
if not, remove all the network blocks that are temporary, assuming
that if needed a new session will be started by an external entity.

The use case was triggering rfkill (both SW and HW). This case popped up
as part of a testing cycle, where after a toggle in the rfkill state,
the result was that the interface was not deleted, but on the other hand
the wpa_supplicant did not configure the kernel to re-start the AP
functionality again.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-24 12:29:20 +02:00
Loic Poulain
1245503188 Restore scan_req if sta scan is rescheduled in the scan results event
On scan results event if a concurrent P2P scan was triggered previously,
scan results processing is canceled, p2p_find executed, and a new sta
scan is triggered (pending scan). However, this new sta scan does not
restore the scan_req value of the previous scan (whose scan result has
been canceled).

If we are currently connected to an AP and use ap_scan=2, the new
triggered scan will cause an associtation-without-scan in
wpa_supplicant_scan:
(ap_scan == 2 & scan_req != MANUAL_SCAN_REQ)
	=> wpa_supplicant_assoc_try()
causing an association error and a disconnection.

This patch fixes this issue by restoring the previous scan_req value.

Signed-off-by: Loic Poulain <loicx.poulain@intel.com>
2013-11-24 11:47:30 +02:00
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Dmitry Shmidt
a94737ea38 Android: P2P: Remember country locale
This updates P2P modules based on the Android specific
DRIVER COUNTRY command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 20:23:16 +02:00
Jouni Malinen
5e2c3490d5 Android: Add driver_cmd for arbitrary driver commands
This is a mechanism used in Android to extend driver interface in vendor
specific ways. This is included only for the purpose of Android
compatibility. Proper interface commands should be used for any new
functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:08 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Jithu Jance
1cba9bea96 STA: Cancel sched_scan while initiating wps_reassoc
Scan initiated from wps_nfc command context was ketp on
getting rescheduled due to an on-going scheduled scan. So
cancel sched_scan before issuing a reassociation scan.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-20 22:28:28 +02:00
Jouni Malinen
215a02f359 Add Wi-Fi Direct to the build configuration example
In addition, include Wi-Fi Direct support for Android builds by
default.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 20:49:48 +02:00
Rashmi Ramanna
6fc48481e4 P2P: Short scan wait to speed up the group re-invocation
The shorter 250 ms wait for the next scan request can be used also for
the case of persistent group re-invocation instead of just formation of
a new group. This speeds up the process and makes this more robust
especially in cases where the GO is using MCC.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 16:35:30 +02:00
Jouni Malinen
93a06fe103 Fix QoS Map Configure frame use
The QoS Map Set element was passed in full to the driver instead of just
the payload of the element. This resulted in the updated QoS Map being
rejected. Validate the element id/len and send only the payload to the
driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 12:49:27 +02:00
Jouni Malinen
1b665cbf51 P2P: Fix channel preference use for MCC p2p_connect
Only force_freq was used in the wpas_p2p_set_own_freq_preference() call
which allowed the P2P module channel re-selection to ignore the
preference for using a channel we are already using. Fix this by setting
either force_freq or pref_freq as the preference based on which one is
set. This allows p2p_ignore_shared_freq parameter to be used whether to
prefer the shared frequency in this case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:39:29 +02:00
Jouni Malinen
5624ccfe93 P2P: Optimize default case for own freq preference setting
There is no need to use wpas_p2p_num_unused_channels() here in the
default configuration of p2p_ignore_sahred_freq=0, so re-order the
conditions to skip that operation. This is a bit more efficient and the
debug log is also a bit cleaner in the default case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:29:25 +02:00
Jouni Malinen
d0f61a4bea P2P: Fix p2p_ignore_shared_freq=1 when inviting a peer
p2p_ignore_shared_freq=1 was supposed to allow a MCC-capable device to
ignore a preference for using the same channel on multiple interfaces.
However, it was not used when inviting a peer to re-invoke a persistent
group. This case needs special handling since the peer's channel list is
not available to perform channel reselection and the operating channel
indicated in the Invitation Request frames ends up getting used as the
operating channel if the transmitted of that frames becomes the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:26:16 +02:00
Jouni Malinen
21e491f2f6 P2P: Fix p2p_ignore_shared_freq=1 during invitation processing
p2p_ignore_shared_freq=1 was supposed to allow a MCC-capable device to
ignore a preference for using the same channel on multiple interfaces.
However, it was not used during processing of an Invitation Request. Fix
that case to use channel preference instead of channel forcing if free
channels are available. This allows p2p_ignore_shared_freq=1 case to
ignore the preference.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:15:45 +02:00
Jouni Malinen
107a89448c P2P: Clean up wpas_p2p_setup_freqs() debug message
It is confusing to talk about current operating channels being
unavailable for P2P when there are no current operating channels. Make
the debug message easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 18:16:27 +02:00
Jouni Malinen
7d669cf7a1 P2P: Clean up wpas_p2p_init_go_params()
It is clearer if there is only a single loop of the channel list and
shared debug prints. In addition, the note about current operating
channels not being available is quite confusing if there are no
operating group, so make that part of the message conditional.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 18:13:15 +02:00
Jouni Malinen
b17d89bd10 P2P: Fix channel selection for MCC case
Commit 0d08efa447 modified
wpas_p2p_setup_freqs() design to use number of MCC channels capability
from the driver. However, it resulted in regression on how the preferred
vs. forced channel selection is done in the case of a MCC device.
force_freq was set unconditionally even though this was supposed to be
done only if no additional channels are available. pref_freq needs to be
used when possible to avoid preventing connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 16:53:44 +02:00
Jithu Jance
f86d282f43 Handle legacy scan interruption of sched_scan/PNO
While starting from PNO start context, the scheduled scan was not
setting the flag wpa_s->scanning. This was resulting in the subsequent
SCAN command to proceed further and send command to nl80211/cfg80211.
The expected behavior of cancelling sched_scan was not happening here.

