Commit graph

2715 commits

Author SHA1 Message Date
Jouni Malinen
a4c3e4b194 TDLS: Move TPK M1 sending to a separate function
Now all there TPK handshake messages are sent in similar functions
and are easier to find from the source code.
2011-03-06 14:54:20 +02:00
Jouni Malinen
2e1d335e44 TDLS: Allow unencrypted network negotiation through wpa_supplicant
This allows the same code path to be used for both protected and
unprotected configurations to limit need for duplicated code in
both the driver and wpa_supplicant.
2011-03-06 14:54:18 +02:00
Jouni Malinen
9fe6e4b4db TDLS: Clean up and fix Key Lifetime processing
This adds code for validating that the same Key Lifetime is used
throughout TPK handshake and enables TPK lifetime expiration and
renewal/teardown. These part seem to be working, but the actual
handling of TDLS Setup Confirm and renewal are not fully
functional yet.
2011-03-06 14:54:16 +02:00
Jouni Malinen
6b192bc346 TDLS: Add new testing modes for TPK lifetime testing
tdls_testing bits:
bit 3 = use short TPK lifetime (301 seconds)
bit 4 = use wrong TPK lifetime in TDLS Setup Response
bit 5 = use wrong TPK lifetime in TDLS Setup Confirm
2011-03-06 14:54:01 +02:00
Jouni Malinen
40cf22e6ff TDLS: Clear peer entries on association/disassociation
Since the TDLS links are allowed only to STAs that are in the same
BSS with us, clear all peer data whenever the BSS may have changed.
2011-03-06 14:53:58 +02:00
Jouni Malinen
5b0e6ece54 TDLS: Add a special testing feature for changing TDLS behavior
These special test cases can be configured at run time with "wpa_cli
tdls_testing <value>" where <value> is an integer (either as a decimal
or as a hex value with 0x prefix) bitmap of special features with
following bits available at this point:
bit 0 = long frame (add dummy subelement to make FTIE very long)
bit 1 = use alternative RSN IE (different RSN capab value and no extra
replay counters)
bit 2 = send incorrect BSSID in Link Identifier of TDLS Setup Request
(e.g., 1 = long FTIE, 2 = different RSN IE, 3 = both of those)

This is disabled by default and can be enabled for the build by
adding the following line to .config:
CFLAGS += -DCONFIG_TDLS_TESTING
2011-03-06 14:53:54 +02:00
Ganesh Prasadh
281ff0aa76 TDLS: Add initial support for TDLS (IEEE Std 802.11z-2010) 2011-03-06 14:53:49 +02:00
Jouni Malinen
23ab8e863f Clear PeerKey pointer on deinit 2011-03-06 14:52:52 +02:00
Shan Palanisamy
a4dc6e1934 atheros: Add support for setting RSN/WPS IEs in Beacon/Probe Resp 2011-03-06 14:31:59 +02:00
Shan Palanisamy
39b08b5fc0 Indicate assoc vs. reassoc in association event
This allows driver wrappers to indicate whether the association was
done using Association Request/Response or with Reassociation
Request/Response frames.
2011-03-06 14:31:46 +02:00
Shan Palanisamy
d7956add9c FT: Make FT-over-DS configurable (hostapd.conf ft_over_ds=0/1) 2011-03-06 14:31:42 +02:00
Jouni Malinen
c0647147c1 Add defines for Valgrind client requests
CFLAGS += -DCONFIG_VALGRIND can now be used to enable support for
Valgrind client requests to help in removing some non-issues from
Valgrind reports. This is mainly aimed at allowing unknown ioctl
results to be marked as defined data.
2011-03-06 14:31:26 +02:00
Jouni Malinen
0fa0ad4e17 eloop: Fix integer overflow in long timeouts
If the os_time_t variable used for the expiration time (seconds)
overflows when the registered timeout value is being added,
assume that the event would happen after an infinite time, i.e.,
would not really happen in practice. This fixes issues with
long key timeouts getting converted to immediate expiration due
to the overflow.
2011-03-06 14:31:20 +02:00
Dmitry Shmidt
9fc6aa9f95 Add Android make files for hostapd and wpa_supplicant 2011-02-27 19:19:43 +02:00
Iain Hibbert
8ce58ceb25 Avoid preprocessor directives in macro arguments
os_snprintf() can be a preprocessor macro and according to
C99 (6.10.3 clause 11) the results of having preprocessor directives
inside the macro arguments is undefined.
2011-02-27 18:59:26 +02:00
Jouni Malinen
73304dbf65 Allow client control socket location to be overridden
Build options can now be used to replace the location of client
sockets for UNIX domain socket control interface:

