Commit graph

1328 commits

Author SHA1 Message Date
Johannes Berg
d0007ac9d7 tests: Add test to check disconnect in powersave
The kernel had two bugs (one in hwsim and one more important one in
mac80211) in this area, add a test to make sure we can disconnect
without any kernel issues while in powersave.

Also make sure that the TIM bit gets set and cleared again (by checking
with tshark.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-21 16:07:52 +02:00
Jouni Malinen
04bb845273 tests: Re-association to same BSS to toggle PMF status
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-19 16:37:12 +02:00
Jouni Malinen
4bcedaa400 tests: Re-sign expired test certificates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-19 14:18:57 +02:00
Jouni Malinen
792eafa047 tests: Make wpas_mesh_password_mismatch more robust
It seems to be possible for dev2 (the one with incorrect password) to
stop retries before either dev0 or dev1 reports the authentication
failure event. For now, allow the test case pass if either dev0 or dev1
reports the event rather than requiring both to report this. The
expected behavior can be fine-tuned in the future if the reporting
behavior is modified to be more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-12 15:50:52 +02:00
Jouni Malinen
f245b45075 tests: Fix ap_{open,wpa2_psk}_wpas_in_bridge cleanup
Due to a copy-paste error, these test cases left 4addr mode enabled on
wlan5. This resulted in number of connect_cmd_* test cases failing if
executed after the wpas_in_bridge tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:50:06 +02:00
Jouni Malinen
1c9838b388 tests: Remove temporary config file in wpas_config_file
The new wpa_supplicant configuration file writing style leaves behind
the temporary file (<filename>.tmp) if renaming fails. Clean that up in
the test case execution.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 14:57:30 +02:00
Jouni Malinen
eb88a5ba74 tests: hostapd and external ifconfig down + up
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 10:31:12 +02:00
Jouni Malinen
380f3a8ba1 tests: Make autogo_join_auto_go_neg more robust
This test cases used to fail if dev1 had seen dev0 as a GO in an earlier
test case, e.g., when running it after autogo_fail. Fix this by clearing
scan results on dev1 at the beginning of the test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 12:09:07 +02:00
Jouni Malinen
c5b535ed1d tests: hostapd and start_disabled=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 19:57:46 +02:00
Jouni Malinen
7ebc7e8fa6 tests: wpa_supplicant DUMP/GET global parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
2265376271 tests: INTERWORKING_ADD_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
9177b0a8c9 tests: Successful P2P_CONNECT-auto cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:59:57 +02:00
Jouni Malinen
d2b84e430c tests: P2P_CONNECT-auto not finding GO
This is a regression test for an earlier bug that resulted in using
freed memory after a P2P group interface was removed as part of
fallback-to-GO-Negotiation in P2P_CONNECT-auto.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:35:49 +02:00
Jouni Malinen
874057da4e tests: Make wpas_ctrl_many_networks more robust under valgrind
It is possible for a low powered CPU to take excessively long time to
delete 1000 network blocks when running under valgrind. This would have
resulted in the test case failing and the following reset operation
timing out which would then stop the test sequence completely.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
f77d6d4bd8 tests: Mesh authentication failure events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
a0b3f8e2ff tests: Remove forgottend debug print from p2ps_connect_adv_go_persistent
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-07 16:29:22 +02:00
Jouni Malinen
c62bd5e44d tests: Remove forgotten debug print from grpform_pbc_overlap
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-07 15:38:29 +02:00
Ilan Peer
d821e2f294 tests: Use the global control interface in test_nfc_p2p.py
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
David Spinadel
bbcbbd3701 tests: Modify autogo_bridge test to use group interface
1. Add get_group_ifname() to wpasupplicant.py
2. Use the function to get the interface name for the bridge.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
4ef05faf43 tests: Modify test_p2p_discovery to use global and group interfaces
Modify the tests in test_p2p_discovery to use the global
control interface and group interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
da749dc579 tests: Use the group control interface in p2p_channel_avoid
Use the group control interface to wait for P2P-REMOVE-AND-REFORM-GROUP
