Commit graph

14428 commits

Author SHA1 Message Date
Jouni Malinen
9d21594354 tests: WNM Sleep Mode - RSN with OCV - local failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 16:02:54 +03:00
Jouni Malinen
815f58a96f tests: nl80211 freq reporting in station mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:41:26 +03:00
Jouni Malinen
c5fff8bbd2 nl80211: Update assoc_freq and bss->freq based on real association info
Move event.assoc_info.freq selection to be after the
nl80211_get_assoc_ssid() call so that the current cfg80211 information
on the operating channel can be used should anything unexpected have
happened between the association request and completion of association.
Furthermore, update bss->freq based on assoc_freq to make that
information a bit more useful for station mode. It was already updated
after channel switches during association, but not at the beginning of
association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:40:45 +03:00
Jouni Malinen
091c227714 nl80211: Clear bss->freq on station mode disconnection
This fixes some issues where bss->freq could have been used to replace
the current operating channel when sending out a management frame.
bss->freq has not been consistently used to track the current operating
channel in station mode, so it should not be trusted for this type of
uses. Clearing it makes this a bit more robust by at least avoiding the
cases of information from past association being used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:33:37 +03:00
Jouni Malinen
d7c98f9558 tests: eap_pwd_perform_confirm_exchange() local failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:35:47 +03:00
Jouni Malinen
b95d79e7bc tests: eap_pwd_perform_commit_exchange() local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:34:38 +03:00
Jouni Malinen
c9065bd265 tests: EAP-pwd commit request error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
cb5db189ed Remove the unused crypto_ec_cofactor() function
All users of this wrapper function were removed, so the wrapper can be
removed as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
8b093db2c3 EAP-pwd: Remove unused checks for cofactor > 1 cases
None of the ECC groups supported in the implementation had a cofactor
greater than 1, so these checks are unreachable and for all cases, the
cofactor is known to be 1. Furthermore, RFC 5931 explicitly disallow use
of ECC groups with cofactor larger than 1, so this checks cannot be
needed for any curve that is compliant with the RFC.

Remove the unneeded group cofactor checks to simplify the
implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
c7c267fa51 tests: EAP-pwd rejection of groups 25, 26, and 27
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
92e1b96c26 EAP-pwd: Disallow ECC groups with a prime under 256 bits
Based on the SAE implementation guidance update to not allow ECC groups
with a prime that is under 256 bits, reject groups 25, 26, and 27 in
EAP-pwd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
caf4d1c979 tests: Remove testing of EAP-pwd groups 25, 26, and 27
This is in preparation of disallowing all use of these groups. Negative
test case for the groups will be added in a separate commit after the
implementation has been changed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
6fe3ee722d tests: EAP-pwd local failure in crypto_bignum_rand()
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
6570949b2c OpenSSL: Fix server side openssl_ecdh_curves configuration with 1.0.2
It looks like SSL_CTX_set1_curves_list() command alone is not sufficient
to enable ECDH curve selection with older OpenSSL versions for TLS
server, so enable automatic selection first and specify the exact list
of curves after that.

