Commit graph

4625 commits

Author SHA1 Message Date
Jouni Malinen
954c535a50 DPP: Update wpa_supplicant configuration file after provisioning
WPS was already doing this if update_config=1 was set and DPP should be
consistent with that behavior. Update the configuration file if
update_config=1 and dpp_config_processing is set to 1 or 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 16:21:54 +02:00
Jouni Malinen
339dc8bd6b WPS: Allow SAE configuration to be added automatically for PSK
The new wpa_supplicant configuration parameter wps_cred_add_sae=1 can be
used to request wpa_supplicant to add SAE configuration whenever WPS is
used to provision WPA2-PSK credentials and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and also with PMF enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:49 +02:00
Jouni Malinen
fd83089120 SAE: Reuse previously generated PWE on a retry with the same AP
Do not start SAE authentication from scratch when the AP requests
anti-clogging token to be used. Instead, use the previously generated
PWE as-is if the retry is for the same AP and the same group. This saves
unnecessary processing on the station side in case the AP is under heavy
SAE authentiation load.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 13:07:11 +02:00
Jouni Malinen
a9fe13035e SAE: Enable only groups 19, 20, and 21 in station mode
Remove groups 25 (192-bit Random ECP Group) and 26 (224-bit Random ECP
Group) from the default SAE groups in station mode since those groups
are not as strong as the mandatory group 19 (NIST P-256).

In addition, add a warning about MODP groups 1, 2, 5, 22, 23, and 24
based on "MUST NOT" or "SHOULD NOT" categorization in RFC 8247. All the
MODP groups were already disabled by default and would have needed
explicit configuration to be allowed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-05 17:23:58 +02:00
Lubomir Rintel
611308365e defconfig: Enable IEEE 802.11w management frame protection (wpa_supplicant)
NetworkManager can use these if available and the distros generally
enable this already.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
9515fa9250 defconfig: enable IEEE 802.11r fast BSS transition (wpa_supplicant)
Generally useful. Linux distros already enable these, upcoming
NetworkManager will support it too.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
6b7a0da75b defconfig: Enable IEEE 802.11n and 802.11ac (wpa_supplicant)
I guess there's no reason anyone with capable hardware wouldn't want to
enable these. Debian and Fedora aleady do.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
467004d632 defconfig: Enable Hotspot 2.0 (wpa_supplicant)
Generally useful, Debian enables this. Other distros should too.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
ec52faa2b2 defconfig: Enable RSN on IBSS networks (wpa_supplicant)
Fedora and Debian enable this. NetworkManager actually rejects such
configurations citing kernel bugs, but that actually might not be the
right thing to do anymore.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Jouni Malinen
67d99d2e07 defconfig: Remove obsolete notes about OpenSSL requirements for EAP-FAST
OpenSSL 0.9.8 reached its end-of-life long time ago, so remove these old
notes about need of a newer OpenSSL version for EAP-FAST since all
current OpenSSL versions include the needed functionality.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
eafc5fec22 defconfig: Enable a handful of EAP methods (wpa_supplicant)
Fedora uses AKA, FAST, GPSK_SHA256, GPSK, IKEV2, PAX, SAKE and TNC. I
don't know why these in particular. AKA wouldn't work, because
CONFIG_PCSC is off anyways; let's enable all the other ones, and also
PWD (openSUSE enabled it because users demanded it).

Debian enables all of the above uses, but also PWD, AKA_PRIME, SIM, PSK
and EKE.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
f64050da02 defconfig: Enable logging to file and syslog (wpa_supplicant)
Debian and Fedora enable both and log to syslog. openSUSE seems to log
to a flat file instead.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:50 +02:00
Lubomir Rintel
ae5240db86 defconfig: Enable simple bgscan module (wpa_supplicant)
Generally useful. Linux distros enable this and also utilize it via
NetworkManager.

Debian also enables the learn module. I'm leaving it off as it's marked
experimental.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Lubomir Rintel
2d6d47219e defconfig: Enable AP (wpa_supplicant)
Generally useful. Debian and Fedora enable this and support creating
access points via NetworkManager too.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Lubomir Rintel
f87450a73f defconfig: Enable WPS (wpa_supplicant)
WPS is generally useful with consumer hardware, and exposed to desktop
users via NetworkManager.

