Commit graph

975 commits

Author SHA1 Message Date
Jouni Malinen
a5c43328d9 tests: Additional GET_CAPABILITY coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
80cb463463 tests: SAVE_CONFIG error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
76b7694177 tests: Multiple networks and cred removal
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
8c020b0f05 tests: Additional DUP_NETWORK coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
146374019a tests: Add missing test descriptions
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
5e2a8ec9e7 tests: wpa_supplicant ctrl_iface mesh command error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
d463c5566f tests: Additional coverage for SCAN_RESULTS and BSS entry flags
This increases wpa_supplicant_ie_txt(), print_bss_info(), and
wpa_supplicant_ctrl_iface_scan_result() testing coverage to include the
previously missing key management options.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
feb795d6d3 tests: wpa_supplicant ctrl_iface BSSID command error case
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
061c55a232 tests: Check STATUS mode field during P2P group formation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
67966089a6 tests: wpa_supplicant ctrl_iface CTRL-RSP-
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
ed685e43ab tests: IBSS_RSN control interface command
This verifies that IBSS_RSN <peer> return OK for the case where a valid
and already connection peer address is given.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
8e33f9c67f tests: wpa_supplicant WPS_AP_PIN random PIN timeout and error caes
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
1490eff500 tests: More coverage for WPS NFC error and uncommon cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
e946c8e682 tests: Fix a typo in an error message
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:07:56 +02:00
Jouni Malinen
b54f697019 tests: Remove test names from VM command with parallel-vm.py
There is no need to pass the test case names to the VMs when using
parallel-vm.py. Removing those from the command line helps in avoiding
kernel panic if maximum number of kernel parameters limit is hit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-07 15:33:22 +02:00
Jouni Malinen
2f816c212c tests: Optimize FT test cases
Use single channel scan instead of full scan to save time. In addition,
use EAP-GPSK which takes significantly less CPU that EAP-EKE with
default parameters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 17:12:30 +02:00
Jouni Malinen
c337d07a1b tests: FT_DS with unknown target
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 17:05:46 +02:00
Jouni Malinen
7fd5fd03ac tests: TDLS teardown using wildcard address
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:56:14 +02:00
Jouni Malinen
e61f90875b tests: Disabling WNM keep-alive and hostapd doing client poll
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:51:21 +02:00
Jouni Malinen
19ef208640 tests: wpa_supplicant ctrl_iface SET operations
This adds more test coverage for wpa_supplicant SET ctrl_iface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:29:08 +02:00
Jouni Malinen
556408940e tests: SET disallow_aps in P2P GO mode
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:21:10 +02:00
Jouni Malinen
c1e33588b8 tests: Optimize WFD connect_cli() calls
There is no need to run full scan in these test cases, so use single
channel scan to save time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 15:47:21 +02:00
Jouni Malinen
f8fee78879 tests: WFD_SUBELEM_SET/GET with all parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 15:47:20 +02:00
Jouni Malinen
ceb767d501 tests: More coverage for WMM-AC
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 14:08:24 +02:00
Jouni Malinen
acc9a635c8 tests: EAP Re-authentication Protocol (ERP)
This tests RP EAP-Initiate/Re-auth-Start transmission, ERP key
derivation, and EAP-Initiate/Re-auth + EAP-Finish/Re-auth exchange and
rMSK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-04 12:16:29 +02:00
Jouni Malinen
8201054da6 tests: Huge number of network blocks and LIST_NETWORKS LAST_ID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-02 23:47:34 +02:00
Jouni Malinen
c7f35a9e96 tests: Make scan_for_auth more robust
It was apparently possible for this test case not to do what it was
supposed to do, i.e., get nl80211 Authenticate command failing due to
cfg80211 BS entry missing. With the external radio work blocking fixed,
this can be cleaned up by explicitly waiting for the scan event. In
addition, a less used channel can be selected to avoid finding other BSS
entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 20:17:08 +02:00
Jouni Malinen
243dcc4ae4 tests: Add a helper function for clearing scan cache
This makes it more convenient and consistent to clear the cached scan
results from cfg80211 and wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 12:20:53 +02:00
Jouni Malinen
6ef319f4ea tests: AddressSanitizer (ASan) build options
Add example build options that can be used to enable ASan for hwsim test
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-30 15:53:11 +02:00
Jouni Malinen
faa907389b tests: Stop connection at the end of monitor_iface_unknown_sta
Do not leave the station trying to connect at the end of the test case
since that can have an effect to the following test case. Such sequences
should be tested in test cases that are specifically designed for that
rather than randomly between test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-30 15:53:11 +02:00
Jouni Malinen
ee27f6737b tests: Increase WEXT coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-30 01:05:44 +02:00
Jouni Malinen
dc4c3dc4a2 tests: Simplify Michael MIC test file writing
Since run-tests.py is now required to run as root, there is no need to
use the somewhat awkward "sudo tee" construction; instead, just write
directly to the file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-30 01:05:39 +02:00
Jouni Malinen
ae13ad6413 tests: Make go_neg_with_bss_on_disallowed_chan more robust
Clear scan results to avoid PBC overlap issues caused by earlier test
cases. For example, go_neg_with_bss_connected followed by
go_neg_with_bss_on_disallowed_chan resulted in failure before this
change.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 15:22:43 +02:00
Jouni Malinen
8969bad521 tests: Monitor interface with hostapd
This increases testing coverage for nl80211 AP mode with monitor
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 13:33:50 +02:00
Jouni Malinen
73a2f82887 tests: Increase retry limit and timeout for wpas_mesh_open_no_auto
This test case was failing every now and then due to dev1
(no_auto_peer=1) not receiving the new-peer-candidate event in time
before dev0 has already stopped retries on mesh peering open message.