as the event is a group event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
d4f2ba749e tests: Use group control interface in autogo
P2P-PRESENCE-RESPONSE is a group event, and thus need
to use the group control interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
75826fc6e6 tests: Use global control interface in wpas_ctrl_global
Use the global control interface to set/get the status of the
P2P Device.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
b638f70316 tests: Replace subprocess.call for rm with os.remove()
There is no need to use sudo and external rm to remove files now that
run-tests.py is required to run as root.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
592015c3c1 tests: Fix wpas_config_file after implementation change
The new wpa_supplicant configuration writing design (rename instead of
write to original file) did not fail with the symlink-to-self case, so
replace this with the config file being replaced with a directory. In
addition, get rid of unnecessary use of subprocess since run-tests.py is
running as root nowadays.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
4cfc46934d tests: IBSS with WEP and TKIP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-06 21:43:50 +02:00
Jouni Malinen
65013c9331 tests: ACS with acs_chan_bias parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-06 18:02:33 +02:00
Ilan Peer
1cb3ad7362 tests: Use global control interface in test_p2p_concurrency
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
2a9eb1494c tests: Use global control interface in test_p2p_service
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
e9986d8b0b tests: Modify test_p2p_discovery to use global control interface
1. Modify discovery_stop to use global control interface when calling
   P2P_FLUSH.
2. Modify p2p_listen_and_offchannel_tx to use the global control
   interface when waiting for P2P PD event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Eliad Peller
a918e48af1 tests: Add printk tracer to trace-cmd
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-02-05 13:48:40 +02:00
Ben
d715738578 tests: Modify tests in test_ap_pmf to use own_addr()
Some of the tests used p2p_dev_addr() that can be different from
own_addr() if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
3d8c7953e3 tests: Modify tests in test_hapd_ctrl to use own_addr()
Some of the tests used p2p_dev_addr() that can be different from
own_addr() if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
1d21a5bee5 tests: Fix ap_wps_per_station_psk to use own_addr()
The test used p2p_dev_addr() that can be different from own_addr()
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
18945a8c8e tests: Fix ap_wpa2_psk_file to use own_addr
The test used p2p_dev_addr() that can be different from own_addr()
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Matti Gottlieb
83e1bab022 tests: Fix destination address in ap_hs20_remediation_required_ctrl
Fix the destination address that is sent in the WNM-Notification to be
the BSS address opposed to the P2P address.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
36f2818784 tests: Use get_bss() with ifname in autogo
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
fb9cf82eb3 tests: Add option to specify ifname to get_bss()
This is needed for cases that the group interface differs from the main
interface, i.e., when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
5270b2fbb7 tests: Use the global control interface in test_p2p_grpform
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:35 +02:00
Ilan Peer
c282b9b40e tests: Use global_request for SET commands in test_p2p_grpform
When the 'SET' command is used to configure parameters related to P2P
operation use the global control interface and not the per interface one
as otherwise the setting will only have effect on the interface and will
work if a dedicated P2P_DEVICE is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
cef63d6b2f tests: Update group ifname in p2p_go_invite_auth
Once the connection is established need to call group_form_result() on
the invited device, as otherwise the group interface name is not updated
and the connectivity test is done with the main interface instead of the
group interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
098a687ffb tests: Use global control interface in discovery_dev_id
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
acd620258d tests: Modify autogo_legacy to use the group interface
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
b0d697be91 tests: Use global control interface in wait_go_ending_session()
P2P_EVENT_GROUP_REMOVED is a global event, so use
