Commit graph

12152 commits

Author SHA1 Message Date
Jouni Malinen
b301f54e55 IBSS/mesh: Skip VHT channel setup with vht_disabled=1
If the VHT capability override vht_disabled=1 is used in the network
profile, skip VHT configuration of the local channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 18:31:54 +02:00
Masashi Honma
adc6a5d81a mesh: Check remote peer HT Operation element
The remote mesh STA which had configuration disable_ht40=1 could have HT
Capabilities element which includes Supported Channel Width Set = 1
(both 20 MHz and 40 MHz operation is supported) even though it had HT
Operation element which includes STA Channel Width = 0 (20 MHz channel
width only). Previously, local peer recognized such a remote peer as 40
MHz band width enabled STA because local peer only checked HT
Capabilities element. This could cause disconnection between
disable_ht40=1 mesh STA and disable_ht40=0 mesh STA. They could
establish a mesh BSS but could not ping with ath9k_htc device. This
commit fixes the issue by refering HT Operation element.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 18:04:21 +02:00
Masashi Honma
9eb5757a86 Define helper function set_disable_ht40()
This functionality can be used outside wpa_set_disable_ht40(), so move
the generic part to a helper function.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 18:04:21 +02:00
Masashi Honma
7813b7c34d nl80211: Fix a memory leak on deinit with HT enabled mesh
Commit a70cd0db87 ('nl80211: Don't
register for Beacon frames for IEEE 802.11ad AP') could cause a trailing
memory leak on IEEE 802.11n enabled mesh. This commit fixes the issue.

-----------------
ELOOP: remaining socket: sock=12 eloop_data=0xba8260 user_data=0xbb3d90 handler=0x4aeb90
WPA_TRACE: eloop unregistered socket handler: 0x4aeb90
     nl80211_recv_beacons() ../src/drivers/driver_nl80211.c:625
WPA_TRACE: eloop sock - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant() [0x431f2a]
     eloop_sock_table_add_sock() ../src/utils/eloop.c:360
[1]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4b0e49]
     nl80211_register_eloop_read() ../src/drivers/driver_nl80211.c:153
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4bacf0]
     dl_list_add() src/utils/list.h:30
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:728
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: eloop sock - END
MEMLEAK[0xba81b0]: len 72
WPA_TRACE: memleak - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant(os_malloc+0x57) [0x430d67]
     os_malloc() ../src/utils/os_unix.c:690
[1]: ./hostap/wpa_supplicant/wpa_supplicant(os_zalloc+0xe) [0x430fce]
     os_zalloc() ../src/utils/os_unix.c:749
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4babaa]
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:692
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: memleak - END
MEMLEAK: total 72 bytes
-----------------

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 17:55:10 +02:00
Jouni Malinen
5edd051961 tests: wpa_supplicant mesh with dynamic interface and removal
This is a regression test case for SIGSEGV in
wpa_supplicant_remove_iface() if the main interface is removed while a
separate mesh interface is in use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 17:42:02 +02:00
Saurav Babu
6b585f420a mesh: Fix crash on removing virtual mesh interface
If a virtual mesh interface has been created and is still operational
when the main interface is removed (e.g., Wi-Fi hardware ejected), the
following crash occurred with the below backtrace:

WPA_TRACE: eloop SIGSEGV - START
[1]: /usr/local/sbin/wpa_supplicant() [0x44ef7e]
     eloop_sigsegv_handler() home/saurav/hostap/wpa_supplicant/../src/utils/eloop.c:123
[2]: /lib/x86_64-linux-gnu/libc.so.6(+0x36d40) [0x7f4c395cfd40]
[3]: /usr/local/sbin/wpa_supplicant(wpa_supplicant_remove_iface+0xd0) [0x57f500]
     wpa_supplicant_remove_iface() home/saurav/hostap/wpa_supplicant/wpa_supplicant.c:5338
[4]: /usr/local/sbin/wpa_supplicant() [0x57fbef]
     wpa_supplicant_deinit_iface() home/saurav/hostap/wpa_supplicant/wpa_supplicant.c:5069
[5]: /usr/local/sbin/wpa_supplicant(wpa_supplicant_remove_iface+0xc5) [0x57f4f5]
     wpa_supplicant_remove_iface() home/saurav/hostap/wpa_supplicant/wpa_supplicant.c:5343
[6]: /usr/local/sbin/wpa_supplicant(wpas_dbus_handler_remove_interface+0x8d) [0x55baad]
     wpas_dbus_handler_remove_interface() home/saurav/hostap/wpa_supplicant/dbus/dbus_new_handlers.c:679
[7]: /usr/local/sbin/wpa_supplicant() [0x5560cb]
     msg_method_handler() home/saurav/hostap/wpa_supplicant/dbus/dbus_new_helpers.c:354
     message_handler() home/saurav/hostap/wpa_supplicant/dbus/dbus_new_helpers.c:410
[8]: /lib/x86_64-linux-gnu/libdbus-1.so.3(+0x1be86) [0x7f4c39979e86]
[9]: /lib/x86_64-linux-gnu/libdbus-1.so.3(dbus_connection_dispatch+0x381) [0x7f4c3996ca21]
[10]: /usr/local/sbin/wpa_supplicant() [0x567148]
     dispatch_data() home/saurav/hostap/wpa_supplicant/dbus/dbus_common.c:36
[11]: /usr/local/sbin/wpa_supplicant() [0x5674a7]
     process_watch() home/saurav/hostap/wpa_supplicant/dbus/dbus_common.c:75
     process_watch_read() home/saurav/hostap/wpa_supplicant/dbus/dbus_common.c:90
[12]: /usr/local/sbin/wpa_supplicant() [0x44f297]
     eloop_sock_table_dispatch() home/saurav/hostap/wpa_supplicant/../src/utils/eloop.c:598
[13]: /usr/local/sbin/wpa_supplicant(eloop_run+0x1fe) [0x44ff1e]
     eloop_run() home/saurav/hostap/wpa_supplicant/../src/utils/eloop.c:1219
[14]: /usr/local/sbin/wpa_supplicant(wpa_supplicant_run+0x77) [0x57fd87]
     wpa_supplicant_run() home/saurav/hostap/wpa_supplicant/wpa_supplicant.c:5608
[15]: /usr/local/sbin/wpa_supplicant(main+0x3a8) [0x43ba88]
     main() home/saurav/hostap/wpa_supplicant/main.c:392
WPA_TRACE: eloop SIGSEGV - END
Aborted (core dumped)

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-01-29 17:42:02 +02:00
Jouni Malinen
3ca712028d tests: Remove mesh before trying to clear BSS cache
The flush_scan_cache() operations in the finally part of these test
cases ended up getting called when the mesh group was still operating.
This could result in unexpected behavior due to offchannel scan being
performed before the device becomes idle. Clean this up by explicitly
removing the mesh group before cleaning up.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 16:27:07 +02:00
Jouni Malinen
8b19401679 tests: Comment out CONFIG_DEBUG_KOBJECT_RELEASE from default config
This kernel debugging option adds multiple seconds of extra latency to
interface removal operations. While this can be worked around by
increasing timeouts in number of test cases, there does not seem to be
any clean way of working around this for PMKSA cacheching test with
per-STA VIFs (e.g., pmksa_cache_preauth_vlan_used_per_sta_vif).

To avoid unnecessary test failures, remove CONFIG_DEBUG_KOBJECT_RELEASE
from the default config. If someone wants to test with this kernel debug
option, it can be enabled for custom kernel builds while understanding
that it can result in false failure reports and significantly extended
time needed to complete full testing run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 16:06:44 +02:00
Jouni Malinen
97ad4d2071 tests: Increase timeout in ap_vlan_iface_cleanup_multibss*
If the kernel is built with CONFIG_DEBUG_KOBJECT_RELEASE=y, the cleanup
steps were taking so long that these test cases could fail.

Fix this by increasing the timeout to avoid reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:42:05 +02:00
Jouni Malinen
086d3cc2dc tests: FILS SK using ERP and roam to another SSID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-29 14:32:17 +02:00
Jouni Malinen
20032ba682 tests: FILS SK HLP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-29 14:32:17 +02:00
Jouni Malinen
5208160b4b FILS: Parse received FILS HLP requests
This adds parsing of received FILS HLP requests from (Re)Association
Request frames. The reassembled requests are verified to be in valid
format and are printed in debug output. However, actual processing or
forwarding of the packets is not yet implemented, i.e., the vendor
specific frame filtering logic is for now practically dropping all HLP
requests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-29 14:32:17 +02:00
Jouni Malinen
5732b770f4 FILS: Allow FILS HLP requests to be added
The new wpa_supplicant control interface commands FILS_HLP_REQ_FLUSH and
FILS_HLP_REQ_ADD can now be used to request FILS HLP requests to be
added to the (Re)Association Request frame whenever FILS authentication
is used.