CFLAGS += -DCONFIG_CTRL_IFACE_CLIENT_DIR=\"/tmp\"
CFLAGS += -DCONFIG_CTRL_IFACE_CLIENT_PREFIX=\"wpa_ctrl_\"
2011-02-27 18:35:33 +02:00
Dmitry Shmidt
b3f3865e0e Use Android reserved namespace for control interface
On Android, use a special reserved namespace for the UNIX domain
socket.
2011-02-27 18:19:17 +02:00
Dmitry Shmidt
1480633f96 Use longer timeout in wpa_ctrl_request()
Wait longer for control interface response from wpa_supplicant to
avoid issues with some drivers that have long blocking operations.
2011-02-27 17:08:15 +02:00
Dmitry Shmidt
36fde1e79c Make wpa_ctrl_close() handle unopened connection 2011-02-27 17:07:07 +02:00
Masashi Honma
28878f8b0e bsd: Use correct size for routing socket
The buffer size for routing socket is fixed to 2048.
This patch fix it to obtain the size from OS.

This patch worked on x86 platform with NetBSD 5.0.2.
2011-02-27 14:01:39 +02:00
Jouni Malinen
0ed3f41a5b One more year update for copyright notices 2011-02-27 12:56:12 +02:00
Jouni Malinen
d3bab8dcdc Remove Host AP driver FAQ from the git repository
There is no need to keep this in hostap.git with wpa_supplicant
and hostapd. The CVS version from 0.5.x branch is identical and
it can be used instead.
2011-02-27 12:55:00 +02:00
Jouni Malinen
9e0749737c Update copyright notices to include the new year 2011-02-27 12:50:00 +02:00
Dmitry Shmidt
4e2ead7a72 Add wpa_supplicant state change event for Android network manager
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-02-26 13:20:16 +02:00
Dmitry Shmidt
fb0e5bd7df ctrl_iface: Return only finished line for scan results
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-02-26 13:16:04 +02:00
Dmitry Shmidt
2a0cd0670b OpenSSL: Add access to Android certificates
This allows keystore:// prefix to be used with client_cert and
private_key configuration parameters.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-02-26 12:08:20 +02:00
Dmitry Shmidt
193f439a8c Add CONFIG_ANDROID_LOG support
This makes wpa_printf() calls use __android_log_vprint(). In addition,
hexdumps are commented out.
2011-02-25 16:44:34 +02:00
Dmitry Shmidt
1a13534f17 Change executable permissions for Android
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-02-25 16:21:18 +02:00
Jouni Malinen
c4d4aebe69 wext: Do not include typedefs for Android build
Android build gets __u32 and friends from
bionic/libc/kernel/arch-x86/asm/types.h and having the typedefs here
causes redefinition errors.
2011-02-25 13:36:17 +02:00
Jouni Malinen
47c64bfcc7 wext: Sync with linux/wireless.h from wireless-testing.git
This updates the Linux wireless extensions header file to be based
on the latest version (22).
2011-02-25 13:29:52 +02:00
Konguraj(Raj) Kulanthaivel
43a26f606c P2P: Add wpas_notify_p2p_sd_response
Signed-off-by: Konguraj(Raj) Kulanthaivel <konguraj.kulanthaivel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:47:34 +02:00
Konguraj(Raj) Kulanthaivel
e1653cac23 P2P: Add wpas_notify_p2p_sd_request
Signed-off-by: Konguraj(Raj) Kulanthaivel <konguraj.kulanthaivel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:45:39 +02:00
Jean-Michel Bachot
5ccdf84f0d P2P: Add invitation result notification
Add a notification function for the result of an invitation.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:40:21 +02:00
Jayant Sane
c2641bf7cf P2P: Add GO negotiation status notification
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:34:52 +02:00
Konguraj(Raj) Kulanthaivel
32d1bce0c0 P2P: Add wpas_notify_p2p_go_neg_req
Add a notification for received GO negotiation requests.