While sched_scan is in progress and a legacy scan comes on the
cli/socket, the sched_scan is cancelled and normal scan is allowed to
continue. However, sometimes sched_scan cancelled event comes a bit
delayed and we will send out the scan command before the wpa_s->scanning
is cleared. Instead, reschedule the incoming scan req if the
wpa_s->scanning shows that it is still in progress.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-18 14:35:48 +02:00
Andrei Otcheretianski
334bf36ac5 Add chan_switch to ctrl interface of wpa_supplicant and hostapd
Add chan_switch to the control interface of wpa_supplicant and hostapd,
and also to wpa_cli and hostapd_cli.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
bf281c129f Add AP channel switch mechanism
Build CSA settings and call the driver to perform the switch. Construct
Beacon, Probe Response, and (Re)Association Response frames both for CSA
period and for the new channel. These frames are built based on the
current configuration. Add CSA IE in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
dcca2219ae wpa_supplicant: Update channel switch driver interface
Add csa_settings struct which holds parameters for CSA. Change driver
interface for switch_channel(), so that it will receive this struct and
not only the new frequency as it was before. This allows wpa_supplicant
to provide all the required parameters (beacons, proberesp, assocresp,
CSA IE) which are required by cfg80211 implementation.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 16:48:33 +02:00
Jouni Malinen
e1925bde36 eloop: Remove eloop_none.c
This was supposed to be a minimal sample of eloop wrapper, but it is
unclear whether this is of that much use and the file has not been kept
up-to-date. Remove this file to reduce maintenance effort. The other
eloop*.c files can be used as a starting point if something new is
needed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 16:48:20 +02:00
Dmitry Shmidt
f6c2b8c367 Android: Add state message sent after 'status' command
This triggers re-transmission of CTRL-EVENT-STATE-CHANGE and
CTRL-EVENT-CONNECTED events on STATUS command for Android framework
specific processing.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-17 16:47:56 +02:00
Dmitry Shmidt
6b49907665 Android: Add SSID in supplicant change event
In addition, change wpa_s->pending_bssid to wpa_s->bssid for the BSSID
value in the event.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-17 16:47:45 +02:00
Masashi Honma
22cf7d7324 SCARD: Clean up SIM/USIM selection
Commit eb32460029 left an unneeded
sim_type argument to scard_init(). Remove that unnecessary argument to
clean up the implementation.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-11-17 16:47:38 +02:00
Paul Stewart
cea97a04f9 dbus_new: Add DBus TDLS methods
Add DBus methods for TDLS operations similar to those available
for the control interface. This includes Discover, Setup, and
Teardown commands. While here, add a method to query the TDLS
link status and add a DBus method for it.

Tested with CONFIG_TDLS enabled, on a TDLS-enabled host and
peer capable of TDLS:

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "peer does not exist"

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSDiscover string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSSetup string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "connected" after TDLS completes

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSTeardown string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "peer not connected"

