Commit graph

13023 commits

Author SHA1 Message Date
Jouni Malinen
14f8e08128 tests: Fix spelling of sigma_dut DPPConfEnrolleeRole argument
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 19:13:50 +02:00
Sriram R
e053465835 tests: Fix ap_config_reload_on_sighup test
Use absolute path name for configuration file to ensure the file can be
succesfully reloaded and read on SIGHUP signal. This is needed when
running the test case on host (i.e., not using a VM).

Signed-off-by: Sriram R <srirrama@qti.qualcomm.com>
2017-11-17 19:13:10 +02:00
Jouni Malinen
21fd5576a5 tests: sigma_dut and group cipher override on AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:44:50 +02:00
Jouni Malinen
6af3b5934b tests: sigma_dut and AP enabling two pairwise ciphers
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:33:54 +02:00
Jouni Malinen
5068af8536 tests: hostapd group_cipher override
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:33:54 +02:00
Jouni Malinen
27781c0ab5 Allow group cipher selection to be overridden
The new hostapd configuration parameter group_cipher can now be used to
override the automatic cipher selection based on enabled pairwise
ciphers. It should be noted that selecting an unexpected group cipher
can result in interoperability issues and this new capability is mainly
for testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:31:41 +02:00
Jouni Malinen
aab6612836 wlantest: Search bss/sta entry more thoroughly for 4-address frames
Previous design worked for the case where only one of the devices was
beaconing, but failed in one direction to find the PTK if both devices
beaconed. Fix this by checking the A1/A2 fields in both directions if
the first pick fails to find the sta entry.

In addition, select the proper rsc value (rsc_tods vs. rsc_fromds) based
on A2 (TA) value for ToDS+FromDS frames to avoid reporting incorrect
replay issues.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-15 02:12:20 +02:00
Edayilliam Jayadev
af6614ca10 Fix block comment style in QCA vendor attribute definition
Fix the block comment style issue introduced as part of commit
fbfceef3af ("Add QCA vendor commands for
spectral scan").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:55:30 +02:00
tinlin
2115603a45 Add QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Add sub-command QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING to flush
pending packets in firmware. The attributes are listed in enum
qca_wlan_vendor_attr_flush_pending. The QCA_WLAN_VENDOR_ATTR_PEER_ADDR
specifies the peer MAC address and the QCA_WLAN_VENDOR_ATTR_AC specifies
the access category of the pending packets.

Signed-off-by: Lin Tingting <tinlin@qti.qualcomm.com>
2017-11-14 18:52:59 +02:00
Zhang Qian
27987b67fa Add new QCA vendor attribute for LL stats
A new vendor attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU
is added for vendor sub-command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET.
This attribute is for pending MSDUs corresponding to respective AC.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-14 18:48:55 +02:00
Ashok Kumar Ponnaiah
41db74cf76 atheros: Process SAE authentication frames using EVENT_RX_MGMT
This adds support for SAE in AP mode with the atheros driver interface.
EVENT_RX_MGMT includes SAE processing while EVENT_AUTH would require
more changes to make this work.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:47:07 +02:00
Ashok Kumar Ponnaiah
3d9dd4b772 atheros: Generate EVENT_TX_STATUS events for management frames
This is needed for DPP functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:44:05 +02:00
Beniamino Galvani
f5b74b966c common: Avoid conflict with __bitwise macro from linux/types.h
Undefine the __bitwise macro before defining it to avoid conflicts
with the one from linux/types.h; the same is done some lines above
when __CHECKER__ is defined. Fixes the following warning:

  In file included from ../src/l2_packet/l2_packet_linux.c:15:0:
  hostap/src/utils/common.h:438:0: warning: "__bitwise" redefined
   #define __bitwise

  In file included from /usr/include/linux/filter.h:9:0,
                   from ../src/l2_packet/l2_packet_linux.c:13:
  /usr/include/linux/types.h:21:0: note: this is the location of the previous definition
   #define __bitwise __bitwise__

