Commit graph

747 commits

Author SHA1 Message Date
Michal Kazior
1b45b8d3f6 wpa_supplicant: Don't exit scanning state on config reload
There's a chance that prior to config reload being requested a scan work
was started. As such forcing wpa_supplicant to WPA_DISCONNECTED was
removing any hints that the actual driver is busy with work. That led to
wpa_supplicant reporting "Failed to initialize AP scan" over and over
again for a few seconds (depending on driver/capabilities) until the
untracked scan finished.

Cancelling a scan isn't really a solution because there's a bunch of
scanning state bits sprinkled across wpa_supplicant structure and they
get updated as driver events actually flow in in async manner.

As far as I can tell this is only preventing unnecessary warning
messages. This doesn't seem like it was crippling any logic per se.

Signed-off-by: Michal Kazior <michal@plume.com>
2021-02-13 23:12:38 +02:00
Pradeep Kumar Chitrapu
35756c02ea mesh: Assign channel in frequency params in all bands
Previously, the channel number was set in hostapd_freq_params only with
the presence of HT capabilities. Set the channel number before the check
for HT mode to accommodate the 6 GHz band cases.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2021-02-10 00:25:36 +02:00
Jouni Malinen
48cfb52b7e Rename blacklist.[ch] to bssid_ignore.[ch]
This completes renaming of this functionality for a list of temporarily
ignored BSSIDs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 17:28:45 +02:00
Jouni Malinen
626fc0dcd0 Rename wpa_blacklist to wpa_bssid_ignore
This is more accurate name for this functionality of temporarily
ignoring BSSIDs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 17:28:45 +02:00
Jouni Malinen
8f557d2047 Make wpa_bss_ext_capab() handle NULL bss argument
This simplifies the callers that use wpa_s->current_bss (which could be
NULL).

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-06 12:09:30 +02:00
David Su
11355a122d Reset external_scan_running on interface deletion
Currently, the external_scan_running flag is not reset when an interface
is removed. Thus, if a connection attempt is made on another iface, it
will fail due to wpa_supplicant incorrectly assuming the radio is still
busy due to the ongoing scan.

To fix this, convert external_scan_running to a pointer to the interface
that started the scan. If this interface is removed, also reset the
pointer to NULL so that other operations may continue on this radio.

Test:
  1. Start scan on wlan0
  2. Remove wlan0
  3. Can connect to a network on wlan1

Signed-off-by: David Su <dysu@google.com>
2021-02-02 23:48:14 +02:00
Ilan Peer
363768c8ac PASN: Add support for PASN processing to wpa_supplicant
Add PASN implementation to wpa_supplicant

1. Add functions to initialize and clear PASN data.
2. Add functions to construct PASN Authentication frames.
3. Add function to process PASN Authentication frame.
4. Add function to handle PASN frame TX status.
5. Implement the station side flow processing for PASN.

The implementation is missing support for wrapped data and PMKSA
establishment for base AKMs, and only supports PASN authentication or
base AKM with PMKSA caching.

The missing parts will be added in later patches.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 19:15:44 +02:00
Ilan Peer
d70060f966 WPA: Add PTKSA cache to wpa_supplicant for PASN
PASN requires to store the PTK derived during PASN authentication
so it can later be used for secure LTF etc. This is also true
for a PTK derived during regular connection.

Add an instance of a PTKSA cache for each wpa_supplicant
interface when PASN is enabled in build configuration.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 18:36:40 +02:00
Sunil Dutt
62657365f8 Add a configuration to disconnect on deinit if WoWLAN is enabled
Commit 02c21c02d0 ("wpa_supplicant: Do not disconnect on deinit if
WoWLAN is enabled") prevents the disconnection on deinit if the driver
indicates that WoWLAN is enabled. This is not the expected behavior in
some earlier use cases where the wpa_supplicant process is left running
when going to sleep and killing of the wpa_supplicant process is used
only when there is an expectation of Wi-Fi connection being disabled.

To support the use cases which require the WLAN to disconnect on deinit
even if WoWLAN is enabled, introduce a configuration parameter
wowlan_disconnect_on_deinit. This is set to 0 by default thereby not
impacting the functionality in the above mentioned commit. Setting it to
1 restores the old behavior before the commit identified above.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2021-01-21 18:21:30 +02:00
Shiva Sankar Gajula
71718b628b FT: Update key mgmt properly in RSNE during roaming
When STA is performing roam from WPA3 AP to WPA2 AP, the STA was
including key mgmt FT-SAE instead of FT-PSK in FT Authentication request
RSNE when using driver-based SME. This is because the RSNE/MDE/FTE were
updated and forwarded to the driver using the NL80211_CMD_UPDATE_FT_IES
command before updating key mgmt properly. Because of this, the AP is
rejecting FT Authentication request with WLAN_REASON_UNSPECIFIED reason
code which is due to the invalid keymgmt in RSNE.

