Commit graph

82 commits

Author SHA1 Message Date
Brian Norris
07aac648a1 tests: dbus: Add test for RemoveAllNetworks while connected
This likely passes today (at least without ASAN), but without the next
commit, it trips up a use-after-free bug, which ASAN can catch.

So consider this a regression test.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:36:18 +03:00
Brian Norris
4dbba548ae tests: Skip busctl tests when not available
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:31:43 +03:00
Jouni Malinen
48aebcc31b tests: D-Bus Roam
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-10-10 20:15:34 +03:00
Jouni Malinen
b2a1424659 tests: Empty network profile parameters will be valid
Remove this part of the dbus_network test case since it would be causing
failures after wpa_supplicant is modified to accept empty strings
through D-Bus.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-09 16:50:36 +03:00
Jouni Malinen
21cf2c5baf tests: Skip more tests based on missing TKIP support
This makes it more convenient to run tests with builds that disable
TKIP/WPA(v1) support completely.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-17 23:51:58 +03:00
Jouni Malinen
e9d2cd71af tests: Scanning in AP mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-15 21:22:47 +02:00
Jouni Malinen
cf28cfc12e tests: D-Bus MACAddressRandomizationMask property Get/Set
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-10-27 19:50:22 +02:00
Jouni Malinen
6541b9dbe7 tests: Avoid confusing "DETACH failed" exception prints in D-Bus tests
dbus_p2p_go_neg_init, dbus_p2p_group_idle_timeout, and
dbus_p2p_group_termination_by_go could end up print a "DETACH failed"
exception as a warning from WpaSupplicant.__del__ for the dev1 instance
used within the TestDbusP2p class. This did not cause the test cases to
fail, but the output is a bit confusing, so clean this up be explicitly
closing the control interface monitor sockets and furthermore by
ignoring the "DETACH failed" exception within __del__.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 20:13:28 +03:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
c37ef330d0 tests: MAC address ASCII string generation in python3 compatible manner
Use struct.unpack() to get a list of int and then generate a list of
hexstr octets from it for ':'.join() to get consistent behavior for both
python2 and python3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:35 +02:00
Masashi Honma
b723b25926 tests: Replace dict.has_key() with the in operator for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-04 12:26:35 +02:00
Jouni Malinen
5c9ba3412d tests: python3 compatible way of importing gobject for D-Bus testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:34 +02:00
Masashi Honma
e1810300c9 tests: Replace str.decode('hex') with binascii.unhexlify() for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:34 +02:00
Masashi Honma
15dfcb69df tests: Use 'b' prefix to mark Bytes literals explicitly for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:33 +02:00
Masashi Honma
7ab74770e7 tests: Convert binascii.hexlify() output to a string object for python3
This is needed in cases the hexlify() output is used to concatenate with
a string or used in string comparisons.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:33 +02:00
Masashi Honma
04fa9fc7fd tests: Decode Popen() output values for python3
Explicit conversion to str is needed here for python3 compatibility.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-04 12:26:33 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
6a94fdf21a tests: D-Bus P2P peer information - VSIE
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-02 13:00:57 +02:00
Jouni Malinen
345d8b5e91 tests: AP mode and D-Bus StationAdded/StationRemoved signals
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-23 17:25:11 +02:00
Jouni Malinen
a21eadcf58 tests: D-Bus introspection with busctl
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-24 18:30:41 +02:00
Lubomir Rintel
8b67f6496e tests: D-Bus Get/Set Pmf
Based on Jouni Malinen's [76055b4c6 "tests: D-Bus Get/Set Pmf"], modified
to use the correct "s" signature for the "Pmf" property.

Removed the negative test cases, because the synthesized property doens't
seem to do error checking upon being set.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:04:20 +02:00
Lubomir Rintel
b8d8928f6c Revert "tests: D-Bus Get/Set Pmf"
This is wrong. The Pmf property has a "s" signature.