FILS_HLP_REQ_ADD parameters use the following format:
<destination MAC address> <hexdump of payload starting from ethertype>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-29 14:32:17 +02:00
Jouni Malinen
df20cdc457 tests: Increase timeout in ap_bss_config_file for CTRL-EVENT-TERMINATING
If the kernel is built with CONFIG_DEBUG_KOBJECT_RELEASE=y, the hostapd
termination event for the wlan3 interface may be delayed beyond the
previous five second timeout. This could result in the test case failing
and the following test case failing as well due to the separate hostapd
process being still in the process of cleaning up.

Fix this by increasing the timeout to avoid forcing test termination in
such cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:32:17 +02:00
Jouni Malinen
96a8cc881b tests: Fix OpenSSL capability check in suite_b_192_mic_failure
This needs to check for 192-bit level instead of 128-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:32:17 +02:00
Jouni Malinen
326720c1db tests: Split proxyarp test cases into IPv4 and IPv6 parts
This is useful for now since the IPv6 support for proxyarp is not yet
included in the upstream kernel. This allows the IPv4 test cases to pass
with the current upstream kernel while allowing the IPv6 test cases to
report SKIP instead of FAIL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:32:17 +02:00
Jouni Malinen
371920b941 tests: Step-by-step guide for testing in VM
This describes example steps on how to get the VM testing setup with
parallel VMs configured with Ubuntu Server 16.04.1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:32:17 +02:00
Jouni Malinen
0d46095ec8 tests: Skip rrm_link_measurement tests if kernel support is not available
rrm_link_measurement and rrm_link_measurement_oom test cases were
causing incorrect failures when executed with a kernel version that does
not modify mac80211_hwsim to support TX power insertion. Fix this by
checking for that capability and skipping the test cases if the kernel
does not support this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 01:32:25 +02:00
Jouni Malinen
b85eaca0ab tests: Update example VM kernel config
This is now based on Linux 4.10.0-rc5.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 01:32:25 +02:00
Jouni Malinen
a1aa2aebc2 Remove unused WLAN_CIPHER_SUITE_* definitions
This gets rid of an unnecessary duplication of the definitions since all
the code has now been moved to using the earlier RSN_CIPHER_SUITE_*
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:05:44 +02:00
Jouni Malinen
a042e39acf nl80211: Use RSN_CIPHER_SUITE_* instead of WLAN_CIPHER_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:04:44 +02:00
Jouni Malinen
2373a31170 Define all RSN_CIPHER_SUITE_* values
This adds the cipher suite selector values for ciphers that are not
really used with RSN, but are needed to be able to replace
WLAN_CIPHER_SUITE_* definitions with RSN_CIPHER_SUITE_*.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:03:34 +02:00
Jouni Malinen
89ba101e14 Remove unused WLAN_AKM_SUITE_* definitions
This gets rid of an unnecessary duplication of the definitions since all
the code has now been moved to using the earlier RSN_AUTH_KEY_MGMT_*
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:36:13 +02:00
Jouni Malinen
bf9f8a0525 Use RSN_AUTH_KEY_MGMT_* instead of WLAN_AKM_SUITE_* for wpa_akm_to_suite()
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:34:49 +02:00
Jouni Malinen
3aa24db953 nl80211: Use RSN_AUTH_KEY_MGMT_* instead of WLAN_AKM_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:27:48 +02:00
Jouni Malinen
a1343fa6ba Remove unnecessary ifdef from RSN_AUTH_KEY_MGMT_* definitions
These FT AKM suite selectors might be needed in code even if
CONFIG_IEEE80211R is not defined.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:26:25 +02:00
Jouni Malinen
afe731004b Fix CONFIG_SAE build without CONFIG_SME
The control interface code was using wpa_s->sme in an area that was not
within ifdef CONFIG_SME.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 11:58:26 +02:00
Jouni Malinen
34e8bfd7a9 Skip EVENT_ACS_CHANNEL_SELECTED also without CONFIG_AP
CONFIG_ACS alone should not refer to wpa_s->ap_iface to avoid potential
compilation issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 11:57:23 +02:00
Jouni Malinen
510fc2dfc9 Fix AKM suite selectors for FILS and Suite B
IEEE 802.11 standard defines the suite selectors in <OUI>:<subtype>
format where OUI uses hexadecimal format and subtype decimal format.
These WLAN_AKM_SUITE_* definitions ended up getting written incorrectly
by interpretting the decimal part as hexadecimal and as such, by having
an incorrect value. However, the older RSN_AUTH_KEY_MGMT_* values were
defined with correct values and those definitions were used in most
locations.

