Commit graph

1084 commits

Author SHA1 Message Date
Jouni Malinen
a69d0cdc72 tests: Merge grpform_cred_ready_timeout test cases into a single one
These test cases had a long 120 seconds wait for the GO Negotiation
initiator to time out. This can be done using two devices in parallel to
save two minutes from total test execution time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 15:54:30 +02:00
Jouni Malinen
9be2b811d4 tests: Mesh max peering limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:53:02 +02:00
Jouni Malinen
4b9481bcd8 tests: Remove unnecessary wrap_wpas_mesh_test() complexity
This function did not seem to do anything else apart from making it less
obvious that hwsim_utils.test_connectivity() is called.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:52:54 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Jouni Malinen
5554fbef46 tests: Make parallel VM start a bit more resource friendly
Wait one second between each kvm start to avoid hitting large number of
processes trying to start in parallel. This allows the VMs to be started
more efficiently for parallel-vm.py runs with large number of VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 22:04:54 +02:00
Jouni Malinen
b3f4134912 tests: Clear cfg80211 BSS table at the end of scan_hidden
It was possible for the hidden SSID entry to leak into following test
cases and result in failures, e.g., in this sequence:

scan_hidden
scan_reqs_with_non_scan_radio_work
radius_auth_unreachable
wep_open_auth

