Commit graph

59 commits

Author SHA1 Message Date
Jouni Malinen
1d2e6a451a tests: GAS comeback delay that is longer than query timeout
This is a regression test for comeback delay values larger than
GAS_QUERY_TIMEOUT_PERIOD causing timeouts for the query.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 07:02:30 +02:00
Jouni Malinen
1a4b4c8466 tests: Update gas_anqp_capab_list and gas_anqp_extra_elements
The FILS ANQP-element changes made couple of the generic ANQP test steps
fail. Update this to ignore the special FILS cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 13:01:49 +02:00
Jouni Malinen
242fc738a0 tests: GAS/ANQP and Capability List ANQP-element
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-17 16:00:59 +02:00
Jouni Malinen
8e5c2c208e tests: GAS/ANQP and Venue URL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-17 16:00:59 +02:00
Jouni Malinen
09b812c952 tests: Extend gas_anqp_get to cover MBO cases with non-MBO AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
21d410ca82 tests: GAS/ANQP and Hotspot 2.0 element protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:14:42 +03:00
Jouni Malinen
5dec77ee00 tests: GAS/ANQP and icon binary protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:05:35 +03:00
Jouni Malinen
3e5f781800 tests: Extend GAS error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
3429e2ff36 tests: GAS/ANQP query OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
60547477e0 tests: ANQP_GET to unknown BSS
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
69e85c7fb3 tests: GAS_REQUEST OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jouni Malinen
643be15d41 tests: GAS failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 18:44:55 +03:00
Jouni Malinen
37a6765967 tests: GAS/ANQP query protected vs. not protected
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 18:33:13 +03:00
Jouni Malinen
1ad6f0d5e6 tests: GAS query deleted at deinit
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 16:30:08 +03:00
Jouni Malinen
20c7d26f80 tests: More wpa_supplicant/bss.c OOM coverage
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 20:41:09 +03:00
Jouni Malinen
61854f16ec tests: GAS/ANQP query and Address 3 value selection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-10 22:30:29 +03:00
Janusz Dziedzic
6f334bf7a0 tests: Use hapd from hostapd.add_ap()
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
afc26df29c tests: Pass full apdev to add_ap() function (4)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (4) converts the cases that call hostapd.add_ap() from a
helper function that got apdev[i] as an argument.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:12 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
47eac38a63 tests: Add AP Location Public Identifier into gas_anqp_extra_elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-21 11:56:56 +02:00
Jouni Malinen
f2dfb1dafa tests: GAS fragmentation and comeback delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
70f2a3f4ab tests: GAS fragmentation with mac80211_hwsim MCC enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
35c146bc1b tests: Update gas_anqp_oom_hapd to match new implementation
Since wpa_supplicant is now retrying GAS comeback failures once, the
gas_anqp_oom_hapd test case started failing. Fix this by updating the
test case to expect success (on the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
f9a9304479 tests: Modify gas_malformed_comeback_resp to allow GAS retries
This is in preparation of a wpa_supplicant change to allow GAS retries
which can result in the previous test case design showing failures due
to "unexpected" management frames (GAS Initial Request from the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
2c68ae2b21 tests: Remove forgotten print from gas_anqp_oom_hapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 13:32:59 +02:00
Jouni Malinen
1c532fd5c0 tests: GAS/ANQP and extra ANQP elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
5a145a55a1 tests: Verify FAIL-BUSY return on SCAN during gas_comeback_delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:52:29 +03:00
Jouni Malinen
ca158ea621 tests: Skip EAP-TTLS/CHAP, MSCHAP, MSCHAPV2 test cases in FIPS mode
In addition, replace some of the CHAP cases with PAP since that enables
more coverage without breaking the main test focus.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
fee39910ee tests: Check GAS and ANQP completion events in gas_fragment
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 17:13:24 +03:00
Jouni Malinen
6d01255e57 tests: GAS/ANQP query and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:17:33 +03:00
Jouni Malinen
c518fecc82 tests: Pending GAS query interrupted with deinit
These are regression test cases for a segmentation fault issue (use of
freed memory) where interface removal happened while a gas-query item
was pending.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 02:57:34 +03:00
Jouni Malinen
a60dbbce44 tests: ANQP-QUERY-DONE event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-20 02:26:21 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
ea27f66292 tests: STOP_FETCH_ANQP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
5e80b502ee tests: Additiona GAS_REQUEST/GAS_RESPONSE_GET coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
ea68ed56b9 tests: Additional ANQP_GET and HS20_ANQP_GET error coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
6ec64f3ec8 tests: Truncated GAS query request
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 00:27:15 +03:00
Jouni Malinen
de8c4144fa tests: No pending query for GAS comeback
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
1d1de2306d tests: Limit on number of GAS pending dialog contexts
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
4ef7053119 tests: Make GAS test cases more robust
Scan explicitly for the specific AP to work around issues where under
heavy CPU load, the single active scan round may miss the delayed Probe
Response from the AP. In addition, verify that ANQP_GET commands succeed
to make error cases clearer in the log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-16 00:30:40 +03:00
Jouni Malinen
6d6f3c0926 tests: HS20_ANQP_GET
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
e56e286d00 tests: GAS/ANQP query for both IEEE 802.11 and Hotspot 2.0 elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Jouni Malinen
d61ed3ac3c tests: GAS with unknown advertisement protocol id
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 20:58:14 +02:00
Jouni Malinen
75f6134dd4 tests: GAS comeback protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
adf277a007 tests: Minor clean up for GAS test cases
Do not run a full scan in gas_generic since this is not really needed.
Dump pending event messages after long wait to make logs clearer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d7a99700de tests: Clean up and optimize gas_concurrent_scan and _connect
No need to run a full scan as the first step since it only needs to find
the AP from a known channel for the GAS operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:06 +02:00
Jouni Malinen
cef16c47fb tests: Include additional ANQP elements for testing coverage
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
84262feffd tests: Verify behavior on malformed GAS responses
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00