Fix this by reordering IE population to happen earlier in the sequence
so that the updated key mgmt information can be provided when using
NL80211_CMD_UPDATE_FT_IES.

Signed-off-by: Shiva Sankar Gajula <sgajula@codeaurora.org>
2021-01-15 12:10:10 +02:00
Jouni Malinen
6ead8b897f Use bool for is_6ghz variables and functions
Replace the implicit boolean checks that used int variables with use of
a more explicit bool variable type.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-12-11 19:56:14 +02:00
Veerendranath Jakkam
7131fede34 Extend the setband support for 6 GHz and band combinations
Support possible band combinations of 2.4 GHz, 5 GHz, and 6 GHz with
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK attribute. Ensure backwards
compatibility with old drivers that are using
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE attribute and supporting only 2.4 GHz
and 5 GHz bands.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-12-11 19:56:14 +02:00
Markus Theil
0896c442dc mesh: Fix for mesh init/deinit
Send mesh group started notification after join completion
callback is called.

Implement outstanding TODO, to leave the mesh network on deinit.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-12-01 00:23:15 +02:00
Jouni Malinen
be7ee264f6 BSS: Use wrapper function for getting a pointer to the IE buffer
This makes it easier to change the internal struct wpa_bss design for
storing the variable length IE buffers.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-11-16 16:21:56 +02:00
Jouni Malinen
95edd81441 BSS: Add wpa_bss_get_ie_ext() wrapper
This removes need from the callers to know the struct wpa_bss details
for the location of the memory area for storing the IEs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-11-16 16:00:21 +02:00
Rohan Dutta
fdf114641f nl80211: Send the sae_pwe value to the driver
Use NL80211_ATTR_SAE_PWE attribute to indicate the sae_pwe value
to the driver during the NL80211_CMD_START_AP and NL80211_CMD_CONNECT
in WPA3-Personal networks which are using SAE authentication.

Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
2020-11-16 15:50:44 +02:00
Jouni Malinen
f724dd1bfd Remove unused variable update
Commit e8b85c078e ("iface match: Unspecified matched interfaces should
not log driver fails") removed the only use of the added interface wpa_s
pointer, but left that pointer setting in place. Remove it to keep
static analyzers happy.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-11-02 16:36:14 +02:00
Brian Norris
4b96fafcd8 D-Bus: Share 'remove all networks' with CLI
The D-Bus implementation of RemoveAllNetworks differs wildly from the
CLI implementation. Let's share the implementations.

This resolves use-after-free bugs I noticed, where we continue to use
the 'wpa_s->current_ssid' wpa_ssid object after freeing it, because we
didn't bother to disconnect from (and set to NULL) current_ssid before
freeing it.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:39:00 +03:00
Kevin Lund
cff545720e wpa_supplicant: Clear blacklist when SSID configs change
If the stored configurations for an SSID have changed, we can no longer
trust the current blacklist state of that SSID, since the updated
configs could change the behavior of the network. E.g., the BSS could be
blacklisted due to a bad password, and the config could be updated to
store the correct password. In this case, keeping the BSS in the
blacklist will prevent the user from connecting to the BSS after the
correct password has been updated.

Add the value was_changed_recently to the wpa_ssid struct. Update this
value every time a config is changed through wpa_set_config(). Check
this value in wpa_blacklist_get() to clear the blacklist whenever the
configs of current_ssid have changed.

This solution was chosen over simply clearing the blacklist whenever
configs change because the user should be able to change configs on an
inactive SSID without affecting the blacklist for the currently active
SSID. This way, the blacklist won't be cleared until the user attempts
to connect to the inactive network again. Furthermore, the blacklist is
stored per-BSSID while configs are stored per-SSID, so we don't have the
option to just clear out certain blacklist entries that would be
affected by the configs.