This fixes failures in openssl_ecdh_curves test case when hostapd uses
OpenSSL 1.0.2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
8ff2401d54 tests: EAP-pwd eap_pwd_get_element() local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:03 +03:00
Jouni Malinen
4f183becf0 tests: EAP-pwd compute_password_element() local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 16:58:38 +03:00
Jouni Malinen
b061b9e943 tests: CONFIG_TLS=linux build of wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:57:42 +03:00
Jouni Malinen
52b1cb5d73 tests: crypto_hash_finish() failure in eap_pwd_kdf()
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:53:42 +03:00
Jouni Malinen
e8d8f4b680 tests: EAP-EKE rejection of unsupported DH groups 2 and 5
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:20:24 +03:00
Jouni Malinen
52ad367624 tests: Make regdom clearing in WNM tests more robust
It looks like the scan operation could end up reverting regdom back to
the previously configured one, so configure 00 country before starting
the disconnect-and-stop-scan operation to give some more time for the
regdom to be cleared.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:06:25 +03:00
Jouni Malinen
e467d7ab4a tests: Show ifname in country code not cleared messages
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:06:09 +03:00
Avraham Stern
986bfb6ed6 tests: Update rrm_beacon_req_last_frame_indication to match implementation
The last beacon report indication was set in all the beacon report
elements in the last frame of the beacon report, while it should be set
only in the last beacon report element of the last frame. This is now
fixed in wpa_supplicant, so update the test case expectation to match
the fixed behavior.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-04-13 11:56:08 +03:00
Avraham Stern
56ac1f9dfe RRM: Set last beacon report indication in the last element only
The last beacon report indication was set in all the beacon report
elements in the last frame of the beacon report, while it should be
set only in the last beacon report element of the last frame.

Fixes: ecef0687dc ("RRM: Support for Last Beacon Report Indication subelement")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-04-13 11:51:05 +03:00
Ben Greear
6f484978fb Document BSS expiration configurables
Help the user be aware of the options to configure when
wpa_supplicant will remove a BSS due to expiration.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-04-13 11:41:51 +03:00
Ryo ONODERA
8f36c84a27 bsd: Fix a typo in error message
When SIOCG80211 failed, show error message with SIOCG80211
instead of SIOCS80211.

Signed-off-by: Ryo ONODERA <ryo@tetera.org>
2019-04-13 11:26:25 +03:00
Johannes Berg
61876c7eed tests: Fix trace-cmd recording with python3
The change to python3 broke trace-cmd recording, two
strings need to be bytes instead. Fix that.

Also add a flush() that seems to be needed now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-12 20:43:33 +03:00
Jouni Malinen
dd1a8cef4c Remove unnecessary copying of SSID and BSSID for external_auth
The external authentication command and event does not need to copy the
BSSID/SSID values into struct external_auth since those values are used
before returning from the call. Simplify this by using const u8 * to
external data instead of the array with a copy of the external data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-12 20:43:26 +03:00
Srinivas Dasari
4ffb0fefe4 hostapd: Support external authentication offload in AP mode
Extend commit 5ff39c1380 ("SAE: Support external authentication
offload for driver-SME cases") to support external authentication
with drivers that implement AP SME by notifying the status of
SAE authentication to the driver after SAE handshake as the
driver acts as a pass through for the SAE Authentication frames.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2019-04-12 20:33:35 +03:00
Srinivas Dasari
236e793e7b nl80211: External authentication in driver-based AP SME mode
This extends driver interface to nl80211 by introducing the following
changes,
1. Register for Authenication frames in driver-based AP SME mode.
2. Advertise NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in set_ap when
   offloaded SAE authentication is supported.
3. Extend the NL80211_CMD_EXTERNAL_AUTH interface to also send PMKID
   so that the drivers can respond to the PMKSA cached connection
   attempts from the stations avoiding the need to contact user space
   for all PMKID-based connections.
4. Send external auth status to driver only if it is a driver based
   SME solution.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2019-04-12 20:29:56 +03:00
nakul kachhwaha
2ab19f4be9 Reset beacon_set_done on disabling interface
beacon_set_done did not get reset to zero on disabling interface using
DISABLE control interface command and the subsequent ENABLE command will
caused configuration of Beacon/Probe Response/Association Response frame
IEs twice. The unnecessary two step configuration can be avoided by
resetting beacon_set_done on DISABLE so that ENABLE can bring up the
interface in a single step with fully updated IEs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-12 20:18:09 +03:00
Jouni Malinen
89bbe6f87a EAP-pwd: Get rid of unnecessary allocation of temporary buffer
Binary presentations of element and scalar can be written directly to
the allocated commit message buffer instead of having to first write
them into temporary buffers just to copy them to the actual message
buffer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
4396f74a36 EAP-pwd: Enforce 1 < rand,mask < r and rand+mask mod r > 1
RFC 5931 has these conditions as MUST requirements, so better follow
them explicitly even if the rand,mask == 0 or rand+mask == 0 or 1 cases
are very unlikely to occur in practice while generating random values
locally.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
2e3849bcf5 tests: EAP-pwd protocol tests for invalid EAP-pwd-Commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
faddd025c3 tests: SAE commit invalid scalar/element
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
2b70a82cef tests: SAE and confirm after invalid commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
72056f69aa tests: Module tests for const_time_*() functions
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
16d4f10691 EAP-pwd: Check element x,y coordinates explicitly
This adds an explicit check for 0 < x,y < prime based on RFC 5931,
2.8.5.2.2 requirement. The earlier checks might have covered this
implicitly, but it is safer to avoid any dependency on implicit checks
and specific crypto library behavior. (CVE-2019-9498 and CVE-2019-9499)

