Commit graph

31 commits

Author SHA1 Message Date
Janusz Dziedzic
afc26df29c tests: Pass full apdev to add_ap() function (4)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (4) converts the cases that call hostapd.add_ap() from a
helper function that got apdev[i] as an argument.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:12 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
2ca502dc73 tests: WNM BSS transition management with various PHY types
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 20:57:32 +03:00
Jouni Malinen
fb915d50fd tests: WNM BSS Transition Management and cfg80211 connect command
For now, this is not enforcing cfg80211 reassociation since the needed
changes do not yet exist in the upstream kernel. Once those changes are
accepted, the TODO note in the test case can be addressed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-25 12:11:59 +02:00
Jouni Malinen
b495500fb1 tests: WNM BSS Transition Management and security mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
f1e26f8965 tests: BTM Request Preferred Candidate List followed by vendor element
This goes through parsing code for a case that was interpreted
incorrectly in the past.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-03 17:10:25 +02:00
Jouni Malinen
13a17a77a4 tests: WNM BSS Transition Management and scan behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-26 17:19:21 +02:00
Jouni Malinen
cd54a3edac tests: WNM Sleep Mode - AP side OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-22 19:53:05 +02:00
Jouni Malinen
c24c144fc7 tests: WNM BSS Transition Management query
This tests BSS Transition Management Query frame generation with
candidate list and transmission of the following request and response
frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-22 19:53:04 +02:00
Avraham Stern
85cc109ea6 tests: WNM BSS Transition Management with MBO IE
Add tests to verify that MBO IE in BSS Transition Management Request
frame is parsed correctly:

1. The MBO transition reason code is received by the MBO station.
2. The MBO cellular data connection preference is received by the
   MBO station.
3. The MBO station does not try to connect to the AP until the retry
   delay is over.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Jouni Malinen
561536205a tests: WNM BSS Transition Management with invalid operating class
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-05 17:07:48 +02:00
Jouni Malinen
8823178c96 tests: Start WNM-Sleep Mode in wnm_action_proto*
This is needed to avoid test case failures with additional state
validation in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
63a19e56b0 tests: WNM Action protocol testing (PMF disabled)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
c4082f7839 tests: WNM Action protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
8cc9bc0775 tests: WNM BSS Transition Management in different countries
This increases testing coverage for ieee802_chan_to_freq*() functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 18:11:14 +03:00
Jouni Malinen
7f08b2f91d tests: Make WNM Sleep Mode tests more robust
It was possible for the Action frame used for entring WNM Sleep Mode to
get dropped on the AP side due to it arriving prior to having processed
EAPOL-Key message 4/4 due to a race condition between Data and
Management frame processing paths. Avoid this by waiting for
AP-STA-CONNECTED event from hostapd prior to trying to enter WNM Sleep
Mode. In addition, make the check for the STA flag change more robust by
allowing the wait to be a bit longer with a loop that terminates as soon
as the flag has changed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 15:58:05 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
9d7fdac5b3 tests: Try to clear scan results after regulatory domain changes
It was possible for regulatory domain changes to "leak" into following
test cases in number of cases where the cfg80211 BSS table remained
after regulatory domain had been restored to world roaming. Try to make
this less likely to occur by explicitly clearing BSS table at the end of
test cases that use different regulatory domain. This makes P2P test
cases that verify channel selection based on world roaming rules more
robust.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:32:01 +02:00
Jouni Malinen
f8423317b3 tests: WNM_SLEEP error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 23:03:10 +02:00
Jouni Malinen
e61f90875b tests: Disabling WNM keep-alive and hostapd doing client poll
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:51:21 +02:00
Jouni Malinen
df4733dff9 tests: WNM BSS TM Req with non-global operating class table
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-24 10:58:33 +02:00
Jouni Malinen
13f8d51e2d tests: BSS Transition Management
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
73360424d9 tests: Fix a typo in function name
except_ack() was supposed to be verifying that the frame was ACK'ed,
i.e., it was really supposed to be called expect_ack().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
ab4ee34306 tests: Fix wnm_bss_tm_req status code expectation
The implementation of WNM BSS transition management was extended to be
able to return a reject status code based on whether a matching entry is
found. The test case wnm_bss_tm_req was trying to enforce a different
status code to be used here based on old implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
519c3f7044 tests: WNM keep-alive
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
a27f9f7ac8 tests: WNM_SLEEP with additional parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
d8e0013e41 tests: WNM BSS TM Req with neighbor report subelements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:35:01 +03:00
Jouni Malinen
2de01c9d82 tests: BSS Transition Management Request protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 13:40:58 +03:00
Jouni Malinen
b2edaa4333 tests: Add wlantest passphrase info for WNM Sleep Mode with PMF
This makes the sniffer capture more convenient with the Action frames
decrypted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
6435799b85 tests: Add WNM test cases
These are not yet complete, but at least some frame exchanges can
be verified for WNM operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 20:04:27 +02:00