Finally, the function wpa_supplicant_reload_configuration() causes the
configs to be reloaded from scratch, so after a call to this function
all bets are off as to the relevance of our current blacklist state.
Thus, we clear the entire blacklist within this function.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
d530110028 wpa_supplicant: Implement time-based blacklisting
wpa_supplicant keeps a blacklist of BSSs in order to prevent repeated
associations to problematic APs*. Currently, this blacklist is
completely cleared whenever we successfully connect to any AP. This
causes problematic behavior when in the presence of both a bad AP and
a good AP. The device can repeatedly attempt to roam to the bad AP
because it is clearing the blacklist every time it connects to the good
AP. This results in the connection constantly ping-ponging between the
APs, leaving the user stuck without connection.

Instead of clearing the blacklist, implement timeout functionality which
allows association attempts to blacklisted APs after some time has
passed. Each time a BSS would be added to the blacklist, increase the
duration of this timeout exponentially, up to a cap of 1800 seconds.
This means that the device will no longer be able to immediately attempt
to roam back to a bad AP whenever it successfully connects to any other
AP.

Other details:
The algorithm for building up the blacklist count and timeout duration
on a given AP has been designed to be minimally obtrusive. Starting with
a fresh blacklist, the device may attempt to connect to a problematic AP
no more than 6 times in any ~45 minute period. Once an AP has reached a
blacklist count >= 6, the device may attempt to connect to it no more
than once every 30 minutes. The goal of these limits is to find an
ideal balance between minimizing connection attempts to bad APs while
still trying them out occasionally to see if the problems have stopped.

The only exception to the above limits is that the blacklist is still
completely cleared whenever there are no APs available in a scan. This
means that if all nearby APs have been blacklisted, all APs will be
completely exonerated regardless of their blacklist counts or how close
their blacklist entries are to expiring. When all nearby APs have been
blacklisted we know that every nearby AP is in some way problematic.
Once we know that every AP is causing problems, it doesn't really make
sense to sort them beyond that because the blacklist count and timeout
duration don't necessarily reflect the degree to which an AP is
problematic (i.e. they can be manipulated by external factors such as
the user physically moving around). Instead, its best to restart the
blacklist and let the normal roaming algorithm take over to maximize
our chance of getting the best possible connection quality.

As stated above, the time-based blacklisting algorithm is designed to
be minimally obtrusive to user experience, so occasionally restarting
the process is not too impactful on the user.

*problematic AP: rejects new clients, frequently de-auths clients, very
poor connection quality, etc.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
2fd35d9857 wpa_supplicant: Track consecutive connection failures
Within wpas_connection_failed(), the 'count' value of wpa_blacklist is
erroneously used as a tally of the number times the device has failed
to associate to a given BSSID without making a successful connection.
This is not accurate because there are a variety of ways a BSS can be
added to the blacklist beyond failed association such as interference
or deauthentication. This 'count' is lost whenever the blacklist is
cleared, so the wpa_supplicant stores an additional value
'extra_blacklist_count' which helps persist the 'count' through clears.
These count values are used to determine how long to wait to rescan
after a failed connection attempt.

While this logic was already slightly wrong, it would have been
completely broken by the upcoming change which adds time-based
blacklisting functionality. With the upcoming change, 'count' values
are not cleared on association, and thus do not necessarily even
approximate the "consecutive connection failures" which they were being
used for.

This change seeks to remove this unnecessary overloading of the
blacklist 'count' by directly tracking consecutive connection failures
within the wpa_supplicant struct, independent of the blacklist. This new
'consecutive_conn_failures' is iterated with every connection failure
and cleared when any successful connection is made. This change also
removes the now unused 'extra_blacklist_count' value.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Roy Marples
e8b85c078e iface match: Unspecified matched interfaces should not log driver fails
If there is no matching interface given, but interface matching is
enabled, all interfaces on the system will try to be initialized. Non
wireless interfaces will fail and the loopback device will be one of
these, so just log a diagnostic rather than an error.

Signed-off-by: Roy Marples <roy@marples.name>
2020-10-09 16:50:36 +03:00
Matthew Wang
4756ecabcf Allow bgscan parameters to be reconfigured
Teach wpa_supplicant to {de,}initialize bgscans when bgscan parameters
are set after initial connection.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Beniamino Galvani
1c58317f56 D-Bus: Allow changing an interface bridge via D-Bus
D-Bus clients can call CreateInterface() once and use the resulting
Interface object to connect multiple times to different networks.

However, if the network interface gets added to a bridge, clients
currently have to remove the Interface object and create a new one.