The Linux distros, including Debian, Fedora, and openSUSE enable it.
Debian also enables external registar support and NFC.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Jouni Malinen
d989e67d07 defconfig: Fix typos in Wi-Fi Display description
These were supposed to be talking about Wi-Fi Display, not Wi-Fi Direct.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:49 +02:00
Lubomir Rintel
c4eafad091 defconfig: Enable P2P and Wi-Fi Display (wpa_supplicant)
Generally useful. Debian and Fedora enable this, upcoming NetworkManager
provide some level of support too.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Lubomir Rintel
bf46c6fca1 defconfig: Add SAE (wpa_supplicant)
Generally useful and the distros (Debian, Fedora) enable this already to
support WPA3-Personal and protected 802.11s mesh BSSs.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Lubomir Rintel
ca098ee454 defconfig: Add DPP (wpa_supplicant)
Generally useful, already enabled in Debian and Fedora.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Jouni Malinen
2f7bc06816 UBSan: Avoid a warning on unsigned integer overflow
wpa_non_pref_chan_cmp() needs to use explicit typecasts to avoid UBSan
warnings for unsigned integer overflows.

mbo.c:298:26: runtime error: unsigned integer overflow: 1 - 2 cannot be represented in type 'unsigned int'

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:49 +02:00
Jouni Malinen
cc4cdefc7f UBSan: Avoid unnecessary warning
elems->mic might be NULL here, so do not try to decrement it by 2 even
if the result is not used anywhere due to a latter check for elems->mic
being NULL.

mesh_rsn.c:646:20: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xfffffffffffffffe

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:49 +02:00
Jouni Malinen
c4fccfc7a5 UBSan: Avoid memcmp(ptr, NULL, 0)
Skip the memcmp() call if ssid_len == 0 and entry->ssid might be NULL to
avoid an UBSan warning.

wpa_supplicant.c:3956:9: runtime error: null pointer passed as argument 2, which is declared to never be null

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:49 +02:00
Jouni Malinen
e3b5bd81bd UBSan: Fix RRM beacon processing attempt without scan_info
Some driver interfaces (e.g., wext) might not include the
data->scan_info information and data could be NULL here. Do not try to
call the RRM handler in this case since that would dereference the NULL
pointer when determining where scan_info is located and could
potentially result in trying to read from unexpected location if RRM is
enabled with a driver interface that does not support it.

events.c:1907:59: runtime error: member access within null pointer of type 'union wpa_event_data'

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:43:11 +02:00
Jouni Malinen
01d01a311c UBSan: Avoid size_t variable overflow in control interface
The loop "if (i-- == 0) break" style construction works in practice fine
since the check against 0 is done before decrementation. However, this
hits an UBSan warning, so split that decrementation to happen as a
separate step after the check and break from the loop.

ctrl_iface.c:5086:9: runtime error: unsigned integer overflow: 0 - 1 cannot be represented in type 'size_t' (aka 'unsigned long')

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:42:50 +02:00
Jouni Malinen
ec2e7c4cfa UBSan: Avoid unsigned integer overflow is throughput estimation
wpa_scan_result_compar() would return wb->est_throughput -
wa->est_throughput in case the comparison is done based on the
throughput estimates. While the return value from this function is a
signed integer, these est_throughput values are unsigned integers and
need to be explicitly typecast to avoid an UBSan warning.

scan.c:1996:30: runtime error: unsigned integer overflow: 54000 - 135000 cannot be represented in type 'unsigned int'

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:42:48 +02:00
Lior David
2c129a1b71 Fix cipher suite selector default value in RSNE for DMG
According to IEEE Std 802.11-2016, 9.4.2.25 when fields of an RSNE are
not included, the default values are used. The cipher suite defaults
were hardcoded to CCMP in the previous implementation, but the default
is actually different for DMG: GCMP (per 9.4.2.25.2).

It is not possible to find out from the RSNE if the network is non-DMG
or DMG, so callers of wpa_parse_wpa_ie_rsn() need to handle this case
based on context, which can be different for each caller.

In order to fix this issue, add flags to the wpa_ie_data indicating
whether pairwise/group ciphers were included in the RSNE. Callers can
check these flags and fill in the appropriate ciphers. The
wpa_parse_wpa_ie_rsn() function still initializes the ciphers to CCMP by
default so existing callers will not break. This change also fixes some
callers which need to handle the DMG network case.

Signed-off-by: Lior David <liord@codeaurora.org>
2019-02-21 12:42:24 +02:00
Davina Lu
83ebf55865 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the backhaul STA needs to add
a Multi-AP IE to the WFA vendor extension element in the WSC M1 message
that indicates it supports the Multi-AP backhaul STA role. The Registrar
(if it support Multi-AP onboarding) will respond to that with a WSC M8
message that also contains the Multi-AP IE, and that contains the
credentials for the backhaul SSID (which may be different from the SSID
on which WPS is performed).