wait_global_event() instead of wait_event().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 12:50:44 +02:00
Jouni Malinen
644b24c6bb tests: Verify SD TX callback processing after P2P find is stopped
These are far from perfect since timing is quite difficult to match for
the case that behaved incorrectly. Anyway, it looks loke
p2p_service_discovery_peer_not_listening was able to hit the error now
and then, so this should be sufficient as a regression test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-04 20:47:14 +02:00
Jouni Malinen
c4f34de90d tests: P2PS and persistent group
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 17:00:56 +02:00
Jouni Malinen
12a793a606 tests: Increase grpform_ext_listen coverage
Include actual extended listen period in the test and confirm that the
device was available on a social channel during such period by using
non-social operating channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:43:02 +02:00
Jouni Malinen
2acd2985c6 tests: P2P_PROV_DISC error case
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:30:27 +02:00
Jouni Malinen
9406905384 tests: P2P listen channel optimization
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:22:59 +02:00
Jouni Malinen
2e6085c27b tests: OBSS scanning report processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 13:26:27 +02:00
Rajiv Ranjan
5095a6b6fc tests: P2P services
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:42:24 +02:00
Jouni Malinen
364e28c982 tests: Restore p2ps config_method in dbus_get_set_wps
This test case is modifying the list of enabled config_method values and
needs to restore "p2ps" option that is included by default. Without
this, P2PS executed after dbus_get_set_wps could fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Jouni Malinen
f4cd0f6454 tests: EAP-PEAP/MSCHAPv2 password failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-01 17:37:35 +02:00
Jouni Malinen
54f2cae2e6 tests: Make *_key_lifetime_in_memory more robust
It was possible for the GTK-found-in-memory case to be triggered due to
a retransmission of EAPOL-Key msg 3/4 especially when running test cases
under heavy load (i.e., timeout on hostapd due to not receiving the 4/4
response quickly enough). Make this false failure report less likely by
waiting a bit longer after the connection has been completed before
fetching the process memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 18:06:06 +02:00
Jouni Malinen
a1512a0cc7 tests: wpa_supplicant and station interface in a bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 17:28:08 +02:00
Jouni Malinen
db5f6b2ca3 tests: RSN pre-authentication OOM in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:45:52 +02:00
Jouni Malinen
7afa678033 tests: RSN pre-authentication timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:35:31 +02:00
Jouni Malinen
d2432b8b7e tests: PMKSA cache size limit in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:26:46 +02:00
Jouni Malinen
19879b4572 tests: Invalid NFC NDEF record handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 02:00:02 +02:00
Jouni Malinen
55c430b63c tests: Add capture file validation for IPv6 in proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 21:55:46 +02:00
Jouni Malinen
efd0a6fbf1 tests: Add capture file validation for IPv4 in proxyarp_open
Verify that the expected frames were seend and unexpected frames
weren't.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
210a4f6a13 tests: Add another bridge port to proxyarp_open
Use another AP instance as a separate bridge port in the proxyarp_open
test cases to increase testing coverage for kernel proxyarp
functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
87f0ede914 tests: Add brctl showmacs output to proxyarp_open test cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
9934ee1967 tests: Run the proxyarp_open test case both with and without ebtables
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
2076846cc4 tests: Fix tshark refactoring
Commit 2e1d7386e2 ('tests: Refactor tshark
running') added a helper function for running tshark. However, it did
not use the filter argument correctly, added an extra -Tfields on the
command line, and failed to use global variable. In practice, this ended
up disabling all the tshark sniffer checks. Fix that by using the filter
argument from the caller and marking the _tshark_filter_arg global.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
3a4bace428 tests: RADIUS server changing VLAN ID assignment
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 01:11:56 +02:00
Jouni Malinen
3b86e9d52c tests: PMKSA caching OOM error cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 00:14:57 +02:00
Jouni Malinen