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-17 16:47:32 +02:00
Jithu Jance
cc4952ad63 Request new scan only for the original interface
Request new scan only for the interface for which the original scan
request and results has come. Otherwise while sharing scan results along
with P2P interfaces, the new scan will be requested on P2P interfaces.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-17 16:47:22 +02:00
Jouni Malinen
fa58da2e6c Remove old mechanism of skipping scan request rescheduling
Since eloop_deplete_timeout() is doing practically same in
wpa_supplicant_req_scan(), revert the old mechanism from commit
7e1488494e to avoid unnecessary work in
this function.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 16:47:13 +02:00
Dmitry Shmidt
e2f5a9889a Deplete scan request if new time is less than remaining
This avoids pushing out previous scheduled scan requests based on new
events.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-17 16:46:58 +02:00
Vinay Krishna Eranna
dcd25d4c3b P2P: Use negotiated channel from invitation for persistent GO
During persistent group re-invocation, GO may end up using a different
channel as the operation channel compared to what was indicated in the
invitation frames. This may break the connection if the peer device ends
up scanning the GO only on the channel from the invitation frame. Fix
this by using the negotiated channel (if available) on the GO as the
operating channel instead of the channel that was provided in the
p2p_invite command to start negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-16 18:05:28 +02:00
Sunil Dutt
800d58721c TDLS: Provide external control to specify the peers for setup
There are use cases requesting the host driver to initiate the TDLS
setup with the peer only when configured by the external applications.
Thus, enable this control by tdls_external_control=1 and pass the
requisite information for the specific TDLS operation to the driver
on the request from such use cases.

This operation mode expects the driver to initiate TDLS link
automatically based on signal strength and traffic to a peer and tear
down links whenever they are not used or suitable due to signal strength
etc. The list of peers with which such operations are to be performed
are provided with the TDLS driver operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-15 03:02:08 +02:00
Dmitry Shmidt
58d6f91d16 Android: Reset MD5OBJS value before += operation
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-09 15:30:46 +02:00
Jouni Malinen
890b3a44cb Android: Sync Android.mk with Makefile
This brings in commit 411f567050 changes
to allow libdl to be linked in after OpenSSL.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-08 13:04:51 +02:00
Dmitry Shmidt
736abfc166 Android: Set proper path to keystore include dir
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 13:04:51 +02:00
Dmitry Shmidt
5e42035ed9 Android: Fix CONFIG_EAP_PROXY option and move it to right place
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:47:00 +02:00
Dmitry Shmidt
643fab30a0 Android: Add CONFIG_IEEE80211AC option to makefile
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:47:00 +02:00
Dmitry Shmidt
4ba83096e2 Android: Add CONFIG_EAP_UNAUTH_TLS option to makefile
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:47:00 +02:00
Ying Wang
53414a7e35 Android: Add liblog
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:46:59 +02:00
Kenny Root
1d415f1fcc Android: Switch keystore to binder
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:46:53 +02:00
Joe Onorato
4e5a4d3e57 Android: Get rid of LOCAL_MODULE_TAGS := user
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:41:05 +02:00
Kenny Root
206d81319e Android: Restore OpenSSL ENGINE support
We now use an OpenSSL ENGINE to support keystore functionality.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 11:40:13 +02:00
Dmitry Shmidt
b7997e01db Android: Remove obsolete WPA_UNICODE_SSID define
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-08 00:22:32 +02:00
Dmitry Shmidt
60cdfd7e25 Android: Fix compilation without BOARD_WPA_SUPPLICANT_DRIVER
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-07 14:04:30 +02:00
Dmitry Shmidt
e40634e654 Prohibit PNO start during assoc process and in connect state
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-07 14:01:33 +02:00
Dmitry Shmidt
3526ff0fad Android: Add ANDROID_P2P define under BOARD_WLAN_DEVICE
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-07 14:01:28 +02:00
Dmitry Shmidt
d0b2735240 Android: Fix CFLAGS -> L_CFLAGS
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-07 14:01:23 +02:00
Jouni Malinen
9ec876662b P2P: Allow GO P2P Device Address to be used for scan result matching
This is a better way of matching P2P groups based on the unique P2P
Device Address (e.g., from P2P Group ID) and SSID pair instead of using
the not necessarily unique P2P Interface Address.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 13:49:01 +02:00
Jouni Malinen
08b2677974 Interworking: Use SSID from the BSS entry
There is no need to parse the IE buffer again to find the SSID of the
BSS since that information is already stored in struct wpa_bss.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:17:48 +02:00
Jouni Malinen
50589751bf Interworking: Reject BSS based on disallow_aps
If a BSS is disallowed temporarily with disallow_aps, the network
connection is going to fail. As such, there is not much point in
allowing Interworking network selection to try to connect with such BSS.
As such, do not consider disallowed networks for automatic network
selection and reject requests to connect to them through
INTERWORKING_CONNECT.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
6ede8a7e4d Interworking: Avoid duplicated network blocks
Do not add multiple network blocks for the same network from a single
credential. INTERWORKING_CONNECT used to generate a new network block
for each instance regardless of what network blocks have already been
configured. While this allows the connection to go through, it is not
efficient to leave behind potentially large number of network blocks
with the same contents (or worse, changed contents). Address this by
removing an older network block for the same credential before adding a
new one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
d28f4e44f1 Interworking: Do not reconnect if already connected
If we are already connected to the selected AP with a network block
that was created based on the selected credential, do not force a
reconnection or network block update.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
217cf4991d P2P: Add more debug prints for frequency selection
This prints out get_shared_radio_freqs() results and related information
from P2P operations to make debug logs more helpful for figuring out
issues related to multi-channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 11:07:51 +02:00
Ilan Peer
4dd3f86834 P2P: Fix bug in GO frequency selection
When trying to choose a frequency that can be used for GO instantiation,
properly check if there are free channels that can be used.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-05 10:55:22 +02:00
Ilan Peer
9804873e53 wpa_supplicant: Fix bug in get_shared_radio_freqs
The idx variable was mistakenly set to 0 at the beginning of the
interface iteration. This could result in the operating channel of the
interface calling the function from being removed from the returned
frequency array if other interfaces were operating.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-05 10:55:22 +02:00
Haim Dreyfuss
3139270903 bgscan: Add global bgscan configuration
This option can be used to globally configure bgscan parameters
for all the network blocks.