Introduce a new parameter to wpas_wps_start_pbc() and allow it to be
set via control interface's new multi_ap=1 parameter of WPS_PBC call.
multi_ap_backhaul_sta is set to 1 in the automatically created SSID.
Thus, if the AP does not support Multi-AP, association will fail and
WPS will be terminated.

Only wps_pbc is supported.

This commit adds the multi_ap argument only to the control socket
interface, not to the D-Bus interface.

Since WPS associates with the fronthaul BSS instead of the backhaul BSS,
we should not drop association if the AP announces fronthaul-only BSS.
Still, we should only do that in the specific case of WPS. Therefore,
add a check to multi_ap_process_assoc_resp() to allow association with a
fronthaul-only BSS if and only if key_mgmt contains WPS.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Jouni Malinen
0f9632ceb8 mesh: More consistent checking of wpa_s->ifmsh in completion handler
It does not look like wpa_s->ifmsg could be NULL here, but better be
more consistent anyway to keep static analyzers happier by avoiding
dereference of wpa_s->ifmsh in the function before the NULL check for
it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:46:40 +02:00
Jouni Malinen
947b5a1532 P2P: Stop listen state if Action frame TX is needed on another channel
This speeds up P2P responses to frames received on an operating channel
in case there is an ongoing P2P listen operation on another channel.
This is applicable to drivers that support multiple channels in
concurrently.

This addresses an issue showing up in the
p2ps_channel_active_go_and_station_different_mcc test case where the
Provision Discovery Request frame can be received on the operating
channel of a group instead of the Listen channel. The response was
delayed until the listen operation timed out and this took too long time
for the peer to receive the response.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 16:53:03 +02:00
Jouni Malinen
3f8ceff54c Indicate wifi_generation in wpa_supplicant STATUS output
This adds a wifi_generation=4/5/6 line to the STATUS output if the
driver reports (Re)Association Request frame and (Re)Association
Response frame information elements in the association or connection
event. Only the generations 4 (HT = 802.11n), 5 (VHT = 802.11ac), and 6
(HE = 802.11ax) are reported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
dbfa691df4 VLAN assignment based on used WPA/WPA2 passphrase/PSK
Extend wpa_psk_file to allow an optional VLAN ID to be specified with
"vlanid=<VLAN ID>" prefix on the line. If VLAN ID is specified and the
particular wpa_psk_file entry is used for a station, that station is
bound to the specified VLAN. This can be used to operate a single
WPA2-Personal BSS with multiple VLANs based on the used passphrase/PSK.
This is similar to the WPA2-Enterprise case where the RADIUS server can
assign stations to different VLANs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
bbdb501460 Note HT overrides in debug log only if set
This makes the debug log cleaner by removing the mostly confusing prints
about HT override parameters if they are not actually used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Masashi Honma
73f285dad2 Add FT-PSK to GET_CAPABILITY key_mgmt
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-05 23:37:55 +02:00
Jouni Malinen
8f99a3c26a Clear config item writing buffer before freeing it
This buffer may be used to store items like passwords, so better clean
it explicitly to avoid possibility of leaving such items in heap memory
unnecessarily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-05 20:26:22 +02:00
Jouni Malinen
a68e9b6980 D-Bus: Fix P2P DeleteService dict iteration
The previous implementation assumed the first entry coming out from the
dict is always service_type. That may not be the case, so properly
iterate over all dict entries in one loop instead of assuming what the
first entry is.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 17:13:54 +02:00
Jouni Malinen
0607346f12 D-Bus: Fix a memory leak in DeleteService handler
If the service_type string entry is not included, the dict entry was not
cleared.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:35 +02:00
Jouni Malinen
d8c20ec591 DPP: Clear dpp_listen_freq on remain-on-channel failure
If the DPP_LISTEN command failed due to the driver rejecting the
remain-on-channel request, wpa_s->dpp_listen_freq was left set to the
requested listen frequency and this resulted in the next DPP_LISTEN for
the same frequency reporting "DPP: Already listening on .." even when
the driver was not really listening on that frequency. Fix this by
clearing wpa_s->dpp_listen_freq in the error case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-30 12:28:43 +02:00
Purushottam Kushwaha
59fa205388 P2P: Allow the avoid channels for P2P discovery/negotiation
The avoid channels are notified through
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY allow minimal traffic, so
enhance the P2P behavior accordingly by considering these avoid
frequencies for P2P discovery/negotiation as long as they are not in
disallowed frequencies list.