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2017-11-14 18:23:47 +02:00
Masashi Honma
4109555ef7 DPP: Fix compiler warning of testing code
../src/common/dpp.c: In function 'dpp_test_gen_invalid_key':
../src/common/dpp.c:5531:10: warning: return makes integer from pointer without a cast [-Wint-conversion]
   return NULL;
          ^

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-11-14 18:22:58 +02:00
Jouni Malinen
878723b920 wlantest: Do not ignore RSN/WPA/OSEN element before full BSS info
wlantest used to ignore RSN/WPA/OSEN element in (Re)Association Request
frame if no Beacon frame had been seen from the AP before the
association exchange. This could result in not being able to derive keys
properly. Work around this by skipping that step if the BSS entry is not
yet complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:55:48 +02:00
Jouni Malinen
5420bcf477 wlantest: Remove unnecessary duplication of tk_len from STA entries
The length of the TK is available within struct wpa_ptk, so there is no
need to try to maintain it separately in wlantest.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:54:45 +02:00
Jouni Malinen
1d624a0702 Reject PMK-to-PTK derivation with unsupported cipher
There should be no wpa_pmk_to_ptk() calls with the cipher argument
indicating a cipher that is not allowed as a pairwise cipher. However,
it looks like that was possible to happen with wlantest. Check for this
corner case explicitly to avoid generating confusing debug logs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:50:30 +02:00
Jouni Malinen
71db91db96 tests: sigma_dut DPP/QR (mutual) responder (response pending sequence)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 19:16:35 +02:00
Jouni Malinen
b014624bd5 tests: sigma_dut DPP/QR responder (channel list override)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 18:44:24 +02:00
Jouni Malinen
3eae3ee2e3 tests: DPP protocol testing - Auth Conf replaced by Res
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:55:56 +02:00
Jouni Malinen
762fb4f066 DPP: Testing capability to send unexpected Authentication Response
This is for protocol testing to check what happens if the Responser
receives an unexpected Authentication Response instead of Authentication
Confirm.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:55:56 +02:00
Jouni Malinen
03abb6b541 DPP: Reject unexpected Req/Resp message based on Auth/PKEX role
This prevents issues where an unexpected message in the DPP
Authentication exchange or PKEX could result in undefined behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:55:56 +02:00
Jouni Malinen
ba37ba419a tests: DPP Authentication Response retries
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:35:26 +02:00
Jouni Malinen
95b0104a34 DPP: Retransmit DPP Authentication Response frame if it is not ACKed
This extends wpa_supplicant DPP implementation to retransmit DPP
Authentication Response frame every 10 seconds up to 5 times if the peer
does not reply with DPP Authentication Confirm frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:35:26 +02:00
Jouni Malinen
c1d3773967 DPP: Stop authentication exchange of DPP_STOP_LISTEN
Previously, this command stopped listen operation immediately, but if
there was an ongoing authentication exchange, a new listen operation was
started. This is not really expected behavior, so stop the
authentication exchange first with this command to avoid restarting
listen operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:35:26 +02:00
Jouni Malinen
51fbcad457 tests: DPP with Initiator in either role
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:35:22 +02:00
Jouni Malinen
d1f082644c DPP: Allowed initiator to indicate either role
The new role=either parameter can now be used with DPP_AUTH_INIT to
indicate that the initiator can take either the Configurator or Enrollee
role.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 11:45:05 +02:00
Jouni Malinen
751f7f7c42 tests: DPP bootstrapping info channel list
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 11:45:05 +02:00
Jouni Malinen
f97ace34cb DPP: Support multiple channels for initiating DPP Authentication
This extends wpa_supplicant to iterate over all available channels from
the intersection of what the peer indicates and the local device
supports when initiating DPP Authentication. In addition, retry DPP
Authentication Request frame up to five times if no response is
received.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 11:45:05 +02:00
Jouni Malinen
de02986189 DPP: Share a helper function for PKEX final steps
Generate the PKEX bootstrapping information and release the PKEX session
in a helper function that both the initiator and responder can use
instead of maintaining this functionality separately in two places.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 10:30:11 +02:00
Jouni Malinen
a0604a4236 tests: sigma_dut DPP protocol testing - Peer Discovery Request
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-06 12:59:12 +02:00
Jouni Malinen
993eab91a4 tests: DPP protocol testing - network introduction
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-06 12:40:47 +02:00
Jouni Malinen
a306ed5a58 DPP: Protocol testing to allow missing attributes in peer discovery
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-06 12:40:18 +02:00
Jouni Malinen
8c735316af tests: sigma_dut and DPP protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-06 00:35:58 +02:00
Jouni Malinen
b900fb1a43 tests: sigma_dut controlled AP as DPP PKEX responder
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-04 12:33:03 +02:00
Jouni Malinen
efa77d0abf tests: hostapd as DPP Responder requiring mutual authentication
This verifies the qr=mutual case with STATUS_RESPONSE_PENDING.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-04 12:33:03 +02:00
Jouni Malinen
1fafdf1124 DPP: Add DPP_LISTEN and DPP_STOP_LISTEN to hostapd
This is an initial step in allowing non-operating channel operations
with DPP when hostapd is the Responder. For now, this is only used for
specifying role=configurator/enrollee and qr=mutual cases similarly to
the wpa_supplicant configuration for in Responder role. Request to use a
non-operating channel will be rejected.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-04 12:33:03 +02:00
Edayilliam Jayadev
fbfceef3af Add QCA vendor commands for spectral scan
Add the following vendor commands and their vendor attributes for
spectral scan.