Improve this by supporting the change of the BridgeIfname property of
an existing Interface object.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2020-10-09 15:18:10 +03:00
Veerendranath Jakkam
93a73ce028 MSCS: Fix issues due to incorrect usage of wpa_hexdump_buf()
Previously wpabuf_head() of the buffer is passed to wpa_hexdump_buf()
instead of the wpabuf struct itself and it was causing wpa_supplicant to
crash. Fix this by using the correct pointer in the debug prints.

Fixes: a118047245 ("MSCS: Add support to send MSCS Request frames")
Fixes: c504ff5398 ("MSCS: Add support to populate MSCS Descriptor IE in (Re)AssocReq")
Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-09-08 19:38:35 +03:00
Vinita S. Maloo
d21dde9dac MSCS: Send MSCS change/remove frames only if MSCS setup exists
Allow MSCS change/remove request to be sent only after an initial setup,
i.e., after an add request has been accepted.

Signed-off-by: Vinita S. Maloo <vmaloo@codeaurora.org>
2020-08-14 11:53:37 +03:00
Vinita S. Maloo
c504ff5398 MSCS: Add support to populate MSCS Descriptor IE in (Re)AssocReq
Include the MSCS Descriptor IE in the (Re)Association Request frames to
setup MSCS between the AP and the STA during association.

Signed-off-by: Vinita S. Maloo <vmaloo@codeaurora.org>
2020-08-14 11:53:37 +03:00
Vinita S. Maloo
a118047245 MSCS: Add support to send MSCS Request frames
Add support to send MSCS add/change/remove types of Action frames
to the connected AP.

Signed-off-by: Vinita S. Maloo <vmaloo@codeaurora.org>
2020-08-14 11:53:35 +03:00
Jouni Malinen
2a58968d39 SAE-PK: Allow SAE-PK password to be set using the psk parameter
Only the sae_password parameter was previously accepted for SAE-PK use.
That is not sufficient for covering mixed SAE+PSK cases. Extend this by
allowing the psk parameter to be used as well just like it can be used
for SAE without SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-07 00:49:00 +03:00
Veerendranath Jakkam
b28b9dfcbf OCV: OCI channel override support for testing (STA)
Add override parameters to use the specified channel while populating
OCI element in EAPOL-Key group msg 2/2, FT reassoc request, FILS assoc
request and WNM sleep request frames.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-08-03 11:02:13 +03:00
Jouni Malinen
f4877083ec Rename driver op for temporarily disallowed BSSIDs
Use the "tmp_disallow" name more consistently so that both the core
wpa_supplicant functionality (struct wpa_bss_tmp_disallowed) and the
wpa_driver_ops callback have more similar names.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:26:09 +03:00
Vinita S. Maloo
d0819a11cc FILS: Use FILS auth alg when connecting using PMKSA caching
When a PMKSA cache entry is available and used for connection with FILS
key management suite, use FILS authentication algorithm for connection
even if ERP keys are not available. This scenario may happen when
applications using wpa_supplicant cache persistently only PMKSA but not
ERP keys and reconfigures wpa_supplicant with PMKSA cache after
restarting wpa_supplicant.

The previous implementation correctly handles SME-in-wpa_supplicant
cases. However, SME-in-driver cases, complete FILS authentication
without PMKSA caching is performed.