This reverts commit 76055b4c61.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Jouni Malinen
79467d74fd tests: Fix dbus_tdls_channel_switch with missing kernel support
Check driver capabilities in the D-Bus TDLS case similarly to the
non-D-Bus cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-15 00:38:13 +03:00
Jouni Malinen
e51e49fccc tests: Fix dbus_set_global_properties failure if run twice
Clear the model_name parameter back to the default (empty string) at the
beginning and the end of dbus_set_global_properties to avoid failures if
the test case is run multiple times.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:41:57 +02:00
Jouni Malinen
50d7cdedae tests: Make dbus_p2p_discovery more robust
Ignore any unexpected deviceLost event before the peer devices has been
discovered. This works around issues where the previous test case
terminates before the D-Bus events have been fully delivered. This could
happen, e.g., when running dbus_p2p_discovery twice in a row.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:21:05 +02:00
Jouni Malinen
f41f04d04c tests: Make dbus_scan_abort more robust
There was a race condition on the sequence where iface.AbortScan() is
immediately followed by iface.Scan(). If the driver event
(NL80211_CMD_SCAN_ABORTED) arrived after the following new scan request,
the D-Bus operation failed. This is not what this test case is trying to
check, so wait for an indication of the previous scan having terminated
properly before issuing the next scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-20 15:37:58 +03:00
Jouni Malinen
504c7ffd69 tests: D-Bus mesh signals and properties
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-09-10 01:39:37 +03:00
Jouni Malinen
82aea622e8 tests: D-Bus methods for setting TDLS channel switching
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-05-07 22:08:43 +03:00
Jouni Malinen
0238e8ba4c tests: D-Bus scan trigger and abort
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-05-07 22:08:43 +03:00
Jouni Malinen
76055b4c61 tests: D-Bus Get/Set Pmf
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:28:25 +02:00
Jouni Malinen
db98b58736 tests: Remove trailing whitespace
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:31:42 +02:00
Jouni Malinen
4e6bd66744 tests: Additional D-Bus WPS Get/Set properties
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-23 21:28:43 +02:00
Jouni Malinen
6c44d97b04 tests: D-Bus P2P discovery on a specific non-social channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-19 13:18:05 +02:00
Jouni Malinen
3301e925b7 tests: Make dbus_p2p_go_neg_init more robust
It was apparently possible to get a propertiesChanged event from an
earlier test case with an empty Groups property. That ended up this case
exiting immediately before running through the steps and consequently,
failing due to missed operations. Make this less likely to happen by
accepting the Groups property emptying event only after a group has been
added for a peer first.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
afe280539b tests: D-Bus P2P and IP address parameters
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-21 14:45:13 +02:00
Jouni Malinen
73ece491c1 tests: D-Bus GetAll wpa_config_get_all() OOM
This is a regression test for a crash on wpa_config_get_all() error
path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:56 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
e7d454bb76 tests: D-Bus DeviceFoundProperties signal
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:59 +03:00
Jouni Malinen
20c7d26f80 tests: More wpa_supplicant/bss.c OOM coverage
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 20:41:09 +03:00
Janusz Dziedzic
afc26df29c tests: Pass full apdev to add_ap() function (4)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (4) converts the cases that call hostapd.add_ap() from a
helper function that got apdev[i] as an argument.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:12 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
dbd183c717 tests: D-Bus AssocStatusCode
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-06 20:54:16 +02:00
Jouni Malinen
be90370bd5 tests: Fix wpas_ctrl_country and dbus_country with valid db.txt
init=CORE was previously used due to invalid db.txt data for 00. For
now, allow both it and the new init=USER after fixed db.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:45:30 +02:00
Jouni Malinen
1d32bc2c1c tests: Make dbus_wps_oom more robust
It was possible for the BSSs object property change signal to be
generated during the OOM test case for Get(). If that happened, the
signal was not sent out, but the following Get(BSSs) operation succeeded
unexpectedly which resulted in a test failure. Make this less likely to
happen by waiting 50 ms between the scan and Get(BSSs) operation. This
should be sufficient to cover most cases since wpa_supplicant uses 5 ms
timeout for D-Bus property changed updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:10:06 +02:00
Jouni Malinen
ce96e65cb7 tests: D-Bus vendor element operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:41 +02:00
Jouni Malinen
089e7ca372 tests: Skip dbus_connect_eap if altsubject_match is not supported
This test case fails with the current internal TLS client implementation
since the needed altsubject_match parameter is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:57:26 +02:00
Jouni Malinen
845d48c133 tests: Make dbus_p2p_group_idle_timeout more robust
This test case was failing if a PropertiesChanged signal for P2P peer
gets delivered from a previous test case. Avoid that by waiting for the
new group to be formed before processing any PropertiesChanged signals.

This failure was triggered by the following test case sequence:
dbus_p2p_two_groups dbus_p2p_group_idle_timeout

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 21:28:49 +02:00
Jouni Malinen
89a79ca2b9 tests: Force hw capability re-fetch at the end of dbus_connect_oom
This is needed since the forced OOM may have forced the cached
information to be invalid or dropped. This issue was hit with the
following hwsim test case sequence:
ap_interworking_scan_filtering fst_sta_config_llt_large dbus_connect_oom
wpas_ctrl_enable_disable_network

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Jouni Malinen
1992af115a tests: D-Bus P2P and InvitationReceived
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-17 19:50:34 +02:00
Jouni Malinen
2299b54383 tests: D-Bus SaveConfig
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-15 19:08:05 +02:00