Commit graph

5738 commits

Author SHA1 Message Date
Johannes Berg
10e694a618 AP: Use monotonic clock for SA query timeout
The usual, any timeouts should be using monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
af5389610b Use monotonic clock for RADIUS cache timeouts
Use monotonic clock for both cache and query timeouts.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
fe52c210cf Use monotonic clock for last_sae_token_key_update
Just the usual, with a new function os_reltime_initialized()
thrown in that checks whether time has ever been retrieved
(time can't be completely zero).

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
100298e896 AP: Use monotonic time for AP list
Use the new monotonic time to keep track of when an AP
entry expires.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
e5c9e401a4 OS utils: Add os_reltime_expired()
This helper functions checks whether a given entry has expired,
given the last active timestamp, the current time, and a timeout.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:14 -08:00
Johannes Berg
b3493fa110 AP: Use monotonic time for STA connected time
Connected time is relative, so should be using monotonic time
rather than time of day.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:14 -08:00
Johannes Berg
ed0ebee14f OS utils: Provide os_reltime_age()
This function calculates and returns the time passed since
a given timestamp.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 18:55:58 -08:00
Jithu Jance
8567866d75 P2P: Handle frequency conflict in single channel concurrency case
Based on priority, remove the connection with least priority whenever
a frequency conflict is detected.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-12-07 18:55:58 -08:00
Dmitry Shmidt
b125c48fce P2P: Add wfd_dev_info= field for device found event
This field allows adds enough information into the P2P-DEVICE-FOUND
events to figure out if the peer supports Wi-Fi Display.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-12-07 17:57:55 -08:00
Masashi Honma
e706d2d30d bsd: Fix compilation error for NetBSD
Commit 5dd82c634c causes compilation error
on NetBSD 6.1.2. Fix compilation with #ifdef blocks.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-12-07 17:46:41 -08:00
Johannes Berg
667a158d08 tests: VM test script: Copy gcov data if present
If there's code coverage analysis data, copy it out of the VM
to be able to analyse it later. Also add a description to the
README file about how to use it.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 17:45:12 -08:00
Naresh Jayaram
f7579502a6 eap_proxy: Extend Android.mk to support additional libraries
Allow addition static and shared libraries to be specified from the
eap_proxy_*.mk file for Android build. In addition use $(LOCAL_PATH) as
a prefix for that Android makefile part.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-07 16:54:24 -08:00
Jouni Malinen
50acc38469 tests: Remove special start.sh option for concurrent P2P tests
These were not really used in practice and better quality test cases for
concurrent P2P operations are now available in tests_p2p_concurrency.py
using the standard test framework design. Remove the special concurrent
option for start.sh and the run-all.sh concurrent and
concurrent-valgrind operations to clean up scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
41af1305d7 tests: Add test cases for concurrent P2P operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
0ad3b9c402 Use wpa_radio data for get_shared_radio_freqs()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
1b544ffa74 Use wpa_radio data for wpas_wpa_is_in_progress()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
5b81927d58 Use wpa_radio data for wpas_p2p_search_delay()
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
c67e7e2a23 Use wpa_radio data for channel list updates
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
f88f19b465 Use wpa_radio data for scan result updates
This replaces the now unnecessary iteration of get_radio_name() calls.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
202dec2a94 Add shared per-radio structure for wpa_supplicant
struct wpa_radio is used as a shared data structure between all struct
wpa_supplicant instances that share the same physical radio.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:14 +02:00
Jouni Malinen
73c00fd794 Move wpa_supplicant driver initialization into a helper function
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:36:29 +02:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Jouni Malinen
d9c753b4f5 EAP server: Handle EAP method initialization failures more cleanly
Allow another EAP method to be tried if one of the enabled methods
fails. If all the remaining methods fail, reject connection by adding a
new METHOD_REQUEST -> FAILURE transition. Previously, this case resulted
in the state machine trying to send a message when none was available
and then waiting for a following event until timeout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 18:26:05 +02:00
Jouni Malinen
59d343858d EAP server: Initialize TLS context based on private_key
It is possible for the authentication server to be configured with a
PKCS #12 file that includes a private key, a server certificate, and a
CA certificate. This combination could result in server_cert and ca_cert
parameters not being present and that should still result in TLS context
getting initialized.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 18:08:45 +02:00
Jouni Malinen
6b417a1b77 Reject TLS-based EAP server method if TLS context not initialized
It was possible to configure hostapd in a way that could try to
initialize a TLS-based EAP method even when TLS library context was not
initialized (e.g., due to not configuring server or CA certificate).
Such a case could potentially result in NULL pointer dereference in the
TLS library, so check for this condition and reject EAP method
initialization.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 18:01:12 +02:00
Jouni Malinen
19ae1d0788 tests: Verify P2P operations with a separate group interface
This extends P2P test coverage to include the case of separate group
interface use with autonomous GO and group formation through GO
negotiation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 15:32:52 +02:00
Jouni Malinen
158b090cda nl80211: Fix regression in P2P group interface removal
Commit 390e489c0d extended hostapd BSS
interface removal capabilities. However, it ended up causing a
regression in wpa_supplicant P2P group interface handling. That P2P
group interface is removed through another driver_nl80211.c BSS context
and as such, the bss->added_if is not set. Fix this by verifying whether
the request is for another ifindex and if so, removing the interface
even if added_if is not marked.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 12:41:32 +02:00
Ilan Peer
6f72577f29 P2P: Handle INTERFACE_DISABLED event on a P2P GO interface
An INTERFACE_DISABLED event received on an interface that is
currently operating a P2P GO means that the group session ended.
In such a case, if the interface was dynamically added remove it, and
if not, remove all the network blocks that are temporary, assuming
that if needed a new session will be started by an external entity.

