Commit graph

119 commits

Author SHA1 Message Date
Jouni Malinen
ce8ca2f9a0 tests: Make wpas_mesh_max_peering more robust
The previous version was enabling all three stations at the same time
and left dev[1] and dev[2] competing on getting connected with dev[0]
that allowed only one pairing. This was not exactly robust and the pass
criteria depended on an extra event from either dev[1] or dev[2]. Fix
that by first connecting dev[0] and dev[1] and only after that, start
dev[2]. This allows proper validation of both the peering limit on
dev[0] and no extra event on dev[2].

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
31705bf4fc tests: Skip mesh test cases if kernel does have CONFIG_MAC80211_MESH
Previously, these test cases were marked as failures, but it is nicer to
mark as skipped if the kernel does not include support for mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
e0cfd223c0 tests: Fix mesh no_auto_peer=1 test cases to allow enough time for retry
If the initial Authentication frame was too early for the peer (i.e.,
NEW_PEER_CANDIDATE event arrived only after the Authentication frame),
wpas_mesh_open_no_auto and wpas_mesh_secure_no_auto test cases were
failing since they waited only for 10 seconds for the connection to be
completed while the retry timer was set to 10-20 seconds on the
authenticator side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 13:10:22 +02:00
Jouni Malinen
9be2b811d4 tests: Mesh max peering limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:53:02 +02:00
Jouni Malinen
4b9481bcd8 tests: Remove unnecessary wrap_wpas_mesh_test() complexity
This function did not seem to do anything else apart from making it less
obvious that hwsim_utils.test_connectivity() is called.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:52:54 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Jouni Malinen
f1381f99e4 tests: Mesh ht_mode options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:27:22 +02:00
Jouni Malinen
d48b64ba6c tests: Use helper function for adding open mesh network
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:34:43 +02:00
Jouni Malinen
7e3614df5c tests: Mesh with dynamic interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:28:36 +02:00
Jouni Malinen
11ace2ed1f tests: Mesh and missing SAE password
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
fba65f7240 tests: Mesh BSS data
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:43 +02:00
Jouni Malinen
54cacef5eb tests: Mesh sae_groups configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:40 +02:00
Jouni Malinen
146374019a tests: Add missing test descriptions
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
5e2a8ec9e7 tests: wpa_supplicant ctrl_iface mesh command error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
73a2f82887 tests: Increase retry limit and timeout for wpas_mesh_open_no_auto
This test case was failing every now and then due to dev1
(no_auto_peer=1) not receiving the new-peer-candidate event in time
before dev0 has already stopped retries on mesh peering open message.
This sounds somewhat expected with the default 4 * 40 ms = 160 ms
retries and 1000 TU beacon interval. Use maximum timeout 16 * 255 ms =
4080 ms to make this test case less likely to fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Jouni Malinen
4b57af2aaa tests: Remove duplicated connectivity test from mesh
hwsim_utils.test_connectivity() is already bidirectional test, so there
is no need to run it twice with the devices swapped for the second
iteration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
17ffdf3951 tests: Clear sae_groups to default value in forgotten cases
It was possible for some of the SAE test cases (e.g., ap_ft_sae) to fail
if they were run after the sae_groups test case that left the SAE group
configuration to a value that is not enabled by default. Fix this by
clearing sae_groups setting in the couple of test cases that were not
yet doing this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-25 15:19:19 +02:00
Jason Mobarak
f54b926baa tests: Mesh HT mode
Change the mesh tests to check for the presence of HT in the scan
results.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-20 17:01:43 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00