Additionally, do not return failure when none of social channels are
available as operation channel, rather, mark the op_channel/op_reg_class
to 0 as this would anyway get selected during the group formation in
p2p_prepare_channel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-30 12:15:19 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Daniel Golle
0dab477335 Write multi_ap_backhaul_sta to wpa_supplicant config
The network configration option multi_ap_backhaul_sta was added without
adding it to wpa_config_write_network(). Hence the value of this option
was not included when writing the configuration file. Fix this by
including it in wpa_config_write_network().

Fixes: 5abc7823b ("wpa_supplicant: Add Multi-AP backhaul STA support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-01-24 00:27:12 +02:00
Lubomir Rintel
98251c6f21 dbus: Document more possible BSS/RSA/KeyMgmt values
This is probably not ideal, since it would be better if it ended up
being autogenerated somehow, but at least it's somewhat of an
improvement.

Also added a comment that encourages keeping the docs in sync.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-01-24 00:24:09 +02:00
Lior David
1e591df063 Check supported types in wpas_mac_addr_rand_scan_set()
When setting scan with randomized MAC, check the requested scan type
against supported types, to ensure callers will not set an unsupported
type, since this can cause scan/connect failures later. It is better to
do this in wpas_mac_addr_rand_scan_set() instead of control interface
specific code to apply the constraint on all possible interfaces using
this setting.

Signed-off-by: Lior David <liord@codeaurora.org>
2019-01-24 00:21:34 +02:00
Lior David
c85249aa15 Fix test compilation error related to sme_event_unprot_disconnect()
sme_event_unprot_disconnect() is only defined with CONFIG_IEEE80211W, so
the CONFIG_TESTING_OPTIONS command UNPROT_DEAUTH can be defined only
with builds that enable IEEE 802.11w support.

Signed-off-by: Lior David <liord@codeaurora.org>
2019-01-24 00:21:28 +02:00
Jouni Malinen
13a200a92a FILS: Remove notes about experimental implementation
The standard amendment has been published and there has been sufficient
amount of interoperability testing for FILS to expect the protocol not
to be changed anymore, so remove the notes claiming this to be
experimental and not suitable for production use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-22 13:33:48 +02:00
Lubomir Rintel
86d4e05374 dbus: Expose support of SAE key management in BSS properties
This is going to be useful for NetworkManager and likely others.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-01-22 13:26:12 +02:00
Masashi Honma
3e949655cc Revert "mesh: Apply channel attributes before setup interface"
This reverts commit 2564184440.

Commit 2564184440 ("mesh: Apply channel attributes before setup
interface") triggers some channel configurations to result in leaking
memory. This seems to be caused by hapd->started not getting set when
going through a callback to start hostapd operation (e.g., when using
HT40 coex scan) due to hostapd_setup_bss() not getting called. This
results in hostapd_free_hapd_data() not clearing allocated
hapd->wpa_auth. This can be reproduced with the hwsim test case
mesh_secure_ocv_mix_legacy.

A more complete cleanup of the pending mesh patch for DFS support seems
to be needed to fix this properly, so the best approach for now is to
revert this patch and bring it back once rest of the mesh changes are
ready to be applied.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-21 23:43:12 +02:00
Amit Khatri
cc0f24196b D-Bus: Fix P2P Flush method to clear pending Action frames
If we call p2p_flush from ctrl_iface, before calling p2p_flush() it
calls wpas_p2p_stop_find(). Add the same call to the matching D-Bus
method to clear all pending operations.

Signed-off-by: Amit Khatri <amit7861234@gmail.com>
2019-01-21 12:30:17 +02:00
Jimmy Chen
a95906f938 P2P: support random interface address
To enhance privacy, generate a random interface for each group.

There are two configurations are introduced:
* p2p_interface_random_mac_addr
  enable interface random MAC address feature, default disable.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:58:30 +02:00
Jimmy Chen
9359cc8483 P2P: Support random device address
To enhance privacy, generate a random device address for P2P interface.
If there is no saved persistent group, it generate a new random MAC
address on bringing up p2p0. If there is saved persistent group, it will
use last MAC address to avoid breaking group reinvoke behavior.

There are two configurations are introduced:
* p2p_device_random_mac_addr
  enable device random MAC address feature, default disable.
* p2p_device_persistent_mac_addr
  store last used random MAC address.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:55:42 +02:00