The use case was triggering rfkill (both SW and HW). This case popped up
as part of a testing cycle, where after a toggle in the rfkill state,
the result was that the interface was not deleted, but on the other hand
the wpa_supplicant did not configure the kernel to re-start the AP
functionality again.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-24 12:29:20 +02:00
Mohammed Shafi Shajakhan
336167c80e AP: Fix inactivity STA timer trigger for driver offload case
Some non-mac80211 drivers, such as ath6kl, support STA inactivity timer
in firmware and may not provide connected stations' idle time to the
userspace. If the driver indicates support for offloaded operation, do
not start the inactivity timer in the hostapd.

Signed-hostap: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
2013-11-24 12:01:55 +02:00
Loic Poulain
1245503188 Restore scan_req if sta scan is rescheduled in the scan results event
On scan results event if a concurrent P2P scan was triggered previously,
scan results processing is canceled, p2p_find executed, and a new sta
scan is triggered (pending scan). However, this new sta scan does not
restore the scan_req value of the previous scan (whose scan result has
been canceled).

If we are currently connected to an AP and use ap_scan=2, the new
triggered scan will cause an associtation-without-scan in
wpa_supplicant_scan:
(ap_scan == 2 & scan_req != MANUAL_SCAN_REQ)
	=> wpa_supplicant_assoc_try()
causing an association error and a disconnection.

This patch fixes this issue by restoring the previous scan_req value.

Signed-off-by: Loic Poulain <loicx.poulain@intel.com>
2013-11-24 11:47:30 +02:00
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Janusz Dziedzic
80ed037f00 Clear beacon_data before usage
struct beacon_data contains a lot of pointers. Make sure it gets cleared
to zero if hostapd_build_beacon_data() gets called from a path that does
not clear the structure first.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-11-22 23:21:43 +02:00
Dmitry Shmidt
982189632f Android: Revert static field back to send_and_recv_msgs()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 23:12:40 +02:00
Dmitry Shmidt
3c2e82f101 Android: wpa_supplicant: Use Ver 0.8.X as default
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 20:42:00 +02:00
Dmitry Shmidt
a94737ea38 Android: P2P: Remember country locale
This updates P2P modules based on the Android specific
DRIVER COUNTRY command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 20:23:16 +02:00
Jouni Malinen
5e2c3490d5 Android: Add driver_cmd for arbitrary driver commands
This is a mechanism used in Android to extend driver interface in vendor
specific ways. This is included only for the purpose of Android
compatibility. Proper interface commands should be used for any new
functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:08 +02:00
Jouni Malinen
0de3803610 Android: Add P2P/WPS wrappers for private lib
Android uses a vendor specific library for implementing couple of driver
interface functions. Add the wrapper code to allow that mechanism to be
used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:03 +02:00
Dmitry Shmidt
7b74c0acfb Android: Clean entire socket directory
Despite interface (and group) related sockets are not used
for control, they are created and may be left.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 18:03:24 +02:00
Marek Kwaczynski
92ecda40e0 hostapd: Set proper VHT capabilities
Set VHT capabilities defined in config file instead only supported
by the driver.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:03:04 +02:00
Marek Kwaczynski
77a3e796e1 hostapd: Fix set beacon in multiple BSSID scenario
Check if the BSS interface has started before setting beacon.
Lack of this condition can cause segmantation fault.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:02:56 +02:00
Sunil Dutt
179fc5527d TDLS: Do not reenable TDLS link on retransmitted setup frame
A reenable of the TDLS link while the host driver is already processing
the same (due to the retransmitted M2/M3 frames) might result in a
failed TDLS setup handshake due to some host driver's implementation.
Thus, issue enable link only when the peer's TDLS status signifies no
prior link (tpk_success=0).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-22 17:47:09 +02:00
Jouni Malinen
cc14091eab VHT: Fix memory leak in STA entry
Commit de3cdf354a adding copying of the
STA's VHT capabilities into the STA entry on the AP. This was done in
allocated memory, but that new memory allocation was not freed anywhere.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-22 17:46:22 +02:00
Jouni Malinen
01370f49a6 tests: Verify that re-invoked P2P group is identified as persistent
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-21 11:39:12 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Jouni Malinen
461e3ebe43 Fix and work around some MinGW compilation issues
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 23:12:33 +02:00
Jouni Malinen
81cbc046fe Fix compiler warning for OpenSSL without HAVE_OCSP
Commit 080585c01a added ssl_ctx outside
ifdef HAVE_OCSP block that was the only user for this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 23:12:33 +02:00
Michal Kazior
68d628accd hostapd: Fix interface enabling/disabling and DFS
The 'started' state was tracked incorrectly. It also broke DFS
as it was using hostapd_enable/disable_iface() functions.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-11-20 22:29:35 +02:00
Jithu Jance
1cba9bea96 STA: Cancel sched_scan while initiating wps_reassoc
Scan initiated from wps_nfc command context was ketp on
getting rescheduled due to an on-going scheduled scan. So
cancel sched_scan before issuing a reassociation scan.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-20 22:28:28 +02:00
Jouni Malinen
215a02f359 Add Wi-Fi Direct to the build configuration example
In addition, include Wi-Fi Direct support for Android builds by
default.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 20:49:48 +02:00
Paul Stewart
ca9c14fb0a dbus_new: Add documentation for D-Bus TDLS methods
Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-20 16:39:34 +02:00