Signed-off-by: Konguraj(Raj) Kulanthaivel <konguraj.kulanthaivel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:30:19 +02:00
Johannes Berg
408af93ed4 P2P: Add group removed notification
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:27:23 +02:00
Johannes Berg
56eeb8f299 P2P: Add method to signal lost device
This signal is used to notify users of the P2P
state machine or wpa_supplicant of lost devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:22:16 +02:00
Johannes Berg
d642d2d267 P2P: Add notification for P2P device found
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:08:18 +02:00
Johannes Berg
c165d81eea P2P: Add p2p_get_peer_found to get peer info
This will only retrieve information about peers that have been fully
discovered, not peers that are only half-discovered based on their Probe
Request frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 22:05:22 +02:00
Johannes Berg
8fd7dc1b1c P2P: Add new_device flag to dev_found callback
The DBus code will want to have perfect matching of dev_found and the
dev_lost it adds so it doesn't need to keep track internally. Enable
that with a new flag in the core that tracks whether we have already
notified about this -- the existing users can ignore it.

The part where this is always set to 1 if the new device is discovered
by a driver that has P2P in the driver is buggy -- the driver should
feed the P2P peer database and then that should feed the notification
here instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 21:59:58 +02:00
Konguraj(Raj) Kulanthaivel
c5db8e5170 P2P: Embed publically visible struct in peer info
This embeds some information about each P2P peer that will be publically
visible in a struct that is shared.

The dev_found notification function is also passed the new struct, which
requires some work for the driver-based P2P management.

Signed-off-by: Konguraj(Raj) Kulanthaivel <konguraj.kulanthaivel@intel.com>
Signed-off-by: Fabien Marotte <fabienx.marotte@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-24 21:51:17 +02:00
Helmut Schaa
e926bcffd8 hostapd: Inherit correct MAC address for AP VLAN interfaces
When using multiple vifs and dynamic vlan tagging is enabled on any
interface, the created AP VLAN interfaces get the BSSID of the first
AP mode interface instead of the BSSID of the corresponding AP mode
interface.

Example:

wlan0 - xx:xx:xx:xx:x0
wlan1 - xx:xx:xx:xx:x1

Assume a STA connects to the AP interface wlan1 and gets a dynamic
VLAN tag 100 assigned by the RADIUS server. Hostapd will create an AP
VLAN interface wlan1.100 but doesn't set an address for this interface
which results in wlan1.100 getting the same address as wlan0:

wlan1.100 - xx:xx:xx:xx:x0

As a result the STA that was moved to wlan1.100 isn't able to finish its
4-way handshake since mac80211 won't pass its frames to wlan1.100 due to
the different address.

To fix this issue make use of the address of the AP interface when
creating an AP VLAN interface.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2011-02-24 21:25:40 +02:00
Jouni Malinen
9526fd293f P2P: Handle P2P-not-supported without segfaults
Previous code was assuming that the P2P module is always initialized.
However, that is not the case anymore with drivers that do not support
P2P. Add verification of whether P2P is enabled before trying to execute
P2P commands.
2011-02-24 21:13:30 +02:00
Ben Greear
24d75245bd AP: Update logging related to inactivity and disassociation
Add MAC addresses for stations and use wpa_msg instead of printf
methods to make it easier to grep logs and find messages for the
station in question.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-24 17:44:45 +02:00
Ben Greear
1aae01fc04 Add more wpa_auth debugging messages 2011-02-24 17:35:59 +02:00
Ben Greear
48b84f18a3 Wait 1 second before (re)scanning on authentication timeout
If we timed out, the AP or the local radio may be busy.
So, wait a second until scanning again.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-24 17:16:16 +02:00
Ben Greear
e29853bbff SME: Add timers for authentication and asscoiation
mac80211 authentication or association operation may get stuck for some
reasons, so wpa_supplicant better use an internal timer to recover from
this.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-24 16:59:46 +02:00
Jouni Malinen
effab86ff2 Remove unneeded OpenSSL error messages from key/cert parsing
If parsing of the certificate or private key succeeds using any of
the tried encoding types, clear the OpenSSL error queue without
showing the pending errors in debug log since they do not really
provide any useful output and can be confusing.
2011-02-22 22:19:55 +02:00
Raghunathan Kailasanathan
58708b3bd1 nl80211: Use nl_atype() from libnl
libnl provides nla_type() which can be used to derive nla_type from
struct nlattr.
2011-02-22 21:48:49 +02:00
Jouni Malinen
b89883a444 P2P: Notify WPS-M2D event on parent interface and handle PBC overlap
GO may use M2D to notify that PBC overlap was detected if the GO was
configured to allow only a specific P2P Device to connect using PBC.
We need to report the M2D message on the parent interface if a
separate group interface is used. In addition, we can stop the P2P
operation if PBC overlap was indicated similarly to what we are
already doing in th case the overlap is detected locally.
2011-02-22 12:20:16 +02:00