Commit graph

34 commits

Author SHA1 Message Date
Jouni Malinen
650383134d tests: hostapd GET_CONFIG key_mgmt values
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
00f74dbdb6 tests: Verify hostapd ENABLE/DISABLE/ENABLE
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 20:41:54 +02:00
Jouni Malinen
f8ad9dc21a tests: Check for AP-DISABLED when setting up AP
This allows a critical error to be noticed more quickly and reported
more clearly in the test log.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 13:55:05 +02:00
Jouni Malinen
c2149b08da tests: Wait longer for hostapd REMOVE command to complete
Some kernel debugging options (especially
CONFIG_DEBUG_KOBJECT_RELEASE=y) can add significant blocking time to
interface removal with NL80211_CMD_DEL_INTERFACE and
SIOCGIFBR(BRCTL_DEL_BRIDGE) block for 1-8 seconds. This could result in
the VLAN test cases failing due to a wpaspy timeout on the REMOVE
command even though the issue was only in the kernel debugging code
making the operations significantly slower. Work around this by using a
longer timeout for that control interface command to allow this type of
debug kernel to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 11:42:59 +02:00
Jouni Malinen
97de642ae3 tests: HS 2.0 OSU and icon fetch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
4fcee244b9 tests: Verify RADIUS server MIB values
Enable hostapd control interface for the RADIUS server instance and
verify that the RADIUS server MIB counters are incremented.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
cce26eb411 tests: ctrl_iface STA-FIRST and STA-NEXT iteration
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
f8949f5f8f tests: Reset hostapd state with FLUSH between test cases
This is similar to the FLUSH command for wpa_supplicant.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
a36158befe tests: Add get_driver_status for Hostapd
This is identical to the same command in WpaSupplicant class.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
36408936f8 tests: Optimize wait_event()
Replace the fixed 100 ms waits with a select()-based wait and timeout
for full wait based on monotonic time to optimize wait_event().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d45e417f7b tests: Clean up hostapd ctrl_iface debug logging
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
5dec879d5b tests: Verify STA command output and EAPOL state
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 18:10:30 +02:00
Jouni Malinen
7fd15145ff tests: RADIUS
This adds initial set of test cases to increase RADIUS testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
71390dc87e tests: Verify WPA-Enterprise functionality
All the previous EAP test cases were using WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
6435799b85 tests: Add WNM test cases
These are not yet complete, but at least some frame exchanges can
be verified for WNM operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 20:04:27 +02:00
Jouni Malinen
629dbdd36a tests: Wait for AP-ENABLED
It takes some time for hostapd to complete AP startup. In some cases,
this could potentially result in station starting a scan before the AP
is beaconing or ready to reply to probes. To avoid such race conditions,
wait for AP-ENABLED before going ahead with the test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
bfe375ec77 tests: Verify behavior on incorrect GAS response type
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
b47750beba tests: Add test cases for automatic channel selection
This extends the Hostapd class to support monitor interface events and
STATUS command similarly to the WpaSupplicant class so that internal
hostapd state can be verified in more detail.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
77990cd7a9 tests: Add test case for multi-BSS configuration file
Verify that a single configuration file can be used to initiate multiple
BSSes in hostapd and that these BSSes can then be dynamically removed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:20:50 +02:00
Jouni Malinen
75428961d9 tests: Split hostapd debug log into per test case files
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 11:53:38 +02:00
Jouni Malinen
a633397756 tests: Test dynamic BSS addition/removal
test_ap_bss_add_remove verifies hostapd behavior when BSSes are
added/removed in multi-BSS configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 23:04:50 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
789b9f1d52 tests: Enable verbose logger_stdout debug in hostapd
This makes hostapd debug logs more helpful for debugging.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-30 00:38:57 +02:00
Jouni Malinen
9626962d2f tests: Add test cases for WPA2-Enterprise
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 20:35:26 +03:00
Jouni Malinen
cd7f1b9a1d tests: Add test cases for Fast BSS Transition
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-24 16:05:40 +03:00
Jouni Malinen
8c87f65f32 tests: Use /var/run/hostapd-global to avoid socket file in work dir
This makes some cases more convenient with read-only file systems.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 17:09:55 +03:00
Jouni Malinen
93a06242ce tests: Add a test case for Hotspot 2.0 network selection
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 01:01:24 +03:00
Jouni Malinen
302b7a1b09 tests: Add test cases for WPS operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:46:05 +03:00
Jouni Malinen
835a546b20 tests: Add test cases for PMF
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 13:47:22 +02:00
Jouni Malinen
e259d186cf tests: Add helper functions for starting hostapd AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:33:25 +02:00
Jouni Malinen
0165c4be10 tests: Add TDLS test cases for WEP and open network
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:15:43 +02:00
Jouni Malinen
e492837b67 tests: Add TDLS test cases with WPA-PSK and WPA+WPA2-PSK
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:51:48 +02:00
Jouni Malinen
b8cd4c542f tests: Configure hostapd dynamically during the tests
This makes it more convenient to change hostapd parameters between the
test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:37:03 +02:00