This sounds somewhat expected with the default 4 * 40 ms = 160 ms
retries and 1000 TU beacon interval. Use maximum timeout 16 * 255 ms =
4080 ms to make this test case less likely to fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Jouni Malinen
d9fee38658 tests: P2P invitation resend on no-common-channels
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Jouni Malinen
cff6eed75b tests: Re-enable wext_open
driver_wext.c is again able to configure open network, so re-enable the
test case for it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Johannes Berg
b67cdbc162 tests: Allow wext in configuration
Both the wpa_supplicant and kernel configuration need wext to
run the wext testcase, enable those in the default/example
configurations.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
ee3f9f3837 tests: Optimize autogo test cases by removing unnecessary scans
Keep full channel scans in autogo for test coverage, but use single
channel scan in all other autogo* test cases to remove unnecessary
waiting that does not add any test coverage. This removes more than one
minute from the total test execution time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
5a631ad2c2 tests: Optimize ap_open_unexpected_assoc_event
Replace fixed sleep with waiting for a disconnection event. In addition,
remove unnecessary use of sudo.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
2005cb87e5 tests: Hide unnecessary wlantest_cli output
Unnecessary and confusing "OK" output from wlantest_cli got sent to
stdout.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
e4d7b5134e tests: Move hessid and access_network_type reset to test case
This removes unnecessary reset() steps from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
47dcb1186f tests: Move external_sim reset to test cases that change this
This removes unnecessary reset() step from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
a0559aa5ba tests: Make go_neg_forced_freq_diff_than_bss_freq more robust
It was possible for this test case to fail due to PBC overlap that was
detected based on previous test case having used PBC. Make that false
positive less likely to happen by explicitly clearing the scan cache on
the device.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
6ea5e19898 tests: Fix p2p_channel_random_social_with_op_class_change cleanup
p2p_oper_reg_class and p2p_oper_channel need to be restored to 0, not an
arbitrary 2.4 GHz channel to avoid issues for following test cases. For
example, p2p_channel_random_social_with_op_class_change followed by
p2p_autogo_pref_chan_not_in_regulatory ended up with the latter test
case failing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
4b57af2aaa tests: Remove duplicated connectivity test from mesh
hwsim_utils.test_connectivity() is already bidirectional test, so there
is no need to run it twice with the devices swapped for the second
iteration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
882f894831 tests: Make hidden SSID test cases more robust
Clear wpa_supplicant and cfg80211 scan results at the end of hidden SSID
test cases to avoid potential issues for following test cases. For
example, ap_hs20_session_info could fail if executed immediately after
ssid_hidden due to the AP configuration change from open to RSN was not
noticed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
a712282bc1 tests: proxyarp with DHCP snooping
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
356a497d39 tests: ProxyARP with DGAF disabled and multicast-to-unicast conversion
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 22:41:26 +02:00
Jouni Malinen
67aeee118a tests: Convert proxyarp tests to use DATA_TEST_FRAME
This is more robust and extensible than configuring IPv6 addresses on
the interfaces and trying to use ping6 or some other external tools to
generate suitable IPv6 frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 20:00:14 +02:00