This commit fixes the AKM suite selector values in RADIUS WLAN-AKM-Suite
attribute for FILS and Suite B. In addition, the AKM values used in
nl80211 driver configuration (NL80211_ATTR_AKM_SUITES) are fixed for the
Suite B cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-27 23:13:10 +02:00
Sunil Dutt
d7d0f909f1 QCA vendor command to carry the reason for power save failure
This commit defines a QCA vendor command
QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE that carries required
information leading to the power save failure. This will be an event
from the host driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 18:47:16 +02:00
Jouni Malinen
1d2e6a451a tests: GAS comeback delay that is longer than query timeout
This is a regression test for comeback delay values larger than
GAS_QUERY_TIMEOUT_PERIOD causing timeouts for the query.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 07:02:30 +02:00
vamsi krishna
53b38209f4 GAS: Cancel gas_query_timeout when AP responds with comeback delay
When AP responds with comeback delay for initial GAS query sent by STA,
gas_query_timeout should be cancelled to avoid GAS failures when
comeback delay is more than GAS_QUERY_TIMEOUT_PERIOD. The
gas_query_timeout is getting registered again when tx_status is received
for GAS comeback request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 07:02:30 +02:00
Jouni Malinen
d5bd941339 MBO: Silence a compiler warning when building without CONFIG_MBO
The fail label is used only within ifdef CONFIG_MBO, so declare it in
the same manner.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 06:41:47 +02:00
Purushottam Kushwaha
4c4070005a QCA vendor command to enable host driver offload ACS to user space
This commit introduces the QCA vendor command and the attributes which
facilitate the host driver to use an external user space entity for
performing automatic channel selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 06:32:59 +02:00
Jouni Malinen
6363396325 tests: Secure mesh network and PMKSA caching and external storage
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 18:27:19 +02:00
Masashi Honma
4d77d80edd mesh: Add MESH_PMKSA_GET/ADD commands
These commnds are mesh version of PMKSA_GET/ADD commands. So the usage
and security risk is similar to them. Refer to
commit 3459381dd2 ('External persistent
storage for PMKSA cache entries') also.

The MESH_PMKSA_GET command requires peer MAC address or "any" as an
argument and outputs appropriate stored PMKSA cache. And the
MESH_PMKSA_ADD command receives an output of MESH_PMKSA_GET and re-store
the PMKSA cache into wpa_supplicant. By using re-stored PMKSA cache,
wpa_supplicant can skip commit message creation which can use
significant CPU resources.

The output of the MESH_PMKSA_GET command uses the following format:
<BSSID> <PMKID> <PMK> <expiration in seconds>

The example of MESH_PMKSA_ADD command is this.
MESH_PMKSA_ADD 02:00:00:00:03:00 231dc1c9fa2eed0354ea49e8ff2cc2dc cb0f6c9cab358a8146488566ca155421ab4f3ea4a6de2120050c149b797018fe 42930
MESH_PMKSA_ADD 02:00:00:00:04:00 d7e595916611640d3e4e8eac02909c3c eb414a33c74831275f25c2357b3c12e3d8bd2f2aab6cf781d6ade706be71321a 43180