Furthermore, this moves the EAP-pwd element and scalar parsing and
validation steps into shared helper functions so that there is no need
to maintain two separate copies of this common functionality between the
server and peer implementations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
8ad8585f91 EAP-pwd client: Verify received scalar and element
When processing an EAP-pwd Commit frame, the server's scalar and element
(elliptic curve point) were not validated. This allowed an adversary to
bypass authentication, and act as a rogue Access Point (AP) if the
crypto implementation did not verify the validity of the EC point.

Fix this vulnerability by assuring the received scalar lies within the
valid range, and by checking that the received element is not the point
at infinity and lies on the elliptic curve being used. (CVE-2019-9499)

The vulnerability is only exploitable if OpenSSL version 1.0.2 or lower
is used, or if LibreSSL or wolfssl is used. Newer versions of OpenSSL
(and also BoringSSL) implicitly validate the elliptic curve point in
EC_POINT_set_affine_coordinates_GFp(), preventing the attack.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
d63edfa902 EAP-pwd server: Detect reflection attacks
When processing an EAP-pwd Commit frame, verify that the peer's scalar
and elliptic curve element differ from the one sent by the server. This
prevents reflection attacks where the adversary reflects the scalar and
element sent by the server. (CVE-2019-9497)

The vulnerability allows an adversary to complete the EAP-pwd handshake
as any user. However, the adversary does not learn the negotiated
session key, meaning the subsequent 4-way handshake would fail. As a
result, this cannot be abused to bypass authentication unless EAP-pwd is
used in non-WLAN cases without any following key exchange that would
require the attacker to learn the MSK.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
70ff850e89 EAP-pwd server: Verify received scalar and element
When processing an EAP-pwd Commit frame, the peer's scalar and element
(elliptic curve point) were not validated. This allowed an adversary to
bypass authentication, and impersonate any user if the crypto
implementation did not verify the validity of the EC point.

Fix this vulnerability by assuring the received scalar lies within the
valid range, and by checking that the received element is not the point
at infinity and lies on the elliptic curve being used. (CVE-2019-9498)

The vulnerability is only exploitable if OpenSSL version 1.0.2 or lower
is used, or if LibreSSL or wolfssl is used. Newer versions of OpenSSL
(and also BoringSSL) implicitly validate the elliptic curve point in
EC_POINT_set_affine_coordinates_GFp(), preventing the attack.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Jouni Malinen
ac8fa9ef19 SAE: Fix confirm message validation in error cases
Explicitly verify that own and peer commit scalar/element are available
when trying to check SAE confirm message. It could have been possible to
hit a NULL pointer dereference if the peer element could not have been
parsed. (CVE-2019-9496)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
cff138b074 SAE: Use constant time operations in sae_test_pwd_seed_ffc()
Try to avoid showing externally visible timing or memory access
differences regardless of whether the derived pwd-value is smaller than
the group prime.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
f8f20717f8 SAE: Use const_time selection for PWE in FFC
This is an initial step towards making the FFC case use strictly
constant time operations similarly to the ECC case.
sae_test_pwd_seed_ffc() does not yet have constant time behavior,
though.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
90839597cc SAE: Mask timing of MODP groups 22, 23, 24
These groups have significant probability of coming up with pwd-value
that is equal or greater than the prime and as such, need for going
through the PWE derivation loop multiple times. This can result in
sufficient timing different to allow an external observer to determine
how many rounds are needed and that can leak information about the used
password.