 1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
        Get current values of spectral parameters.
 2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
        Get stats for spectral scan debug.
 3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
        Get the spectral hardware capability.
 4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
        Get the current status of spectral scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:47:32 +02:00
Sunil Dutt
bb9808fa9f P2P: Continue P2P_WAIT_PEER_(IDLE/CONNECT) sequence on a listen cancel
Some drivers may accept the remain-on-channel command, but instead of
indicating start event for remain-on-channel, just indicate that the
operation has been canceled immediately. This listen cancel from the
WAIT_PEER_CONNECT state ended up in discontinuation of further
WAIT_PEER_IDLE/WAIT_PEER_CONNECT state transitions. Hence, delay the
subsequent IDLE state by 100 ms.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:47:32 +02:00
Sunil Dutt
37ed3254de P2P: ACS offload for the autonomous GO
This commit introduces the ACS functionality for the autonomous GO. The
optional parameter <freq> in p2p_group_add is enhanced to carry a value
"acs" with the intention to select the channels among any supported
band. freq = 2 / 5 carry the need to select the channels only in the
respective bands 2.4 / 5 GHz. This functionality is on top of the host
driver's capability to offload ACS, which is advertized through
WPA_DRIVER_FLAGS_ACS_OFFLOAD.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:47:32 +02:00
Zhang Qian
962b8fcf49 Add new QCA vendor attributes for MAC counters
Add QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME
and QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME to record
timestamp and duration for the last MAC counters. Some user layer
application is delay sensitive. It needs to know time stamp and
measurment duration for the counters.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-03 21:21:55 +02:00
Jouni Malinen
686cfce934 tests: DPP Protocol testing for invalid Config Resp attribute values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:14:08 +02:00
Jouni Malinen
af7f10fcdf DPP: Protocol testing for invalid Config Resp attribute values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:14:08 +02:00
Jouni Malinen
bdf987b737 tests: DPP Config Request/Response missing attributes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:14:08 +02:00
Jouni Malinen
8c99e6264a DPP: Report Config Request/Response failure reasons on control interface
This provides more details of failures to upper layer components.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:04:17 +02:00
Jouni Malinen
f411ad1b86 DPP: Protocol testing to remove attributes from Config Req/Resp
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:04:17 +02:00
Jouni Malinen
c20d3ca8f7 tests: DPP protocol - I/R-auth tag mismatch in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 20:18:52 +02:00
Jouni Malinen
7e0ebe21b0 DPP: Protocol testing - invalid I/R-Auth value in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 20:18:24 +02:00
Jouni Malinen
fd4639aaa0 tests: DPP protocol - invalid Bootstrap Key in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
89d0bf6783 DPP: Protocol testing - invalid Bootstrap Key value in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00