915135e055 tests: hostapd OOM loop tests for WPA2-PSK and WPA2-EAP connection
These verify number of previously uncovered error paths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 22:33:25 +02:00
Jouni Malinen
cdebd24db6 tests: OLBC AP table error cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 21:11:41 +02:00
Jouni Malinen
496a7a6ff9 tests: hostapd OOM loop targeting RADIUS accounting
The hostapd_oom_wpa2_eap test case did not always catch these code
paths, so add a variant of that test case explicitly targeting RADIUS
functions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 20:52:30 +02:00
Jouni Malinen
2c528e9690 tests: cfg80211 DEL_STATION issued externally to hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 16:26:31 +02:00
Jouni Malinen
4a4cd04cad tests: RADIUS MAC ACL and accounting enabled
This ends up using the special User-Name = STA MAC address case for
Accounting-Request. In addition, add Chargeable-User-Identity for one of
the STAs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 15:55:48 +02:00
Jouni Malinen
ef318402f6 tests: EAP-MSCHAPv2 server out-of-memory cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 16:17:25 +02:00
Jouni Malinen
95a15d793e tests: EAP-GTC server error cases
In addition, no-password-configured coverage extended to EAP-MD5 and
EAP-MSCHAPv2 as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 15:59:36 +02:00
Jouni Malinen
467775c5ac tests: Pending EAP peer processing with VENDOR-TEST
This extends the VENDOR-TEST EAP method peer implementation to allow
pending processing case to be selected at run time. The
ap_wpa2_eap_vendor_test test case is similarly extended to include this
option as the second case for full coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-28 13:09:31 +02:00
Jouni Malinen
a08fdb17aa tests: EAPOL supplicant invalid frame handling
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 13:09:31 +02:00
Jouni Malinen
48bb2e68c0 tests: STATUS-VERBOSE
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 13:09:31 +02:00
Jouni Malinen
37551fe374 tests: Suite B 192-bit profile
This adds a Suite B test case for 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
4113a96bba tests: Complete Suite B 128-bit coverage
Enable BIP-GMAC-128 and enforce Suite B profile for TLS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
f918b95b9d tests: Fix ft_psk_key_lifetime_in_memory with new PTK derivation debug
PTK is not printed out anymore as a single entry, so fetch KCK, KEK, and
TK separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
287eb3f9d7 tests: Group management frame cipher suites
This extends testing coverage of PMF group management cipher suites to
include all the cases supported by the driver (existing BIP =
AES-128-CMAC and the new BIP-GMAC-128, BIP-GMAC-256, BIP-CMAC-256).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
fba25c99a5 tests: Make ap_wps_er_pbc_overlap more robust
Reorder scanning in a way that allows the ER behavior to be more
predictable. The first Probe Request report is for a previously received
frame on the AP and this new sequence avoids leaving either of the PBC
test STAs to be that one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-23 00:52:56 +02:00
Jouni Malinen
90ad11e625 tests: Make active scans more robust
This makes testing under very heavy load or under extensive kernel
debugging options more robust by allowing number of test cases to scan
multiple times before giving up on active scans. The main reason for
many of the related test failures is in Probe Response frame from
hostapd not getting out quickly enough especially when multiple BSSes
are operating.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-23 00:52:40 +02:00
Jouni Malinen
1f53fe0310 tests: P2P group formation using PBC multiple times in a row
This verifies that PBC session overlap detection does not get indicated
when forming the group with the same peer multiple times.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 20:53:03 +02:00
Jouni Malinen
180a858f76 tests: P2P_SERV_DISC_CANCEL_REQ during query
This is a regression test case for a specific sequence that could result
in wpa_supplicant NULL dereference when a SD request is cancelled before
the SD Request TX status callback has been processed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 15:55:36 +02:00
Jouni Malinen
a60dbbce44 tests: ANQP-QUERY-DONE event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-20 02:26:21 +02:00
Jouni Malinen
31b7ecb6c8 tests: P2P NFC invitiation with driver using cfg80211 P2P Device
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-20 01:57:59 +02:00
Jouni Malinen