Force at least 40 loop rounds for these MODP groups similarly to the ECC
group design to mask timing. This behavior is not described in IEEE Std
802.11-2016 for SAE, but it does not result in different values (i.e.,
only different timing), so such implementation specific countermeasures
can be done without breaking interoperability with other implementation.

Note: These MODP groups 22, 23, and 24 are not considered sufficiently
strong to be used with SAE (or more or less anything else). As such,
they should never be enabled in runtime configuration for any production
use cases. These changes to introduce additional protection to mask
timing is only for completeness of implementation and not an indication
that these groups should be used.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
362704dda0 SAE: Avoid branches in is_quadratic_residue_blind()
Make the non-failure path in the function proceed without branches based
on r_odd and in constant time to minimize risk of observable differences
in timing or cache use. (CVE-2019-9494)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
6513db3e96 SAE: Minimize timing differences in PWE derivation
The QR test result can provide information about the password to an
attacker, so try to minimize differences in how the
sae_test_pwd_seed_ecc() result is used. (CVE-2019-9494)

Use heap memory for the dummy password to allow the same password length
to be used even with long passwords.

Use constant time selection functions to track the real vs. dummy
variables so that the exact same operations can be performed for both QR
test results.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
aaf65feac6 EAP-pwd: Use constant time and memory access for finding the PWE
This algorithm could leak information to external observers in form of
timing differences or memory access patterns (cache use). While the
previous implementation had protection against the most visible timing
differences (looping 40 rounds and masking the legendre operation), it
did not protect against memory access patterns between the two possible
code paths in the masking operations. That might be sufficient to allow
an unprivileged process running on the same device to be able to
determine which path is being executed through a cache attack and based
on that, determine information about the used password.

Convert the PWE finding loop to use constant time functions and
identical memory access path without different branches for the QR/QNR
cases to minimize possible side-channel information similarly to the
changes done for SAE authentication. (CVE-2019-9495)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
c93461c1d9 OpenSSL: Use constant time selection for crypto_bignum_legendre()
Get rid of the branches that depend on the result of the Legendre
operation. This is needed to avoid leaking information about different
temporary results in blinding mechanisms.

This is related to CVE-2019-9494 and CVE-2019-9495.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
6e34f618d3 Add helper functions for constant time operations
These functions can be used to help implement constant time operations
for various cryptographic operations that must minimize externally
observable differences in processing (both in timing and also in
internal cache use, etc.).

This is related to CVE-2019-9494 and CVE-2019-9495.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
d42c477cc7 OpenSSL: Use constant time operations for private bignums
This helps in reducing measurable timing differences in operations
involving private information. BoringSSL has removed BN_FLG_CONSTTIME
and expects specific constant time functions to be called instead, so a
bit different approach is needed depending on which library is used.

The main operation that needs protection against side channel attacks is
BN_mod_exp() that depends on private keys (the public key validation
step in crypto_dh_derive_secret() is an exception that can use the
faster version since it does not depend on private keys).

crypto_bignum_div() is currently used only in SAE FFC case with not
safe-prime groups and only with values that do not depend on private
keys, so it is not critical to protect it.

crypto_bignum_inverse() is currently used only in SAE FFC PWE
derivation. The additional protection here is targeting only OpenSSL.
BoringSSL may need conversion to using BN_mod_inverse_blinded().

This is related to CVE-2019-9494 and CVE-2019-9495.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00