Note that this configuration will not override a network block
specific bgscan settings, but will only be used in case that
the network block does not have a valid bgscan configuration.

Signed-hostap: Haim Dreyfuss <haim.dreyfuss@intel.com>
2013-11-05 10:26:31 +02:00
Naresh Jayaram
efc58df29c eap_proxy: Re-read IMSI from proxy in Interworking functionality
Try to read the IMSI values through the eap_proxy layer for Interworking
functionality again if the value was not available at startup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 10:12:14 +02:00
Jouni Malinen
18ca733248 SAE: Fix group selection
Number of regressions had shown up in wpa_supplicant implementation of
SAE group selection due to different integer array termination (-1 in
hostapd, 0 in wpa_supplicant) being used for SAE groups. The
default_groups list did not seem to use any explicit termination value.
In addition, the sae_group_index was not cleared back to 0 properly
whenever a new SAE session was started.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 18:07:49 +02:00
Jouni Malinen
65015b2d8e Replace unnecessary UTF-8 characters with ASCII versions
There is no need for using UTF-8 in these files when perfectly fine
ASCII versions of these characters exist.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 16:01:32 +02:00
Jouni Malinen
c092d83e26 P2P: Clear pending group formation data on group removal
It was possible for the wpa_s->show_group_started and wpa_s->go_params
to be left set when a P2P group was removed before group formation had
completed. In case a separate P2P group interface was not used, this
could rsult in all future scans using the hardcoded DIRECT-* SSID and as
such, not find the network they were trying to find. Fix this by
clearing these P2P parameters on group removal.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-01 10:31:55 +02:00
Jouni Malinen
9100b6607b P2P: Debug print reason for specific SSID for scan
It can be useful to see whether the specific P2P SSID was used for scan
based on p2p_in_provisioning or show_group_started when debugging issues
where this case shows up unexpectedly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-01 10:30:50 +02:00
Jouni Malinen
2aec4f3c0c Allow add-BSS operation to re-use existing netdev
When removing and re-adding the first wlan# netdev to hostapd
dynamically, the netdev is already present and should not be removed and
re-added to maintain its state as not-added-by-hostapd so that it does
not get removed automatically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:34:25 +02:00
Vinay Krishna Eranna
731ca6364e Update regulatory change to all virtual interface for the phy
wpas_p2p_setup_channels function uses the per interface information
(wpa_s->hw.modes) for setting up the available channel list for P2P
operation, but if a separate P2P interface is used (e.g., p2p0 on
Android), the wpa_s instance for that interface may not get an updated
channel list. This can result in some operations, like "P2P_SET
disallow_freq", using old channel list information (e.g., world roaming
information with passive-scan/no-ibss flags) which was initialized
during the start-up. This could result in P2P functionality using
conflicting or obsolete channel information.

To resolve this issue, update channel list information on regulatory
change events to all of the virtual interfaces sharing the same phy for
which the event is received.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 23:03:23 +02:00
Jouni Malinen
ebd79f07c4 hostapd: Make hostapd_config::bss array of pointers
This makes it more convenient to move BSS configuration entries between
struct hostapd_config instances to clean up per-BSS configuration file
design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:21 +02:00
Jouni Malinen
7617388ea3 Interworking: Report STATUS:sp_type even if domain is not configured
This allows sp_type={home,roaming,unknown} to be used to determine
network type with SIM-based credentials even if the domain name
parameter is not configured explicitly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 13:57:02 +02:00