2dc18e9a26 tests: Error handling for scan trigger failure cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-19 20:25:22 +02:00
Jouni Malinen
e60be3b3d4 tests: WPS registrar learning configuration from WPA+WPA2 AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-19 18:39:13 +02:00
Jouni Malinen
059bcc4782 tests: Increase hostapd out-of-memory loop coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-19 02:35:43 +02:00
Jouni Malinen
214457de15 tests: WPA + WEP configuration getting rejected
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-19 01:11:36 +02:00
Jouni Malinen
9eadcfbf06 tests: Add step-by-step guide for setting up test framework
This set of notes provides information on how virtual guess OS can be
used to run the mac80211_hwsim test cases under any host OS. The
specific example here uses Ubuntu 14.04.1 server as the starting point
and lists the additional packages that need to be installed and commands
that can be used to fetch and build the test programs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 18:11:11 +02:00
Jouni Malinen
a66d2248a0 tests: Close wlan5 control interface monitor more explicitly
There were couple of common cases where the control interface for the
dynamic wpa_supplicant instance could have been left in attached state
until Python ends up cleaning up the instance. This could result in
issues if many monitor interface events were queued for that attached
socket. Make this less likely to cause issues by explicitly detaching
and closing control interfaces before moving to the next test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 17:13:55 +02:00
Jouni Malinen
7f08b2f91d tests: Make WNM Sleep Mode tests more robust
It was possible for the Action frame used for entring WNM Sleep Mode to
get dropped on the AP side due to it arriving prior to having processed
EAPOL-Key message 4/4 due to a race condition between Data and
Management frame processing paths. Avoid this by waiting for
AP-STA-CONNECTED event from hostapd prior to trying to enter WNM Sleep
Mode. In addition, make the check for the STA flag change more robust by
allowing the wait to be a bit longer with a loop that terminates as soon
as the flag has changed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 15:58:05 +02:00
Jouni Malinen
7cc9a81f1e tests: Make PMKSA caching tests more robust
When the STA is forced to disconnect immediately after completion of
4-way handshake, there is a race condition on the AP side between the
reception of EAPOL-Key msg 4/4 and the following Deauthentication frame.
It is possible for the deauthentication notification to be processed
first since that message uses different path from kernel to user space.

If hostapd does not receive EAPOL-Key msg 4/4 prior to deauthentication,
no PMKSA cache entry is added. This race condition was making the test
cases expecting PMKSA caching to work to fail every now and then. Avoid
this issue by waiting for AP-STA-CONNECTED event from hostapd. This
makes sure the PMKSA cache entry gets added on the AP side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 15:47:56 +02:00
Jouni Malinen
d4155eb78a tests: Add some more time for olbc_ht update in olbc_5ghz
It looks like this test case is failing every now and then, so add some
more time for the olbc_ht value to get updated before reporting a
failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:55:49 +02:00
Jouni Malinen
b4de353c85 tests: Import gobject in a way that allows failures
It looks like the gobject module does not get installed by default for
Python at least on Ubuntu server, so modify the D-Bus test case files to
import this in a way that allows other test cases to be run even without
gobject module being installed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
57f08b3f3a tests: Make ap_anqp_sharing more robust
This test case uses get_bss() with a BSSID to find a BSS entry. That can
result in failures if there are multiple BSS entries in wpa_supplicant
BSS table for the same BSSID, e.g., due to an earlier hidden SSID test
case. Explicitly clear the cfg80211 and wpa_supplicant scan caches at
the beginning of this test case to make it less likely for earlier test
cases to trigger a failure here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
296186c006 tests: Make ap_mixed_security more robust
This test case uses get_bss() with a BSSID to find a BSS entry. That can
result in failures if there are multiple BSS entries in wpa_supplicant
BSS table for the same BSSID, e.g., due to an earlier hidden SSID test
case. Explicitly clear the cfg80211 and wpa_supplicant scan caches at
the beginning of this test case to make it less likely for earlier test
cases to trigger a failure here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00