BSS <BSSID> picked incorrect BSS entry within wpa_supplicant due to the
old zero-length SSID showing up from the earlier hidden SSID case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 21:58:47 +02:00
Jouni Malinen
2ffbf34db0 tests: Optimize test case execution order for multiple VMs
Move test cases with long duration to the beginning as an optimization
to avoid last part of the test execution running a long duration test
case on a single VM while all other VMs have already completed their
work.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 18:20:15 +02:00
Jouni Malinen
01c87519a3 tests: Do not mark proxyarp_open failed if ebtables is not available
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:14:00 +02:00
Jouni Malinen
f24489d94f tests: Use new scripts for vm-run.sh codecov
Now there is only one set of commands to maintain. The separate reports
for individual components have not been of much use in the past, so they
are dropped for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:41:59 +02:00
Jouni Malinen
cb0555f7be tests: EAP-IKEv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:16:26 +02:00
Jouni Malinen
f41f670ea5 tests: ERP with EAP-IKEv2
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 23:48:53 +02:00
Jouni Malinen
f1381f99e4 tests: Mesh ht_mode options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:27:22 +02:00
Jouni Malinen
f86868c253 tests: wdev_id in STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:18:26 +02:00
Jouni Malinen
542452a93d tests: hostapd behavior with interface in different bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:01:31 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
6343f24d35 tests: IBSS cfg80211 workarounds
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:36:41 +02:00
Jouni Malinen
cece9b7df7 tests: Dynamic BSS add operation reusing existing interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:04:18 +02:00
Jouni Malinen
8916857da6 tests: TDLS with VHT
This adds some more coverage, but the TDLS setup is not for VHT due to
missing support in mac80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
4466fe6541 tests: VHT and 40 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
d4d80e9a14 tests: SMPS AP configuration options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
598555c7e8 tests: IEEE 802.1X with static WEP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
1e7528298a tests: cfg80211 scan-for-auth workaround with WEP keys
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:28:53 +02:00
Jouni Malinen
a5687274e1 tests: cfg80211 scan-for-auth workaround failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:22:18 +02:00
Jouni Malinen
b97a7bf672 tests: Large number of BSS add operations with hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:13:00 +02:00
Jouni Malinen
863a54093d tests: rfkill block prior to wpa_supplicant start
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 16:46:39 +02:00
Jouni Malinen
d92da8a23e tests: Radar detection on non-HT and on HT40- channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:50:19 +02:00
Jouni Malinen
cac5526390 tests: Report ROAM failure in pmksa_cache_opportunistic_multiple_sta
There is no need to wait for the timeout if the ROAM command itself
failed. This could happen if an earlier test case had left hidden SSIDs
in the cfg80211 BSS table.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:37:08 +02:00
Jouni Malinen
1264b68355 tests: Clear cfg80211 scan results after wext_hidden
Leaving hidden SSIDs in the cfg80211 BSS table can result in errors in
the following test cases, so use special care to clear all BSS entries
at the end of the wext_hidden test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:36:01 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
e0cccf26a4 tests: Add --codecov support to parallel-vm.py
This allows code coverage report to be generated must faster with the
help of parallel VMs executing test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 01:24:28 +02:00
Jouni Malinen
42ce1a27e0 tests: Connection with large number of scan_ssid=1 network blocks
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:30:58 +02:00
Jouni Malinen
ed930f064c tests: P2P_LISTEN and scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:17:06 +02:00
Jouni Malinen
558ac77c58 tests: setband and scans
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:08:10 +02:00
Jouni Malinen
7749b1c982 tests: Additional coverage for filter_ssids=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:26:07 +02:00
Jouni Malinen
91cc6f918a tests: AP_SCAN 2 operation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:08:58 +02:00
Jouni Malinen
83e80d32f1 tests: SCAN requests while in non-scan radio work
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-19 15:23:07 +02:00
Jouni Malinen
7c5c1ba7b4 tests: P2P_LISTEN behavior with offchannel TX
This verifies that offchannel TX (PD in this specific case) does not
stop ongoing long P2P_LISTEN operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
89cd4355bb tests: Fix proxyarp_open IPv4-from-bridge
There were couple of typos in the IP addresses and there was no coverage
for the normal unicast ARP response from the bridge (since non-wireless
device does not get proxied by the AP). In addition, it is better to
change the IP address used here to be unique to make the sniffer logs
easier to interpret.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-18 16:41:40 +02:00
Jouni Malinen
6d5332948c tests: Use send_ns() helper for the earlier proxyarp_open NS packets
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
40e4c9c8b0 tests: Add traffic test to proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
5a3ce80265 tests: ProxyARP behavior with IPv6 frames
This adds transmission of number of NS/NA frames to test ProxyARP
behavior. The actual validation of the AP behavior is still manual,
i.e., a separate inspectation of the capture files is needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
19cbe06238 tests: Add ebtables rules for ProxyARP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
a95c6973aa tests: Use non-promiscuous mode and packet-buffered tcpdump capture
This helps in avoiding truncated capture files in the proxyarp_open test
case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
1d0b5a04e6 tests: Dump monitor messages before hwsim_utils test
This may be needed in some corner cases where broadcast frames with two
associated stations are received by both devices.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
db1d66d879 tests: Fix wifi_display_persistent_group event checks
The final invitation case in this test was verified incorrectly. The GO
was already operatign in that case, so there was not supposed to be a
new P2P-GROUP-STARTED message from GO. That happened to be show up in
the pending event messages from the last instance, but that was just by
accident and any additional dump_monitor() operation added here would
cause this test to fail. Fix this by handling the final invitation
separately and verifying that only the client side indicates
P2P-GROUP-STARTED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
c8836a4f03 tests: Allow dump_monitor() to be used without global monitor interface
It is possible for WpaSupplicant instance to be used without the global
control socket, so allow dump_monitor() to handle this case cleanly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:01:41 +02:00
Jouni Malinen
9d7fdac5b3 tests: Try to clear scan results after regulatory domain changes
It was possible for regulatory domain changes to "leak" into following
test cases in number of cases where the cfg80211 BSS table remained
after regulatory domain had been restored to world roaming. Try to make
this less likely to occur by explicitly clearing BSS table at the end of
test cases that use different regulatory domain. This makes P2P test
cases that verify channel selection based on world roaming rules more
robust.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:32:01 +02:00
Jouni Malinen
970a23f665 tests: Make flush_scan_cache() more robust
It was possible for BSS entries on the scanned channel (2412 MHz) to be
left behind after flush_scan_cache() call. Use a less likely channel
2417 MHz as the default channel to scan. This will hopefully get rid of
most problematic BSS entries from previous test cases. For example,
ap_hs20_oen followed by ap_hs20_random_mac could fail due to
INTERWORKING_CONNECT seeing non-RSN scan result from the previous test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:13:03 +02:00
Jouni Malinen
d48b64ba6c tests: Use helper function for adding open mesh network
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:34:43 +02:00
Jouni Malinen
7e3614df5c tests: Mesh with dynamic interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:28:36 +02:00