Fix SME-in-driver behavior by setting authentication algorithm to
WPA_AUTH_ALG_FILS when connecting to a FILS AP using PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-24 00:29:58 +03:00
Jouni Malinen
518be614f1 SAE-PK: Advertise RSNXE capability bit in STA mode
Set the SAE-PK capability bit in RSNXE when sending out (Re)Association
Request frame for a network profile that allows use of SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
e7aeb6d8ac SAE-PK: STA functionality
This adds STA side functionality for SAE-PK. This version enables SAE-PK
automatically based on the configured SAE password value if the selected
AP advertises support for SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Vamsi Krishna
2d118f557a OCV: Add support to override channel info OCI element (STA)
To support the STA testbed role, the STA has to use specified channel
information in OCI element sent to the AP in EAPOL-Key msg 2/4, SA Query
Request, and SA Query Response frames. Add override parameters to use
the specified channel while populating OCI element in all these frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:01:44 +03:00
Jouni Malinen
12c8eacf73 DPP: Allow version number to be overridden for testing purposes
"SET dpp_version_override <ver>" can now be used to request
wpa_supplicant and hostapd to support a subset of DPP versions. In
practice, the only valid case for now is to fall back from DPP version 2
support to version 1 in builds that include CONFIG_DPP2=y.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:45 +03:00
Jouni Malinen
143e3d8bc5 DPP2: Add DPP KDE into EAPOL-Key msg 2/4 when using DPP AKM
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:44 +03:00
Jouni Malinen
1f5f000086 DPP2: Try to negotiate PFS only if AP supports version 2 or newer
Check AP's DPP Protocol Version during network introduction and mark the
PMKSA cache as suitable for PFS use with version 2 or newer. This avoids
unnecessary attempt of negotiating PFS with version 1 APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:44 +03:00
Jouni Malinen
3d58e8286f FILS: Convert Boolean to C99 bool
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-24 17:06:50 +03:00
Jouni Malinen
da8478a1ab EAPOL supp: Convert Boolean to C99 bool
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-24 17:06:50 +03:00
Jouni Malinen
37e3501bf7 FST: Convert Boolean to C99 bool
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-24 17:06:50 +03:00
Jouni Malinen
2c70b7d0b4 Do not open l2_packet(EAPOL) for receive unnecessarily
If the driver supports control port for EAPOL RX, do not register
l2_packet for RX to minimize unnecessary operation load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 17:42:41 +03:00
Jouni Malinen
c3bb8865a0 Clean up l2_packet_get_own_addr() call
There is no need for this to be outside the if block that is used to
check whether l2_packet is used for the interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 16:50:56 +03:00
Jouni Malinen
9d6334e811 Do not open l2_packet bridge workaround socket if control port is used
This allows wpa_supplicant to avoid the packet socket workaround for
cases where a bridge interface is used if the driver supports control
port for EAPOL frame TX and RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 16:50:56 +03:00
Jouni Malinen
bb9e3935dd driver: Add second driver capability flags bitmap
All 64 bits of the capability flags bitmap are used, so add a new
variable to hold future capability bits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 15:53:02 +03:00
Jouni Malinen
b2d8dc59f4 FT: Testing override for RSNXE Used subfield in FTE
Allow wpa_supplicant to be requested to override the RSNXE Used subfield
in FT reassociation case for testing purposes with "SET ft_rsnxe_used
<0/1/2>" where 0 = no override, 1 = override to 1, and 2 = override to
0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-14 16:37:35 +03:00
P Praneesh
7c8f540ee0 wpa_supplicant: Add HE override support
Add HE override support under the build parameter CONFIG_HE_OVERRIDES=y.
The disable_he=1 network profile parameter can be used to disable HE.
This requires a fallback to VHT on the 5 GHz band and to HT on the 2.4
GHz band.

There is no nl80211 support for configuring the driver to disable HE, so
for now, this applies only to IBSS and mesh cases.

Signed-off-by: P Praneesh <ppranees@codeaurora.org>
2020-03-30 12:55:01 +03:00
Jouni Malinen
5058f771d9 DPP2: Allow station to require or not allow PFS
The new wpa_supplicant network profile parameter dpp_pfs can be used to
specify how PFS is applied to associations. The default behavior
(dpp_pfs=0) remains same as it was previously, i.e., try to use PFS if
the AP supports it. PFS use can now be required (dpp_pfs=1) or disabled
(dpp_pfs=2).

This is also working around an interoperability issue of DPP R2 STA with
certain hostapd builds that included both OWE and DPP functionality.
That issue was introduced by commit 09368515d1 ("OWE: Process
Diffie-Hellman Parameter element in AP mode") and removed by commit
16a4e931f0 ("OWE: Allow Diffie-Hellman Parameter element to be
included with DPP"). hostapd builds between those two commits would
reject DPP association attempt with PFS. The new wpa_supplicant default
(dpp_pfs=0) behavior is to automatically try to connect again with PFS
disabled if that happens.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-28 17:23:22 +02:00
Alexander Wetzel
8ca6f924d6 STA: Fix wpa_clear_keys() PTK key deletion logic
We have to delete PTK keys when either BIT(0) or BIT(15) are zero and
not only when both are zero.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-26 00:33:17 +02:00
Alexander Wetzel
b17b7a8e53 STA: Support Extended Key ID
Support Extended Key ID in wpa_supplicant according to
IEEE Std 802.11-2016 for infrastructure (AP) associations.

Extended Key ID allows to rekey pairwise keys without the otherwise
unavoidable MPDU losses on a busy link. The standard is fully backward
compatible, allowing STAs to also connect to APs not supporting it.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-23 11:47:31 +02:00