This functionality is disabled by default and can be enabled with
CONFIG_PMKSA_CACHE_EXTERNAL=y build configuration option.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-14 18:07:46 +02:00
Jouni Malinen
117875db33 D-Bus: Add GroupMgmt entry into the interface Capabilities dict
This can be used to determine whether the driver supports PMF and if so,
with which group management cipher suites. In addition, add the missing
pairwise and group cipher suite values to the documentation while adding
this new entry there as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:41:20 +02:00
Stijn Tintel
3cdb4ac074 D-Bus: Add pmf to global capabilities
This indicates that the wpa_supplicant binary has been compiled with PMF
support.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:29:22 +02:00
Jouni Malinen
76055b4c61 tests: D-Bus Get/Set Pmf
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:28:25 +02:00
Stijn Tintel
adf8f45f8a D-Bus: Implement Pmf property
The Pmf property is documented in doc/dbus.doxygen, but does not exist,
so implement it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:28:00 +02:00
Jouni Malinen
b98706c14b RSN IBSS: Fix TK clearing on Authentication frame RX
When wpa_supplicant was processing a received Authentication frame (seq
1) from a peer STA for which there was already a TK configured to the
driver, debug log claimed that the PTK gets cleared, but the actual
call to clear the key was actually dropped due to AUTH vs. SUPP set_key
selection. Fix this by explicitly clearing the TK in case it was set
and an Authentication frame (seq 1) is received.

This fixes some cases where EAPOL-Key frames were sent encrypted using
the old key when a peer STA restarted itself and lost the key and had to
re-join the IBSS. Previously, that state required timing out the 4-way
handshake and Deauthentication frame exchange to recover.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 13:56:18 +02:00
Jouni Malinen
c5420f9c92 tests: Disable HT in ibss_rsn to avoid a strange issue with mac80211
When fixing the TK clearing on Authentication frame RX, an issue in
getting unicast frames through after re-joining the IBSS was hit. It is
not exactly clear why this happens, but the unicast frame from the STA
that re-joined the network gets lost in the frame reorder buffer of the
STA that remains in the network.

For now, this disables HT to avoid a strange issue with mac80211
frame reordering during the final test_connectivity() call. Once that is
figured out, these disable_ht=1 calls should be removed from the test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 13:54:02 +02:00
Jouni Malinen
f38de833e1 tests: AP dropping duplicate management frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-14 01:10:32 +02:00
Jouni Malinen
fa67debf4c Fix duplicate Reassociation Request frame dropping
Relational operators (==) have higher precedence than the ternary
conditional in C. The last_subtype check for association/reassociation
was broken due to incorrect assumption about the precedence. Fix this by
adding parenthesis around the ternary conditional.

The previous implementation worked for Association Request frames by
accident since WLAN_FC_STYPE_ASSOC_REQ happens to have value 0 and when
the last receive frame was an Association Request frame, the
sta->last_subtype == reassoc check was true and non-zero
WLAN_FC_STYPE_REASSOC_REQ was interpreted as true. However, this was
broken for Reassociation Request frame. reassoc == 1 in that case could
have matched received Association Response frame (subtype == 1), but
those are not received in AP mode and as such, this did not break other
behavior apart from not being able to drop duplicated Reassociation
Request frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-14 01:04:31 +02:00
Slava Monich
6ff92677a1 wext: Cancel send_rfkill timeout in deinit
Signed-off-by: Slava Monich <slava.monich@jolla.com>
2017-01-14 00:07:45 +02:00
Jouni Malinen
1e40cf22f4 tests: Fix peerkey_sniffer_check with tshark 1.10.6
It looks like the previous mechanism for catching older tshark versions
for EAPOL-Key key info field was not sufficient. Fix that to cover the
version used in Ubuntu 14.04.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-14 00:05:47 +02:00
Jouni Malinen
7f2905e0da tests: Mesh with two stations that can't reach each other directly (RSN)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 23:26:20 +02:00
Jouni Malinen
fcd3d6ce32 FILS: Fix PMK and PMKID derivation from ERP
This adds helper functions for deriving PMK and PMKID from ERP exchange
in FILS shared key authentication as defined in IEEE Std 802.11ai-2016,
12.12.2.5.2 (PMKSA key derivation with FILS authentication). These
functions is used to fix PMK and PMKID derivation which were previously
using the rMSK directly as PMK instead of following the FILS protocol to
derive PMK with HMAC from nonces and rMSK.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 21:07:40 +02:00
Jouni Malinen
ef495c78dd OpenSSL: Implement sha384_vector()
This was forgotten from the addition of SHA384 support and is now needed
for FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 21:05:19 +02:00
Dedy Lansky
a70cd0db87 nl80211: Don't register for Beacon frames for IEEE 802.11ad AP
Beacon frames are not supported in IEEE 802.11ad network (DMG-beacons
used instead). To allow hostapd to manage IEEE 802.11ad AP with
device_ap_sme disabled, skip nl80211_register_beacons() for IEEE
802.11ad AP.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-01-13 15:58:01 +02:00